summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/disp/dpu1
AgeCommit message (Collapse)Author
2025-03-05drm/msm/dpu: enable CDM_0 for DPUs 5.x+Dmitry Baryshkov
Enable the CDM_0 block on DPU generations starting from 5.x as documented in the vendor dtsi file. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/638407/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-2-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: rename CDM block definitionDmitry Baryshkov
The CDM block is not limited to SC7280, but it is common to all platforms since DPU 5.x. Rename it from sc7280_cdm to dpu_cdm_5_x. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/638405/ Link: https://lore.kernel.org/r/20250220-dpu-add-cdm-v2-1-77f5f0df3d9a@linaro.org
2025-03-05drm/msm/dpu: Set possible clones for all encodersJessica Zhang
Set writeback encoders as possible clones for DSI encoders and vice versa. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637498/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-14-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Reorder encoder kickoff for CWBJessica Zhang
Add a helper that will handle the correct order of the encoder kickoffs for concurrent writeback. For concurrent writeback, the realtime encoder must always kickoff last as it will call the trigger flush and start. This avoids the following scenario where the writeback encoder increments the pending kickoff count after the WB_DONE interrupt is fired: If the realtime encoder is kicked off first, the encoder kickoff will flush/start the encoder and increment the pending kickoff count. The WB_DONE interrupt then fires (before the writeback encoder is kicked off). When the writeback encoder enters its kickoff, it will skip the flush/start (due to CWB being enabled) and hit a frame done timeout as the frame was kicked off (and the WB_DONE interrupt fired) without the pending kickoff count being incremented. In addition, the writeback timer should only start after the realtime encoder is kicked off to ensure that we don't get timeouts when the system has a heavy load (ex. when debug logs are enabled) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637491/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-13-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Skip trigger flush and start for CWBJessica Zhang
For concurrent writeback, the real time encoder is responsible for trigger flush and trigger start. Return early for trigger start and trigger flush for the concurrent writeback encoders. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637505/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-12-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Start frame done timer after encoder kickoffJessica Zhang
Starting the frame done timer before the encoder is finished kicking off can lead to unnecessary frame done timeouts when the device is experiencing heavy load (ex. when debug logs are enabled). Thus, create a separate API for starting the encoder frame done timer and call it after the encoder kickoff is finished Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637502/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-11-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Adjust writeback phys encoder setup for CWBJessica Zhang
Adjust QoS remapper, OT limit, and CDP parameters to account for concurrent writeback Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637490/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-10-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Support CWB in dpu_hw_ctlJessica Zhang
The CWB mux has a pending flush bit and *_active register. Add support for configuring them within the dpu_hw_ctl layer. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637492/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-9-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Configure CWB in writeback encoderJessica Zhang
Cache the CWB block mask in the DPU virtual encoder and configure CWB according to the CWB block mask within the writeback phys encoder Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637501/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-8-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Reserve resources for CWBJessica Zhang
Add support for RM to reserve dedicated CWB PINGPONGs and CWB muxes For concurrent writeback, even-indexed CWB muxes must be assigned to even-indexed LMs and odd-indexed CWB muxes for odd-indexed LMs. The same even/odd rule applies for dedicated CWB PINGPONGs. Track the CWB muxes in the global state and add a CWB-specific helper to reserve the correct CWB muxes and dedicated PINGPONGs following the even/odd rule. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637495/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-7-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Fail atomic_check if multiple outputs request CDM blockJessica Zhang
