Age | Commit message (Collapse) | Author |
|
PCI IDs for PVC were never added and platform always marked with
force_probe. Drop what's not used and rename some places as needed.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
With no platform using graphics/media IP_VER(12, 50), replace the
checks throughout the code with IP_VER(12, 55) so the code makes sense
by itself with no additional explanation of previous baggage.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
PCI IDs for XEHPSDV were never added and platform always marked with
force_probe. Drop what's not used and rename some places to either be
xehp or dg2, depending on the platform/IP checks.
The registers not used anymore are also removed.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320060543.4034215-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Disable clockgating for TDL SVHS fub.
v2: Implement in general render/compute wa's(MattR)
Bspec: 46045
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318210025.562698-1-radhakrishna.sripada@intel.com
|
|
With dynamic load-balancing disabled on the compute side, there's no
reason left to enable WA 16015675438. Drop it from both PVC and DG2.
Note that this can be done because now the driver always set a fixed
partition of EUs during initialization via the ccs_mode configuration.
The flag to GuC is still needed because of 18020744125, so update
the comment accordingly.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Mateusz Jablonski <mateusz.jablonski@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306144723.1826977-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Use the new w/a KLV support to enable a MTL w/a. Note, this w/a is a
super-set of Wa_16019325821, so requires turning that one as well as
setting the new flag for Wa_14019159160 itself.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223205632.1621019-4-John.C.Harrison@Intel.com
|
|
To prevent running out of bits, new w/a enable flags are being added
via a KLV system instead of a 32 bit flags word.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223205632.1621019-3-John.C.Harrison@Intel.com
|
|
Some platforms require holding RCS context switches until CCS is idle
(the reverse w/a of Wa_14014475959). Some platforms require both
versions.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223205632.1621019-2-John.C.Harrison@Intel.com
|
|
Allow user to provide a low latency context hint. When set, KMD
sends a hint to GuC which results in special handling for this
context. SLPC will ramp the GT frequency aggressively every time
it switches to this context. The down freq threshold will also be
lower so GuC will ramp down the GT freq for this context more slowly.
We also disable waitboost for this context as that will interfere with
the strategy.
We need to enable the use of SLPC Compute strategy during init, but
it will apply only to contexts that set this bit during context
creation.
Userland can check whether this feature is supported using a new param-
I915_PARAM_HAS_CONTEXT_FREQ_HINT. This flag is true for all guc submission
enabled platforms as they use SLPC for frequency management.
The Mesa usage model for this flag is here -
https://gitlab.freedesktop.org/sushmave/mesa/-/commits/compute_hint
v2: Rename flags as per review suggestions (Rodrigo, Tvrtko).
Also, use flag bits in intel_context as it allows finer control for
toggling per engine if needed (Tvrtko).
v3: Minor review comments (Tvrtko)
v4: Update comment (Sushma)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240306012759.204938-1-vinay.belgaumkar@intel.com
|
|
Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee11 ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
|
|
The above w/a is required for every platform that the i915 driver
supports. It is fixed on the latest platforms but they are only
supported by Xe instead of i915. So just remove the platform check
completely and keep the code simple.
v2: Add extra comment (review feedback from Rodrigo).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223202846.1532176-1-John.C.Harrison@Intel.com
|
|
While trying to reproduce some other issues reported by CI for i915
hangcheck live selftest, I found them hidden behind timeout failures
reported by igt_hang_sanitycheck -- the very first hangcheck test case
executed.
