summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dsi
AgeCommit message (Collapse)Author
2022-09-18drm/msm/dsi: Remove use of device_node in dsi_host_parse_dt()Nathan Chancellor
Clang warns: drivers/gpu/drm/msm/dsi/dsi_host.c:1903:14: error: variable 'device_node' is uninitialized when used here [-Werror,-Wuninitialized] of_node_put(device_node); ^~~~~~~~~~~ drivers/gpu/drm/msm/dsi/dsi_host.c:1870:44: note: initialize the variable 'device_node' to silence this warning struct device_node *endpoint, *device_node; ^ = NULL 1 error generated. device_node's assignment was removed but not all of its uses. Remove the call to of_node_put() and the variable declaration to clean up the warning. Fixes: 36246dd50225 ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE") Link: https://github.com/ClangBuiltLinux/linux/issues/1700 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/500182/ Link: https://lore.kernel.org/r/20220829165450.217628-1-nathan@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: switch to DRM_PANEL_BRIDGEDmitry Baryshkov
Currently the DSI driver has two separate paths: one if the next device in a chain is a bridge and another one if the panel is connected directly to the DSI host. Simplify the code path by using panel-bridge driver (already selected in Kconfig) and dropping support for handling the panel directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493608/ Link: https://lore.kernel.org/r/20220712132258.671263-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: fetch DSC pps payload from struct mipi_dsi_deviceDmitry Baryshkov
Now that struct mipi_dsi_device provides DSC data, fetch it from the mentioned struct rather than from the struct drm_panel itself. This would allow supporting MIPI DSI bridges handling DSC on their input side. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493307/ Link: https://lore.kernel.org/r/20220711094320.368062-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Remove the unneeded result variableye xingchen
Return the value msm_dsi_phy_enable() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/499621/ Link: https://lore.kernel.org/r/20220826072821.253150-1-ye.xingchen@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: drop the hpd workerDmitry Baryshkov
It makes no sense to have the HPD worker in the MSM DSI driver anymore. It is only queued from the dsi_host_attach/detach() callbacks, where it plays no useful role. Either way the panel or next bridge will be present and will report it's status directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498740/ Link: https://lore.kernel.org/r/20220822174417.292926-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Improve dsi_phy_driver_probe() probe error handlingDouglas Anderson
The dsi_phy_driver_probe() function has a "goto fail" for no reason. Change it to just always return directly when it sees an error. Make this simpler by leveraging dev_err_probe() which is designed to make code like this shorter / simpler. NOTE: as part of this, we now pass through error codes directly from msm_ioremap_size() rather than translating to -ENOMEM. This changed mostly because it's much more convenient when using dev_err_probe() and also it's usually encouraged not to hide error codes like the old code was doing unless there is a good reason. I can't see any reason why we'd need to return -ENOMEM instead of -EINVAL from the probe function. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496324/ Link: https://lore.kernel.org/r/20220804073608.v4.6.I969118a35934a0e5007fe4f80e3e28e9c0b7602a@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Take advantage of devm_regulator_bulk_get_const()Douglas Anderson
As of the commit 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") we no longer need to do copying of regulator bulk data from initdata to something dynamic. Let's take advantage of that. In addition to saving some code, this also moves us to using ARRAY_SIZE() to specify how many regulators we have which is less error prone. This gets rid of some layers of wrappers which makes it obvious that we can get rid of an extra error print. devm_regulator_bulk_get_const() prints errors for you so you don't need an extra layer of printing. In all cases here I have preserved the old settings without any investigation about whether the loads being set are sensible. In the cases of some of the PHYs if several PHYs in the same file used exactly the same settings I had them point to the same data structure. NOTE: Though I haven't done the math, this is likely an overall savings in terms of "static const" data. We previously always allocated space for 8 supplies. Each of these supplies took up 36 bytes of data (32 for name, 4 for an int). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496325/ Link: https://lore.kernel.org/r/20220804073608.v4.5.I55a9e65cb1c22221316629e98768ff473f47a067@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Use the new regulator bulk feature to specify the loadDouglas Anderson
