summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2025-02-27drm/i915/dp: Fix error handling during 128b/132b link trainingImre Deak
commit b9275eabe31e6679ae12c46a4a0a18d622db4570 upstream. At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@vger.kernel.org # v5.18+ Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-27drm/i915: Make sure all planes in use by the joiner have their crtc includedVille Syrjälä
commit 07fb70d82e0df085980246bf17bc12537588795f upstream. Any active plane needs to have its crtc included in the atomic state. For planes enabled via uapi that is all handler in the core. But when we use a plane for joiner the uapi code things the plane is disabled and therefore doesn't have a crtc. So we need to pull those in by hand. We do it first thing in intel_joiner_add_affected_crtcs() so that any newly added crtc will subsequently pull in all of its joined crtcs as well. The symptoms from failing to do this are: - duct tape in the form of commit 1d5b09f8daf8 ("drm/i915: Fix NULL ptr deref by checking new_crtc_state") - the plane's hw state will get overwritten by the disabled uapi state if it can't find the uapi counterpart plane in the atomic state from where it should copy the correct state Cc: stable@vger.kernel.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-2-ville.syrjala@linux.intel.com (cherry picked from commit 91077d1deb5374eb8be00fb391710f00e751dc4b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21drm/i915/selftests: avoid using uninitialized contextKrzysztof Karas
[ Upstream commit 53139b3f9998ea07289e7b70b909fea2264a0de9 ] There is an error path in igt_ppgtt_alloc(), which leads to ww object being passed down to i915_gem_ww_ctx_fini() without initialization. Correct that by only putting ppgtt->vm and returning early. Fixes: 480ae79537b2 ("drm/i915/selftests: Prepare gtt tests for obj->mm.lock removal") Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/iuaonpjc3rywmvhna6umjlvzilocn2uqsrxfxfob24e2taocbi@lkaivvfp4777 (cherry picked from commit 8d8334632ea62424233ac6529712868241d0f8df) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-17drm/i915: Drop 64bpp YUV formats from ICL+ SDR planesVille Syrjälä
commit c7b49506b3ba7a62335e6f666a43f67d5cd9fd1e upstream. I'm seeing underruns with these 64bpp YUV formats on TGL. The weird details: - only happens on pipe B/C/D SDR planes, pipe A SDR planes seem fine, as do all HDR planes - somehow CDCLK related, higher CDCLK allows for bigger plane with these formats without underruns. With 300MHz CDCLK I can only go up to 1200 pixels wide or so, with 650MHz even a 3840 pixel wide plane was OK - ICL and ADL so far appear unaffected So not really sure what's the deal with this, but bspec does state "64-bit formats supported only on the HDR planes" so let's just drop these formats from the SDR planes. We already disallow 64bpp RGB formats. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (cherry picked from commit 35e1aacfe536d6e8d8d440cd7155366da2541ad4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17drm/i915: Fix page cleanup on DMA remap failureBrian Geffon
commit fa6182c8b13ebfdc70ebdc09161a70dd8131f3b1 upstream. When converting to folios the cleanup path of shmem_get_pages() was missed. When a DMA remap fails and the max segment size is greater than PAGE_SIZE it will attempt to retry the remap with a PAGE_SIZEd segment size. The cleanup code isn't properly using the folio apis and as a result isn't handling compound pages correctly. v2 -> v3: (Ville) Just use shmem_sg_free_table() as-is in the failure path of shmem_get_pages(). shmem_sg_free_table() will clear mapping unevictable but it will be reset when it retries in shmem_sg_alloc_table(). v1 -> v2: (Ville) Fixed locations where we were not clearing mapping unevictable. Cc: stable@vger.kernel.org Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13487 Link: https://lore.kernel.org/lkml/20250116135636.410164-1-bgeffon@google.com/ Fixes: 0b62af28f249 ("i915: convert shmem_sg_free_table() to use a folio_batch") Signed-off-by: Brian Geffon <bgeffon@google.com> Suggested-by: Tomasz Figa <tfiga@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250127204332.336665-1-bgeffon@google.com Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Tested-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit 9e304a18630875352636ad52a3d2af47c3bde824) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17drm/i915/guc: Debug print LRC state entries only if the context is pinnedDaniele Ceraolo Spurio
