summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/dp
AgeCommit message (Collapse)Author
2023-10-09drm/msm/dp: Inline dp_display_is_sink_count_zero()Stephen Boyd
This function is basically a one-liner when you ignore the debug logging. Just inline the function and drop the log to simplify the code. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/556066/ Link: https://lore.kernel.org/r/20230906181226.2198441-2-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: skip validity check for DP CTS EDID checksumJani Nikula
The DP CTS test for EDID last block checksum expects the checksum for the last block, invalid or not. Skip the validity check. For the most part (*), the EDIDs returned by drm_get_edid() will be valid anyway, and there's the CTS workaround to get the checksum for completely invalid EDIDs. See commit 7948fe12d47a ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read"). This lets us remove one user of drm_edid_block_valid() with hopes the function can be removed altogether in the future. (*) drm_get_edid() ignores checksum errors on CTA extensions. Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Stephen Boyd <swboyd@chromium.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/555361/ Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove dp_display_is_ds_bridge()Stephen Boyd
This function is simply drm_dp_is_branch() so use that instead of open-coding it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554989/ Link: https://lore.kernel.org/r/20230829184735.2841739-8-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Inline dp_link_parse_sink_count()Stephen Boyd
The function dp_link_parse_sink_count() is really just drm_dp_read_sink_count(). It debug prints out the bit for content protection (DP_SINK_CP_READY), but that is not useful beyond debug because 'link->dp_link.sink_count' is overwritten to only contain the sink_count in this same function. Just use drm_dp_read_sink_count() in the one place this function is called to simplify. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554987/ Link: https://lore.kernel.org/r/20230829184735.2841739-7-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Simplify with drm_dp_{max_link_rate, max_lane_count}()Stephen Boyd
These are open-coded versions of common functions. Replace them with the common code to improve readability. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554990/ Link: https://lore.kernel.org/r/20230829184735.2841739-6-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove aux_cfg_update_done and related codeStephen Boyd
The member 'aux_cfg_update_done' is always false. This is dead code that never runs. Remove it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554985/ Link: https://lore.kernel.org/r/20230829184735.2841739-5-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Remove dead code related to downstream cap infoStephen Boyd
We read the downstream port count and capability info but never use it anywhere. Remove 'ds_port_cnt' and 'ds_cap_info' and any associated code from this driver. Fold the check for 'dfp_present' into a call to drm_dp_is_branch() at the one place it is used to get rid of any member storage related to downstream ports. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554984/ Link: https://lore.kernel.org/r/20230829184735.2841739-4-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Use drm_dp_read_sink_count() helperStephen Boyd
Use the common function drm_dp_read_sink_count() instead of open-coding it. This shrinks the kernel text a tiny bit. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554983/ Link: https://lore.kernel.org/r/20230829184735.2841739-3-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-10-09drm/msm/dp: Replace open-coded drm_dp_read_dpcd_caps()Stephen Boyd
This function duplicates the common function drm_dp_read_dpcd_caps(). The array of DPCD registers filled in is one size larger than the function takes, but from what I can tell that extra byte was never used. Resize the array and use the common function to reduce the code here. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/554981/ Link: https://lore.kernel.org/r/20230829184735.2841739-2-swboyd@chromium.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-09-20drm/msm/dp: Add newlines to debug printksStephen Boyd
These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Fixes: 601f0479c583 ("drm/msm/dp: add logs across DP driver for ease of debugging") Fixes: cd779808cccd ("drm/msm/dp: Add basic PSR support for eDP") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/554533/ Link: https://lore.kernel.org/r/20230825230109.2264345-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-20drm/msm/dp: do not reinitialize phy unless retry during link trainingKuogee Hsieh
DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30 Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/551847/ Link: https://lore.kernel.org/r/1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com [quic_abhinavk@quicinc.com: added line break in commit text] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-09-09drm/msm: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the msm drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-32-u.kleine-koenig@pengutronix.de
2023-07-21drm: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-06-15drm/msm/dp: Free resources after unregistering themBjorn Andersson
The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542166/ Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dp: Drop aux devices together with DP controllerBjorn Andersson
Using devres to depopulate the aux bus made sure that upon a probe deferral the EDP panel device would be destroyed and recreated upon next attempt. But the struct device which the devres is tied to is the DPUs (drm_dev->dev), which may be happen after the DP controller is torn down. Indications of this can be seen in the commonly seen EDID-hexdump full of zeros in the log, or the occasional/rare KASAN fault where the panel's attempt to read the EDID information causes a use after free on DP resources. It's tempting to move the devres to the DP controller's struct device, but the resources used by the device(s) on the aux bus are explicitly torn down in the error path. The KASAN-reported use-after-free also remains, as the DP aux "module" explicitly frees its devres-allocated memory in this code path. As such, explicitly depopulate the aux bus in the error path, and in the component unbind path, to avoid these issues. Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/542163/ Link: https://lore.kernel.org/r/20230612220106.1884039-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-10Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi' and 'msm-next-lumag-mdp5' into msm-next-lumag Core: - Add Marijn Suijten as drm/msm reviewer - Adreno A660 bindings - SM8350 MDSS bindings fix DP: - Removed obsolete USB-PD remains - Documented DP compatible string for sm8550 platform DPU: - Added support for DPU on sm6350 and sm6375 platforms - Implemented tearcheck support to support vsync on SM150 and newer platforms - Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450 - Enabled writeback on sc7280 - Enabled DSC on msm8998 - Native HDMI output support - Dropped unused features: regdma, GC, IGC - Fixed the DSC flush operations - Simplified QoS handling, removing obsolete and unused features and merging SSPP and WB code paths - Reworked dpu_encoder initialisation path DSI: - Added support for DSI and 28nm DSI PHY on MSM8226 platform - Added support for DSI on sm6350 and sm6375 platforms - Dropped powerup quirks in favour of using pre_enable_prev_first for downstream bridges - Fixed 14nm DSI PHY programming MDP5: - Added support for display controller on MSM8226 platform Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-08drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disableKuogee Hsieh
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller case. HDP related interrupts can not be enabled until internal_hpd is set to true. At current implementation dp_display_config_hpd() will initialize DP host controller first followed by enabling HDP related interrupts if internal_hpd was true at that time. Enable HDP related interrupts depends on internal_hpd status may leave system with DP driver host is in running state but without HDP related interrupts being enabled. This will prevent external display from being detected. Eliminated this dependency by moving HDP related interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly regardless of internal_hpd status. Changes in V3: -- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable() -- rewording ocmmit text Changes in V4: -- replace dp_display_config_hpd() with dp_display_host_start() -- move enable_irq() at dp_display_host_start(); Changes in V5: -- replace dp_display_host_start() with dp_display_host_init() Changes in V6: -- squash remove enable_irq() and disable_irq() Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-06-04drm/msm/dp: Clean up pdev/dev duplication in dp_powerBjorn Andersson
The dp_power module keeps track of both the DP controller's struct platform_device and struct device - with the prior pulled out of the dp_parser module. Clean up the duplication by dropping the platform_device reference and just track the passed struct device. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/536939/ Link: https://lore.kernel.org/r/20230515030256.300104-3-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-04drm/msm/dp: Clean up logs dp_power moduleBjorn Andersson