As of commit 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API") we can now specify the initial load in the bulk data rather than having to manually call regulator_set_load() on each regulator. Let's use it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496319/ Link: https://lore.kernel.org/r/20220804073608.v4.4.I7b3c72949883846badb073cfeae985c55239da1d@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Don't set a load before disabling a regulatorDouglas Anderson
As of commit 5451781dadf8 ("regulator: core: Only count load for enabled consumers"), a load isn't counted for a disabled regulator. That means all the code in the DSI driver to specify and set loads before disabling a regulator is not actually doing anything useful. Let's remove it. It should be noted that all of the loads set that were being specified were pointless noise anyway. The only use for this number is to pick between low power and high power modes of regulators. Regulators appear to do this changeover at loads on the order of 10000 uA. You would need a lot of clients of the same rail for that 100 uA number to count for anything. Note that now that we get rid of the setting of the load at disable time, we can just set the load once when we first get the regulator and then forget it. It should also be noted that the regulator functions regulator_bulk_enable() and regulator_set_load() already print error messages when they encounter problems so while moving things around we get rid of some extra error prints. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496320/ Link: https://lore.kernel.org/r/20220804073608.v4.3.If1f94fbbdb7c1d0fb3961de61483a851ad1971a7@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_7nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491927/ Link: https://lore.kernel.org/r/20220629225331.357308-12-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_10nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491923/ Link: https://lore.kernel.org/r/20220629225331.357308-11-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_14nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491921/ Link: https://lore.kernel.org/r/20220629225331.357308-10-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491925/ Link: https://lore.kernel.org/r/20220629225331.357308-9-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm_8960: Replace parent names with clk_hw pointersMarijn Suijten
parent_hw pointers are easier to manage and cheaper to use than repeatedly formatting the parent name and subsequently leaving the clk framework to perform lookups based on that name. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491929/ Link: https://lore.kernel.org/r/20220629225331.357308-8-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi/phy: Replace hardcoded char-array length with sizeof()Marijn Suijten
Now that the last DSI PHY PLL driver (dsi_phy_28nm_8960) has been converted to use a simple stack-local char-array instead of a devm_kzalloc heap allocation we can safely call sizeof() on every string variable (that's now a sized array instead of a pointer) passed into snprintf instead of hardcoding the size. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491920/ Link: https://lore.kernel.org/r/20220629225331.357308-7-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi_phy_28nm_8960: Use stack memory for temporary clock namesMarijn Suijten
The clock names formatted into the hw_clk's init structure are only used for the duration of the registration function where they are kstrdup'ed, making it unnecessary to keep the allocations alive for the duration of the device (through devm). Just like the other DSI PHY PLL clock trees, use a stack-local char array and save on memory outside of the pll_28nm_register function. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491917/ Link: https://lore.kernel.org/r/20220629225331.357308-6-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi/phy: Reindent and reflow multiline function callsMarijn Suijten
The commit 613cbd1da3c9 ("drm/msm/dsi: use devm_clk_*register to registe DSI PHY clocks") introduced the devm_ prefix to clk_hw registration calls, without updating the indentation of the arguments on the following lines. Similarly commit e55b3fbbbbc8 ("drm/msm/dsi: drop PLL accessor functions") moved from pll_write to dsi_phy_write without updating the indentation of followup arguments either. Preparing for a series that heavily touches the clk calls, reflow and reindent function calls that are adhering to an 80-char column limit by spanning multiple lines. Where function names are very long the arguments are indented with a fixed number of two tab characters instead of aligning with the opening parenthesis of the function call. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491931/ Link: https://lore.kernel.org/r/20220629225331.357308-5-marijn.suijten@somainline.org [DB: adjusted commit message to make checkpatch happy] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: use drm_dsc_config instead of msm_display_dsc_configDmitry Baryshkov