commit 57965269896313e1629a518d3971ad55f599b792 upstream. After the context is unpinned the backing memory can also be unpinned, so any accesses via the lrc_reg_state pointer can end up in unmapped memory. To avoid that, make sure to only access that memory if the context is pinned when printing its info. v2: fix newline alignment Fixes: 28ff6520a34d ("drm/i915/guc: Update GuC debugfs to support new GuC") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250115001334.3875347-1-daniele.ceraolospurio@intel.com (cherry picked from commit 5bea40687c5cf2a33bf04e9110eb2e2b80222ef5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-23drm/i915/fb: Relax clear color alignment to 64 bytesVille Syrjälä
commit 1a5401ec3018c101c456cdbda2eaef9482db6786 upstream. Mesa changed its clear color alignment from 4k to 64 bytes without informing the kernel side about the change. This is now likely to cause framebuffer creation to fail. The only thing we do with the clear color buffer in i915 is: 1. map a single page 2. read out bytes 16-23 from said page 3. unmap the page So the only requirement we really have is that those 8 bytes are all contained within one page. Thus we can deal with the Mesa regression by reducing the alignment requiment from 4k to the same 64 bytes in the kernel. We could even go as low as 32 bytes, but IIRC 64 bytes is the hardware requirement on the 3D engine side so matching that seems sensible. Note that the Mesa alignment chages were partially undone so the regression itself was already fixed on userspace side. Cc: stable@vger.kernel.org Cc: Sagar Ghuge <sagar.ghuge@intel.com> Cc: Nanley Chery <nanley.g.chery@intel.com> Reported-by: Xi Ruoyao <xry111@xry111.site> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13057 Closes: https://lore.kernel.org/all/45a5bba8de009347262d86a4acb27169d9ae0d9f.camel@xry111.site/ Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/17f97a69c13832a6c1b0b3aad45b06f07d4b852f Link: https://gitlab.freedesktop.org/mesa/mesa/-/commit/888f63cf1baf34bc95e847a30a041dc7798edddb Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129065014.8363-2-ville.syrjala@linux.intel.com Tested-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit ed3a892e5e3d6b3f6eeb76db7c92a968aeb52f3d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09drm/i915/dg1: Fix power gate sequence.Rodrigo Vivi
[ Upstream commit 20e7c5313ffbf11c34a46395345677adbe890bee ] sub-pipe PG is not present on DG1. Setting these bits can disable other power gates and cause GPU hangs on video playbacks. VLK: 16314, 4304 Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381 Fixes: 85a12d7eb8fe ("drm/i915/tgl: Fix Media power gate sequence.") Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit de7061947b4ed4be857d452c60d5fb795831d79e) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27i915/guc: Accumulate active runtime on gt resetUmesh Nerlige Ramappa
[ Upstream commit 1622ed27d26ab4c234476be746aa55bcd39159dd ] On gt reset, if a context is running, then accumulate it's active time into the busyness counter since there will be no chance for the context to switch out and update it's run time. v2: Move comment right above the if (John) Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-4-umesh.nerlige.ramappa@intel.com (cherry picked from commit 7ed047da59cfa1acb558b95169d347acc8d85da1) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27i915/guc: Ensure busyness counter increases motonicallyUmesh Nerlige Ramappa
[ Upstream commit 59a0b46788d58fdcee8d2f6b4e619d264a1799bf ] Active busyness of an engine is calculated using gt timestamp and the context switch in time. While capturing the gt timestamp, it's possible that the context switches out. This race could result in an active busyness value that is greater than the actual context runtime value by a small amount. This leads to a negative delta and throws off busyness calculations for the user. If a subsequent count is smaller than the previous one, just return the previous one, since we expect the busyness to catch up. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-3-umesh.nerlige.ramappa@intel.com (cherry picked from commit cf907f6d294217985e9dafd9985dce874e04ca37) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27i915/guc: Reset engine utilization buffer before registrationUmesh Nerlige Ramappa
[ Upstream commit abcc2ddae5f82aa6cfca162e3db643dd33f0a2e8 ] On GT reset, we store total busyness counts for all engines and re-register the utilization buffer with GuC. At that time we should reset the buffer, so that we don't get spurious busyness counts on subsequent queries. To repro this issue, run igt@perf_pmu@busy-hang followed by igt@perf_pmu@most-busy-idle-check-all for a couple iterations. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127174006.190128-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit abd318237fa6556c1e5225529af145ef15d5ff0d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-19drm/i915: Fix NULL pointer dereference in capture_engineEugene Kobyak
