summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_drv.c
AgeCommit message (Collapse)Author
2014-12-24Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2"Dave Airlie
This reverts commit 355a70183848f21198e9f6296bd646df3478a26d. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-12-15drm/i915: sanitize RPS resetting during GPU resetImre Deak
Atm, we don't disable RPS interrupts and related work items before resetting the GPU. This may interfere with the following GPU initialization and cause RPS interrupts to show up in PM_IIR too early before calling gen6_enable_rps_interrupts() (triggering a WARN there). Solve this by disabling RPS interrupts and flushing any related work items before resetting the GPU. v2: - split out the common parts of the gt suspend and the new gt reset functions (Paulo) v3: - remove the check for UMS, it's a NOP nowadays (Daniel) Reported-by: He, Shuang <shuang.he@intel.com> Testcase: igt/gem_reset_stats/ban-render Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86644 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-08drm/i915: resume MST after reading back hw stateDave Airlie
Otherwise the MST resume paths can hit DPMS paths which hit state checker paths, which hit WARN_ON, because the state checker is inconsistent with the hw. This fixes a bunch of WARN_ON's on resume after undocking. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-03drm/i915: Grab modeset locks for GPU rest on pre-ctgVille Syrjälä
On gen4 and earlier the GPU reset also resets the display, so we should protect against concurrent modeset operations. Grab all the modeset locks around the entire GPU reset dance, remebering first ti dislogde any pending page flip to make sure we don't deadlock. Any pageflip coming in between these two steps should fail anyway due to reset_in_progress, so this should be safe. This fixes a lot of failed asserts in the modeset code when there's a modeset racing with the reset. Naturally the asserts aren't happy when the expected state has disappeared. v2: Drop UMS checks, complete pending flips after the reset (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/i915: Implement GPU reset for g33Ville Syrjälä
g33 seems to sit somewhere between the 915/945/965 style and the g4x style. The bits look like g4x, but we still need to do a full reset including display. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/i915: Implement GPU reset for 915/945Ville Syrjälä
915/945 have the same reset registers as 965, so share the code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/i915: Restore the display config after a GPU reset on gen4Ville Syrjälä
On pre-ctg GPU reset also resets the display hardware. Force a mode restore after the GPU reset, and also re-init clock gating. v2: Use intel_modeset_init_hw() instead of intel_init_clock_gating() in case more relevant stuff gets added there at some point Restore interrupts after the reset as well Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03Merge tag 'drm-intel-next-2014-11-21-fixed' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next drm-intel-next-2014-11-21: - infoframe tracking (for fastboot) from Jesse - start of the dri1/ums support removal - vlv forcewake timeout fixes (Imre) - bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom O'Rourke) - on-demand pinning for execlist contexts - vlv/chv backlight improvements (Ville) - gen8+ render ctx w/a work from various people - skl edp programming (Satheeshakrishna et al.) - psr docbook (Rodrigo) - piles of little fixes and improvements all over, as usual * tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits) drm/i915: Don't pin LRC in GGTT when dumping in debugfs drm/i915: Update DRIVER_DATE to 20141121 drm/i915/g4x: fix g4x infoframe readout drm/i915: Only call mod_timer() if not already pending drm/i915: Don't rely upon encoder->type for infoframe hw state readout drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave drm/i915: Use ggtt error obj capture helper for gen8 semaphores drm/i915: vlv: increase timeout when setting idle GPU freq drm/i915: vlv: fix cdclk setting during modeset while suspended drm/i915: Dump hdmi pipe_config state drm/i915: Gen9 shadowed registers drm/i915/skl: Gen9 multi-engine forcewake drm/i915: Read power well status before other registers for drpc info drm/i915: Pin tiled objects for L-shaped configs drm/i915: Update ring freq for full gpu freq range drm/i915: change initial rps frequency for gen8 drm/i915: Keep min freq above floor on HSW/BDW drm/i915: Use efficient frequency for HSW/BDW drm/i915: Can i915_gem_init_ioctl drm/i915: Sanitize ->lastclose ...