Feb 22 19:49:06 DUT1394ACMR kernel: calling mei_gsc_driver_init+0x0/0xff0 [mei_gsc] @ 121074
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] Cannot find any crtc or sizes
Feb 22 19:49:06 DUT1394ACMR kernel: probe of i915.mei-gsc.768 returned 0 after 1475 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: probe of i915.mei-gscfi.768 returned 0 after 1441 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: initcall mei_gsc_driver_init+0x0/0xff0 [mei_gsc] returned 0 after 3010 usecs
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG_GEM enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915 0000:03:00.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
Feb 22 19:49:06 DUT1394ACMR kernel: i915: Performing live selftests with st_random_seed=0x4c26c048 st_timeout=500
Feb 22 19:49:07 DUT1394ACMR kernel: i915: Running hangcheck
Feb 22 19:49:07 DUT1394ACMR kernel: calling mei_hdcp_driver_init+0x0/0xff0 [mei_hdcp] @ 121074
Feb 22 19:49:07 DUT1394ACMR kernel: i915: Running intel_hangcheck_live_selftests/igt_hang_sanitycheck
Feb 22 19:49:07 DUT1394ACMR kernel: probe of 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04 returned 0 after 1398 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: probe of i915.mei-gsc.768-b638ab7e-94e2-4ea2-a552-d1c54b627f04 returned 0 after 97 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: initcall mei_hdcp_driver_init+0x0/0xff0 [mei_hdcp] returned 0 after 101960 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: calling mei_pxp_driver_init+0x0/0xff0 [mei_pxp] @ 121094
Feb 22 19:49:07 DUT1394ACMR kernel: probe of 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 returned 0 after 435 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: mei_pxp i915.mei-gsc.768-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:03:00.0 (ops i915_pxp_tee_component_ops [i915])
Feb 22 19:49:07 DUT1394ACMR kernel: 100ms wait for request failed on rcs0, err=-62
Feb 22 19:49:07 DUT1394ACMR kernel: probe of i915.mei-gsc.768-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 returned 0 after 158425 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: initcall mei_pxp_driver_init+0x0/0xff0 [mei_pxp] returned 0 after 224159 usecs
Feb 22 19:49:07 DUT1394ACMR kernel: i915/intel_hangcheck_live_selftests: igt_hang_sanitycheck failed with error -5
Feb 22 19:49:07 DUT1394ACMR kernel: i915: probe of 0000:03:00.0 failed with error -5
Those request waits, once timed out after 100ms, have never been
confirmed to still persist over another 100ms, always being able to
complete within the originally requested wait time doubled.
Taking into account potentially significant additional concurrent workload
generated by new auxiliary drivers that didn't exist before and now are
loaded in parallel with the i915 module also when loaded in selftest mode,
relax our expectations on time consumed by the sanity check request before
it completes.
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228152500.38267-2-janusz.krzysztofik@linux.intel.com
|
|
The EIR register (0x20B0) was being included in the engine class list
for render and compute as the absolute register address. However, it
is actually a ring register available on all engines at an offset of
(base) + 0xB0. As it was included as an RCS engine but with the
absolute address, GuC was adding on another 0x2000 and coming out at
an invalid location. Thus it would reject the register and complain
about only managing a partial capture.
So update the list to use the RING_EIR version of the register and
include it for all engines.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203204.1533410-1-John.C.Harrison@Intel.com
|
|
Get the guc reference from the gt using the gt_to_guc() helper.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229102734.674362-3-andi.shyti@linux.intel.com
|
|
We already have guc_to_gt() and getting to guc from the GT it
requires some mental effort. Add the gt_to_guc().
Given the reference to the "gt", the gt_to_guc() will return the
pinter to the "guc".
