summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_lvds.c
AgeCommit message (Collapse)Author
2023-06-02drm/i915/lvds: switch to drm_edid_read_switcheroo()Jani Nikula
Use drm_edid_read_switcheroo() to switch from struct edid to struct drm_edid. Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/429cd6f23366cb4cace4fa13cf92ad068aca64dd.1685437501.git.jani.nikula@intel.com
2023-05-05drm/i915/display: Add new member to configure PCON color conversionAnkit Nautiyal
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch adds new member to crtc_state to represent the final output_format to the sink. In case of a DFP this can be different than the output_format, as per the format conversion done via the PCON. This will help to store only the format conversion capabilities of the DP device in intel_dp->dfp, and use crtc_state to compute and store the configuration for color/format conversion for a given mode. v2: modified the new member to crtc_state to represent the final output_format that eaches the sink, after possible conversion by PCON kind of devices. (Ville) v3: Addressed comments from Ville: -Added comments to clarify difference between sink_format and output_format. -Corrected the order of setting sink_format and output_format. -Added readout for sink_format in get_pipe_config hooks. v4: Set sink_format for intel_sdvo too. (Ville) v5: Rebased. v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville) v7: Fix the condition to set sink_format for HDMI. Set hdmi output_format simply as sink_format. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
2023-04-20drm/i915: Namespace pfit registers properlyVille Syrjälä
Give the PFIT_CONTROL bits a consistent namespace. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-03-30drm/i915/pps: split out PPS regs to a separate fileJani Nikula
Clean up i915_reg.h by splitting out PPS regs to display/intel_pps_regs.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/80d66ee6d7e56153a0ab25640ac2dad239b1ef6e.1678973282.git.jani.nikula@intel.com
2023-02-17drm/i915: s/PIPECONF/TRANSCONF/Ville Syrjälä
Rename PIPECONF to TRANSCONF to make it clear what it actually applies to. While the usual convention is to pick the earliers name I think in this case it's more clear to use the later name. Especially as even the register offset is in the wrong range (0x70000 vs. 0x60000) and thus makes it look like this is per-pipe. There is one place in gvt that's doing something with TRANSCONF while iterating with for_each_pipe(). So that might not be doing the right thing for TRANSCODER_EDP, dunno. Not knowing what it does I left it as is to avoid breakage. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: s/pipe_config/crtc_state/Ville Syrjälä
Call the crtc state 'crtc_state' rather than 'pipe_config', as is the modern style. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: s/intel_encoder/encoder/ etc.Ville Syrjälä
Get rid of some of the annoying aliasing drm_ vs. intel_ encoder/connector variables. Just prefer the intel_ types. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: s/dev_priv/i915/Ville Syrjälä
Do the customary s/dev_priv/i915/ rename and aliasing 'dev' pointer removal. Though various register definitions still depend on the magic 'dev_priv' variable so not a 100% conversion. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Fix whitespaceVille Syrjälä
Replace some stray spaces with tabs. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Extract intel_lvds_regs.hVille Syrjälä
Extract the integrated LVDS port register definitions into their own header file. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Use REG_BIT() & co.Ville Syrjälä
Use REG_BIT() & co. for the LVDS port register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Use intel_de_rmw()Ville Syrjälä
Replace the hand rolled rmw stuff with intel_de_rmw(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/lvds: Split long linesVille Syrjälä
Split some overly long lines. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-26drm/i915/panel: move panel fixed EDID to struct intel_panelJani Nikula
It's a bit confusing to have two cached EDIDs in struct intel_connector with slightly different purposes. Make the distinction a bit clearer by moving the EDID cached for eDP and LVDS panels at connector init time to struct intel_panel, and name it fixed_edid. That's what it is, a fixed EDID for the panels. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/328350ef918638928a8286cdbab3107c8258332d.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/bios: convert intel_bios_init_panel() to drm_edidJani Nikula
Try to use struct drm_edid where possible, even if having to fall back to looking into struct edid down low via drm_edid_raw(). v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/897807d62f74f690a173ecd405e25c6ccdd63b98.1674643465.git.jani.nikula@intel.com
2023-01-26drm/i915/edid: convert DP, HDMI and LVDS to drm_edidJani Nikula