2014-11-21drm/gem: Warn on illegal use of the dumb buffer interface v2Thomas Hellstrom
It happens on occasion that developers of generic user-space applications abuse the dumb buffer API to get hold of drm buffers that they can both mmap() and use for GPU acceleration, using the assumptions that dumb buffers and buffers available for GPU are a) The same type and can be aribtrarily type-casted. b) fully coherent. This patch makes the most widely used drivers warn nicely when that happens, the next step will be to fail. v2: Move drmP.h changes to drm_gem.h. Fix Radeon dumb mmap breakage. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-20drm/i915: Ditch dev_priv->ums.mm_suspendDaniel Vetter
Again just complicates gem init functions and makes a general mess out of everything. Good riddance! v2: In my enthusiasm to start removing dri1/ums crud I went overboard a bit and killed parts of hangcheck. Resurrect it. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-19drm/i915: Remove DRI1 ring accessors and APIChris Wilson
With the deprecation of UMS, and by association DRI1, we have a tough choice when updating the ring access routines. We either rewrite the DRI1 routines blindly without testing (so likely to be broken) or take the liberty of declaring them no longer supported and remove them entirely. This takes the latter approach. v2: Also remove the DRI1 sarea updates Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Fix rebase conflicts.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-19drm/i915: disable rps irqs earlier during suspend/unloadImre Deak
After the previous patch RPS disabling doesn't depend any more on the first level interrupts being disabled, so we can move it everywhere earlier. Doing so let's us think about the uninitialization steps afterwards independently of any asynchronous RPS events that can happen atm. It also makes the system/runtime suspend time RPS disabling more uniform. Finally this gets rid of the WARN in intel_suspend_gt_powersave(), which we can hit if a final RPS work runs after we disabled the first level interrupts. Testcase: igt/pm_rpm Reference: https://bugs.freedesktop.org/show_bug.cgi?id=82939 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: remove the unnecessary block around display.hpd_irq_setupJani Nikula
The block was added for spin_lock_irqsave flags, but since the locking was converted to spin_lock_irq variant, the block is no longer needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-07drm/i915: fix RPS on runtime suspendPaulo Zanoni
With this patch, the RPS sequence for runtime suspend/resume is exactly like the sequence for S3 suspend/resume: - flush_delayed_work(&dev_priv->rps.delayed_resume_work) - intel_runtime_pm_disable_interrupts() - intel_suspend_gt_powersave() (suspended) - intel_runtime_pm_enable_interrupts() - intel_enable_gt_powersave() With this, we get rid of WARNs that are currently intermittently triggered by the system-suspend-execbuf subtest of runtime PM. Notice that these WARNs could also be triggered in other ways that involved doing lots of RPM suspend/resume cycles just after a system S3 resume. Testcase: igt/pm_rpm/system-suspend-execbuf Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reference: https://bugs.freedesktop.org/show_bug.cgi?id=82939 Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04drm/i915: run hsw_disable_pc8() later on resumePaulo Zanoni
We want to run intel_uncore_early_sanitize() before we touch any registers, because on BDW, when we resume, the FPGA_DBG_RM_NOCLAIM bit is set, so we need to clear it - through intel_uncore_early_sanitize() - before we do anything else. With the current code, we don't clear the bit before our first register access, so we print a WARN complaining about an unclaimed register error. v1: Was called "drm/i915: run intel_uncore_early_sanitize earlier on resume" v2: Was called "drm/i915: run intel_uncore_early_sanitize earlier on resume on non-VLV" v3: This one, on top of the intel_resume_prepare() rework. v4: Rebase. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-04drm/i915: kill intel_resume_prepare()Paulo Zanoni
Because, really, the abstraction is not working for us. It is nice for VLV, but doesn't add anything useful on SNB/HSW/BDW. We want to change this code due to a recently-discovered bug, but we can't seem to find a nice solution that repects the current abstraction. So let's kill intel_resume_prepare() and its friends, and add an equivalent implementation to both its callers. Also, look at the diffstat! v2: - Rebase. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: add comments on what stage a given PM handler is calledImre Deak
This will hopefully make it easier to navigate the code without the need to consult the full PM documentation. v2: - add a comment that the freeze handler is also called after rebooting - add a comment that the thaw handler is also called to recover from errors (Ville) - add the PM event names (PMSG_THAW etc.) for reference (Ville) - add comments that s0ix can be handled both via system and runtime suspend (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: unify switcheroo and legacy suspend/resume handlersImre Deak
By now we handle switcheroo and legacy suspend/resume the same way, so no need to keep separate functions for them. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: add poweroff_late handlerImre Deak