commit da0b986256ae9a78b0215214ff44f271bfe237c1 upstream. When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19drm/i915: Fix memory leak by correcting cache object name in error handlerJiasheng Jiang
commit 2828e5808bcd5aae7fdcd169cac1efa2701fa2dd upstream. Replace "slab_priorities" with "slab_dependencies" in the error handler to avoid memory leak. Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@outlook.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127201042.29620-1-jiashengjiangcool@gmail.com (cherry picked from commit 9bc5e7dc694d3112bbf0fa4c46ef0fa0f114937a) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17drm/i915/hdcp: fix connector refcountingJani Nikula
commit 4cc2718f621a6a57a02581125bb6d914ce74d23b upstream. We acquire a connector reference before scheduling an HDCP prop work, and expect the work function to release the reference. However, if the work was already queued, it won't be queued multiple times, and the reference is not dropped. Release the reference immediately if the work was already queued. Fixes: a6597faa2d59 ("drm/i915: Protect workers against disappearing connectors") Cc: Sean Paul <seanpaul@chromium.org> Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # v5.10+ Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924153022.2255299-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit abc0742c79bdb3b164eacab24aea0916d2ec1cb5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-10drm/i915/gem: fix bitwise and logical AND mixupJani Nikula
commit 394b52462020b6cceff1f7f47fdebd03589574f3 upstream. CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND is an int, defaulting to 250. When the wakeref is non-zero, it's either -1 or a dynamically allocated pointer, depending on CONFIG_DRM_I915_DEBUG_RUNTIME_PM. It's likely that the code works by coincidence with the bitwise AND, but with CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y, there's the off chance that the condition evaluates to false, and intel_wakeref_auto() doesn't get called. Switch to the intended logical AND. v2: Use != to avoid clang -Wconstant-logical-operand (Nathan) Fixes: ad74457a6b5a ("drm/i915/dgfx: Release mmap on rpm suspend") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org # v6.1+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> # v1 Link: https://patchwork.freedesktop.org/patch/msgid/643cc0a4d12f47fd8403d42581e83b1e9c4543c7.1726680898.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 4c1bfe259ed1d2ade826f95d437e1c41b274df04) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-18drm/i915/guc: prevent a possible int overflow in wq offsetsNikita Zhandarovich
[ Upstream commit d3d37f74683e2f16f2635ee265884f7ca69350ae ] It may be possible for the sum of the values derived from i915_ggtt_offset() and __get_parent_scratch_offset()/ i915_ggtt_offset() to go over the u32 limit before being assigned to wq offsets of u64 type. Mitigate these issues by expanding one of the right operands to u64 to avoid any overflow issues just in case. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: c2aa552ff09d ("drm/i915/guc: Add multi-lrc context registration") Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patchwork.freedesktop.org/patch/msgid/20240725155925.14707-1-n.zhandarovich@fintech.ru Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 1f1c1bd56620b80ae407c5790743e17caad69cec) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/i915/fence: Mark debug_fence_free() with __maybe_unusedAndy Shevchenko
[ Upstream commit f99999536128b14b5d765a9982763b5134efdd79 ] When debug_fence_free() is unused (CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function] 118 | static inline void debug_fence_free(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~ Fix this by marking debug_fence_free() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8be4dce5ea6f2368cc25edc71989c4690fa66964) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unusedAndy Shevchenko
[ Upstream commit fcd9e8afd546f6ced378d078345a89bf346d065e ] When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function] 97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~~~~~~~~~ Fix this by marking debug_fence_init_onstack() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12drm/i915: Do not attempt to load the GSC multiple timesDaniele Ceraolo Spurio