There is no need to use the struct msm_display_dsc_config wrapper inside the dsi driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/493341/ Link: https://lore.kernel.org/r/20220711100432.455268-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Fix number of regulators for SDM660Douglas Anderson
1 regulator is listed but the number 2 is specified. This presumably means we try to get a regulator with no name. Fix it. Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496323/ Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfgDouglas Anderson
3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: fix the inconsistent indentingsunliming
Fix the inconsistent indenting in function msm_dsi_dphy_timing_calc_v3(). Fix the following smatch warnings: drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:350 msm_dsi_dphy_timing_calc_v3() warn: inconsistent indenting Fixes: f1fa7ff44056 ("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: sunliming <sunliming@kylinos.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/494662/ Link: https://lore.kernel.org/r/20220719015622.646718-1-sunliming@kylinos.cn Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-13Merge tag 'drm-msm-next-2022-07-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
2022-07-04drm/msm/dsi: Use single function for resetVladimir Lypak
There is currently two function for performing reset: dsi_sw_reset and dsi_sw_reset_restore. Only difference between those is that latter one assumes that DSI controller is enabled. In contrary former one assumes that controller is disabled and executed during power-on. However this assumtion is not true mobile devices which have boot splash set up by boot-loader. This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable DSI controller during reset sequence if it's enabled. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489152/ Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz [DB: fixed the typo in the commit message] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-06-22Merge tag 'drm-misc-next-2022-06-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.20: UAPI Changes: Cross-subsystem Changes: * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices * fbcon: Cleanups * fbdev: Disable firmware-device registration when first native driver loads * iosys-map: Documentation fixes Core Changes: * edid: Use struct drm_edid in more places * gem-cma-helper: Improve documentation * of: Add data-lane helpers and convert drivers * syncobj: Fixes Driver Changes: * amdgpu: Build fixes * ast: Support multiple outputs * bochs: Include <linux/module.h> * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes * display/dp: Documentation fixes * display/dp-mst: Read extended DPCD capabilities during system resume * logicvc: Add new driver * magag200: Build fixes * nouveau: Cleanups * panel: Add backlight support; nt36672a: DT backlight support * qxl: Cleanups * sun4i: HDMI PHY cleanups * vc4: Add support for BCM2711 * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups * vkms: Allocate output buffer with vmalloc(); Fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YqwriEhn0l4uO+Gn@linux-uq9g
2022-06-13drm/msm: Fix convert to drm_of_get_data_lanes_countMarek Vasut
Add missing header file into dsi_host.c and encode data-lanes string directly into the warning message in the driver to avoid build issues detected by lkp. Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
2022-06-12drm/msm: Convert to drm_of_get_data_lanes_countMarek Vasut
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de
2022-05-20Merge tag 'msm-next-5.19-fixes' of ↵Dave Airlie
https://gitlab.freedesktop.org/abhinavk/msm into drm-next 5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com
2022-05-18drm/msm/dsi: don't powerup at modeset time for parade-ps8640Douglas Anderson
Commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") caused sc7180 Chromebooks that use the parade-ps8640 bridge chip to fail to turn the display back on after it turns off. Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to handle the new power sequence. The Linux driver has almost nothing in it and most of the logic for this bridge chip is in black-box firmware that the bridge chip uses. Also unfortunately, reverting the patch will break "tc358762". The long term solution here is probably Dave Stevenson's series [1] that would give more flexibility. However, that is likely not a quick fix. For the short term, we'll look at the compatible of the next bridge in the chain and go back to the old way for the Parade PS8640 bridge chip. If it's found that other bridge chips also need this workaround then we can add them to the list or consider inverting the condition. However, the hope is that the framework will not take too much longer to land and we won't have to add anything other than ps8640 here. [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com Fixes: 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset time") Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220513131504.v5.1.Ia196e35ad985059e77b038a41662faae9e26f411@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-05-11Merge tag 