Currently, our hardware only supports a single output using CDM block at most. Because of this, we cannot support cases where both writeback and DP output request CDM simultaneously To avoid this happening when CWB is enabled, change msm_display_topoloy.needs_cdm into a num_cdm counter to track how many outputs are requesting CDM block. Return EINVAL if multiple outputs are trying to reserve CDM. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/637499/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-6-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Require modeset if clone mode status changesJessica Zhang
If the clone mode enabled status is changing, a modeset needs to happen so that the resources can be reassigned Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637483/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-5-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: Add CWB to msm_display_topologyJessica Zhang
Currently, the topology is calculated based on the assumption that the user cannot request real-time and writeback simultaneously. For example, the number of LMs and CTLs are currently based off the number of phys encoders under the assumption there will be at least 1 LM/CTL per phys encoder. This will not hold true for concurrent writeback as both phys encoders (1 real-time and 1 writeback) must be driven by 1 LM/CTL when concurrent writeback is enabled. To account for this, add a cwb_enabled flag and only adjust the number of CTL/LMs needed by a given topology based on the number of phys encoders only if CWB is not enabled. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637486/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-4-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocationDmitry Baryshkov
Up to now the driver has been using encoder to allocate hardware resources. Switch it to use CRTC id in preparation for the next step. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637503/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-3-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: move resource allocation to CRTCDmitry Baryshkov
All resource allocation is centered around the LMs. Then other blocks (except DSCs) are allocated basing on the LMs that was selected, and LM powers up the CRTC rather than the encoder. Moreover if at some point the driver supports encoder cloning, allocating resources from the encoder will be incorrect, as all clones will have different encoder IDs, while LMs are to be shared by these encoders. In addition, move mode_changed() to dpu_crtc as encoder no longer has access to topology information Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [quic_abhinavk@quicinc.com: Refactored resource allocation for CDM] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [quic_jesszhan@quicinc.com: Changed to grabbing exising global state] Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> [DB: rebased on top of msm-next] [DB: fixed resource allcoation to ignore the active_changed flag] Patchwork: https://patchwork.freedesktop.org/patch/637487/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-2-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: fill CRTC resources in dpu_crtc.cDmitry Baryshkov
Stop poking into CRTC state from dpu_encoder.c, fill CRTC HW resources from dpu_crtc_assign_resources(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [quic_abhinavk@quicinc.com: cleaned up formatting] Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/637485/ Link: https://lore.kernel.org/r/20250214-concurrent-wb-v6-1-a44c293cf422@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-03-05drm/msm/dpu: don't set crtc_state->mode_changed from atomic_check()Dmitry Baryshkov
The MSM driver uses drm_atomic_helper_check() which mandates that none of the atomic_check() callbacks toggles crtc_state->mode_changed. Perform corresponding check before calling the drm_atomic_helper_check() function. Fixes: 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output") Reported-by: Simona Vetter <simona.vetter@ffwll.ch> Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/ Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [DB: dropped the WARN_ON] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633400/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-4-bbfd3a6cd1a4@linaro.org
2025-02-26drm/msm/dpu: Remove arbitrary limit of 1 interface in DSC topologyMarijn Suijten
When DSC is enabled the number of interfaces is forced to be 1, and documented that it is a "power-optimal" layout to use two DSC encoders together with two Layer Mixers. However, the same layout (two DSC hard-slice encoders with two LMs) is also used when the display is fed with data over two instead of one interface (common on 4k@120Hz smartphone panels with Dual-DSI). Solve this by simply removing the num_intf = 1 assignment as the count is already calculated by computing the number of physical encoders within the virtual encoder. Fixes: 7e9cc175b159 ("drm/msm/disp/dpu1: Add support for DSC in topology") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/637649/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-3-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/msm/dpu: simplify dpu_encoder_get_topology() interfaceDmitry Baryshkov
As a preparation for calling dpu_encoder_get_topology() from different code paths, simplify its calling interface, obtaining some data pointers internally instead passing them via arguments. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633396/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-3-bbfd3a6cd1a4@linaro.org