commit 59d3cfdd7f9655a0400ac453bf92199204f8b2a1 upstream. If the GSC FW fails to load the GSC HW hangs permanently; the only ways to recover it are FLR or D3cold entry, with the former only being supported on driver unload and the latter only on DGFX, for which we don't need to load the GSC. Therefore, if GSC fails to load there is no need to try again because the HW is stuck in the error state and the submission to load the FW would just hang the GSCCS. Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS hangs to full GT resets, which would trigger a new attempt to load the GSC FW in the post-reset HW re-init; this issue is also fixed by not attempting to load the GSC FW after an error. Fixes: 15bd4a67e914 ("drm/i915/gsc: GSC firmware loading") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com (cherry picked from commit 03ded4d432a1fb7bb6c44c5856d14115f6f6c3b9) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14drm/i915/gem: Adjust vma offset for framebuffer mmap offsetAndi Shyti
commit 1ac5167b3a90c9820daa64cc65e319b2d958d686 upstream. When mapping a framebuffer object, the virtual memory area (VMA) offset ('vm_pgoff') should be adjusted by the start of the 'vma_node' associated with the object. This ensures that the VMA offset is correctly aligned with the corresponding offset within the GGTT aperture. Increment vm_pgoff by the start of the vma_node with the offset= provided by the user. Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ [Joonas: Add Cc: stable] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com (cherry picked from commit 60a2066c50058086510c91f404eb582029650970) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14drm/i915/gem: Fix Virtual Memory mapping boundaries calculationAndi Shyti
commit 8bdd9ef7e9b1b2a73e394712b72b22055e0e26c3 upstream. Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass") Reported-by: Jann Horn <jannh@google.com> Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com> [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-11drm/i915: Fix possible int overflow in skl_ddi_calculate_wrpll()Nikita Zhandarovich
commit 5b511572660190db1dc8ba412efd0be0d3781ab6 upstream. On the off chance that clock value ends up being too high (by means of skl_ddi_calculate_wrpll() having been called with big enough value of crtc_state->port_clock * 1000), one possible consequence may be that the result will not be able to fit into signed int. Fix this issue by moving conversion of clock parameter from kHz to Hz into the body of skl_ddi_calculate_wrpll(), as well as casting the same parameter to u64 type while calculating the value for AFE clock. This both mitigates the overflow problem and avoids possible erroneous integer promotion mishaps. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru (cherry picked from commit 833cf12846aa19adf9b76bc79c40747726f3c0c1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-11drm/i915/hdcp: Fix HDCP2_STREAM_STATUS macroSuraj Kandpal
[ Upstream commit 555069117390a5d581863bc797fb546bb4417c31 ] Fix HDCP2_STREAM_STATUS macro, it called pipe instead of port never threw a compile error as no one used it. --v2 -Add Fixes [Jani] Fixes: d631b984cc90 ("drm/i915/hdcp: Add HDCP 2.2 stream register") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240730035505.3759899-1-suraj.kandpal@intel.com (cherry picked from commit 73d7cd542bbd0a7c6881ea0df5255f190a1e7236) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-11i915/perf: Remove code to update PWR_CLK_STATE for gen12Umesh Nerlige Ramappa
[ Upstream commit 4bc14b9cfaa2149d41baef2f2620e9f82d9847d7 ] PWR_CLK_STATE only needs to be modified up until gen11. For gen12 this code is not applicable. Remove code to update context image with PWR_CLK_STATE for gen12. Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240629005643.3050678-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 7b5bdae7740eb6a3d09f9cd4e4b07362a15b86b3) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03drm/i915/dp: Don't switch the LTTPR mode on an active linkImre Deak
commit 509580fad7323b6a5da27e8365cd488f3b57210e upstream. Switching to transparent mode leads to a loss of link synchronization, so prevent doing this on an active link. This happened at least on an Intel N100 system / DELL UD22 dock, the LTTPR residing either on the host or the dock. To fix the issue, keep the current mode on an active link, adjusting the LTTPR count accordingly (resetting it to 0 in transparent mode). v2: Adjust code comment during link training about reiniting the LTTPRs. (Ville) Fixes: 7b2a4ab8b0ef ("drm/i915: Switch to LTTPR transparent mode link training") Reported-and-tested-by: Gareth Yu <gareth.yu@intel.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10902 Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-3-imre.deak@intel.com (cherry picked from commit 211ad49cf8ccfdc798a719b4d1e000d0a8a9e588) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03drm/i915/dp: Reset intel_dp->link_trained before retraining the linkImre Deak
