summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_fdi.c
AgeCommit message (Collapse)Author
2023-05-15drm/i915/display: add i915 parameter to I915_STATE_WARN()Jani Nikula
Add i915 parameter to I915_STATE_WARN() and use device based logging. Done using cocci + hand edited where there was no i915 local variable ready. v2: avoid null deref in verify_connector_state() Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
2023-03-30drm/i915/fdi: split out FDI regs to a separate fileJani Nikula
Clean up i915_reg.h by splitting out FDI regs to display/intel_fdi_regs.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bba37e46d767e2193d49d1d2e289040c6bf8229b.1678973282.git.jani.nikula@intel.com
2023-03-15drm/i915: Don't switch to TPS1 when disabling DP_TP_CTLVille Syrjälä
AFAICS Bspec has never asked us to switch to TPS1 when *disabling* DP_TP_CTL. Let's stop doing that in case it confuses something. We do have to switch before we *enable* DP_TP_CTL, but that is already being handled correctly. v2: Do the same for FDI v3: Rebase Reviewed-by: Imre Deak <imre.deak@intel.com> #v1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230308212627.7601-1-ville.syrjala@linux.intel.com
2023-02-17drm/i915: s/PIPECONF/TRANSCONF/Ville Syrjälä
Rename PIPECONF to TRANSCONF to make it clear what it actually applies to. While the usual convention is to pick the earliers name I think in this case it's more clear to use the later name. Especially as even the register offset is in the wrong range (0x70000 vs. 0x60000) and thus makes it look like this is per-pipe. There is one place in gvt that's doing something with TRANSCONF while iterating with for_each_pipe(). So that might not be doing the right thing for TRANSCODER_EDP, dunno. Not knowing what it does I left it as is to avoid breakage. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-16drm/i915/display/interfaces: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105131046.2173431-8-andrzej.hajda@intel.com
2023-01-30drm/i915/display/fdi: use intel_de_rmw if possibleAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221215125610.1161729-1-andrzej.hajda@intel.com
2022-11-11drm/i915: stop including i915_irq.h from i915_trace.hJani Nikula
Turns out many of the files that need i915_reg.h get it implicitly via {display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h -> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h, makes sense to drop it, but that requires adding quite a few new includes all over the place. Prefer including i915_reg.h where needed instead of adding another implicit include, because eventually we'll want to split up i915_reg.h and only include the specific registers at each place. Also some places actually needed i915_irq.h too. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
2022-09-08drm/i915: Use a fixed N value alwaysVille Syrjälä
Windows/BIOS always uses fixed N values. Let's match that behaviour. Allows us to also get rid of that constant_n quirk stuff. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-17-ville.syrjala@linux.intel.com
2022-08-31drm/i915: move and group fdi members under display.fdiJani Nikula
Move display fdi related members under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b66fe7cf2c6f9e5b7bbfcaff40400492ac706721.1661779055.git.jani.nikula@intel.com
2022-08-29drm/i915: move fdi_funcs to display.funcsJani Nikula
Move display fdi functions under drm_i915_private display sub-struct. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/16ff8df6c08411c0e5aac3356dffe7f5120fcfeb.1661346845.git.jani.nikula@intel.com
2022-03-02drm/i915: Use str_on_off()Lucas De Marchi
Remove the local onoff() implementation and adopt the str_on_off() from linux/string_helpers.h. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225234631.3725943-4-lucas.demarchi@intel.com
2022-02-09drm/i915/fdi: hide struct intel_fdi_funcsJani Nikula
The struct is only needed in intel_fdi.c, move it there. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6c524a9abb74be9b4d6a084de5461404b823a10.1643896905.git.jani.nikula@intel.com
2021-12-09drm/i915/trace: split out display trace to a separate fileJani Nikula
Add display/intel_display_trace.[ch] for defining display tracepoints. The main goal is to reduce cross-includes between gem and display. It would be possible split up tracing even further, but that would lead to more boilerplate. We end up having to include intel_crtc.h in a few places because it was pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and that's no longer the case. There should be no changes to tracepoints. v3: - Rebase v2: - Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris) - Remove useless comments (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com
2021-12-02drm/i915/crtc: rename intel_get_crtc_for_pipe() to intel_crtc_for_pipe()Jani Nikula