2025-02-25drm/msm/dpu: move needs_cdm setting to dpu_encoder_get_topology()Dmitry Baryshkov
As a preparation for calling dpu_encoder_get_topology() from different places, move the code setting topology->needs_cdm to that function (instead of patching topology separately). Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633395/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-2-bbfd3a6cd1a4@linaro.org
2025-02-25drm/msm/dpu: don't use active in atomic_check()Dmitry Baryshkov
The driver isn't supposed to consult crtc_state->active/active_check for resource allocation. Instead all resources should be allocated if crtc_state->enabled is set. Stop consulting active / active_changed in order to determine whether the hardware resources should be (re)allocated. Fixes: ccc862b957c6 ("drm/msm/dpu: Fix reservation failures in modeset") Reported-by: Simona Vetter <simona.vetter@ffwll.ch> Closes: https://lore.kernel.org/dri-devel/ZtW_S0j5AEr4g0QW@phenom.ffwll.local/ Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/633393/ Link: https://lore.kernel.org/r/20250123-drm-dirty-modeset-v2-1-bbfd3a6cd1a4@linaro.org
2025-02-25drm/msm/dpu: Fall back to a single DSC encoder (1:1:1) on small SoCsMarijn Suijten
Some SoCs such as SC7280 (used in the Fairphone 5) have only a single DSC "hard slice" encoder. The current hardcoded use of 2:2:1 topology (2 LM and 2 DSC for a single interface) make it impossible to use Display Stream Compression panels with mainline, which is exactly what's installed on the Fairphone 5. By loosening the hardcoded `num_dsc = 2` to fall back to `num_dsc = 1` when the catalog only contains one entry, we can trivially support this phone and unblock further panel enablement on mainline. A few more supporting changes in this patch ensure hardcoded constants of 2 DSC encoders are replaced to count or read back the actual number of DSC hardware blocks that are enabled for the given virtual encoder. Likewise DSC_MODE_SPLIT_PANEL can no longer be unconditionally enabled. Cc: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Danila Tikhonov <danila@jiaxyga.com> Patchwork: https://patchwork.freedesktop.org/patch/633318/ Link: https://lore.kernel.org/r/20250122-dpu-111-topology-v2-1-505e95964af9@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/msm: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632406/ Link: https://lore.kernel.org/r/20250114191724.861601-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/msm/dpu: Simplify using local 'ctl' variableKrzysztof Kozlowski
In few places we store 'phys_enc->hw_ctl' to local 'ctl' variable so use it everywhere. No functional change. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632389/ Link: https://lore.kernel.org/r/20250114155959.583889-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-25drm/msm/dpu: Add writeback support for SM6150Fange Zhang
On the SM6150 platform there is WB_2 block. Add it to the SM6150 catalog. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Fange Zhang <quic_fangez@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/632337/ Link: https://lore.kernel.org/r/20250114-add-writeback-support-for-sm6150-v2-1-d707b31aad5c@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-02-21Merge tag 'drm-msm-fixes-2025-02-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.14-rc4 Display: * More catalog fixes: - to skip watchdog programming through top block if its not present - fix the setting of WB mask to ensure the WB input control is programmed correctly through ping-pong - drop lm_pair for sm6150 as that chipset does not have any 3dmerge block * Fix the mode validation logic for DP/eDP to account for widebus (2ppc) to allow high clock resolutions * Fix to disable dither during encoder disable as otherwise this was causing kms_writeback failure due to resource sharing between * WB and DSI paths as DSI uses dither but WB does not * Fixes for virtual planes, namely to drop extraneous return and fix uninitialized variables * Fix to avoid spill-over of DSC encoder block bits when programming the bits-per-component * Fixes in the DSI PHY to protect against concurrent access of PHY_CMN_CLK_CFG regs between clock and display drivers Core/GPU: * Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout * Only print GMU fw version once, instead of each time the GPU resumes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
2025-02-15drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()Jessica Zhang
Drop extra return at the end of dpu_crtc_reassign_planes() Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/631565/ Link: https://lore.kernel.org/r/20250108-virtual-planes-fixes-v1-2-420cb36df94a@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fieldsMarijn Suijten