commit d13e2a6e95e6b87f571c837c71a3d05691def9bb upstream. Regularly retraining a link during an atomic commit happens with the given pipe/link already disabled and hence intel_dp->link_trained being false. Ensure this also for retraining a DP SST link via direct calls to the link training functions (vs. an actual commit as for DP MST). So far nothing depended on this, however the next patch will depend on link_trained==false for changing the LTTPR mode to non-transparent. Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-2-imre.deak@intel.com (cherry picked from commit a4d5ce61765c08ab364aa4b327f6739b646e6cfa) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8Nitin Gote
commit 65564157ae64cec0f527583f96e32f484f730f92 upstream. We're seeing a GPU hang issue on a CHV platform, which was caused by commit bac24f59f454 ("drm/i915/execlists: Enable coarse preemption boundaries for Gen8"). The Gen8 platform only supports timeslicing and doesn't have a preemption mechanism, as its engines do not have a preemption timer. Commit 751f82b353a6 ("drm/i915/gt: Only disable preemption on Gen8 render engines") addressed this issue only for render engines. This patch extends that fix by ensuring that preemption is not considered for all engines on Gen8 platforms. v4: - Use the correct Fixes tag (Rodrigo Vivi) - Reworded commit log (Andi Shyti) v3: - Inside need_preempt(), condition of can_preempt() is not required as simplified can_preempt() is enough. (Chris Wilson) v2: Simplify can_preempt() function (Tvrtko Ursulin) Fixes: 751f82b353a6 ("drm/i915/gt: Only disable preemption on gen8 render engines") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11396 Suggested-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> CC: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711163208.1355736-1-nitin.r.gote@intel.com (cherry picked from commit 7df0be6e6280c6fca01d039864bb123e5e36604b) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05drm/i915/gt: Fix potential UAF by revoke of fence registersJanusz Krzysztofik
commit 996c3412a06578e9d779a16b9e79ace18125ab50 upstream. CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021 Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: stable@vger.kernel.org # v5.8+ Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27drm/i915/mso: using joiner is not possible with eDP MSOJani Nikula
commit 49cc17967be95d64606d5684416ee51eec35e84a upstream. It's not possible to use the joiner at the same time with eDP MSO. When a panel needs MSO, it's not optional, so MSO trumps joiner. v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville) Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training") Cc: <stable@vger.kernel.org> # v5.13+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915: Fix audio component initializationImre Deak
commit 75800e2e4203ea83bbc9d4f63ad97ea582244a08 upstream. After registering the audio component in i915_audio_component_init() the audio driver may call i915_audio_component_get_power() via the component ops. This could program AUD_FREQ_CNTRL with an uninitialized value if the latter function is called before display.audio.freq_cntrl gets initialized. The get_power() function also does a modeset which in the above case happens too early before the initialization step and triggers the "Reject display access from task" error message added by the Fixes: commit below. Fix the above issue by registering the audio component only after the initialization step. Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291 Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240521143022.3784539-1-imre.deak@intel.com (cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915/dpt: Make DPT object unshrinkableVidya Srinivas
commit 43e2b37e2ab660c3565d4cff27922bc70e79c3f1 upstream. In some scenarios, the DPT object gets shrunk but the actual framebuffer did not and thus its still there on the DPT's vm->bound_list. Then it tries to rewrite the PTEs via a stale CPU mapping. This causes panic. Cc: stable@vger.kernel.org Reported-by: Shawn Lee <shawn.c.lee@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> [vsyrjala: Add TODO comment] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240520165634.1162470-1-vidya.srinivas@intel.com (cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21drm/i915/gt: Disarm breadcrumbs if engines are already idleChris Wilson