The "get" in the name implies reference counting, remove it. This also makes the function conform to naming style. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6105d0ff44efac3c999af6382e4b0729e251f1e1.1638366969.git.jani.nikula@intel.com
2021-10-19drm/i915: Move intel_ddi_fdi_post_disable() to fdi codeVille Syrjälä
Reanme intel_ddi_fdi_post_disable() to hsw_fdi_disable() and relocate it next to all the other code dealing with FDI_RX. intel_ddi.c has now been cleansed of FDI_RX. In order to avoid exposing intel_disable_ddi_buf() outside intel_ddi.c we can just open code the DDI_BUF_CTL write. The enable side already has all that stuff open coded so this actually is more symmetric. But we do need to remeber to bring the intel_wait_ddi_buf_idle() call over from inside intel_disable_ddi_buf(). Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-9-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-10-19drm/i915: Move PCH refclock stuff into its own fileVille Syrjälä
Move the PCH refclk stuff (including all the LPT/WPT iCLKIP/CLKOUT_DP things) to its own file. We also suck in the mPHY programming from intel_fdi.c since we're the only caller. Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.com Reviewed-by: Dave Airlie <airlied@redhat.com>
2021-10-14drm/i915: rename intel_sideband.[ch] to intel_sbi.[ch]Jani Nikula
Now that intel_sideband.[ch] has been decluttered, it's pure lpt/wpt iosf sideband. Let's call it intel_sbi, following the function naming. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/183423ff23b2d259e4a197e74daf6bcd750bfe14.1634207064.git.jani.nikula@intel.com
2021-10-01drm/i915/fdi: use -EAGAIN instead of local special return valueJani Nikula
Using standard -EAGAIN should be perfectly fine instead of using a special case value. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210930093229.28598-1-jani.nikula@intel.com
2021-10-01drm/i915/fdi: move fdi modeset asserts to intel_fdi.cJani Nikula
Keep the functionality and the assert code together. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/427d27eb4e5daca208d496d6c2ffc91ed90ba714.1632992608.git.jani.nikula@intel.com
2021-09-29drm/i915: constify fdi link training vtableDave Airlie
Put the vtable into ro memory. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ec4687956f9b98024fea55b2f0ed1e192e244ff1.1632869550.git.jani.nikula@intel.com
2021-09-29drm/i915: split fdi link training from display vtable.Dave Airlie
It may make sense to merge this with display again later, however the fdi use of the vtable is limited to only a few generations. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7af7359b6cec33bd2d32152893d9a1e8f8cf7f21.1632869550.git.jani.nikula@intel.com
2021-09-29drm/i915/display: add intel_fdi_link_train wrapper.Dave Airlie
This wraps the fdi link training vfunc to make it clearer. Suggested by Jani. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1bb978bcb6f16fbdaf08f2800a179b774525b59e.1632869550.git.jani.nikula@intel.com
2021-09-15drm/i915: s/pipe/transcoder/ when dealing with PIPECONF/TRANSCONFVille Syrjälä
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder. Bigjoiner is making life even more confusing by introducing a N:1 relationship between pipes and transcoders. In that case we only enable/configure the transcoder corresponding to the master pipe. Let's do some renames to make it clear we're dealing with the transcoder rather than pipe when it comes to PIPECONF/TRANSCONF. I decided to leave the _cpu_ part out from the function/macro names since the PCH transcoder related stuff already has a _pch_ in their name. So shouldn't be possible to confuse them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-08-27drm/i915/fdi: convert BUG()'s to MISSING_CASE()Jani Nikula
These shouldn't happen, but in the off chance they do, we'll want a warning rather than panic. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b86132ac63f43f79e51eb63f948beccba85bf449.1629906431.git.jani.nikula@intel.com
2021-08-27drm/i915/fdi: move fdi mphy reset and programming to intel_fdi.cJani Nikula
This fairly detailed stuff that really has no place in intel_display.c. Combine the calls into one to avoid exposing both. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0037775480380e5d73d0b112da478d6f0ea30fe.1629906431.git.jani.nikula@intel.com
2021-08-27drm/i915/fdi: move more FDI stuff to FDI link train hooksJani Nikula
Accept slight duplication in the fdi link train hooks in exchange for simplification in ilk_pch_enable(). This lets us make ivb_update_fdi_bc_bifurcation() static again, now in intel_fdi.c. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7984e670c6bb092d213d90f838d526d594d4a690.1629906431.git.jani.nikula@intel.com