Convert all the connectors that use cached connector edid and detect_edid to drm_edid. Since drm_get_edid() calls drm_connector_update_edid_property() while drm_edid_read*() do not, we need to call drm_edid_connector_update() separately, in part due to the EDID caching behaviour in HDMI and DP. Especially DP depends on the details parsed from EDID. (The big behavioural change conflating EDID reading with parsing and property update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")) v6: Rebase on drm_edid_connector_add_modes() v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>) v4: Call drm_edid_connector_update() after reading HDMI/DP EDID v3: Don't leak vga switcheroo EDID in LVDS init (Ville) v2: Don't leak opregion fallback EDID (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
2022-12-09drm/i915: Do panel VBT init early if the VBT declares an explicit panel typeVille Syrjälä
Lots of ADL machines out there with bogus VBTs that declare two eDP child devices. In order for those to work we need to figure out which power sequencer to use before we try the EDID read. So let's do the panel VBT init early if we can, falling back to the post-EDID init otherwise. The post-EDID init panel_type=0xff approach of assuming the power sequencer should already be enabled doesn't really work with multiple eDP panels, and currently we just end up using the same power sequencer for both eDP ports, which at least confuses the wakeref tracking, and potentially also causes us to toggle the VDD for the panel when we should not. Cc: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221125173156.31689-3-ville.syrjala@linux.intel.com
2022-11-11drm/i915: stop including i915_irq.h from i915_trace.hJani Nikula
Turns out many of the files that need i915_reg.h get it implicitly via {display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h -> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h, makes sense to drop it, but that requires adding quite a few new includes all over the place. Prefer including i915_reg.h where needed instead of adding another implicit include, because eventually we'll want to split up i915_reg.h and only include the specific registers at each place. Also some places actually needed i915_irq.h too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
2022-10-11drm/i915/display: remove drm_device aliasesAndrzej Hajda
drm_device pointers are unwelcome. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221006204844.2831303-1-andrzej.hajda@intel.com
2022-09-28drm/i915: Allow alternate fixed modes always for LVDSVille Syrjälä
As with eDP let's stop considering the VBTs DRRS knobs and just always accept all otherwise suitable EDID modes. This appears to be how Windows does it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-09-28drm/i915: Simplify intel_panel_add_edid_alt_fixed_modes()Ville Syrjälä
Since commit a5810f551d0a ("drm/i915: Allow more varied alternate fixed modes for panels") intel_panel_add_edid_alt_fixed_modes() no longer considers vrr vs. drrs separately. So no reason to pass them as separate parameters either. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-09-26drm/i915: Clean up connector->*_allowed setupVille Syrjälä
All the connectors are zero initialized so no need to clear the *_allowed flags we don't support. Only leave the ones we want to set. And while at it switch to booleans instead of ints. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-13-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-09-26drm/i915: Extract intel_attach_scaling_mode_property()Ville Syrjälä
Consolidate the scaling_mode property setup into a single place. The one slight complicateion here is that GMCH platforms can't do the CENTER mode except on the LVDS port. But we can deal with that by just checking the connector type. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-09-26drm/i915: Extract intel_lvds_add_properties()Ville Syrjälä
Move the LVDS connector property setup to a dedicated function to depollute intel_lvds_init() a bit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-09-26drm/i915: Pass intel_encoder to to_lvds_encoder()Ville Syrjälä
Most of our encoder type cast stuff already operates on intel_encoder rather than drm_encoder. Switch to_lvds_encoder() over as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220912111814.17466-6-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-08-31drm/i915: move vbt to display.vbtJani Nikula
Move display VBT related members under drm_i915_private display sub-struct. v2: Rebase Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/db4b648b201ea0b79654fec2028120999a735db0.1661779055.git.jani.nikula@intel.com
2022-06-20drm/i915/bios: calculate panel type as per child device index in VBTAnimesh Manna