commit 70cb9188ffc75e643debf292fcddff36c9dbd4ae upstream. The breadcrumbs use a GT wakeref for guarding the interrupt, but are disarmed during release of the engine wakeref. This leaves a hole where we may attach a breadcrumb just as the engine is parking (after it has parked its breadcrumbs), execute the irq worker with some signalers still attached, but never be woken again. That issue manifests itself in CI with IGT runner timeouts while tests are waiting indefinitely for release of all GT wakerefs. <6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats <7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT. ... <6> [299.356526] sysrq: Show State ... <6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002 <6> [299.373967] Call Trace: <6> [299.373968] <TASK> <6> [299.373970] __schedule+0x3bb/0xda0 <6> [299.373974] schedule+0x41/0x110 <6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915] <6> [299.374083] ? __pfx_var_wake_function+0x10/0x10 <6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915] <6> [299.374173] __i915_subtests+0xbe/0x240 [i915] <6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915] <6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915] <6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915] <6> [299.374547] __run_selftests+0xbb/0x190 [i915] <6> [299.374635] i915_live_selftests+0x4b/0x90 [i915] <6> [299.374717] i915_pci_probe+0x10d/0x210 [i915] At the end of the interrupt worker, if there are no more engines awake, disarm the breadcrumb and go to sleep. Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/i915/hwmon: Get rid of devmAshutosh Dixit
commit 5bc9de065b8bb9b8dd8799ecb4592d0403b54281 upstream. When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12drm/i915/gt: Fix CCS id's calculation for CCS mode settingAndi Shyti
[ Upstream commit ee01b6a386eaf9984b58a2476e8f531149679da9 ] The whole point of the previous fixes has been to change the CCS hardware configuration to generate only one stream available to the compute users. We did this by changing the info.engine_mask that is set during device probe, reset during the detection of the fused engines, and finally reset again when choosing the CCS mode. We can't use the engine_mask variable anymore, as with the current configuration, it imposes only one CCS no matter what the hardware configuration is. Before changing the engine_mask for the third time, save it and use it for calculating the CCS mode. After the previous changes, the user reported a performance drop to around 1/4. We have tested that the compute operations, with the current patch, have improved by the same factor. Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Gnattu OC <gnattuoc@me.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Tested-by: Jian Ye <jian.ye@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Tested-by: Gnattu OC <gnattuoc@me.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240517090616.242529-1-andi.shyti@linux.intel.com (cherry picked from commit a09d2327a9ba8e3f5be238bc1b7ca2809255b464) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12drm/i915/guc: avoid FIELD_PREP warningArnd Bergmann
[ Upstream commit d4f36db62396b73bed383c0b6e48d36278cafa78 ] With gcc-7 and earlier, there are lots of warnings like In file included from <command-line>:0:0: In function '__guc_context_policy_add_priority.isra.66', inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3, inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2: include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ... drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP' FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \ ^~~~~~~~~~ Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning. Fixes: 77b6f79df66e ("drm/i915/guc: Update to GuC version 69.0.3") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com (cherry picked from commit 364e039827ef628c650c21c1afe1c54d9c3296d9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12kthread: add kthread_stop_putAndreas Gruenbacher
[ Upstream commit 6309727ef27162deabd5c095c11af24970fba5a2 ] Add a kthread_stop_put() helper that stops a thread and puts its task struct. Use it to replace the various instances of kthread_stop() followed by put_task_struct(). Remove the kthread_stop_put() macro in usbip that is similar but doesn't return the result of kthread_stop(). [agruenba@redhat.com: fix kerneldoc comment] Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com [akpm@linux-foundation.org: document kthread_stop_put()'s argument] Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: bb9025f4432f ("dma-mapping: benchmark: fix up kthread-related error handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12pwm: Rename pwm_apply_state() to pwm_apply_might_sleep()Sean Young