The clk_bulk API already provides error messages indicating which specific clock in the request for which the operation failed, further more these errors are associated with the specific DisplayPort controller (rather than the shared drm_device). The additional error messages int he dp_power module does thereby not provide any benefit. While at it, none of the dp_power handles passed to these functions are dynamic in nature, so there should not be any need for runtime checking them. Drop these as well. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/536938/ Link: https://lore.kernel.org/r/20230515030256.300104-2-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-04drm/msm/dp: remove most of usbpd-related remainsDmitry Baryshkov
Remove most of remains of downstream usbpd code. Mainline kernel uses different approach for managing Type-C / USB-PD, so this remains unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/538270/ Link: https://lore.kernel.org/r/20230520182050.4014143-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-05-25drm/msm/dp: add module parameter for PSRAbhinav Kumar
On sc7280 where eDP is the primary display, PSR is causing IGT breakage even for basic test cases like kms_atomic and kms_atomic_transition. Most often the issue starts with below stack so providing that as reference Call trace: dpu_encoder_assign_crtc+0x64/0x6c dpu_crtc_enable+0x188/0x204 drm_atomic_helper_commit_modeset_enables+0xc0/0x274 msm_atomic_commit_tail+0x1a8/0x68c commit_tail+0xb0/0x160 drm_atomic_helper_commit+0x11c/0x124 drm_atomic_commit+0xb0/0xdc drm_atomic_connector_commit_dpms+0xf4/0x110 drm_mode_obj_set_property_ioctl+0x16c/0x3b0 drm_connector_property_set_ioctl+0x4c/0x74 drm_ioctl_kernel+0xec/0x15c drm_ioctl+0x264/0x408 __arm64_sys_ioctl+0x9c/0xd4 invoke_syscall+0x4c/0x110 el0_svc_common+0x94/0xfc do_el0_svc+0x3c/0xb0 el0_svc+0x2c/0x7c el0t_64_sync_handler+0x48/0x114 el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- [drm-dp] dp_ctrl_push_idle: PUSH_IDLE pattern timedout Other basic use-cases still seem to work fine hence add a a module parameter to allow toggling psr enable/disable till PSR related issues are hashed out with IGT. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/534420/ Link: https://lore.kernel.org/r/20230427232848.5200-1-quic_abhinavk@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-04-26drm/msm/dp: unregister audio driver during unbindSrinivas Kandagatla
while binding the code always registers a audio driver, however there is no corresponding unregistration done in unbind. This leads to multiple redundant audio platform devices if dp_display_bind and dp_display_unbind happens multiple times during startup. On X13s platform this resulted in 6 to 9 audio codec device instead of just 3 codec devices for 3 dp ports. Fix this by unregistering codecs on unbind. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/533324/ Link: https://lore.kernel.org/r/20230421145657.12186-1-srinivas.kandagatla@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-04-06drm/msm/dp: Fix spelling mistake "Capabiity" -> "Capability"Colin Ian King
There is a spelling mistake in a drm_dbg_dp message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/526658/ Link: https://lore.kernel.org/r/20230314082050.26331-1-colin.i.king@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dp: Return IRQ_NONE for unhandled interruptsDouglas Anderson
If our interrupt handler gets called and we don't really handle the interrupt then we should return IRQ_NONE. The current interrupt handler didn't do this, so let's fix it. NOTE: for some of the cases it's clear that we should return IRQ_NONE and some cases it's clear that we should return IRQ_HANDLED. However, there are a few that fall somewhere in between. Specifically, the documentation for when to return IRQ_NONE vs. IRQ_HANDLED is probably best spelled out in the commit message of commit d9e4ad5badf4 ("Document that IRQ_NONE should be returned when IRQ not actually handled"). That commit makes it clear that we should return IRQ_HANDLED if we've done something to make the interrupt stop happening. The case where it's unclear is, for instance, in dp_aux_isr() after we've read the interrupt using dp_catalog_aux_get_irq() and confirmed that "isr" is non-zero. The function dp_catalog_aux_get_irq() not only reads the interrupts but it also "ack"s all the interrupts that are returned. For an "unknown" interrupt this has a very good chance of actually stopping the interrupt from happening. That would mean we've identified that it's our device