summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dsi/dsi_host.c
AgeCommit message (Collapse)Author
2022-11-04drm/msm/dsi: Migrate to drm_dsc_compute_rc_parameters()Marijn Suijten
As per the FIXME this code is entirely duplicate with what is already provided inside drm_dsc_compute_rc_parameters(), supposedly because that function was yielding "incorrect" results while in reality the panel driver(s?) used for testing were providing incorrect parameters. For example, this code from downstream assumed dsc->bits_per_pixel to contain an integer value, whereas the upstream drm_dsc_config struct stores it with 4 fractional bits. drm_dsc_compute_rc_parameters() already accounts for this feat while the panel driver used for testing [1] wasn't, hence making drm_dsc_compute_rc_parameters() seem like it was returning an incorrect result. Other users of dsc->bits_per_pixel inside dsi_populate_dsc_params() also treat it in the same erroneous way, and will be addressed in a separate patch. In the end, using drm_dsc_compute_rc_parameters() spares both a lot of duplicate code and erratic behaviour. [1]: https://git.linaro.org/people/vinod.koul/kernel.git/commit/?h=topic/pixel3_5.18-rc1&id=1d7d98ad564f1ec69e7525e07418918d90f247a1 Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/508939/ Link: https://lore.kernel.org/r/20221026182824.876933-7-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Appropriately set dsc->mux_word_size based on bpcMarijn Suijten
This field is currently unread but will come into effect when duplicated code below is migrated to call drm_dsc_compute_rc_parameters(), which uses the bpc-dependent value of the local variable mux_words_size in much the same way. The hardcoded constant seems to be a remnant from the `/* bpc 8 */` comment right above, indicating that this group of field assignments is applicable to bpc = 8 exclusively and should probably bail out on different bpc values, until constants for other bpc values are added (or the current ones are confirmed to be correct across multiple bpc's). Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508943/ Link: https://lore.kernel.org/r/20221026182824.876933-6-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Reuse earlier computed dsc->slice_chunk_sizeMarijn Suijten
dsi_populate_dsc_params() is called prior to dsi_update_dsc_timing() and already computes a value for slice_chunk_size, whose value doesn't need to be recomputed and re-set here. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508934/ Link: https://lore.kernel.org/r/20221026182824.876933-5-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Use DIV_ROUND_UP instead of conditional increment on moduloMarijn Suijten
This exact same math is used to compute bytes_in_slice above in dsi_update_dsc_timing(), also used to fill slice_chunk_size. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508935/ Link: https://lore.kernel.org/r/20221026182824.876933-4-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Remove repeated calculation of slice_per_intfMarijn Suijten
slice_per_intf is already computed for intf_width, which holds the same value as hdisplay. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508933/ Link: https://lore.kernel.org/r/20221026182824.876933-3-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/dsi: Remove useless math in DSC calculationsMarijn Suijten
Multiplying a value by 2 and adding 1 to it always results in a value that is uneven, and that 1 gets truncated immediately when performing integer division by 2 again. There is no "rounding" possible here. After that target_bpp_x16 is used to store a multiplication of bits_per_pixel by 16 which is only ever read to immediately be divided by 16 again, and is elided in much the same way. Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/508932/ Link: https://lore.kernel.org/r/20221026182824.876933-2-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-18drm/msm/dsi: Remove use of device_node in dsi_host_parse_dt()Nathan Chancellor
Clang warns: drivers/gpu/drm/msm/dsi/dsi_host.c:1903:14: error: variable 'device_node' is uninitialized when used here [-Werror,-Wuninitialized] of_node_put(device_node); ^~~~~~~~~~~ drivers/gpu/drm/msm/dsi/dsi_host.c:1870:44: note: initialize the variable 'device_node' to silence this warning struct device_node *endpoint, *device_node; ^ = NULL 1 error generated. device_node's assignment was removed but not all of its uses. Remove the call to of_node_put() and the variable declaration to clean up the warning. Fixes: 36246dd50225 ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE") Link: https://github.com/ClangBuiltLinux/linux/issues/1700 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/500182/ Link: https://lore.kernel.org/r/20220829165450.217628-1-nathan@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: switch to DRM_PANEL_BRIDGEDmitry Baryshkov
Currently the DSI driver has two separate paths: one if the next device in a chain is a bridge and another one if the panel is connected directly to the DSI host. Simplify the code path by using panel-bridge driver (already selected in Kconfig) and dropping support for handling the panel directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493608/ Link: https://lore.kernel.org/r/20220712132258.671263-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: fetch DSC pps payload from struct mipi_dsi_deviceDmitry Baryshkov
Now that struct mipi_dsi_device provides DSC data, fetch it from the mentioned struct rather than from the struct drm_panel itself. This would allow supporting MIPI DSI bridges handling DSC on their input side. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/493307/ Link: https://lore.kernel.org/r/20220711094320.368062-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: drop the hpd workerDmitry Baryshkov