[ Upstream commit c748a6d77c06a78651030e17da6beb278a1c9470 ] In order to introduce a pwm api which can be used from atomic context, we will need two functions for applying pwm changes: int pwm_apply_might_sleep(struct pwm *, struct pwm_state *); int pwm_apply_atomic(struct pwm *, struct pwm_state *); This commit just deals with renaming pwm_apply_state(), a following commit will introduce the pwm_apply_atomic() function. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Stable-dep-of: 974afccd3794 ("leds: pwm: Disable PWM when going to suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12i915: make inject_virtual_interrupt() voidChristian Brauner
[ Upstream commit 85884871921000b9bca2184077b1159771e50047 ] The single caller of inject_virtual_interrupt() ignores the return value anyway. This allows us to simplify eventfd_signal() in follow-up patches. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-1-bd549b14ce0c@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> Stable-dep-of: 82b951e6fbd3 ("vfio/pci: fix potential memory leak in vfio_intx_enable()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17drm/i915/bios: Fix parsing backlight BDB dataKarthikeyan Ramasubramanian
commit 43b26bdd2ee5cfca80939be910d5b23a50cd7f9d upstream. Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). v2: removed checking the block size of the backlight BDB data [vsyrjala: this is completely safe thanks to commit e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks")] Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17drm/i915/gt: Automate CCS Mode setting during engine resetsAndi Shyti
commit 51c1b42a232f17743cd825be6790cb64735ff98f upstream. We missed setting the CCS mode during resume and engine resets. Create a workaround to be added in the engine's workaround list. This workaround sets the XEHP_CCS_MODE value at every reset. The issue can be reproduced by running: $ clpeak --kernel-latency Without resetting the CCS mode, we encounter a fence timeout: Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2! Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Reported-by: Gnattu OC <gnattuoc@me.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Tested-by: Gnattu OC <gnattuoc@me.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com (cherry picked from commit 4cfca03f76413db115c3cc18f4370debb1b81b2b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17drm/i915/audio: Fix audio time stamp programming for DPChaitanya Kumar Borah
commit c66b8356273c8d22498f88e4223af47a7bf8a23c upstream. Intel hardware is capable of programming the Maud/Naud SDPs on its own based on real-time clocks. While doing so, it takes care of any deviations from the theoretical values. Programming the registers explicitly with static values can interfere with this logic. Therefore, let the HW decide the Maud and Naud SDPs on it's own. Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27drm/i915/mst: Limit MST+DSC to TGL+Ville Syrjälä
[ Upstream commit 51bc63392e96ca45d7be98bc43c180b174ffca09 ] The MST code currently assumes that glk+ already supports MST+DSC, which is incorrect. We need to check for TGL+ actually. ICL does support SST+DSC, but supposedly it can't do MST+FEC which will also rule out MST+DSC. Note that a straight TGL+ check doesn't work here because DSC support can get fused out, so we do need to also check 'has_dsc'. Cc: stable@vger.kernel.org Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-6-ville.syrjala@linux.intel.com (cherry picked from commit c9c92f286dbdf872390ef3e74dbe5f0641e46f55) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/vma: Fix UAF on destroy against retire raceJanusz Krzysztofik
commit 0e45882ca829b26b915162e8e86dbb1095768e9e upstream. Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - avoid mentioning multi-GT case in commit description (Rodrigo), - explain why we need to take a temporary wakeref unconditionally inside i915_vma_pin_ww() (Rodrigo). v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm wakerefs") (Andi), - for more easy backporting, split out removal of former insufficient workarounds and move them to separate patches (Nirmoy). - clean up commit message and description a bit. v3: Identify root cause more precisely, and a commit to blame, - identify and drop former workarounds, - update commit message and description. v2: Get the wakeref before VM mutex to avoid circular locking dependency, - drop questionable Fixes: tag. Fixes: d93939730347 ("drm/i915: Remove the vma refcount") Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875 Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-27drm/i915: Disable live M/N updates when using bigjoinerVille Syrjälä