What used to be the input_10_bits boolean - feeding into the lowest bit of DSC_ENC - on MSM downstream turned into an accidental OR with the full bits_per_component number when it was ported to the upstream kernel. On typical bpc=8 setups we don't notice this because line_buf_depth is always an odd value (it contains bpc+1) and will also set the 4th bit after left-shifting by 3 (hence this |= bits_per_component is a no-op). Now that guards are being removed to allow more bits_per_component values besides 8 (possible since commit 49fd30a7153b ("drm/msm/dsi: use DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with the 5th bit which is convert_rgb. This is "fortunately" also always set to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12 starts being used it'll write into simple_422 which is normally false. To solve all these overlaps, simply replicate downstream code and only set this lowest bit if bits_per_component is equal to 10. It is unclear why DSC requires this only for bpc=10 but not bpc=12, and also notice that this lowest bit wasn't set previously despite having a panel and patch on the list using it without any mentioned issues. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/636311/ Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Disable dither in phys encoder cleanupJessica Zhang
Disable pingpong dither in dpu_encoder_helper_phys_cleanup(). This avoids the issue where an encoder unknowingly uses dither after reserving a pingpong block that was previously bound to an encoder that had enabled dither. Cc: stable@vger.kernel.org Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Closes: https://lore.kernel.org/all/jr7zbj5w7iq4apg3gofuvcwf4r2swzqjk7sshwcdjll4mn6ctt@l2n3qfpujg3q/ Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: 3c128638a07d ("drm/msm/dpu: add support for dither block in display") Patchwork: https://patchwork.freedesktop.org/patch/636517/ Link: https://lore.kernel.org/r/20250211-dither-disable-v1-1-ac2cb455f6b9@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: Fix uninitialized variableEthan Carter Edwards
There is a possibility for an uninitialized *ret* variable to be returned in some code paths. Fix this by initializing *ret* to 0. Addresses-Coverity-ID: 1642546 ("Uninitialized scalar variable") Fixes: 774bcfb73176 ("drm/msm/dpu: add support for virtual planes") Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/636201/ Link: https://lore.kernel.org/r/20250209-dpu-v2-1-114dfd4ebefd@ethancedwards.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: correct LM pairing for SM6150Dmitry Baryshkov
The SM6150 platform doesn't have 3DMux (MERGE_3D) block, so it can not split the screen between two LMs. Drop lm_pair fields as they don't make sense for this platform. Suggested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Fixes: cb2f9144693b ("drm/msm/dpu: Add SM6150 support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629377/ Link: https://lore.kernel.org/r/20241217-dpu-fix-sm6150-v2-1-9acc8f5addf3@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: enable DPU_WB_INPUT_CTRL for DPU 5.xDmitry Baryshkov
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL, to bind WB and PINGPONG blocks, but they do not. Change those platforms to use WB_SM8250_MASK, which includes that bit. Fixes: 1f5bcc4316b3 ("drm/msm/dpu: enable writeback on SC8108X") Fixes: ab2b03d73a66 ("drm/msm/dpu: enable writeback on SM6125") Fixes: 47cebb740a83 ("drm/msm/dpu: enable writeback on SM8150") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628876/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-2-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-02-15drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450Dmitry Baryshkov
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit set, which means that those platforms have dropped some of the registers, including the WD TIMER-related ones. Stop providing the callback to program WD timer on those platforms. Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/628874/ Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-1-988f0662cb7e@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2025-01-13Merge tag 'drm-msm-next-2025-01-07' of gitlab.freedesktop.org:drm/msm into ↵Dave Airlie
drm-next Updates for v6.14 MDSS: - properly described UBWC registers - added SM6150 (aka QCS615) support MDP4: - several small fixes DPU: - added SM6150 (aka QCS615) support - enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane) - fixed modes filtering for platforms w/o 3DMux - fixed DSPP DSPP_2 / _3 links on several platforms - corrected DSPP definitions on SDM670 - added CWB hardware blocks support - added VBIF to DPU snapshots - dropped struct dpu_rm_requirements DP: - reworked DP audio support DSI: - added SM6150 (aka QCS615) support GPU: - Print GMU core fw version - GMU bandwidth voting for a740 and a750 - Expose uche trap base via uapi - UAPI error reporting Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
2024-12-24drm/msm/dpu: Add RM support for allocating CWBJessica Zhang
Add support for allocating the concurrent writeback mux as part of the WB allocation Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629238/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-14-fe220297a7f0@quicinc.com
2024-12-24drm/msm/dpu: add CWB support to dpu_hw_wbEsha Bharadwaj
Adjust the WB_MUX configuration to account for using dedicated CWB pingpong blocks. Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629248/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-13-fe220297a7f0@quicinc.com