The suspend_late handler saves some registers and powers off the device, so it doesn't have a big overhead. Calling it at S4 poweroff_late time makes the power off handling identical to the S3 suspend and S4 freeze handling, so do this for consistency. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: sanitize suspend/resume helper function namesImre Deak
By now the S4 freeze/thaw and S3 suspend/resume events are handled the same way, so we can rename the freeze/thaw internal helpers to suspend/resume accordingly to make clearer what the helpers do. Also rename i915_resume_early to i915_drm_resume_early aligning it with the rest of the helper names. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: unify S3 and S4 suspend/resume handlersImre Deak
The S3 and S4 events are now handled the same way internally, there is no need to keep separate wrapper functions around them. Simply reuse the suspend/resume versions everywhere. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: disable/re-enable PCI device around S4 freeze/thawImre Deak
We already disable everything during S4 freeze, except the PCI device itself. There is no reason why we couldn't disable that too and doing so allows us to unify these handlers in the next patch with the corresponding S3 suspend/resume handlers. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: enable output polling during S4 thawImre Deak
To avoid processing hotplug events we disable connector polling for the duration of S3 suspend. We also disable it for S4 freeze, and keep it disabled after S4 thaw. This won't prevent though hotplug processing, since we re-enable interrupts anyway. There is also no need to prevent it at that time, since we reinitialize everything during thaw, so the device is in a consistent state. So to simplify things enable polling during thaw, which will allow us to handle S4 thaw the same way as S3 resume in an upcoming patch. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: check for GT faults in all resume handlers and driver load timeImre Deak
Checking for GT faults is not specific in any way to S4 thaw, so do it also during S3 resume, S4 restore and driver load time. This allows us to unify the Sx handlers in an upcoming patch. v2: - move the check to intel_uncore_early_sanitize(), so we check at driver load time too (Chris) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: remove unused restore_gtt_mappings optimization during suspendImre Deak
The logic to skip restoring GTT mappings was added to speed up suspend/resume, but not on old GENs where not restoring them caused problems. The check for old GENs is based on the existence of OpRegion, but this doesn't work since opregion is initialized only after the check. So we end up always restoring the mappings. On my BYT - which has OpRegion - skipping restoring the mappings during suspend doesn't work, I get a GPU hang after resume. Also the logic of when to allow the optimization during S4 is reversed: we should allow it during S4 thaw but not during S4 restore, but atm we have it the other way around in the code. Since correctness wins over optimal code and since the optimization wasn't used anyway I decided not to try to fix it at this point, but just remove it. This allows us to unify the S3 and S4 handlers in the following patches. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: fix S4 suspend while switcheroo state is offImre Deak
If the device is suspended already through the switcheroo interface we shouldn't suspend it again or resume it after suspend. We have the corresponding check for S3 suspend already, add it for all the other S3 and S4 handlers. Also move the check from i915_resume_early() to i915_resume_legacy(), so that it's done in the high level handler for all PM events. v2: - fix the resume path too, we don't need to special case there DRM_SWITCH_POWER_OFF with the device being enabled (in which case we'd have to disable the device), since that never happens (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: vlv: fix switcheroo/legacy suspend/resumeImre Deak
During switcheroo/legacy suspend we don't call the suspend_late handler but when resuming afterwards we call resume_early. This happened to work so far, since suspend_late only disabled the PCI device. This changed in commit 016970beb05da6285c2f3ed2bee1c676cb75972e Author: Sagar Kamble <sagar.a.kamble@intel.com> Date: Wed Aug 13 23:07:06 2014 +0530 drm/i915: Sharing platform specific sequence between runtime and system susp after which we also saved/restored the VLV Gunit HW state in suspend_late/resume_early. So now since we don't save the state during suspend a following resume will restore a corrupted state. Fix this by calling the suspend_late handler during both switcheroo and legacy suspend. CC: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: propagate error from legacy resume handlerImre Deak
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: unify legacy S3 suspend and S4 freeze handlersImre Deak