'drm-msm-next-2022-05-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next - Fourcc modifier for tiled but not compressed layouts - Support for userspace allocated IOVA (GPU virtual address) - Devfreq clamp_to_idle fix - DPU: DSC (Display Stream Compression) support - DPU: inline rotation support on SC7280 - DPU: update DP timings to follow vendor recommendations - DP, DPU: add support for wide bus (on newer chipsets) - DP: eDP support - Merge DPU1 and MDP5 MDSS driver, make dpu/mdp device the master component - MDSS: optionally reset the IP block at the bootup to drop bootloader state - Properly register and unregister internal bridges in the DRM framework - Complete DPU IRQ cleanup - DP: conversion to use drm_bridge and drm_bridge_connector - eDP: drop old eDP parts again - DPU: writeback support - Misc small fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvJCr_1D8d0dgmyQC5HD4gmXeZw=bFV_CNCfceZbpMxRw@mail.gmail.com
2022-05-07drm/msm/dsi: pll_7nm: remove unsupported dividers for DSI pixel clockDmitry Baryshkov
Remove dividers that are not recommended for DSI DPHY mode when setting up the clock tree for the DSI pixel clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/484333/ Link: https://lore.kernel.org/r/20220501195620.4135080-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-07drm/msm/dsi: fix address for second DSI PHY on SDM660Dmitry Baryshkov
Correct a typo in the address of the second DSI PHY in the SDM660 device config. Fixes: 694dd304cc29 ("drm/msm/dsi: Add phy configuration for SDM630/636/660") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/484697/ Link: https://lore.kernel.org/r/20220503204340.935532-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dsi: use RMW cycles in dsi_update_dsc_timingDmitry Baryshkov
The downstream uses read-modify-write for updating command mode compression registers. Let's follow this approach. This also fixes the following warning: drivers/gpu/drm/msm/dsi/dsi_host.c:918:23: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable] Reported-by: kernel test robot <lkp@intel.com> Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/484305/ Link: https://lore.kernel.org/r/20220430175533.3817792-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dsi: fix error checks and return values for DSI xmit functionsDmitry Baryshkov
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code. This commits attempts to fix these issues both in TX and in RX paths. [1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/ Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/480501/ Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: Add support for DSC configurationVinod Koul
When DSC is enabled, we need to configure DSI registers accordingly and configure the respective stream compression registers. Add support to calculate the register setting based on DSC params and timing information and configure these registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480934/ Link: https://lore.kernel.org/r/20220406094031.1027376-15-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: Update generated headersVinod Koul
Update headers from mesa commit: commit 28ae397be111c37c6ced397e12d453a7695701bd Author: Vinod Koul <vkoul@kernel.org> Date: Fri Apr 1 16:53:04 2022 +0530 freedreno/registers: update dsi registers to support dsc Display Stream compression (DSC) compresses the display stream in host which is later decoded by panel. This requires addition of 3 new DSI registers to support DSC over DSI. Signed-off-by: Vinod Koul <vkoul@kernel.org> Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14967> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480932/ Link: https://lore.kernel.org/r/20220406094031.1027376-14-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: add mode valid callback for dsi_mgrVinod Koul
Add a mode valid callback for dsi_mgr for checking mode being valid in case of DSC. For DSC the height and width needs to be multiple of slice, so we check that here Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480930/ Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: Pass DSC params to drm_panelVinod Koul
When DSC is enabled, we need to get the DSC parameters from the panel driver, so add a dsc parameter in panel to fetch and pass DSC configuration for DSI panels to DPU encoder, which will enable and then configure DSC hardware blocks accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480910/ Link: https://lore.kernel.org/r/20220406094031.1027376-3-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: add support for dsc dataVinod Koul
Display Stream Compression (DSC) parameters need to be calculated. Add helpers and struct msm_display_dsc_config in msm_drv for this msm_display_dsc_config uses drm_dsc_config for DSC parameters. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480908/ Link: https://lore.kernel.org/r/20220406094031.1027376-2-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: don't store created planes, connectors and encodersDmitry Baryshkov