[ Upstream commit 4a36e46df7aa781c756f09727d37dc2783f1ee75 ] All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change the timings at the same time. For now just disable live M/N updates when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Adjust seamless_m_n flag behaviourVille Syrjälä
[ Upstream commit 825edc8bc72f3266534a04e9a4447b12332fac82 ] Make the seamless_m_n flag more like the update_pipe fastset flag, ie. the flag will only be set if we need to do the seamless M/N update, and in all other cases the flag is cleared. Also rename the flag to update_m_n to make it more clear it's similar to update_pipe. I believe special casing seamless_m_n like this makes sense as it also affects eg. vblank evasion. We can potentially avoid some vblank evasion tricks, simplify some checks, and hopefully will help with the VRR vs. M/N mess. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Enable VRR later during fastsetsVille Syrjälä
[ Upstream commit 691dec86acc3afb469f09e9a4a00508b458bdb0c ] In order to reconcile seamless M/N updates with VRR we'll need to defer the fastset VRR enable to happen after the seamless M/N update (which happens during the vblank evade critical section). So just push the VRR enable to be the last thing during the update. This will also affect the vblank evasion as the transcoder will now still be running with the old VRR state during the vblank evasion. So just grab the timings always from the old crtc state during any non-modeset commit, and also grab the current state of VRR from the active timings (as we disable VRR before vblank evasion during fastsets). This also fixes vblank evasion for seamless M/N updates as we now properly account for the fact that the M/N update happens after vblank evasion. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Extract intel_crtc_vblank_evade_scanlines()Ville Syrjälä
[ Upstream commit f4b0cece716c95e16d973a774d5a5c5cc8cb335d ] Pull the vblank evasion scanline calculations into their own helper to declutter intel_pipe_update_start() a bit. Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915: Change intel_pipe_update_{start,end}() calling conventionVille Syrjälä
[ Upstream commit 09f390d4e2f38f8433431f4da31ca0a17a5c7853 ] We'll need to also look at the old crtc state in intel_pipe_update_start() so change the calling convention to just plumb in the full atomic state instead. Cc: Manasi Navare <navaremanasi@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Stable-dep-of: 4a36e46df7aa ("drm/i915: Disable live M/N updates when using bigjoiner") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/cdclk: Fix voltage_level programming edge caseVille Syrjälä
[ Upstream commit 6154cc9177ccea00c89ce0bf93352e474b819ff2 ] Currently we only consider the relationship of the old and new CDCLK frequencies when determining whether to do the repgramming from intel_set_cdclk_pre_plane_update() or intel_set_cdclk_post_plane_update(). It is technically possible to have a situation where the CDCLK frequency is decreasing, but the voltage_level is increasing due a DDI port. In this case we should bump the voltage level already in intel_set_cdclk_pre_plane_update() (so that the voltage_level will have been increased by the time the port gets enabled), while leaving the CDCLK frequency unchanged (as active planes/etc. may still depend on it). We can then reduce the CDCLK frequency to its final value from intel_set_cdclk_post_plane_update(). In order to handle that correctly we shall construct a suitable amalgam of the old and new cdclk states in intel_set_cdclk_pre_plane_update(). And we can simply call intel_set_cdclk() unconditionally in both places as it will not do anything if nothing actually changes vs. the current hw state. v2: Handle cdclk_state->disable_pipes v3: Only synchronize the cd2x update against the pipe's vblank when the cdclk frequency is changing during the current commit phase (Gustavo) Cc: stable@vger.kernel.org Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com (cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27drm/i915/mst: Reject FEC+MST on ICLVille Syrjälä
[ Upstream commit 99f855082f228cdcecd6ab768d3b8b505e0eb028 ] ICL supposedly doesn't support FEC on MST. Reject it. Cc: stable@vger.kernel.org Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path") Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-7-ville.syrjala@linux.intel.com (cherry picked from commit b648ce2a28ba83c4fa67c61fcc5983e15e9d4afb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 14:22:21 +0000