Update all the files under the gt/ directory.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229102734.674362-2-andi.shyti@linux.intel.com
|
|
https://anongit.freedesktop.org/git/drm/drm-misc into drm-next
Short summary of fixes pull:
i915:
- Fix NULL-pointer deref
imx:
- dcss: Fix resource-size calculation
firmware:
- sysfb: Fix returned error code
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229085331.GA25863@localhost.localdomain
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #2 for v6.9:
Features and functionality:
- DP tunneling and bandwidth allocation support (Imre)
- Add more ADL-N PCI IDs (Gustavo)
- Enable fastboot also on older platforms (Ville)
- Bigjoiner force enable debugfs option for testing (Stan)
Refactoring and cleanups:
- Remove unused structs and struct members (Jiri Slaby)
- Use per-device debug logging (Ville)
- State check improvements (Ville)
- Hardcoded cd2x divider cleanups (Ville)
- CDCLK documentation updates (Ville, Rodrigo)
Fixes:
- HDCP MST Type1 fixes (Suraj)
- Fix MTL C20 PHY PLL values (Ravi)
- More hardware access prevention during init (Imre)
- Always enable decompression with tile4 on Xe2 (Juha-Pekka)
- Improve LNL package C residency (Suraj)
drm core changes:
- DP tunneling and bandwidth allocation helpers (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sf1devbj.fsf@intel.com
|
|
Backmerging from drm/drm-next to prepare drm-misc-next-fixes for
the rest of the release cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Request can be NULL if no guilty request was identified so simply use
engine->i915 instead.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: d50892a9554c ("drm/i915: switch from drm_debug_printer() to device specific drm_dbg_printer()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20240219131423.1854991-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
intel_guc::ads_engine_usage_size was never used since its addition in
commit 77cdd054dd2c (drm/i915/pmu: Connect engine busyness stats from
GuC to pmu). Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216065326.6910-9-jirislaby@kernel.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.9:
UAPI Changes:
Cross-subsystem Changes:
arch:
- powerpc/ps3: select CONFIG_VIDEO
Core Changes:
ci:
- msm: fix apq8016 runner
display:
- use newer DRM print helpers
documentation:
- fix typos
print:
- add device-specific error and debug printers
sysfb:
- set Linux parent device for firmware framebuffer
tests:
- mm: use newer DRM print helpers
Driver Changes:
bridge:
- switch to ->read_edid callback throughout the bridge
drivers
- remove old ->get_edid callback
i915:
- use newer DRM print helpers
lima:
- improve stability by fixes to error handling and recovery
mediathek:
- switch to ->read_edid callback
msm:
- switch to ->read_edid callback
omap:
- switch to ->read_edid callback
panel:
- add Powkiddy RGB10MAX3 plus DT bindings
- st7703: support panel rotation plus DT bindings
rockchip:
- DT bindings: remove port, add power-domains
xe:
- use newer DRM print helpers
xlnx:
- switch to ->read_edid callback
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXOD/oACgkQaA3BHVML
# eiMWMAgArTVXF4UQ+FUxYZB5QTm2veYIpilvwmzaQLNxsM9SsWpzwMIVAi+xf93g
# uqUqkl6QvZ9pJg6bxuXRNcJw/GObIO4x6tn+LkbccczgHiHwvn6ydNdUoMx8ulne
# EsGC0z8bb5Gpwh9b/pnBul2AoIE7PHAJltgH271/O2xnhFMUbchQ0ckHvWnn8/GA
# Nef145ySX4gkYtY8u2TRr4r6Bkp7Tpiyv6ipU7Cpu7KqyveTDMx3c9r5FaiHnJT/
# Hx/5s87q0Bx2m+iNjlBLJzYjF2UWth+pbfiu3xwyWOE7hdkPLwCQ5mqHWcFFqxfb
# Vuj9jP+Vb68L7EvGpq2LArLdhZjHIQ==
# =SsjX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 15 Feb 2024 23:22:02 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215132610.GA1464@localhost.localdomain
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Add GuC submission interface version query (Tvrtko Ursulin)
Driver Changes:
Fixes/improvements/new stuff:
- Atomically invalidate userptr on mmu-notifier (Jonathan Cavitt)
- Update handling of MMIO triggered reports (Umesh Nerlige Ramappa)
- Don't make assumptions about intel_wakeref_t type (Jani Nikula)
- Add workaround 14019877138 [xelpg] (Tejas Upadhyay)
- Allow for very slow HuC loading [huc] (John Harrison)
- Flush context destruction worker at suspend [guc] (Alan Previn)
