summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_hdmi.c
AgeCommit message (Collapse)Author
2024-02-26drm/i915/hdcp: Rename hdcp capable functionsSuraj Kandpal
Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability and hdcp_2_2_get_capability to properly reflect what these functions are doing. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com
2024-01-08drm/i915: Disable hotplug detection handlers during driver init/shutdownImre Deak
As described in the previous two patches an unexpected connector detection can happen during the init/shutdown sequences. Prevent these by returning the connector's current status from the detection handlers. Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-10-imre.deak@intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com>
2024-01-08drm/i915: Init DRM connector polled field earlyImre Deak
After an HPD IRQ storm on a connector intel_hpd_irq_storm_detect() will set the connector's HPD pin state to HPD_MARK_DISABLED and the IRQ gets disabled. Subsequently intel_hpd_irq_storm_switch_to_polling() will enable polling for these connectors, setting the pin state to HPD_DISABLED, but only if the connector's base.polled field is set to DRM_CONNECTOR_POLL_HPD. intel_hpd_irq_storm_reenable_work() will reenable the IRQ - after 2 minutes - if the pin state is HPD_DISABLED. The connectors will be created with their base.polled field set to 0, which gets initialized only later in i915_hpd_poll_init_work() (using intel_connector::polled). If a storm is detected on a connector after it's created and IRQs are enabled on it - by intel_hpd_init() - and before its bease.polled field is initialized in the above work, the connector's HPD pin will stay in the HPD_MARK_DISABLED state - leaving the IRQ disabled indefinitely - and polling will not get enabled on it as intended. I can't see a reason for initializing base.polled in a delayed manner, so do this already when creating the connector, to prevent the above race condition. Link: https://patchwork.freedesktop.org/patch/msgid/20240104083008.2715733-2-imre.deak@intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com>
2023-12-22drm/i915/display: Take care of VSC select field in video dip ctl registerJouni Högander
We need to configure VSC Select field in video dip ctl if we want to have e.g. colorimetry date in our VSC SDP. Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Shawn Lee <shawn.c.lee@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231220103609.1384523-8-jouni.hogander@intel.com
2023-11-29drm/i915: Skip some timing checks on BXT/GLK DSI transcodersVille Syrjälä
Apparently some BXT/GLK systems have DSI panels whose timings don't agree with the normal cpu transcoder hblank>=32 limitation. This is perhaps fine as there are no specific hblank/etc. limits listed for the BXT/GLK DSI transcoders. Move those checks out from the global intel_mode_valid() into into connector specific .mode_valid() hooks, skipping BXT/GLK DSI connectors. We'll leave the basic [hv]display/[hv]total checks in intel_mode_valid() as those seem like sensible upper limits regardless of the transcoder used. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720 Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-31drm/i915: Move the g45 PEG band gap HPD workaround to the HPD codeVille Syrjälä
We are asked to reprogram PEG_BAND_GAP_DATA prior to enabling hotplug detection on the g45 HDMI/DP ports. Currently we do said reprogamming from the DP/HDMI connector initialization functions. That code should be mostly platform agnostic so clearly not the best place for this. Move the workaround to the place where we actually enable HPD detection. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012124033.26983-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-04drm/i915: convert INTEL_DISPLAY_ENABLED() into a functionJani Nikula
There's no need for this to be a macro. Add some documentation too. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/480b9b697b2ffa0c8677115bd443ba633801c6c1.1696336887.git.jani.nikula@intel.com
2023-09-15drm/i915/hdmi: Remove old i2c symlinkVille Syrjälä
Remove the i915 specific i2c-N symlink from HDMI connectors. This was added to sort of mirror the DP connectors that alreayd had their aux ch based i2c adapter sitting beneath them in the sysfs hierarchy. But now that we have the standard "ddc" symlink approach provided by the core let's switch to that fully. I don't think anything beyond igt depends on this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/hdmi: Nuke hdmi->ddc_busVille Syrjälä
