summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dsi
AgeCommit message (Collapse)Author
2022-02-18drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parentMarijn Suijten
All DSI PHY/PLL drivers were referencing their VCO parent clock by a global name, most of which don't exist or have been renamed. These clock drivers seem to function fine without that except the 14nm driver for sdm6xx [1]. At the same time all DTs provide a "ref" clock as per the requirements of dsi-phy-common.yaml, but the clock is never used. This patchset puts that clock to use without relying on a global clock name, so that all dependencies are explicitly defined in DT (the firmware) in the end. Note that this patch intentionally breaks older firmware (DT) that relies on the clock to be found globally instead. The only affected platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is left in place to accommodate a more graceful transition period. All other platforms had the "ref" clock added to their phy node since its inception, or in a followup patch some time after. These patches wrongly assumed that the "ref" clock was actively used and have hence been listed as "Fixes:" below. Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of 27MHz pxo clock, which has been addressed in [3]. It is expected that both [2] and [3] are applied to the tree well in advance of this patch such that any actual breakage is extremely unlikely, but might still occur if kernel upgrades are performed without the DT to match. After some time the fallback for msm8974 can be removed again as well. [1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/ [2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/ [3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/ Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY") Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: reduce usage of round_pixclk callbackDmitry Baryshkov
The round_pixclk() callback returns different rate only on MDP4 in HDMI (DTV) case. Stop using this callback in other cases to simplify mode_valid callbacks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: drop dbgname argument from msm_ioremap*()Dmitry Baryshkov
msm_ioremap() functions take additional argument dbgname which is now unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/dsi: invalid parameter check in msm_dsi_phy_enableJosé Expósito
The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c8290284402b ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/dsi: Fix missing put_device() call in dsi_get_phyMiaoqian Lin
If of_find_device_by_node() succeeds, dsi_get_phy() doesn't a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: ec31abf ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211230070943.18116-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-12-16drm/msm: Don't use autosuspend for displayRob Clark
No functional change, as we only actually enable autosuspend for the GPU device. But lets not encourage thinking that autosuspend is a good idea for anything display related. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211215175910.1744151-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-08drm/msm/dsi: fix initialization in the bonded DSI caseDmitry Baryshkov
Commit 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") changed msm_dsi_modeset_init() to return an error code in case msm_dsi_manager_validate_current_config() returns false. However this is not an error case, but a slave DSI of the bonded DSI link. In this case msm_dsi_modeset_init() should return 0, but just skip connector and bridge initialization. To reduce possible confusion, drop the msm_dsi_manager_validate_current_config() function, and specif 'bonded && !master' condition directly in the msm_dsi_modeset_init(). Fixes: 739b4e7756d3 ("drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20211125180114.561278-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-06drm/msm: Allocate msm_drm_private early and pass it as driver dataAngeloGioacchino Del Regno
In preparation for registering the mdss interrupt controller earlier, move the allocation of msm_drm_private from component bind time to msm_drv probe; this also allows us to use the devm variant of kzalloc. Since it is not right to allocate the drm_device at probe time (as it should exist only when all components are bound, and taken down when components get cleaned up), the only way to make this happen is to pass a pointer to msm_drm_private as driver data (like done in many other DRM drivers), instead of one to drm_device like it's currently done in this driver. This is also simplifying some bind/unbind functions around drm/msm, as some of them are using drm_device just to grab a pointer to the msm_drm_private structure, which we now retrieve in one call. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211201105210.24970-2-angelogioacchino.delregno@collabora.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-06Merge remote-tracking branch 'drm/drm-next' into msm-next-stagingRob Clark
Backmerge drm-next to pull in: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: stop setting clock parents manuallyDmitry Baryshkov
There is no reason to set clock parents manually, use device tree to assign DSI/display clock parents to DSI PHY clocks. Dropping this manual setup allows us to drop repeating code and to move registration of hw clock providers to generic place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: untangle cphy setting from the src pll settingDmitry Baryshkov
Move DPHY/CPHY setting from msm_dsi_host_set_src_pll() to new function msm_dsi_host_set_phy_mode(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-22drm/msm/dsi: set default num_data_lanesPhilip Chen
If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver. According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-10-27drm/msm/dsi: Adjust probe orderRob Clark
Switch to the documented order dsi-host vs bridge probe. Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech
2021-10-21drm/msm/dsi: fix wrong type in msm_dsi_hostJessica Zhang
Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate from u32 to unsigned long, since clk_get_rate() returns an unsigned long. Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org> Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: use bulk clk APIDmitry Baryshkov