- Close deregister-context race against CT-loss [guc] (Alan Previn)
- Avoid circular locking issue on busyness flush [guc] (John Harrison)
- Use rc6.supported flag from intel_gt for rc6_enable sysfs (Juan Escamilla)
- Reflect the true and current status of rc6_enable (Juan Escamilla)
- Wake GT before sending H2G message [mtl] (Vinay Belgaumkar)
- Restart the heartbeat timer when forcing a pulse (John Harrison)
Future platform enablement:
- Extend driver code of Xe_LPG to Xe_LPG+ [xelpg] (Harish Chegondi)
- Extend some workarounds/tuning to gfx version 12.74 [xelpg] (Matt Roper)
Miscellaneous:
- Reconcile Excess struct member kernel-doc warnings (Randy Dunlap)
- Change wa and EU_PERF_CNTL registers to MCR type [guc] (Shuicheng Lin)
- Add flex arrays to struct i915_syncmap (Erick Archer)
- Increasing the sleep time for live_rc6_manual [selftests] (Anirban Sk)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zc3iIVsiAwo+bu10@tursulin-desk
|
|
The context persistence code does things like send super high priority
heartbeat pulses to ensure any leaked context can still be pre-empted
and thus isn't a total denial of service but only a minor denial of
service. Unfortunately, it wasn't bothering to restart the heartbeat
worker with a fresh timeout. Thus, if a persistent context happened to
be closed just before the heartbeat was going to go ping anyway then
the forced pulse would get a negligble execution time. And as the
forced pulse is super high priority, the worker thread's next step is
a reset. Which means a potentially innocent system randomly goes boom
when attempting to close a context. So, force a re-schedule of the
worker thread with the appropriate timeout.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110210216.4125092-1-John.C.Harrison@Intel.com
|
|
Sometimes gt_pm live_rc6_manual selftest fails due to no power being
measured for the rc6 disabled period. Therefore increasing the rc6 disable
period from 250ms to 1000ms to rule out such sporadic failure.
v3:
- More descriptive and improved commit message (Anshuman)
Signed-off-by: Anirban Sk <sk.anirban@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212050738.1162198-1-sk.anirban@intel.com
|
|
There's already a related drm_printer. Use it to preserve the context
instead of a separate pr_err().
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/246c0c275d05c919d959983e1784e3f7347f4540.1705410327.git.jani.nikula@intel.com
|
|
Prefer the device specific debug printer.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f2614dfcba295be20c650cdab24c3979d265f422.1705410327.git.jani.nikula@intel.com
|
|
With few users for drm_err_printer(), it's still feasible to convert it
to be device specific. Use drm_err() under the hood.
While at it, make the prefix optional.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2a9cdcfc1df44568078f7c131e2e7e0f7c94e97e.1705410327.git.jani.nikula@intel.com
|
|
0x108100 and 0x1080c0 have been around since snb. Rename the
defines appropriately.
v2: Rebase
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-7-ville.syrjala@linux.intel.com
|
|
Now that the GGTT PTE updates go straight to GSMBASE (bypassing
GTTMMADR) there should be no more risk of system hangs? So the
"binder" (ie. update the PTEs via MI_UPDATE_GTT) is no longer
necessary, disable it.
My main worry with the MI_UPDATE_GTT are:
- only used on this one platform so very limited testing coverage
- async so more opprtunities to screw things up
- what happens if the engine hangs while we're waiting for MI_UPDATE_GTT
to finish?
- requires working command submission, so even getting a working
display now depends on a lot more extra components working correctly
TODO: MI_UPDATE_GTT might be interesting as an optimization
though, so perhaps someone should look into always using it
(assuming the GPU is alive and well)?
v2: Keep using MI_UPDATE_GTT on VM guests
v3: use i915_direct_stolen_access()
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-6-ville.syrjala@linux.intel.com
|
|
On MTL accessing stolen memory via the BARs is somehow borked,
and it can hang the machine. As a workaround let's bypass the
BARs and just go straight to DSMBASE/GSMBASE instead.