i915_suspend() is called from the DRM legacy S3 suspend/S4 freeze paths and the switcheroo suspend path. For switcheroo we only ever need to perform a full suspend (PM_EVENT_SUSPEND) and for the DRM legacy path we can handle the S4 freeze (PM_EVENT_FREEZE) the same way as S3 suspend. The only difference atm between suspend and freeze is that during freeze we don't disable the PCI device, but there is no reason why we can't do so. So unify the two cases to reduce complexity. Note that for the DRM legacy case the thaw event is not handled, so we disable the display before creating the hibernation image and it won't get re-enabled until reboot. We could fix this leaving the display enabled for the image creation/writing (if we care enough about UMS), but this can be done as a follow-up. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: factor out i915_drm_suspend_lateImre Deak
This is needed by an upcoming patch fixing the switcheroo/legacy suspend paths. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: vlv: fix gunit HW state corruption during S4 suspendImre Deak
During S4 freeze we don't call intel_suspend_complete(), which would save the gunit HW state, but during S4 thaw/restore events we call intel_resume_prepare() which restores it, thus ending up in a corrupted HW state. Fix this by calling intel_suspend_complete() from the corresponding freeze_late event handler. The issue was introduced in commit 016970beb05da6285c2f3ed2bee1c676cb75972e Author: Sagar Kamble <sagar.a.kamble@intel.com> Date: Wed Aug 13 23:07:06 2014 +0530 CC: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: remove dead code from legacy suspend handlerImre Deak
The legacy DRM suspend logic (effective in UMS) doesn't handle any S4 thaw events so we don't need to care about it either. Only S3 suspend and S4 freeze events are handled. Leave an assert behind to be sure. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915/skl: Don't check for ULT/ULX when detecting the PCHDamien Lespiau
IS_ULT() wasn't taking into account SKL so we had a warn with SPT-LP. We don't realy need those checks here, and as we don't need to introduce IS_SKL_ULT/ULX() at the moment, let's just drop them. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-24drm/i915: Use IS_HSW_ULT() in a HSW specific code pathDamien Lespiau
No need to add the BDW pci ULT/ULX checks inside a if (IS_HASWELL(dev)) code path. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-03drm/i915: Use dev_priv instead of dev in irq setup functionsDaniel Vetter
It's the new world order! Not going full monty on these here and rolling this out throughout the subsequent call chains since this is just for the kerneldoc. Later on we can go more crazy, especially once we've embedded drm_device correctly. v2: Also frob the runtime_pm functions ... Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-10-01drm/i915: Reinstate error level message for non-simulated gpu hangsDaniel Vetter
This seems to have been accidentally lost in commit be62acb4cce1389a28296852737e3917d9cc5b25 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Fri Aug 30 16:19:28 2013 +0300 drm/i915: ban badly behaving contexts Without this real gpu hangs only log output at info level, which gets filtered away by piglit's testrunner. v2: Tune down to notice level. Note that we need to add drm/i915 so that at least the automatic igt dmesg filtering still picks it up. v3: git add and lack of coffee don't mix well. v4: Message is in between hw and sw reset, so switch verb to continuous form. v5: Use i915_stop_rings_allow_warn for consistency. For Chris' case of injecting lots of hangs I guess we need to revamp this all anyway when merging. For now this should plug the regression for piglit testing mesa. v6: Make it compile (Mika). Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kenneth Graunke <kenneth@whitecape.org> Reported-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-10-01drm/i915: Remove intel_modeset_suspend_hwDaniel Vetter
Another layer of indirection for just an lpt-only w/a is a bit excessive. Reduce it. This was added in commit 7d708ee40a6b9ca1112a322e554c887df105b025 Author: Imre Deak <imre.deak@intel.com> Date: Wed Apr 17 14:04:50 2013 +0300 drm/i915: HSW: allow PCH clock gating for suspend Cc: Imre Deak <imre.deak@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-30Merge branch 'topic/skl-stage1' into drm-intel-next-queuedDaniel Vetter
SKL stage 1 patches still need polish so will likely miss the 3.18 merge window. We've decided to postpone to 3.19 so let's pull this in to make patch merging and conflict handling easier. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-09-24drm/i915/skl: Sunrise Point PCH detectionSatheeshakrishna M
This patch implements detection of SPT and SPT-LP PCH devices. v2: Added HAS_PCH_SPT macro Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-24drm/i915/skl: SKL FBC enablementDaisy Sun
Enable FBC feature on Skylake Issue: VIZ-3788 Reviewed-by: Thomas Wood <thomas.wood@intel.com> Signed-off-by: Daisy Sun <daisy.sun@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-24drm/i915/skl: Add an IS_SKYLAKE macroSatheeshakrishna M
Adding new macro IS_SKYLAKE for skylake specific implementation. Reviewed-by: Thomas Wood <thomas.wood@intel.com> Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-24drm/i915/skl: Add the Skylake PCI idsDamien Lespiau
v2: Squash in 2nd patch from Damien for more ids (Daniel) v3: info->has*ring -> info->ring_mask conversion. Also add VEBOX support. v4: Fold in update from Damien v5: Rebase and add GEN_DEFAULT_PIPEOFFSETS v6: Add more PCI ID (Vandana) v7: Rebase and add IVB_CURSOR_OFFSETS v8: Renamed the macro from _PCI_IDS to _IDS for consistency Reviewed-by: Thomas Wood <thomas.wood@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-19drm/i915: Clarify irq_lock locking, special casesDaniel Vetter