Use clk_bulk_* API instead of hand-coding them. Note, this drops support for legacy clk naming (e.g. "iface_clk" instead of just "iface"), however all in-kernel device trees were converted long long ago. The warning is present there since 2017. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002012715.691406-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: do not enable irq handler before powering up the hostDmitry Baryshkov
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state. Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to it. Call enable/disable_irq after msm_dsi_host_power_on/_off() functions, so that we can be sure that the interrupt is delivered when the host is in the known state. It is not possible to defer the interrupt enablement to a later point, because drm_panel_prepare might need to communicate with the panel over the DSI link and that requires working interrupt. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Add phy configuration for MSM8953Vladimir Lypak
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only difference from existing configurations are io_start addresses. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: dsi: Remove redundant null check before ↵Xu Wang
clk_prepare_enable/clk_disable_unprepare Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201231095616.25973-1-vulab@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Support NO_CONNECTOR bridgesRob Clark
For now, since we have a mix of bridges which support this flag, which which do *not* support this flag, or work both ways, try it once with NO_CONNECTOR and then fall back to the old way if that doesn't work. Eventually we can drop the fallback path. v2: Add missing drm_connector_attach_encoder() so display actually comes up when the bridge properly handles the NO_CONNECTOR flag Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920225801.227211-2-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: Use division result from div_u64_rem in 7nm and 14nm PLLMarijn Suijten
div_u64_rem provides the result of the division and additionally the remainder; don't use this function to solely calculate the remainder while calculating the division again with div_u64. A similar improvement was applied earlier to the 10nm pll in 5c191fef4ce2 ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers twice"). Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211011201642.167700-1-marijn.suijten@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handlingDan Carpenter
This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()Dan Carpenter
Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30e314 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123308.GF2283@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_readyMarijn Suijten
The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d999cb ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210906202552.824598-1-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi/phy: fix clock names in 28nm_8960 phyDmitry Baryshkov
The commit 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") mistakenly changed registered clock names. While the platform is in progress of migration to using clock properties in the dts rather than the global clock names, we should provide backwards compatibility. Thus restore registerd global clock names. Fixes: 9f91f22aafcd ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210921162245.1858118-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-17Merge tag 'drm-msm-next-2021-08-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next This is the main pull for v5.15, after the early pull request with drm/scheduler conversion: * New a6xx GPU support: a680 and 7c3 * dsi: 7nm phi, sc7280 support, test pattern generator support * mdp4 fixes for older hw like the nexus7 * displayport fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
2021-08-10drm/msm/dsi: add continuous clock support for 7nm PHYDmitry Baryshkov
Unlike previous generations, 7nm PHYs are required to collaborate with the host for continuos clock mode. Add changes neccessary to enable continuous clock mode in the 7nm DSI PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org [Fix merge conflict, and $description typo] Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-10drm/msm/dsi: Fix some reference counted resource leaksChristophe JAILLET
'of_find_device_by_node()' takes a reference that must be released when not needed anymore. This is expected to be done in 'dsi_destroy()'. However, there are 2 issues in 'dsi_get_phy()'. First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()' returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference won't be released in 'dsi_destroy()'. Secondly, as 'of_find_device_by_node()' already takes a reference, there is no need for an additional 'get_device()'. Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the unneeded 'get_device()' to solve both issues. Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660Konrad Dybcio
VDDA is not present and the specified load value is wrong. Fix it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728222057.52641-1-konrad.dybcio@somainline.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: stop calling set_encoder_mode callbackDmitry Baryshkov
None of the display drivers now implement set_encoder_mode callback. Stop calling it from the modeset init code. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-7-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add three helper functionsDmitry Baryshkov
Add three helper functions to be used by display drivers for setting up encoders. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-3-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: rename dual DSI to bonded DSIDmitry Baryshkov
We are preparing to support two independent DSI hosts in the DSI/DPU code. To remove possible confusion (as both configurations can be referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts driving single device, with clocks being locked) to "bonded DSI". Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [DB: add one extra hunk added by one previous patches] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add support for dsi test pattern generatorAbhinav Kumar