Note that on every other platform this itself would hang the
machine, but on MTL the system firmware is expected to relax
the access permission guarding stolen memory to enable this
workaround, and thus direct CPU accesses should be fine.
The raw stolen memory areas won't be passed to VMs so we'll
need to risk using the BAR there for the initial setup. Once
command submission is up we should switch to MI_UPDATE_GTT
which at least shouldn't hang the whole machine.
v2: Don't use direct GSM/DSM access on guests
Add w/a number
v3: Check register 0x138914 to see if pcode did its job
Add some debug prints
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-5-ville.syrjala@linux.intel.com
|
|
Now that intel_memory_regions_hw_probe() prints out each and every
memory region there's no reason to have ad-hoc debugs to do similar
things elsewhere.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-4-ville.syrjala@linux.intel.com
|
|
mem->region is a struct resource, but mem->io_start and
mem->io_size are not for whatever reason. Let's unify this
and convert the io stuff into a struct resource as well.
Should make life a little less annoying when you don't have
juggle between two different approaches all the time.
Mostly done using cocci (with manual tweaks at all the
places where we mutate io_size by hand):
@@
struct intel_memory_region *M;
expression START, SIZE;
@@
- M->io_start = START;
- M->io_size = SIZE;
+ M->io = DEFINE_RES_MEM(START, SIZE);
@@
struct intel_memory_region *M;
@@
- M->io_start
+ M->io.start
@@
struct intel_memory_region M;
@@
- M.io_start
+ M.io.start
@@
expression M;
@@
- M->io_size
+ resource_size(&M->io)
@@
expression M;
@@
- M.io_size
+ resource_size(&M.io)
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Tested-by: Paz Zcharya <pazz@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202224340.30647-2-ville.syrjala@linux.intel.com
|
|
The sysfs file is named 'enabled', thus users might want to know the
true state of the RC6 instead of only the indication if the RC6
should be enabled.
Let's use rc6.enable directly instead of rc6.supported.
Signed-off-by: Juan Escamilla <jcescami@wasd.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116172922.3460695-1-jcescami@wasd.net
|
|
Some of our existing Xe_LPG workarounds and tuning are also applicable
to the version 12.74 variant. Extend the condition bounds accordingly.
Also fix the comment on Wa_14018575942 while we're at it.
v2: Extend some more workarounds (Harish)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-4-haridhar.kalvala@intel.com
|
|
Xe_LPG+ (IP version 12.74) should take the same general code
paths as Xe_LPG (versions 12.70 and 12.71).
Xe_LPG+'s workaround list will be handled by the next patch.
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108122738.14399-3-haridhar.kalvala@intel.com
|
|
Currently if rc6 is supported, it gets enabled and the sysfs files for
rc6_enable_show and rc6_enable_dev_show uses masks to check information
from drm_i915_private.
However rc6_support functions take more variables and conditions into
consideration and thus these masks are not enough for most of the modern
hardware and it is simpley lyting to the user.
Let's fix it by at least use the rc6.supported flag from intel_gt
information.
Signed-off-by: Juan Escamilla <jcescami@wasd.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110010302.553597-1-jcescami@wasd.net
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fad3e2107503e99cfe9cc0c9cba19dad)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc'
Also add missing field member descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228234946.12405-1-rdunlap@infradead.org
(cherry picked from commit cd1d91115ff1929ec346d85f512ef260ddf8131e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Eliminate use of kmap_atomic() in i915 (Zhao)
- Add Wa_14019877138 for DG2 (Haridhar)
- Static checker and spelling fixes (Colin, Karthik, Randy)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXxCibZZQqlqhDN3@jlahtine-mobl.ger.corp.intel.com
|
|
Avoid the following lockdep complaint:
<4> [298.856498] ======================================================
<4> [298.856500] WARNING: possible circular locking dependency detected
<4> [298.856503] 6.7.0-rc5-CI_DRM_14017-g58ac4ffc75b6+ #1 Tainted: G
N
<4> [298.856505] ------------------------------------------------------
<4> [298.856507] kworker/4:1H/190 is trying to acquire lock:
<4> [298.856509] ffff8881103e9978 (>->reset.backoff_srcu){++++}-{0:0}, at:
_intel_gt_reset_lock+0x35/0x380 [i915]
<4> [298.856661]
but task is already holding lock:
<4> [298.856663] ffffc900013f7e58
((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at:
process_scheduled_works+0x264/0x530
<4> [298.856671]
which lock already depends on the new lock.