Remove the mostly redundant hdmi->ddc_bus. The only thing that needs it anymore is get_encoder_by_ddc_bus(), but that can be replaced with a slight detour through attached_connector+intel_gmbus_get_adapter(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-11-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915/hdmi: Use connector->ddc everwhereVille Syrjälä
We already populate connector->ddc for HDMI ports, but so far we've not taken full advantage of it. Do that by eliminating a bunch of intel_gmbus_get_adapter() lookups. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915: Call the DDC bus i2c adapter "ddc"Ville Syrjälä
Rename the various names we've used for the DDC bus i2c adapter ("i2c", "adapter", etc.) to just "ddc". This differentiates it from the various other i2c busses we might have (DSI panel stuff, DVO control bus, etc.). v2: Don't add a bogus drm_get_edid() call (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
2023-09-01drm/i915/cec: switch to setting physical address directlyJani Nikula
Avoid parsing the EDID again for source physical address. Also gets rids of a few remaining raw EDID usages. Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: linux-media@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/01a90c82c8a4f2fd945e0181ffeaca595928d19e.1692884619.git.jani.nikula@intel.com
2023-09-01drm/i915/display: use drm_edid_is_digital()Jani Nikula
Reduce the use of struct edid and drm_edid_raw(). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dbc0269d34f3140aff410eefae8a2711c59299b3.1692884619.git.jani.nikula@intel.com
2023-09-01drm/i915/hdcp: Use intel_connector as argument for hdcp_2_2_capableSuraj Kandpal
Use intel_connector as argument instead of intel_digital_port in hdcp_2_2_capable function and dig_port can be later derived from connector. This will help with getting the correct hdcp version of particular monitor in a MST setup. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230830073437.666263-2-suraj.kandpal@intel.com
2023-08-29drm/i915/hdcp: Use intel_connector argument in intel_hdcp_shimSuraj Kandpal
Update intel_hdcp_shim funcs specifically read_2_2_message, write_2_2_message and config_stream_type to use intel_connector argument instead of intel_digital_port as this will help in getting correct aux later for dp mst scenarios also already hdcp funcs derive digital_port from connector and then many funcs again get back the connector from dig_port which doesn't seem right. Connector specific hdcp functions can derive dig_port on need basis. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230828063401.600414-2-suraj.kandpal@intel.com
2023-08-11drm/i915: Avoid endless HPD poll detect loop via runtime suspend/resumeImre Deak
The issue fixed in commit a8ddac7c9f06 ("drm/i915: Avoid HPD poll detect triggering a new detect cycle") on VLV, CHV is still present on platforms where the display hotplug detection functionality is available whenever the device is in D0 state (hence these platforms switch to HPD polling only when the device is runtime suspended). The above commit avoids an endless i915_hpd_poll_init_work() -> connector detect loop by making sure that by the end of i915_hpd_poll_init_work() all display power references acquired by the connector detect functions which can trigger a new cycle (display core power domain) are dropped. However on platforms where HPD polling is enabled/disabled only from the runtime suspend/resume handlers, this is not ensured: for instance eDP VDD, TypeC port PHYs and the runtime autosuspend delay may still keep the device runtime resumed (via a power reference acquired during connector detection and hence result in an endless loop like the above). Solve the problem described in the above commit on all platforms, by making sure that a i915_hpd_poll_init_work() -> connector detect sequence can't take any power reference in the first place which would trigger a new cycle, instead of relying on these power references to be dropped by the end of the sequence. With the default runtime autosuspend delay (10 sec) this issue didn't happen in practice, since the device remained runtime resumed for the whole duration of the above sequence. CI/IGT tests however set the autosuspend delay to 0, which makes the problem visible, see References: below. Tested on GLK, CHV. v2: Don't warn about a requeued work, to account for disabling polling directly during driver loading, reset and system resume. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7940#note_1997403 Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230809104307.1218058-1-imre.deak@intel.com
2023-08-07drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform definesDnyaneshwar Bhadane