It makes no sense to have the HPD worker in the MSM DSI driver anymore. It is only queued from the dsi_host_attach/detach() callbacks, where it plays no useful role. Either way the panel or next bridge will be present and will report it's status directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498740/ Link: https://lore.kernel.org/r/20220822174417.292926-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Take advantage of devm_regulator_bulk_get_const()Douglas Anderson
As of the commit 1de452a0edda ("regulator: core: Allow drivers to define their init data as const") we no longer need to do copying of regulator bulk data from initdata to something dynamic. Let's take advantage of that. In addition to saving some code, this also moves us to using ARRAY_SIZE() to specify how many regulators we have which is less error prone. This gets rid of some layers of wrappers which makes it obvious that we can get rid of an extra error print. devm_regulator_bulk_get_const() prints errors for you so you don't need an extra layer of printing. In all cases here I have preserved the old settings without any investigation about whether the loads being set are sensible. In the cases of some of the PHYs if several PHYs in the same file used exactly the same settings I had them point to the same data structure. NOTE: Though I haven't done the math, this is likely an overall savings in terms of "static const" data. We previously always allocated space for 8 supplies. Each of these supplies took up 36 bytes of data (32 for name, 4 for an int). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496325/ Link: https://lore.kernel.org/r/20220804073608.v4.5.I55a9e65cb1c22221316629e98768ff473f47a067@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Use the new regulator bulk feature to specify the loadDouglas Anderson
As of commit 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API") we can now specify the initial load in the bulk data rather than having to manually call regulator_set_load() on each regulator. Let's use it. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496319/ Link: https://lore.kernel.org/r/20220804073608.v4.4.I7b3c72949883846badb073cfeae985c55239da1d@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: Don't set a load before disabling a regulatorDouglas Anderson
As of commit 5451781dadf8 ("regulator: core: Only count load for enabled consumers"), a load isn't counted for a disabled regulator. That means all the code in the DSI driver to specify and set loads before disabling a regulator is not actually doing anything useful. Let's remove it. It should be noted that all of the loads set that were being specified were pointless noise anyway. The only use for this number is to pick between low power and high power modes of regulators. Regulators appear to do this changeover at loads on the order of 10000 uA. You would need a lot of clients of the same rail for that 100 uA number to count for anything. Note that now that we get rid of the setting of the load at disable time, we can just set the load once when we first get the regulator and then forget it. It should also be noted that the regulator functions regulator_bulk_enable() and regulator_set_load() already print error messages when they encounter problems so while moving things around we get rid of some extra error prints. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/496320/ Link: https://lore.kernel.org/r/20220804073608.v4.3.If1f94fbbdb7c1d0fb3961de61483a851ad1971a7@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-09-18drm/msm/dsi: use drm_dsc_config instead of msm_display_dsc_configDmitry Baryshkov
There is no need to use the struct msm_display_dsc_config wrapper inside the dsi driver, use the struct drm_dsc_config directly to pass pps data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/493341/ Link: https://lore.kernel.org/r/20220711100432.455268-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-13Merge tag 'drm-msm-next-2022-07-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
2022-07-04drm/msm/dsi: Use single function for resetVladimir Lypak
There is currently two function for performing reset: dsi_sw_reset and dsi_sw_reset_restore. Only difference between those is that latter one assumes that DSI controller is enabled. In contrary former one assumes that controller is disabled and executed during power-on. However this assumtion is not true mobile devices which have boot splash set up by boot-loader. This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable DSI controller during reset sequence if it's enabled. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489152/ Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz [DB: fixed the typo in the commit message] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-06-22Merge tag 'drm-misc-next-2022-06-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.20: UAPI Changes: Cross-subsystem Changes: * dma-buf: Add sync-file API; Set DMA mask for udmabuf devices * fbcon: Cleanups * fbdev: Disable firmware-device registration when first native driver loads * iosys-map: Documentation fixes Core Changes: * edid: Use struct drm_edid in more places * gem-cma-helper: Improve documentation * of: Add data-lane helpers and convert drivers * syncobj: Fixes Driver Changes: * amdgpu: Build fixes * ast: Support multiple outputs * bochs: Include <linux/module.h> * bridge: adv7511: I2C fixes; anx7625: Fix error handling; lt6505: Kconfig fixes * display/dp: Documentation fixes * display/dp-mst: Read extended DPCD capabilities during system resume * logicvc: Add new driver * magag200: Build fixes * nouveau: Cleanups * panel: Add backlight support; nt36672a: DT backlight support * qxl: Cleanups * sun4i: HDMI PHY cleanups * vc4: Add support for BCM2711 * virt-gpu: Avoid NULL dereference; Fix error checks; Cleanups * vkms: Allocate output buffer with vmalloc(); Fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YqwriEhn0l4uO+Gn@linux-uq9g
2022-06-13drm/msm: Fix convert to drm_of_get_data_lanes_countMarek Vasut