The complaint is not actually valid. The busyness worker thread does
indeed hold the worker lock and then attempt to acquire the reset lock
(which may have happened in reverse order elsewhere). However, it does
so with a trylock that exits if the reset lock is not available
(specifically to prevent this and other similar deadlocks).
Unfortunately, lockdep does not understand the trylock semantics (the
lock is an i915 specific custom implementation for resets).
Not doing a synchronous flush of the worker thread when a reset is in
progress resolves the lockdep splat by never even attempting to grab
the lock in this particular scenario.
There are situatons where a synchronous cancel is required, however.
So, always do the synchronous cancel if not in reset. And add an extra
synchronous cancel to the end of the reset flow to account for when a
reset is occurring at driver shutdown and the cancel is no longer
synchronous but could lead to unallocated memory accesses if the
worker is not stopped.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219195957.212600-1-John.C.Harrison@Intel.com
|
|
If we are at the end of suspend or very early in resume
its possible an async fence signal (via rcu_call) is triggered
to free_engines which could lead us to the execution of
the context destruction worker (after a prior worker flush).
Thus, when suspending, insert rcu_barriers at the start
of i915_gem_suspend (part of driver's suspend prepare) and
again in i915_gem_suspend_late so that all such cases have
completed and context destruction list isn't missing anything.
In destroyed_worker_func, close the race against CT-loss
by checking that CT is enabled before calling into
deregister_destroyed_contexts.
Based on testing, guc_lrc_desc_unpin may still race and fail
as we traverse the GuC's context-destroy list because the
CT could be disabled right before calling GuC's CT send function.
We've witnessed this race condition once every ~6000-8000
suspend-resume cycles while ensuring workloads that render
something onscreen is continuously started just before
we suspend (and the workload is small enough to complete
and trigger the queued engine/context free-up either very
late in suspend or very early in resume).
In such a case, we need to unroll the entire process because
guc-lrc-unpin takes a gt wakeref which only gets released in
the G2H IRQ reply that never comes through in this corner
case. Without the unroll, the taken wakeref is leaked and will
cascade into a kernel hang later at the tail end of suspend in
this function:
intel_wakeref_wait_for_idle(>->wakeref)
(called by) - intel_gt_pm_wait_for_idle
(called by) - wait_for_suspend
Thus, do an unroll in guc_lrc_desc_unpin and deregister_destroyed_-
contexts if guc_lrc_desc_unpin fails due to CT send falure.
When unrolling, keep the context in the GuC's destroy-list so
it can get picked up on the next destroy worker invocation
(if suspend aborted) or get fully purged as part of a GuC
sanitization (end of suspend) or a reset flow.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229215143.581619-1-alan.previn.teres.alexis@intel.com
|
|
When suspending, flush the context-guc-id
deregistration worker at the final stages of
intel_gt_suspend_late when we finally call gt_sanitize
that eventually leads down to __uc_sanitize so that
the deregistration worker doesn't fire off later as
we reset the GuC microcontroller.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228045558.536585-2-alan.previn.teres.alexis@intel.com
|
|
A failure to load the HuC is occasionally observed where the cause is
believed to be a low GT frequency leading to very long load times.
So a) increase the timeout so that the user still gets a working
system even in the case of slow load. And b) report the frequency
during the load to see if that is the cause of the slow down.