Follow consistent naming convention. Replace JSL with JASPERLAKE. Unroll IS_JSL_EHL() define with IS_JASPERLAKE() || IS_ELKHARTLAKE() condition. Change in the display step define for Jasperlake. v2: - Change subject prefix skl instead of SKL(Anusha) v3: - Remove the use of define IS_JSL_EHL. - Replace with IS_JASPERLAKE() || IS_ELKHARTLAKE() - Unrolled wrapper IS_JSL_ELK_DISPLAY_STEP (Jani/Tvrtko) v4: - Removed unused macro v5: - Resolved valid checkpatch warning(Jani) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-9-dnyaneshwar.bhadane@intel.com
2023-07-06drm/i915: Remove DDC pin sanitationVille Syrjälä
Stop with the VBT DDC pin sanitation, and instead just check that the appropriate DDC pin is still available when initializing a HDMI connector. The reason being that we want to start initializing ports in VBT order to deal with VBTs that declare child devices with seemingly conflicting ports. As the encoder initialization can fail for other reasons (at least for eDP+AUX) we can't know upfront which way the conflicts should be resolved. Note that the old way of sanitizing gave priority to the last port declared in the VBT, but now we sort of do the opposite by favoring the first encoder to successfully initialize. So far we're not aware of HDMI/DDC use cases where this would matter but for AUX CH (will be subject to a similar change) there are known cases where it matters. Also note that the old code fell back to the platform default DDC pin if the VBT pin was populated but invalid. That doesn't seem like such a great idea because the VBT might have later declared another port using that platform default pin, and so we might just be creating more DDC pin conflicts here. So lets not second guess the VBT and simply reject the entire HDMI encoder if the VBT DDC pin is invalid. v2: Pimp the commit message (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-06-02drm/i915/hdmi: stop caching has_hdmi_sink in struct intel_hdmiJani Nikula
Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cdb4731260b062c0f0ad2f8b64195c9a57bcb76.1685437500.git.jani.nikula@intel.com
2023-06-02drm/i915/hdmi: stop caching has_audio in struct intel_hdmiJani Nikula
Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/710286536d6b07ba8aa068b65b2b2c0c7743220e.1685437500.git.jani.nikula@intel.com
2023-05-17Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Backmerge to get some hwmon dependencies. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-05-11drm/i915: Nuke intel_bios_is_port_dp_dual_mode()Ville Syrjälä
Now that we have encoder->devdata everwhere we don't need the intel_bios_is_port_dp_dual_mode() wrapper any more. And while at it let's include it in the child device log dump as well since the logic in there is a bit more complex than just DP&&HDMI. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230509160206.25971-3-ville.syrjala@linux.intel.com Acked-by: Gustavo Sousa <gustavo.sousa@intel.com>
2023-05-05drm/i915: Pick one HDMI port for infoframe/audio transmission on g4xVille Syrjälä
On g4x the hardware has only one audio/video DIP block. Thus only one HDMI port can transmit audio/infoframes at a time. Currently we pretend that multiple ports can do it at the same time, but that doesn't actually work for two reasons: - the state of the single hw block will get clobbered by the multiple ports, leading to state checker failures - the hardware will automagically disable audio/infoframe transmission when enabled on multiple ports To fix this let's allow only one of the ports to transmit audio/infoframes at a time. We'll just go over all the HDMI ports and pick the first one that is otherwise capable of audio/infoframes. Further HDMI ports will be treated as if they had a DVI sink connected. In order to compute this consistently we'll also need to always add all HDMI ports to the atomic state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-6-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-05-05drm/i915: Move has_hdmi_sink out from intel_hdmi_compute_config()Ville Syrjälä
We'll be wanting to compute has_hdmi_sink a bit differently for some platforms. To that end compute it in the encoder .compute_config_hook() before we call intel_hdmi_compute_config(). intel_hdmi_compute_has_hdmi_sink() will do the basic lifting beyond any platform specific stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-05-05drm/i915/display: Use sink_format instead of ycbcr420_output flagAnkit Nautiyal