2024-12-24drm/msm/dpu: Add dpu_hw_cwb abstraction for CWB blockJessica Zhang
The CWB mux has its own registers and set of operations. Add dpu_hw_cwb abstraction to allow driver to configure the CWB mux. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629254/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-12-fe220297a7f0@quicinc.com [DB: added #include <linux/bitfield.h>] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-24drm/msm/dpu: add devcoredumps for cwb registersEsha Bharadwaj
Implement instance of snapshot function to dump new registers used for cwb Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629221/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-11-fe220297a7f0@quicinc.com
2024-12-24drm/msm/dpu: Specify dedicated CWB pingpong blocksJessica Zhang
Change pingpong index and names to distinguish between general use pingpong blocks and pingpong blocks dedicated for concurrent writeback Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629229/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-10-fe220297a7f0@quicinc.com
2024-12-24drm/msm/dpu: Add CWB entry to catalog for SM8650Esha Bharadwaj
Add a new block for concurrent writeback mux to the SM8650 HW catalog Signed-off-by: Esha Bharadwaj <quic_ebharadw@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629219/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-9-fe220297a7f0@quicinc.com
2024-12-24drm/msm/dpu: get rid of struct dpu_rm_requirementsDmitry Baryshkov
The struct dpu_rm_requirements was used to wrap display topology and hw resources, which meant INTF indices. As of commit ef58e0ad3436 ("drm/msm/dpu: get INTF blocks directly rather than through RM") the hw resources struct was removed, leaving struct dpu_rm_requirements containing a single field (topology). Remove the useless wrapper. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> [DB: dropped stray msm_drv.h inclusion] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629259/ Link: https://lore.kernel.org/r/20241216-concurrent-wb-v4-5-fe220297a7f0@quicinc.com
2024-12-24drm/msm: fix -Wformat-security warningsArnd Bergmann
Passing a variable string as a printf style format is potentially dangerous that -Wformat-security can warn about if enabled. A new instance just got added: drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c: In function 'dpu_kms_mdp_snapshot': drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1046:49: error: format not a string literal and no format arguments [-Werror=format-security] 1046 | vbif->name); | ~~~~^~~~~~ Fix this one and the preexisting -Wformat-security warnings the in the DRM code for snapdragon. Fixes: 1a40bb31fcf1 ("drm/msm/dpu: Add VBIF to DPU snapshot") # and others Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/629126/ Link: https://lore.kernel.org/r/20241216083319.1838449-1-arnd@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on X1E80100Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629966/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-8-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SM8650Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: b94747f7d8c7 ("drm/msm/dpu: add support for SM8650 DPU") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629962/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-7-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SM8550Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629961/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-6-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SM8350Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629959/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-5-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SM8250Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 05ae91d960fd ("drm/msm/dpu: enable DSPP support on SM8[12]50") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629956/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-4-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SC8180XDmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: f5abecfe339e ("drm/msm/dpu: enable DSPP and DSC on sc8180x") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629954/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-3-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: link DSPP_2/_3 blocks on SM8150Dmitry Baryshkov
Link DSPP_2 to the LM_2 and DSPP_3 to the LM_3 mixer blocks. This allows using colour transformation matrix (aka night mode) with more outputs at the same time. Fixes: 05ae91d960fd ("drm/msm/dpu: enable DSPP support on SM8[12]50") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629952/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-2-38fa961ea992@linaro.org
2024-12-24drm/msm/dpu: provide DSPP and correct LM config for SDM670Dmitry Baryshkov
On SDM670 the DPU has two DSPP blocks compared to 4 DSPP blocks on SDM845. Currently SDM670 just reuses LMs and DSPPs from SDM845. Define platform-specific configuration for those blocks. Fixes: e140b7e496b7 ("drm/msm/dpu: Add hw revision 4.1 (SDM670)") Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/629951/ Link: https://lore.kernel.org/r/20241220-dpu-fix-catalog-v2-1-38fa961ea992@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:27:50 +0000