and done something to stop them from happening and should return IRQ_HANDLED. Specifically, it should be noted that most interrupts that need "ack"ing are ones that are one-time events and doing an "ack" is enough to clear them. However, since these interrupts are unknown then, by definition, it's unknown if "ack"ing them is truly enough to clear them. It's possible that we also need to remove the original source of the interrupt. In this case, IRQ_NONE would be a better choice. Given that returning an occasional IRQ_NONE isn't the absolute end of the world, however, let's choose that course of action. The IRQ framework will forgive a few IRQ_NONE returns now and again (and it won't even log them, which is why we have to log them ourselves). This means that if we _do_ end hitting an interrupt where "ack"ing isn't enough the kernel will eventually detect the problem and shut our device down. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520660/ Link: https://lore.kernel.org/r/20230126170745.v2.2.I2d7aec2fadb9c237cd0090a47d6a8ba2054bf0f8@changeid [DB: reformatted commit message to make checkpatch happy] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-04-06drm/msm/dp: Clean up handling of DP AUX interruptsDouglas Anderson
The DP AUX interrupt handling was a bit of a mess. * There were two functions (one for "native" transfers and one for "i2c" transfers) that were quite similar. It was hard to say how many of the differences between the two functions were on purpose and how many of them were just an accident of how they were coded. * Each function sometimes used "else if" to test for error bits and sometimes didn't and again it was hard to say if this was on purpose or just an accident. * The two functions wouldn't notice whether "unknown" bits were set. For instance, there seems to be a bit "DP_INTR_PLL_UNLOCKED" and if it was set there would be no indication. * The two functions wouldn't notice if more than one error was set. Let's fix this by being more consistent / explicit about what we're doing. By design this could cause different handling for AUX transfers, though I'm not actually aware of any bug fixed as a result of this patch (this patch was created because we simply noticed how odd the old code was by code inspection). Specific notes here: 1. In the old native transfer case if we got "done + wrong address" we'd ignore the "wrong address" (because of the "else if"). Now we won't. 2. In the old native transfer case if we got "done + timeout" we'd ignore the "timeout" (because of the "else if"). Now we won't. 3. In the old native transfer case we'd see "nack_defer" and translate it to the error number for "nack". This differed from the i2c transfer case where "nack_defer" was given the error number for "nack_defer". This 100% can't matter because the only user of this error number treats "nack defer" the same as "nack", so it's clear that the difference between the "native" and "i2c" was pointless here. 4. In the old i2c transfer case if we got "done" plus any error besides "nack" or "defer" then we'd ignore the error. Now we don't. 5. If there is more than one error signaled by the hardware it's possible that we'll report a different one than we used to. I don't know if this matters. If someone is aware of a case this matters we should document it and change the code to make it explicit. 6. One quirk we keep (I don't know if this is important) is that in the i2c transfer case if we see "done + defer" we report that as a "nack". That seemed too intentional in the old code to just drop. After this change we will add extra logging, including: * A warning if we see more than one error bit set. * A warning if we see an unexpected interrupt. * A warning if we get an AUX transfer interrupt when shouldn't. It actually turns out that as a result of this change then at boot we sometimes see an error: [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy That means that, during init, we are seeing DP_INTR_PLL_UNLOCKED. For now I'm going to say that leaving this error reported in the logs is OK-ish and hopefully it will encourage someone to track down what's going on at init time. One last note here is that this change renames one of the interrupt bits. The bit named "i2c done" clearly was used for native transfers being done too, so I renamed it to indicate this. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/520658/ Link: https://lore.kernel.org/r/20230126170745.v2.1.I90ffed3ddd21e818ae534f820cb4d6d8638859ab@changeid Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-03-13drm/msm/dp: set self refresh aware based on PSR supportVinod Polimera