Start passing the sink_format, to all functions that take a bool ycbcr420_output as parameter. This will make the functions generic, and will serve as a slight step towards 4:2:2 support later. v2: Rebased. v3: Correct the checks in places concerned with pipe output. (Ville) Other minor styling and refactoring fixes, as suggested by Ville. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-5-ankit.k.nautiyal@intel.com
2023-05-05drm/i915/display: Add new member to configure PCON color conversionAnkit Nautiyal
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch adds new member to crtc_state to represent the final output_format to the sink. In case of a DFP this can be different than the output_format, as per the format conversion done via the PCON. This will help to store only the format conversion capabilities of the DP device in intel_dp->dfp, and use crtc_state to compute and store the configuration for color/format conversion for a given mode. v2: modified the new member to crtc_state to represent the final output_format that eaches the sink, after possible conversion by PCON kind of devices. (Ville) v3: Addressed comments from Ville: -Added comments to clarify difference between sink_format and output_format. -Corrected the order of setting sink_format and output_format. -Added readout for sink_format in get_pipe_config hooks. v4: Set sink_format for intel_sdvo too. (Ville) v5: Rebased. v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville) v7: Fix the condition to set sink_format for HDMI. Set hdmi output_format simply as sink_format. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
2023-04-28drm/i915/mtl: C20 HW readoutMika Kahola
Create a table for C20 DP1.4, DP2.0 and HDMI2.1 rates. The PLL settings are based on table, not for algorithmic alternative. For DP 1.4 only MPLLB is in use. Once register settings are done, we read back C20 HW state. BSpec: 64568 v2: Updated pll tables (RK) MPLLB selection fix (RK) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-3-mika.kahola@intel.com
2023-04-14drm/i915/mtl: Add C10 phy programming for HDMIRadhakrishna Sripada
Like DG2, we still don't have a proper algorithm that can be used for calculating PHY settings, but we do have tables of register values for a handful of the more common link rates. Some support is better than none, so let's go ahead and add/use these tables when we can, and also add some logic to hdmi_port_clock_valid() to filter the modelist to just the modes we can actually support with these link rates. Hopefully we'll have a proper / non-encumbered algorithm to calculate these registers by the time we upstream and we'll be able to replace this patch with something more general purpose. Bspec: 64568 v2: Rebasing with Clint's HDMI C10 PLL tables (Mika) v3: Remove the extra hdmi clock check pruning. Cc: Imre Deak <imre.deak@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-8-radhakrishna.sripada@intel.com
2023-04-12drm/i915/display: remove unnecessary i915_debugfs.h includesJani Nikula
Leftovers from before display debugfs was separated to its own file. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230411131922.401602-1-jani.nikula@intel.com
2023-04-06drm/scdc-helper: Pimp SCDC debugsVille Syrjälä
Include the device and connector information in the SCDC debugs. Makes it easier to figure out who did what. v2: Rely on connector->ddc (Maxime) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Thierry Reding <treding@nvidia.com>
2023-02-17drm/i915: s/PIPECONF/TRANSCONF/Ville Syrjälä
Rename PIPECONF to TRANSCONF to make it clear what it actually applies to. While the usual convention is to pick the earliers name I think in this case it's more clear to use the later name. Especially as even the register offset is in the wrong range (0x70000 vs. 0x60000) and thus makes it look like this is per-pipe. There is one place in gvt that's doing something with TRANSCONF while iterating with for_each_pipe(). So that might not be doing the right thing for TRANSCODER_EDP, dunno. Not knowing what it does I left it as is to avoid breakage. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-17drm/i915: Pimp encoder ddc_pin/aux_ch debug messagesVille Syrjälä
Use encoder->name rather than port_name() in the debug messages so that they actually make more sense. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216231312.32664-2-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2023-02-16drm/i915: Use encoder->devdata moreVille Syrjälä
Switch a lot of the intel_bios_foo() stuff to just accept the devdata (VBT child device info) directly, instead of taking detours via vbt.ports[]. Also unify the function naming scheme. v2: Drop the redundant "encoder" from the dp/hdmi specific functions Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216000425.32216-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-16drm/i915/display/hdmi: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105131046.2173431-6-andrzej.hajda@intel.com