Each LFP may have different panel type which is stored in LFP data data block. Based on the child device index respective panel-type/ panel-type2 field will be used. v1: Initial rfc verion. v2: Based on review comments from Jani, - Used panel-type instead addition panel-index variable. - DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_* macro. v3: - passing intel_bios_encoder_data as argument of intel_bios_init_panel(). Passing NULL to indicate encoder is not initialized yet for dsi as current focus is to enable dual EDP. [Jani] v4: - encoder->devdata used which is initialized before from vbt structure. [Jani] Signed-off-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com
2022-06-01drm/i915: Accept more fixed modes with VRR panelsVille Syrjälä
It seem that when dealing with VRR capable eDP panels we need to accept fixed modes with variable vblank length (which is what VRR varies dynamically). Typically the preferred mode seems to be a non-VRR more (lowish dotclock/refresh rate + short vblank). We also have examples where it looks like even the hblank length is a bit different between the preferred mode vs. VRR mode(s). So let's just accept anything that has matching hdisp+vdisp+flags. v2: Document that is_alt_drrs_mode() is a subset of is_alt_vrr_mode() (Jani) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/125 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220531191844.11313-4-ville.syrjala@linux.intel.com
2022-05-27drm/i915/bios: Determine panel type via PNPID matchVille Syrjälä
Apparently when the VBT panel_type==0xff we should trawl through the PNPID table and check for a match against the EDID. If a match is found the index gives us the panel_type. Tried to match the Windows behaviour here with first looking for an exact match, and if one isn't found we fall back to looking for a match w/o the mfg year/week. v2: Rebase due to vlv_dsi changes v3: Adjust to .get_panel_type() vfunc Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5545 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-14-ville.syrjala@linux.intel.com
2022-05-27drm/i915/bios: Split VBT data into per-panel vs. global partsVille Syrjälä
Move the panel specific VBT parsing to happen during the output probing stage. Needs to be done because the VBT parsing will need to look at the EDID to determine the correct panel_type on some machines. We split the parsed VBT data (i915->vbt) along the same boundary. For the moment we just hoist all the panel specific stuff into connector->panel.vbt since that seems like the most convenient place for eg. the backlight code. Note that we simply drop the drrs type check from intel_drrs_frontbuffer_update() since that operates on the whole device rather than a specific connector/encoder. But the check was just a micro optimization so removing it doesn't actually mattter for correctness. TODO: Lot's of cleanup to be done in the future. Eg. most of the DSI stuff could probably be eliminated entirely and just parsed on demand during DSI init. v2: Note the intel_drrs_frontbuffer_update() change Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220510104242.6099-13-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-31drm/i915: Allow static DRRS on LVDSVille Syrjälä
Nothing special about static DRRS on LVDS, it's just your bog standard modeset. Let's allow it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-31drm/i915: Combine the EDID fixed_mode+downclock_mode lookup into oneVille Syrjälä
The intel_panel_add_edid_fixed_mode() vs. intel_panel_add_edid_downclock_mode() split is not really helpful. Let's just roll those into a single function so that the connector init code doesn't have to care too much about this. All we need to know is whether DRRS should be allowed or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-31drm/i915: Put fixed modes directly onto the panel's fixed_modes listVille Syrjälä
Rather than having the connector init get the fixed mode back from intel_panel and then feed it straight back into intel_panel_init() let's just make the fixed mode lookup put the mode directly onto the panel's fixed_modes list. Avoids the pointless round trip and opens the door for further enhancements to the fixed mode handling. v2: Make the debug message correct by using intel_panel_drrs_type() (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Extract intel_panel_encoder_fixed_mode()Ville Syrjälä
Apart from the EDID and VBT based mechanism we also sometimes use the encoder's current mode as the panel fixed mode. We currently have the same code for that duplicated in two places. Let's unify. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Rename intel_panel_vbt_fixed_mode()Ville Syrjälä
Rename intel_panel_vbt_fixed_mode() to intel_panel_vbt_lfp_fixed_mode() to be more descriptive. We'll have another VBT fixed mode function soon and we don't want to confuse the two. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Use intel_panel_preferred_fixed_mode() moreVille Syrjälä
Use intel_panel_preferred_fixed_mode() for all the orientation quirk setup and compute_is_dual_link_lvds()). All of these happen after intel_panel_init() so the panel fixed_mode list is already in place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Use DRM_MODE_FMT+DRM_MODE_ARG()Ville Syrjälä