For the PSR to kick in, self_refresh_aware has to be set. Initialize it based on the PSR support for the eDP interface. Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524743/ Link: https://lore.kernel.org/r/1677774797-31063-15-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-03-13drm/msm/dp: use the eDP bridge ops to validate eDP modesVinod Polimera
The eDP and DP interfaces shared the bridge operations and the eDP specific changes were implemented under is_edp check. To add psr support for eDP, we started using a new set of eDP bridge ops. We are moving the eDP specific code in the dp_bridge_mode_valid function to a new eDP function, edp_bridge_mode_valid under the eDP bridge ops. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524736/ Link: https://lore.kernel.org/r/1677774797-31063-11-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-03-13drm/msm/dp: Add basic PSR support for eDPVinod Polimera
Add support for basic panel self refresh (PSR) feature for eDP. Add a new interface to set PSR state in the sink from DPU. Program the eDP controller to issue PSR enter and exit SDP to the sink. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/524734/ Link: https://lore.kernel.org/r/1677774797-31063-10-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-03-13drm/msm/dp: use atomic callbacks for DP bridge opsVinod Polimera
Use atomic variants for DP bridge callback functions so that the atomic state can be accessed in the interface drivers. The atomic state will help the driver find out if the display is in self refresh state. Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/524731/ Link: https://lore.kernel.org/r/1677774797-31063-9-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-22Merge branch 'msm-next-lumag' into HEADDmitry Baryshkov
Merge display-related changes targeting Qualcomm DRM MSM driver. Notable changes: DPU, DSI, MDSS: - Support for SM8350, SM8450 SM8550 and SC8280XP platform Core: - Added bindings for SM8150 (driver support already present) DPU: - Partial support for DSC on SM8150 and SM8250 - Fixed color transformation matrix being lost on suspend/resume DP: - Support for DP on SDM845 and SC8280XP platforms - HPD fixes - Support for limiting DP link rate via DT property, this enables support for HBR3 rates. DSI: - Validate display modes according to the DSI OPP table - DSI PHY support for the SM6375 platform - Fixed byte intf clock selection for 14nm PHYs MDP5: - Schema conversion to YAML Misc fixes as usual Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-18drm/msm/dp: Remove INIT_SETUP delayBjorn Andersson
During initalization of the DisplayPort controller an EV_HPD_INIT_SETUP event is generated, but with a delay of 100 units. This delay existed to circumvent bug in the QMP combo PHY driver, where if the DP part was powered up before USB, the common properties would not be properly initialized - and USB wouldn't work. This issue was resolved in the recent refactoring of the QMP driver, so it's now possible to remove this delay. While there is still a timing dependency in the current implementation, test indicates that it's now possible to boot with an external display on USB Type-C and have the display power up, without disconnecting and reconnecting the cable. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/518729/ Link: https://lore.kernel.org/r/20230117172951.2748456-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: add support of max dp link rateKuogee Hsieh
By default, HBR2 (5.4G) is the max link rate be supported. This patch uses the actual limit specified by DT and removes the artificial limitation to 5.4 Gbps. Supporting HBR3 is a consequence of that. Changes in v2: -- add max link rate from dtsi Changes in v3: -- parser max_data_lanes and max_dp_link_rate from dp_out endpoint Changes in v4: -- delete unnecessary pr_err Changes in v5: -- split parser function into different patch Changes in v9: -- revised commit test Changes in v13: -- repalced "properity" with "property" Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516097/ Link: https://lore.kernel.org/r/1672163103-31254-6-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: Add capability to parser and retrieve max DP link supported rate ↵Kuogee Hsieh
from link-frequencies property of dp_out endpoint Changes in v6: -- second patch after split parser patch into two patches Changes in v7: -- without checking cnt against DP_MAX_NUM_DP_LANES to retrieve link rate Changes in v9: -- separate parser link-frequencies out of data-lanes Changes in v10: -- add dp_parser_link_frequencies() Changes in v11: -- return 0 if(!endpoint) Changes in v12: -- replace khz with kbytes at dp_parser.h Changes in v14: -- replace "parser" with "parse" at commit subject -- use do_div() for 64 bits division Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516100/ Link: https://lore.kernel.org/r/1672163103-31254-5-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: parse data-lanes as property of dp_out endpointKuogee Hsieh