2023-02-14drm/i915: Replace intel_bios_is_lspcon_present() with ↵Ville Syrjälä
intel_bios_encoder_is_lspcon() We always have encoder->devdata available on the platforms that can have LSPCON. So let's start looking there instead of digging it out from vbt.ports[]. And let's rename the function to fit the common pattern for these things. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208015508.24824-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-01-31drm/i915/hdmi: Go for scrambling only if platform supports TMDS clock > 340MHzAnkit Nautiyal
There are cases, where devices have an HDMI1.4 retimer, and TMDS clock rate is capped to 340MHz via VBT. In such cases scrambling might be supported by the platform and an HDMI2.0 sink for lower TMDS rates, but not supported by the retimer, causing blankouts. So avoid enabling scrambling, if the TMDS clock is capped to <= 340MHz. v2: Added comment, documenting the rationale to check for TMDS clock, before going for scrambling. (Arun) v3: Fixed the function name to check if source supports scrambling. (Jani) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221222040851.3029514-1-ankit.k.nautiyal@intel.com
2023-01-26drm/i915/mtl: Apply Wa_14013475917 for all MTL steppingsJouni Högander
Wa_14013475917 has to be applied for all MTL steppings. Bspec: 66624 Cc: Mika Kahola <mika.kahola@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124102636.2567292-3-jouni.hogander@intel.com
2023-01-26drm/i915/edid: convert DP, HDMI and LVDS to drm_edidJani Nikula
Convert all the connectors that use cached connector edid and detect_edid to drm_edid. Since drm_get_edid() calls drm_connector_update_edid_property() while drm_edid_read*() do not, we need to call drm_edid_connector_update() separately, in part due to the EDID caching behaviour in HDMI and DP. Especially DP depends on the details parsed from EDID. (The big behavioural change conflating EDID reading with parsing and property update was done in commit 5186421cbfe2 ("drm: Introduce epoch counter to drm_connector")) v6: Rebase on drm_edid_connector_add_modes() v5: Fix potential uninitialized var use (kernel test robot <lkp@intel.com>) v4: Call drm_edid_connector_update() after reading HDMI/DP EDID v3: Don't leak vga switcheroo EDID in LVDS init (Ville) v2: Don't leak opregion fallback EDID (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eabb4de932841b38b34cc2818ea9fbf7c10224fd.1674643465.git.jani.nikula@intel.com
2023-01-25drm/i915/audio: Precompute the ELDVille Syrjälä
Stash the ELD into the crtc_state and precompute it. This gets rid of the ugly ELD mutation during intel_audio_codec_enable(), and opens the door for the state checker. v2: Make another copy for the acomp hooks (Chaitanya) Split out the bogus ELD handling change (Jani) Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1 Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230124144628.4649-5-ville.syrjala@linux.intel.com
2023-01-12drm/i915/display: Prune Interlace modes for Display >=12Ankit Nautiyal
Defeature Display Interlace support. Support for interlace modes is removed from Gen 12 onwards. Pruning the interlace modes for HDMI for Display >=12. Bspec: 50490 v2: Add check for both DP and HDMI. (Ville) Get rid of redundant check for interlace mode in modevalid. (Ville) v3: Simplify the condition to avoid interlace modes. (Jani) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105124125.1129653-1-ankit.k.nautiyal@intel.com
2023-01-12drm/i915/display: Drop check for doublescan mode in modevalidAnkit Nautiyal
Since the DP/HDMI connector do not set connector->doublescan_allowed, the doublescan modes will get automatically filtered during drm_helper_probe_single_connector_modes(). Therefore check for double scan modes is not required and is dropped from modevalid functions for both DP and HDMI. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com
2022-12-12drm/i915/mtl: Initial display workaroundsJouni Högander
This patch introduces initial workarounds for mtl platform v2: switch IS_MTL_DISPLAY_STEP to use IS_METEORLAKE from testing display ver. (Tvrtko) v3: clerical issues, extend 16015201720 to mtl. (MattR) v4: make sure 16015201720 includes display 13. (MattR) Bspec: 66624 Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221209220543.502047-1-matthew.s.atwood@intel.com
2022-11-30drm/i915/hdmi: SPD infoframe update for discreteTaylor, Clinton A