Also update the similar code on the GuC load to not use uncore->gt
when there is a local gt available. The two should match, but no need
for unnecessary de-referencing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102222202.310495-1-John.C.Harrison@Intel.com
|
|
WA 14019877138 needed for Graphics 12.70/71 both
V2(Jani):
- Use drm/i915
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103053111.763172-1-tejas.upadhyay@intel.com
|
|
Some of the wa registers are MCR register, and EU_PERF_CNTL registers
are MCR register.
MCR register needs extra process for read/write.
As normal MMIO register also could work with the MCR register process,
change all wa registers to MCR type for code simplicity.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102010231.843778-1-shuicheng.lin@intel.com
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc'
Also add missing field member descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228234946.12405-1-rdunlap@infradead.org
|
|
The use of kmap_atomic() is being deprecated in favor of
kmap_local_page()[1], and this patch converts the call from
kmap_atomic() to kmap_local_page().
The main difference between atomic and local mappings is that local
mappings doesn't disable page faults or preemption (the preemption is
disabled for !PREEMPT_RT case, otherwise it only disables migration).
With kmap_local_page(), we can avoid the often unwanted side effect of
unnecessary page faults or preemption disables.
In drm/i915/gt/uc/intel_us_fw.c, the function intel_uc_fw_copy_rsa()
just use the mapping to do memory copy so it doesn't need to disable
pagefaults and preemption for mapping. Thus the local mapping without
atomic context (not disable pagefaults / preemption) is enough.
Therefore, intel_uc_fw_copy_rsa() is a function where the use of
memcpy_from_page() with kmap_local_page() in place of memcpy() with
kmap_atomic() is correctly suited.
Convert the calls of memcpy() with kmap_atomic() / kunmap_atomic() to
memcpy_from_page() which uses local mapping to copy.
[1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/T/#u
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203132947.2328805-8-zhao1.liu@linux.intel.com
|
|
Enable Force Dispatch Ends Collection for DG2.
BSpec: 46001
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213064612.480032-1-haridhar.kalvala@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- drm/i915: Implement fdinfo memory stats printing
Use the newly added drm_print_memory_stats helper to show memory
utilisation of our objects in drm/driver specific fdinfo output.
To collect the stats we walk the per memory regions object lists
and accumulate object size into the respective drm_memory_stats
categories.
Cross-subsystem Changes:
- Backmerge of drm-next (to bring drm-intel-next for PXP changes)
Driver Changes:
- Wa_18028616096 now applies to all DG2 (Matt R)
- Drop Wa_22014600077 on all DG2 (Matt R)
- Add new ATS-M device ID (Haridhar)
- More Meteorlake (MTL) workarounds (Matt R, Dnyaneshwar, Jonathan,
Gustavo, Radhakrishna)
- PMU WARN_ON cleanup on driver unbind (Umesh)
- Limit GGTT WC flushing workaround to pre BXT/ICL platforms
- Complement implementation for Wa_16018031267 / Wa_16018063123
(Andrzej, Jonathan, Nirmoy, Chris)
- Properly print internal GSC engine in trace logs (Tvrtko)
- Track gt pm wakerefs (Andrzej)
- Fix null deref bugs on perf code when perf is disabled (Harshit,
Tvrtko)
- Fix __i915_request_create memory leak on driver unbind (Andrzej)
- Remove spurious unsupported HuC message on MTL (Daniele)
- Read a shadowed mmio register for ggtt flush (Vinay)
- Add missing new-line to GT_TRACE (Andrzej)
- Add drm_dbgs for critical PXP events (Alan)
- Skip pxp init if gt is wedged (Zhanjun)
- Replace custom intel runtime_pm tracker with ref_tracker library
(Andrzej)
- Compiler warning/static checker/coding style cleanups (Arnd, Nirmoy,
Soumya, Gilbert, Dorcas, Kunwu, Sam, Tvrtko)
- Code structure and helper cleanups (Jani, Tvrtko, Andi)
- Selftest improvements (John, Tvrtko, Andrzej)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_gt_mcr.c
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZXNBcsSwJEVsq9On@jlahtine-mobl.ger.corp.intel.com
|