2021-08-27drm/i915/fdi: move fdi bc bifurcation functions to intel_fdi.cJani Nikula
Move FDI related functions to intel_fdi.c. Don't bother with renaming as we'll make the functions static shortly. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fd8afe4876f0b0762a9c69e01762a8dba31349e5.1629906431.git.jani.nikula@intel.com
2021-08-27drm/i915/fdi: move intel_update_fdi_pll_freq to intel_fdi.cJani Nikula
Move FDI related functions to intel_fdi.c. Rename to have intel_fdi prefix while at it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/da1609dfce4623f8ec86254aea6c2c8679b6a37f.1629906431.git.jani.nikula@intel.com
2021-08-24drm/i915/fdi: make intel_fdi_link_freq() return intJani Nikula
The unsigned doesn't help us here. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210823093645.10464-1-jani.nikula@intel.com
2021-08-20drm/i915/fdi: move intel_fdi_link_freq() to intel_fdi.[ch]Jani Nikula
There's no performance reason to have it as static inline; move it out of intel_display_types.h to reduce clutter and dependency on i915_drv.h. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8c9bb23d92878deb1ecc75427ec6648bd3505816.1629281426.git.jani.nikula@intel.com
2021-06-24drm/i915: s/intel_crtc/crtc/Ville Syrjälä
Clear out the straggler 'intel_crtc' variables. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-06-23drm/i915: Introduce encoder->get_buf_trans()Ville Syrjälä
Convert the get_buf_trans() functions into an encoder vfunc. Allows us to get rid of bunch of platform if-ladders. v2: Handle adl-p Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-10-ville.syrjala@linux.intel.com
2021-06-23drm/i915: Introduce hsw_get_buf_trans()Ville Syrjälä
All the other platforms handle the output_type stuff in their *_get_buf_trans() functions. Do the same for hsw/bdw/skl. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-3-ville.syrjala@linux.intel.com
2021-06-23drm/i915: s/intel/hsw/ for hsw/bdw/skl buf transVille Syrjälä
Give the hsw/bdw/skl buf trans stuff a better namespace. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608073603.2408-2-ville.syrjala@linux.intel.com
2021-05-05drm/i915: Don't include intel_de.h from intel_display_types.hVille Syrjälä
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
2021-03-23drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGEMatt Roper
ILK is the only platform that we consider "gen5" and SNB is the only platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then replace numeric platform tests for these two generations with direct platform tests with the following Coccinelle semantic patch: @@ expression dev_priv; @@ - IS_GEN(dev_priv, 5) + IS_IRONLAKE(dev_priv) @@ expression dev_priv; @@ - IS_GEN(dev_priv, 6) + IS_SANDYBRIDGE(dev_priv) @@ expression dev_priv; @@ - IS_GEN_RANGE(dev_priv, 5, 6) + IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) This will simplify our upcoming patches which eliminate INTEL_GEN() usage in the display code. v2: - Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville) - Rebase + regenerate from semantic patch Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
2021-02-16drm/i915: Introduce .{enable,disable}_clock() encoder vfuncsVille Syrjälä
The current code dealing with the clock routing for DDI encoders is a maintenance nightmare. Let's start cleaning it up by allowing the encoder to provide vfuncs for enablign/disabling the clock. We leave them initially unimplemented, falling back to the old if-else approach. v2: Convert the FDI enable sequence Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> #v2 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-3-ville.syrjala@linux.intel.com
2021-02-16drm/i915: Use intel_ddi_clk_select() for FDIVille Syrjälä
We want to put all DDI clock routing code into one place. Unify the FDI enable sequence to use the standard function instead of hand rolling its own. The disable sequence already uses the normal thing. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205214634.19341-2-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2021-02-05drm/i915: migrate hsw fdi code to new file.Dave Airlie
Daniel asked for this, but it's a bit messy and I'm not sure how best to clean it up yet. Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: also moved fdi buf trans to intel_fdi.c.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/44491f2465549ea5c2e48cde5437fa232f77ab96.1612467466.git.jani.nikula@intel.com
2021-01-16drm/i915: split fdi code out from intel_display.cDave Airlie
This just refactors out the fdi code to a separate file. Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: cleaned up intel_fdi.h a bit.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9d52c3d91f0973af308ede16e266fc9b753ecf9.1610622609.git.jani.nikula@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:21:22 +0000