There is no point now in storing arrays of creates planes, connectors and encoders. Remove them from struct msm_drm_private. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/480945/ Link: https://lore.kernel.org/r/20220406101247.483649-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: properly add and remove internal bridgesDmitry Baryshkov
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-11drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()Stephen Boyd
The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <seanpaul@chromium.org> Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/478693/ Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-03-04drm/msm: Update generated headersRob Clark
Update headers from mesa commit: commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef Author: Rob Clark <robclark@freedesktop.org> AuthorDate: Wed Mar 2 17:11:10 2022 -0800 freedreno/registers: Add a couple regs we need for kernel Signed-off-by: Rob Clark <robdclark@chromium.org> Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221> Signed-off-by: Rob Clark <robdclark@chromium.org> [for display bits:] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com
2022-02-23drm/msm/dsi: Add support for qcm2290 dsi controllerLoic Poulain
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this controller version is not SoC specific, and already assigned to sc7180 for auto configuration, we rely on DSI block specific compatible string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point to the right dsi config handler. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474088/ Link: https://lore.kernel.org/r/1644853060-12222-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Allow to specify dsi config as pdataLoic Poulain
Config autodetect based on DSI controller version is quite limited since several qcom SoCs can integrate a DSI controller with the same version, but with different config (io_offset, supplies, etc). This change allows to specify dsi config via device data pointer. config autodetect is still used in case data pointer is NULL. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474089/ Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-19Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
2022-02-18drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY modeDmitry Baryshkov
The dsi_7nm_phy_enable() disagrees with downstream for glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update programmed settings to match downstream driver. To remove the possibility for such errors in future drop less_than_1500_mhz assignment and specify settings explicitly. Fixes: 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dsi: move DSI host powerup to modeset timeDmitry Baryshkov
The DSI subsystem does not fully fall into the pre-enable/enable system of callbacks, since typically DSI device bridge drivers expect to be able to communicate with DSI devices at the pre-enable() callback. The reason is that for some DSI hosts enabling the video stream would prevent other drivers from sending DSI commands. For example see the panel-bridge driver, which does drm_panel_prepare() from the pre_enable() callback (which would be called before our pre_enable() callback, resulting in panel preparation failures as the link is not yet ready). Therewere several attempts to solve this issue, but currently the best approach is to power up the DSI link from the mode_set() callback, allowing next bridge/panel to use DSI transfers in the pre_enable() time. Follow this approach. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20211207222901.988484-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dsi: Remove spurious IRQF_ONESHOT flagDaniel Thompson
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs (and for "normal" kernels it is a nop). In this case I can find no evidence that suppressing forced threading is intentional. Had it been intentional then a driver must adopt the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels (and avoid calling any kernel API that uses regular spinlocks). Fix this by removing the spurious additional flag. This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI with PREEMPT_RT enabled. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dsi: Add 10nm dsi phy tuning configuration supportRajeev Nandan
The clock and data lanes of the DSI PHY have a calibration circuitry feature. As per the MSM DSI PHY tuning guidelines, the drive strength tuning can be done by adjusting rescode offset for hstop/hsbot, and the drive level tuning can be done by adjusting the LDO output level for the HSTX drive. Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1643573719-32095-4-git-send-email-quic_rajeevny@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm/dsi: Add dsi phy tuning configuration supportRajeev Nandan
Add support for MSM DSI PHY tuning configuration. Current design is to support drive strength and drive level/amplitude tuning for 10nm PHY version, but this can be extended to other PHY versions. Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1643573719-32095-3-git-send-email-quic_rajeevny@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 10:16:00 +0000