Replace integrated with discrete for dgfx platforms. v2: commit title reword (Jani) v3: use variable name i915 (Jani) v4: commit message reword (MattR) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Taylor, Clinton A <clinton.a.taylor@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221129203343.720860-1-clinton.a.taylor@intel.com
2022-11-17drm/i915: Treat HDMI as DVI when cloningVille Syrjälä
When doing HDMI+non-HDMI cloning the other sink can't get the infoframes/etc. so stuff like limited range output is not a good idea. Similarly when doing HDMI+HDMI cloning on g4x (only platform where we allow it) only one of the ports can receive infoframes and so again using any fancy stuff is a bad idea. We also don't track the inforames/audio state per-port so we'd end up with some kind of random mismash state when multipled encoders try to compute the same stuff. And the hardware will in fact automagically disable audio/infoframe transmission if you try to enable it for multiple HDMI ports at the same time. Thus disable all HDMI specific features when cloning. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915: Force RGB output for DVI sinkVille Syrjälä
YCbCr output requires infoframes and whatnot, so don't allow it when dealing with a DVI sink (or a HDMI sink we wish to treat as DVI). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915: Introduce g4x_hdmi_compute_config()Ville Syrjälä
Start pulling some of the more platform specific things out from intel_hdmi_compute_config(). has_pch_encoder is clearly one such thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-14Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Catch up on 6.1-rc cycle in order to solve the intel_backlight conflict on linux-next. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-11-11drm/i915: stop including i915_irq.h from i915_trace.hJani Nikula
Turns out many of the files that need i915_reg.h get it implicitly via {display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h -> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h, makes sense to drop it, but that requires adding quite a few new includes all over the place. Prefer including i915_reg.h where needed instead of adding another implicit include, because eventually we'll want to split up i915_reg.h and only include the specific registers at each place. Also some places actually needed i915_irq.h too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
2022-11-01Merge tag 'drm-intel-next-2022-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Hotplug code clean-up and organization (Jani, Gustavo) - More VBT specific code clean-up, doc, organization, and improvements (Ville) - More MTL enabling work (Matt, RK, Anusha, Jose) - FBC related clean-ups and improvements (Ville) - Removing unused sw_fence_await_reservation (Niranjana) - Big chunch of display house clean-up (Ville) - Many Watermark fixes and clean-ups (Ville) - Fix device info for devices without display (Jani) - Fix TC port PLLs after readout (Ville) - DPLL ID clean-ups (Ville) - Prep work for finishing (de)gamma readout (Ville) - PSR fixes and improvements (Jouni, Jose) - Reject excessive dotclocks early (Ville) - DRRS related improvements (Ville) - Simplify uncore register updates (Andrzej) - Fix simulated GPU reset wrt. encoder HW readout (Imre) - Add a ADL-P workaround (Jose) - Fix clear mask in GEN7_MISCCPCTL update (Andrzej) - Temporarily disable runtime_pm for discrete (Anshuman) - Improve fbdev debugs (Nirmoy) - Fix DP FRL link training status (Ankit) - Other small display fixes (Ankit, Suraj) - Allow panel fixed modes to have differing sync polarities (Ville) - Clean up crtc state flag checks (Ville) - Fix race conditions during DKL PHY accesses (Imre) - Prep-work for cdclock squash and crawl modes (Anusha) - ELD precompute and readout (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y1wd6ZJ8LdJpCfZL@intel.com
2022-10-26drm/i915/hdmi: stop using connector->override_edidJani Nikula
The connector->override_edid flag is strictly for EDID override debugfs management, and drivers have no business using it. The check for override_edid was added in commit 301906290553 ("drm/i915: Ignore TMDS clock limit for DP++ when EDID override is set") to facilitate mode list cross-checking against modes in override EDID when the connector in question isn't even connected. The dual mode detect fallback would do VBT based limiting in this case. Instead of override EDID, check for connector forcing in the fallback. v2: Simply use !connector->force (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c8b45867cf37134ab40be23e22825ca45adc6041.1666614699.git.jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 22:26:46 +0000