Grab bag for all the special cases: - i9xx_check_fifo_underruns is only called from crtc_enable hooks, i.e. process context. - i915_enable_asle_pipestat is only called from interrupt postinstall hooks. So again process context. - gen8_irq_power_well_post_enable is called from the runtime pm code, which again means process context. - The open-coded hpd_irq_setup loop in _thaw is also running in process context. So for all of them the plain _irq variant is sufficient. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-19drm/i915: Restore resume irq ordering commentDaniel Vetter
This was lost in commit e11aa362308f5de467ce355a2a2471321b15a35c Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Jun 18 09:52:55 2014 -0700 drm/i915: use runtime irq suspend/resume in freeze/thaw which makes the second part of this commen a bit nonsense. Both were originally added in commit 15239099d7a7a9ecdc1ccb5b187ae4cda5488ff9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 5 09:50:58 2013 +0100 drm/i915: enable irqs earlier when resuming Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-19drm/i915: Don't reinit hpd interrupts after gpu resetDaniel Vetter
Somehow I've overlooked this when simplifying the irq reinit scheme on gen4.5+ in commit 78ad455fd229c6f6cc2f390ccbe0d8f1a62d55a9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu May 22 22:18:21 2014 +0200 drm/i915: Improve irq handling after gpu resets Since display interrups in general survive a gpu reset on those platforms there's also no need to reinit the hotplug settings. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-16Merge tag 'drm-intel-next-2014-09-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next - final bits (again) for the rotation support (Sonika Jindal) - support bl_power in the intel backlight (Jani) - vdd handling improvements from Ville - i830M fixes from Ville - piles of prep work all over to make skl enabling just plug in (Damien, Sonika) - rename DP training defines to reflect latest edp standards, this touches all drm drivers supporting DP (Sonika Jindal) - cache edids during single detect cycle to avoid re-reading it for e.g. audio, from Chris - move w/a for registers which are stored in the hw context to the context init code (Arun&Damien) - edp panel power sequencer fixes, helps chv a lot (Ville) - piles of other chv fixes all over - much more paranoid pageflip handling with stall detection and better recovery from Chris - small things all over, as usual * tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits) drm/i915: Update DRIVER_DATE to 20140905 drm/i915: Decouple the stuck pageflip on modeset drm/i915: Check for a stalled page flip after each vblank drm/i915: Introduce a for_each_plane() macro drm/i915: Rewrite ABS_DIFF() in a safer manner drm/i915: Add comments explaining the vdd on/off functions drm/i915: Move DP port disable to post_disable for pch platforms drm/i915: Enable DP port earlier drm/i915: Turn on panel power before doing aux transfers drm/i915: Be more careful when picking the initial power sequencer pipe drm/i915: Reset power sequencer pipe tracking when disp2d is off drm/i915: Track which port is using which pipe's power sequencer drm/i915: Fix edp vdd locking drm/i915: Reset the HEAD pointer for the ring after writing START drm/i915: Fix unsafe vma iteration in i915_drop_caches drm/i915: init sprites with univeral plane init function drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code drm/i915: Don't call gen8_fbc_sw_flush() on chv ...
2014-09-10drm: add driver->set_busid() callbackDavid Herrmann
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-03drm/i915: Add "Intel Corporation" as module authorDamien Lespiau
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03drm/i915: Don't use a define when it's clearer to just put the valueDamien Lespiau
Instead of going through hoops, just put the driver author directly as DRM_AUTHOR() argument. This will also make it consistent when we add Intel to the list. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-09-03drm/i915: send PCI_D3hot adapter opregion message on BDW RPM suspendPaulo Zanoni
On BDW we're seeing a problem that after we runtime resume, the outputs connected to DDI C are not detected: they don't appear in the SDEISR register and GMBUS transactions don't work. They stop working at the moment we call intel_opregion_notify_adapter() during runtime suspend, but they don't go back to work when we call the same function during runtime resume. They only work after we do a modeset and call intel_opregion_notify_encoder(), but this point is already too late. While debugging, I tried to pass PCI_D3hot which is the value that matches the spec, and it seems to have solved the problem. I couldn't find any explanation of why this solves the problem, but there's also no documented explanation - besides our code and git log - of why Haswell should use PCI_D1, so keep this for now in order to keep BDW runtime PM working. Also add a comment to point the fact that there's no spec documenting all the weirdness involved here. Cc: kristen.c.accardi@intel.com Testcase: igt/pm_rpm/drm-resources-equal Testcase: igt/pm_rpm/i2c Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:39:23 +0000