Add missing header file into dsi_host.c and encode data-lanes string directly into the warning message in the driver to avoid build issues detected by lkp. Fixes: 185443efa26a ("drm/msm: Convert to drm_of_get_data_lanes_count") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
2022-06-12drm/msm: Convert to drm_of_get_data_lanes_countMarek Vasut
Convert driver to use this new helper to standardize OF "data-lanes" parsing. Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run> To: dri-devel@lists.freedesktop.org Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de
2022-05-02drm/msm/dsi: use RMW cycles in dsi_update_dsc_timingDmitry Baryshkov
The downstream uses read-modify-write for updating command mode compression registers. Let's follow this approach. This also fixes the following warning: drivers/gpu/drm/msm/dsi/dsi_host.c:918:23: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable] Reported-by: kernel test robot <lkp@intel.com> Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/484305/ Link: https://lore.kernel.org/r/20220430175533.3817792-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dsi: fix error checks and return values for DSI xmit functionsDmitry Baryshkov
As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code. This commits attempts to fix these issues both in TX and in RX paths. [1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/ Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/480501/ Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: Add support for DSC configurationVinod Koul
When DSC is enabled, we need to configure DSI registers accordingly and configure the respective stream compression registers. Add support to calculate the register setting based on DSC params and timing information and configure these registers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480934/ Link: https://lore.kernel.org/r/20220406094031.1027376-15-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: add mode valid callback for dsi_mgrVinod Koul
Add a mode valid callback for dsi_mgr for checking mode being valid in case of DSC. For DSC the height and width needs to be multiple of slice, so we check that here Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480930/ Link: https://lore.kernel.org/r/20220406094031.1027376-13-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: Pass DSC params to drm_panelVinod Koul
When DSC is enabled, we need to get the DSC parameters from the panel driver, so add a dsc parameter in panel to fetch and pass DSC configuration for DSI panels to DPU encoder, which will enable and then configure DSC hardware blocks accordingly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480910/ Link: https://lore.kernel.org/r/20220406094031.1027376-3-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm/dsi: add support for dsc dataVinod Koul
Display Stream Compression (DSC) parameters need to be calculated. Add helpers and struct msm_display_dsc_config in msm_drv for this msm_display_dsc_config uses drm_dsc_config for DSC parameters. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/480908/ Link: https://lore.kernel.org/r/20220406094031.1027376-2-vkoul@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Allow to specify dsi config as pdataLoic Poulain
Config autodetect based on DSI controller version is quite limited since several qcom SoCs can integrate a DSI controller with the same version, but with different config (io_offset, supplies, etc). This change allows to specify dsi config via device data pointer. config autodetect is still used in case data pointer is NULL. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474089/ Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-19Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
2022-02-18drm/msm/dsi: Remove spurious IRQF_ONESHOT flagDaniel Thompson
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs (and for "normal" kernels it is a nop). In this case I can find no evidence that suppressing forced threading is intentional. Had it been intentional then a driver must adopt the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels (and avoid calling any kernel API that uses regular spinlocks). Fix this by removing the spurious additional flag. This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI with PREEMPT_RT enabled. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: drop dbgname argument from msm_ioremap*()Dmitry Baryshkov
msm_ioremap() functions take additional argument dbgname which is now unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-12-16drm/msm: Don't use autosuspend for displayRob Clark
No functional change, as we only actually enable autosuspend for the GPU device. But lets not encourage thinking that autosuspend is a good idea for anything display related. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211215175910.1744151-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-06Merge remote-tracking branch 'drm/drm-next' into msm-next-stagingRob Clark
Backmerge drm-next to pull in: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: stop setting clock parents manuallyDmitry Baryshkov
There is no reason to set clock parents manually, use device tree to assign DSI/display clock parents to DSI PHY clocks. Dropping this manual setup allows us to drop repeating code and to move registration of hw clock providers to generic place. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-28drm/msm/dsi: untangle cphy setting from the src pll settingDmitry Baryshkov
Move DPHY/CPHY setting from msm_dsi_host_set_src_pll() to new function msm_dsi_host_set_phy_mode(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211006204828.1218225-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-22drm/msm/dsi: set default num_data_lanesPhilip Chen