During board bringups its useful to have a DSI test pattern generator to isolate a DPU vs a DSI issue and focus on the relevant hardware block. To facilitate this, add an API which triggers the DSI controller test pattern. The expected output is a rectangular checkered pattern. This has been validated on a single DSI video mode panel by calling it right after drm_panel_enable() which is also the ideal location to use this as the DSI host and the panel have been initialized by then. Further validation on dual DSI and command mode panel is pending. If there are any fix ups needed for those, it shall be applied on top of this change. Changes in v2: - generate the new dsi.xml.h and update the bitfield names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: update dsi register header file for tpgAbhinav Kumar
Update the DSI controller header XML file to add registers and bitfields to support rectangular checkered pattern generator. Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-1-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> [DB: removed headergen commit changes] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Add DSI support for SC7280Rajeev Nandan
Add support for v2.5.0 DSI block in the SC7280 SoC. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1624365748-24224-4-git-send-email-rajeevny@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: Add PHY configuration for SC7280Rajeev Nandan
The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with different enable|disable regulator loads. Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1624365748-24224-3-git-send-email-rajeevny@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop msm_dsi_phy_get_shared_timingsDmitry Baryshkov
Instead of fetching shared timing through an extra function call, get them directly from msm_dsi_phy_enable. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: phy: use of_device_get_match_dataDmitry Baryshkov
Use of_device_get_match-data() instead of of_match_node(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210709210729.953114-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop gdsc regulator handlingDmitry Baryshkov
None of supported devies uses "gdsc" regulator for DSI. GDSC support is now implemented as a power domain. Drop old code and config handling gdsc regulator requesting and enabling. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210701000015.3347713-1-dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: support CPHY mode for 7nm pll/phyJonathan Marek
Add the required changes to support 7nm pll/phy in CPHY mode. This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable the CPHY mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-27Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-07-27drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling featuresNicolas Boichat
Many of the DSI flags have names opposite to their actual effects, e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually be disabled. Fix this by including _NO_ in the flag names, e.g. MIPI_DSI_MODE_NO_EOT_PACKET. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com> Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
2021-06-23drm/msm/dsi: do not enable PHYs when called for the slave DSI interfaceDmitry Baryshkov
Move the call to dsi_mgr_phy_enable after checking whether the DSI interface is slave, so that PHY enablement happens together with the host enablement. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: Generated register updateRob Clark
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5 Small bit of .c churn in the phy code to adapt to split up of phy related registers. Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm/dsi: print error code when MIPI DSI host registration failsDmitry Baryshkov
In order to ease debugging of DSI host registration issues, print return code of dsi_mgr_setup_components(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm/dsi: fix 32-bit clang warningArnd Bergmann
clang is a little overzealous with warning about a constant conversion in an untaken branch of a ternary expression: drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c:975:48: error: implicit conversion from 'unsigned long long' to 'unsigned long' changes value from 5000000000 to 705032704 [-Werror,-Wconstant-conversion] .max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000UL : ULONG_MAX, ^~~~~~~~~~~~ Rewrite this to use a preprocessor conditional instead to avoid the warning. Fixes: 076437c9e360 ("drm/msm/dsi: move min/max PLL rate to phy config") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210514213032.575161-1-arnd@kernel.org Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: Convert to use resource-managed OPP APIYangtao Li
Use resource-managed OPP API to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210314163408.22292-12-digetx@gmail.com Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23Merge branch 'msm-fixes-v5.13-rc6' into msm-next-redoRob Clark
Syncing up with -rc6 fixes to avoid conflicts with a660 patches. Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: fix display snapshotting if DP or DSI is disabledDmitry Baryshkov
Fix following warnings generated when either DP or DSI support is disabled: drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c:141:3: error: implicit declaration of function 'msm_dp_snapshot'; did you mean 'msm_dsi_snapshot'? [-Werror=implicit-function-declaration] drivers/gpu/drm/msm/msm_kms.h:127:26: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:867:21: error: initialization of 'void (*)(struct msm_disp_state *, struct msm_kms *)' from incompatible pointer type 'void (*)(struct msm_disp_state *, struct msm_kms *)' [-Werror=incompatible-pointer-types] drivers/gpu/drm/msm/dsi/dsi.h:94:30: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration Reported-by: kernel test robot <lkp@intel.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 1c3b7ac1a71d ("drm/msm: pass dump state as a function argument") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210527220330.3364716-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 10:02:21 +0000