Add capability to parser data-lanes as property of dp_out endpoint. Also retain the original capability to parser data-lanes as property of mdss_dp node to handle legacy case. Changes in v6: -- first patch after split parser patch into two Changes in v7: -- check "data-lanes" from endpoint first Changes in v14: -- replace "parser" with "parse" at commit subject -- add matching brackets at dp_parser_misc() Changes in v15: -- concise dp_parser_misc() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516096/ Link: https://lore.kernel.org/r/1672163103-31254-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: Implement hpd_notify()Bjorn Andersson
The DisplayPort controller's hot-plug mechanism is based on pinmuxing a physical signal on a GPIO pin into the controller. This is not always possible, either because there aren't dedicated GPIOs available or because the hot-plug signal is a virtual notification, in cases such as USB Type-C. For these cases, by implementing the hpd_notify() callback for the DisplayPort controller's drm_bridge, a downstream drm_bridge (next_bridge) can be used to track and signal the connection status changes. This makes it possible to use downstream drm_bridges such as display-connector or any virtual mechanism, as long as they are implemented as a drm_bridge. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [bjorn: Drop connector->fwnode assignment and dev from struct msm_dp] Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514410/ Link: https://lore.kernel.org/r/20221207220012.16529-10-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: Rely on hpd_enable/disable callbacksBjorn Andersson
The DisplayPort controller's internal HPD interrupt handling is used for cases where the HPD signal is connected to a GPIO which is pinmuxed into the DisplayPort controller. In other configurations the HPD notification might be delivered by the DRM framework from an associated bridge. This difference is not appropriately represented by the "is_edp" boolean, but is properly represented by the frameworks invocation of the hpd_enable() and hpd_disable() callbacks. Switch the current condition to rely on these callbacks instead. This ensures appropriate handling of the three cases; no bridge connected, a bridge without DRM_BRIDGE_OP_HPD and a bridge with DRM_BRIDGE_OP_HPD. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514414/ Link: https://lore.kernel.org/r/20221207220012.16529-9-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: Add SDM845 DisplayPort instanceBjorn Andersson
The Qualcomm SDM845 platform has a single DisplayPort controller, with the same design as SC7180, so add support for this by reusing the SC7180 definition. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514395/ Link: https://lore.kernel.org/r/20221207220012.16529-8-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-09drm/msm/dp: Add DP and EDP compatibles for SC8280XPBjorn Andersson
The SC8280XP platform has four DisplayPort controllers, per MDSS instance, all with widebus support. The first two are defined to be DisplayPort only, while the latter pair (of each instance) can be either DisplayPort or Embedded DisplayPort. The two sets are tied to the possible compatibels. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514394/ Link: https://lore.kernel.org/r/20221207220012.16529-7-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-08drm/msm/dp: Stop using DP id as index in descBjorn Andersson
In the SC8280XP platform there are two identical MDSS instances, each with the same set of DisplayPort instances, at different addresses. By not relying on the index to define the instance id it's possible to describe them both in the same table and hence have a single compatible. While at it, flatten the cfg/desc structure so that the match data is just an array of descs. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514397/ Link: https://lore.kernel.org/r/20221207220012.16529-6-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-03drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transferKuogee Hsieh
There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516121/ Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-11-30Merge tag 'drm-msm-display-for-6.2' of ↵Dave Airlie