If "data_lanes" property of the dsi output endpoint is missing in the DT, num_data_lanes would be 0 by default, which could cause dsi_host_attach() to fail if dsi->lanes is set to a non-zero value by the bridge driver. According to the binding document of msm dsi controller, the input/output endpoint of the controller is expected to have 4 lanes. So let's set num_data_lanes to 4 by default. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-11-18Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-10-27drm/msm/dsi: Adjust probe orderRob Clark
Switch to the documented order dsi-host vs bridge probe. Tested-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211025151536.1048186-22-maxime@cerno.tech
2021-10-21drm/msm/dsi: fix wrong type in msm_dsi_hostJessica Zhang
Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate from u32 to unsigned long, since clk_get_rate() returns an unsigned long. Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org> Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: use bulk clk APIDmitry Baryshkov
Use clk_bulk_* API instead of hand-coding them. Note, this drops support for legacy clk naming (e.g. "iface_clk" instead of just "iface"), however all in-kernel device trees were converted long long ago. The warning is present there since 2017. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002012715.691406-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm/dsi: do not enable irq handler before powering up the hostDmitry Baryshkov
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state. Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to it. Call enable/disable_irq after msm_dsi_host_power_on/_off() functions, so that we can be sure that the interrupt is delivered when the host is in the known state. It is not possible to defer the interrupt enablement to a later point, because drm_panel_prepare might need to communicate with the panel over the DSI link and that requires working interrupt. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm/msm: dsi: Remove redundant null check before ↵Xu Wang
clk_prepare_enable/clk_disable_unprepare Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201231095616.25973-1-vulab@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-11drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handlingDan Carpenter
This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-17Merge tag 'drm-msm-next-2021-08-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next This is the main pull for v5.15, after the early pull request with drm/scheduler conversion: * New a6xx GPU support: a680 and 7c3 * dsi: 7nm phi, sc7280 support, test pattern generator support * mdp4 fixes for older hw like the nexus7 * displayport fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs_tyanTeDGMH1X+Uf4wdyy7jYj-CinGXXVETiYOESahw@mail.gmail.com
2021-08-10drm/msm/dsi: add continuous clock support for 7nm PHYDmitry Baryshkov
Unlike previous generations, 7nm PHYs are required to collaborate with the host for continuos clock mode. Add changes neccessary to enable continuous clock mode in the 7nm DSI PHYs. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210805170817.3337665-1-dmitry.baryshkov@linaro.org [Fix merge conflict, and $description typo] Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: rename dual DSI to bonded DSIDmitry Baryshkov
We are preparing to support two independent DSI hosts in the DSI/DPU code. To remove possible confusion (as both configurations can be referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts driving single device, with clocks being locked) to "bonded DSI". Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [DB: add one extra hunk added by one previous patches] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: add support for dsi test pattern generatorAbhinav Kumar
During board bringups its useful to have a DSI test pattern generator to isolate a DPU vs a DSI issue and focus on the relevant hardware block. To facilitate this, add an API which triggers the DSI controller test pattern. The expected output is a rectangular checkered pattern. This has been validated on a single DSI video mode panel by calling it right after drm_panel_enable() which is also the ideal location to use this as the DSI host and the panel have been initialized by then. Further validation on dual DSI and command mode panel is pending. If there are any fix ups needed for those, it shall be applied on top of this change. Changes in v2: - generate the new dsi.xml.h and update the bitfield names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/1626922232-29105-2-git-send-email-abhinavk@codeaurora.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: drop gdsc regulator handlingDmitry Baryshkov
None of supported devies uses "gdsc" regulator for DSI. GDSC support is now implemented as a power domain. Drop old code and config handling gdsc regulator requesting and enabling. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210701000015.3347713-1-dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-08-07drm/msm/dsi: support CPHY mode for 7nm pll/phyJonathan Marek
Add the required changes to support 7nm pll/phy in CPHY mode. This adds a "qcom,dsi-phy-cphy-mode" property for the PHY node to enable the CPHY mode. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210617144349.28448-4-jonathan@marek.ca Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-27Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-07-27drm/dsi: Add _NO_ to MIPI_DSI_* flags disabling featuresNicolas Boichat
Many of the DSI flags have names opposite to their actual effects, e.g. MIPI_DSI_MODE_EOT_PACKET means that EoT packets will actually be disabled. Fix this by including _NO_ in the flag names, e.g. MIPI_DSI_MODE_NO_EOT_PACKET. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@samsung.com> Reviewed-by: Xin Ji <xji@analogixsemi.com> # anx7625.c Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> # msm/dsi Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210727094435.v3.1.I629b2366a6591410359c7fcf6d385b474b705ca2@changeid
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 14:51:37 +0000