Replace all drm_mode_debug_printmodeline() calls with DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more terse in places where we previously had a newline in the precedeing drm_dbg_kms(), and avoids anything else sneaking in between the two printk()s in all cases. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Pass intel_connector to intel_panel_{init,fini}()Ville Syrjälä
All the other intel_panel functions take struct intel_connector, so might as well make init()/fini() take one as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915: Introduce intel_panel_get_modes()Ville Syrjälä
Several connectors want to return the fixed_mode from .get_modes(), add a helper to do that (and hide the details inside intel_panel.c). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915: Introduce intel_panel_{fixed,downclock}_mode()Ville Syrjälä
Abstract away the details on where we store the fixed/downclock modes, and also how we select them. Will be useful for static DRRS (aka. allowing the user to select the refresh rate for the panel). We pass in the user requested mode to intel_panel_fixed_mode() so that in the future it may try to match the refresh rate. And intel_panel_downclock_mode() gets passed the adjusted_mode we actually chose to use so that it may find a suitable lower resresh rate variant. v2: Hook it up for all encoders s/fixed_mode/adjusted_mode/ in intel_panel_downclock_mode() (Jani) Elaborate on the choice or arguments for the functions (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915/lvds: Pass fixed_mode to compute_is_dual_link_lvds()Ville Syrjälä
We want to eventually get rid of the connector->panel.fixed_mode pointer so avoid using it during LVDS setup. Since this all happens during the encoder init we already have the fixed_mode around, just pass that in. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-10-01drm/i915/dpll: move dpll modeset asserts to intel_dpll.cJani Nikula
Keep the functionality and the assert code together. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0229659fb8af6c91c774408c6f7bb8c4ff8735e3.1632992608.git.jani.nikula@intel.com
2021-10-01drm/i915/fdi: move fdi modeset asserts to intel_fdi.cJani Nikula
Keep the functionality and the assert code together. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/427d27eb4e5daca208d496d6c2ffc91ed90ba714.1632992608.git.jani.nikula@intel.com
2021-09-30drm/i915: Introduce intel_panel_compute_config()Ville Syrjälä
Let's introduce a compute_config() helper for fixed mode panels. For now all it does is the fixed_mode->adjusted_mode copy. Note that with sDVO we have to ask the external encoder chip to spit out our actual display timings for us, so the fixed_mode to adjusted_mode copy done by intel_panel_compute_config() is redundant, but we still want to use it to do other checks for us later. We'll be fine so long as we only call it before intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode with the timings from the encoder. v2: Use intel_panel_compute_config() with sDVO Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30drm/i915: Use intel_panel_mode_valid() for DSI/LVDS/(s)DVOVille Syrjälä
All fixed mode panels should behave the same way when it comes to mode filtering. Reuse the intel_panel_mode_valid() for all of them. This changes the behaviour to match what we do for eDP, ie. reject anything that doesn't exactly match the fixed mode dimensions. Users can still manually provide different sized modes which will be handled by the panel fitter just as before. The difference is that we can no longer report funny modes in the connector's mode list. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-08-26drm/i915/panel: mass rename functions to have intel_panel_ prefixJani Nikula
Follow the usual naming conventions. Also pull HAS_GMCH() check to intel_panel_fitting(). No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9ff6e42e377bdb0c9349f50d9ea79671059633c7.1629888677.git.jani.nikula@intel.com
2021-08-26drm/i915/backlight: mass rename functions to have intel_backlight_ prefixJani Nikula
Follow the usual naming conventions. As a drive-by cleanup, also pass intel_connector instead of drm_connector to intel_backlight_setup(). No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ea1c22370210abdd4f5547af73c71b902061ea50.1629888677.git.jani.nikula@intel.com
2021-08-26drm/i915/backlight: extract backlight code to a separate fileJani Nikula
In a long overdue refactoring, split out backlight code to new intel_backlight.[ch]. Simple code movement, leave renames for follow-up work. No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/97d310848f03061473b9b2328e2c5c4dcf263cfa.1629888677.git.jani.nikula@intel.com
2021-06-24drm/i915: s/intel_crtc/crtc/Ville Syrjälä
Clear out the straggler 'intel_crtc' variables. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-05-05drm/i915: Don't include intel_de.h from intel_display_types.hVille Syrjälä
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 17:54:52 +0000