https://gitlab.freedesktop.org/lumag/msm into drm-next drm/msm updates for 6.2 Core: - MSM_INFO_GET_FLAGS support - Cleaned up MSM IOMMU wrapper code DPU: - Added support for XR30 and P010 image formats - Reworked MDSS/DPU schema, added SM8250 MDSS bindings - Added Qualcomm SM6115 support DP: - Dropped unsane sanity checks DSI: - Fix calculation of DSC pps payload DSI PHY: - DSI PHY support for QCM2290 HDMI: - Reworked dev init path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221126102141.721353-1-dmitry.baryshkov@linaro.org
2022-11-24Backmerge tag 'v6.1-rc6' into drm-nextDave Airlie
Linux 6.1-rc6 This is needed for drm-misc-next and tegra. Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-12drm/msm: Use drm_mode_copy()Ville Syrjälä
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-5-ville.syrjala@linux.intel.com
2022-11-04drm/msm/dp: drop modeset sanity checksJohan Hovold
Drop the overly defensive modeset sanity checks of function parameters which have already been checked or used by the callers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502674/ Link: https://lore.kernel.org/r/20220913085320.8577-10-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: retry 3 times if set sink to D0 poweer state failedKuogee Hsieh
Bring sink out of D3 (power down) mode into D0 (normal operation) mode by setting DP_SET_POWER_D0 bit to DP_SET_POWER dpcd register. This patch will retry 3 times if written to DP_SET_POWER register failed. Changes in v5: -- split into two patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502536/ Link: https://lore.kernel.org/r/1662999830-13916-4-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-02drm/msm/dp: replace variable err with len at dp_aux_link_power_up()Kuogee Hsieh
drm_dp_dpcd_readb() will return 1 to indicate one byte had been read successfully. This patch replace variable "err" with "len" have more correct meaning. changes in v5: -- split into 3 patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502533/ Link: https://lore.kernel.org/r/1662999830-13916-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-30drm/msm/dp: cleared DP_DOWNSPREAD_CTRL register before start link trainingKuogee Hsieh
DOWNSPREAD_CTRL (0x107) shall be cleared to 0 upon power-on reset or an upstream device disconnect. This patch will enforce this rule by always cleared DOWNSPREAD_CTRL register to 0 before start link training. At rare case that DP MSA timing parameters may be mis-interpreted by the sink which causes audio sampling rate be calculated wrongly and cause audio did not work at sink if DOWNSPREAD_CTRL register is not cleared to 0. Changes in v2: 1) fix spelling at commit text 2) merge ssc variable into encoding[0] Changes in v3: -- correct spelling of DOWNSPREAD_CTRL -- replace err with len of ssize_t Changes in v4: -- split into 2 patches Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Patchwork: https://patchwork.freedesktop.org/patch/502532/ Link: https://lore.kernel.org/r/1662999830-13916-2-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-30drm/msm/dp: fix bridge lifetimeJohan Hovold
Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP bridges, previously allocated bridges will leak on probe deferral. Fix this by amending the DP parser interface and tying the lifetime of the bridge device to the DRM device rather than DP platform device. Fixes: c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus") Cc: stable@vger.kernel.org # 5.19 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502667/ Link: https://lore.kernel.org/r/20220913085320.8577-8-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-30drm/msm/dp: fix aux-bus EP lifetimeJohan Hovold
Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP aux-bus, an attempt to populate the bus a second time will simply fail ("DP AUX EP device already populated"). Fix this by tying the lifetime of the EP device to the DRM device rather than DP controller platform device. Fixes: c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus") Cc: stable@vger.kernel.org # 5.19 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502672/ Link: https://lore.kernel.org/r/20220913085320.8577-7-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-30drm/msm/dp: fix IRQ lifetimeJohan Hovold
Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This is specifically true for the DP IRQ, which will otherwise remain requested so that the next bind attempt fails when requesting the IRQ a second time. Since commit c3bf8e21b38a ("drm/msm/dp: Add eDP support via aux_bus") this can happen when the aux-bus panel driver has not yet been loaded so that probe is deferred. Fix this by tying the device-managed lifetime of the DP IRQ to the DRM device so that it is released when bind fails. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Cc: stable@vger.kernel.org # 5.10 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502679/ Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:38:13 +0000