summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_dp.c
AgeCommit message (Collapse)Author
2020-10-30drm/i915: Pimp AUX CH namesVille Syrjälä
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl, AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include the full encoder name in the AUX CH name as well (as opposed to just using port_name() which wouldn't give us the right thing on tgl+). Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-6-ville.syrjala@linux.intel.com
2020-10-30drm/i915: Introduce AUX_CH_USBCnVille Syrjälä
Just like with the DDIs tgl+ renamed the AUX CHs to reflect the type of the DDI. Let's add the aliasing enum values for the type-C AUX CHs. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-5-ville.syrjala@linux.intel.com
2020-10-20drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/Ville Syrjälä
Rename intel_dp_sink_dpms() to intel_dp_set_power() so one doesn't always have to convert from the DPMS enum values to the actual DP D-states. Also when dealing with a branch device this has nothing to do with any sink, so the old name was nonsense anyway. Also adjust the debug message accordingly, and pimp it with the standard encoder id+name thing. Trivial bits done with cocci: @@ expression DP; @@ ( - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF) + intel_dp_set_power(DP, DP_SET_POWER_D3) | - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON) + intel_dp_set_power(DP, DP_SET_POWER_D0) ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-20drm/i915: Move the lspcon resume from .reset() to intel_dp_sink_dpms()Ville Syrjälä
Rather that try to trick LSPCON back into PCON mode from the .reset() hook let's just do that as a regular part of the normal modeset sequence, which is going to take care of the system resume case. During a normal modeset this should normally be a nop as the mode should have already been switched by .detect(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-16drm/i915: Inline intel_dp_ycbcr420_config()Ville Syrjälä
intel_dp_ycbcr420_config() is rather pointless. Just inline it directly into intel_dp_compute_config(). This gets rid of the ugly double assignment of output_format. Not really sure what the best policy would be when the user supplies a mode classified by the display as "YCbCr 4:2:0 only", but we know that we can't do YCbCr 4:2:0 output. For now keep the current behaviour of just silently upgrade it to RGB 4:4:4. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-10-16drm/i915: Nuke lspcon_ycbcr420_config()Ville Syrjälä
Remove the lspcon special case from intel_dp_compute_config() and just treat it like any other DFP than can do 4:4:4->4:2:0 conversion. The only difference between the two codepaths was that the lspcon code tried to already halve port_clock. That was just total nonsense as we hadn't even computed the base port_clock at that time. All that stuff happens intel_dp_compute_link_config*() and it already takes care of the 4:2:0 clock reduction. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200924184156.24491-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-10-14drm/i915/jsl: Split EHL/JSL platform info and PCI idsTejas Upadhyay
Recently we came across requirement to identify EHL and JSL platform to program them differently. Thus Split the basic platform definition, macros, and PCI IDs to differentiate between EHL and JSL platforms. Also, IS_ELKHARTLAKE is replaced with IS_JSL_EHL everywhere. Changes since V1 : - Rebased to avoid merge conflicts - Added missed check for jasperlake in intel_uc_fw.c Cc : Matt Roper <matthew.d.roper@intel.com> Cc : Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201013192948.63470-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2020-10-12drm/i915: Switch to LTTPR non-transparent mode link trainingImre Deak
The DP Standard's recommendation is to use the LTTPR non-transparent mode link training if LTTPRs are detected, so let's do this. Besides power-saving, the advantages of this are that the maximum number of LTTPRs can only be used in non-transparent mode (the limit is 5-8 in transparent mode), and it provides a way to narrow down the reason for a link training failure to a given link segment. Non-transparent mode is probably also the mode that was tested the most by the industry. The changes in this patchset: - Pass the DP PHY that is currently link trained to all LT helpers, so that these can access the correct LTTPR/DPRX DPCD registers. - During LT take into account the LTTPR common lane rate/count and the per LTTPR-PHY vswing/pre-emph limits. - Switch to LTTPR non-transparent LT mode and train each link segment according to the sequence in DP Standard v2.0 (complete CR/EQ for each segment before continuing with the next segment). v2: - Switch to non-transparent mode during connector detection, which is required before reading the per-PHY LTTPR capabilities. - Move the DP_PHY_LTTPR() macro to drm_dp_helper.h (Ville) - Use the new drm_dp_dpcd_read_phy_link_status() instead of adding the same logic to intel_dp_get_link_status(). (Ville) - Make intel_dp_lttpr_phy_caps() return a pointer to the whole array instead of a pointer to its first element. (Ville) - Add the intel_dp_phy_is_downstream_of_source() helper. (Ville) - Add a code comment about the disable->enable quirk of non-transparent mode. - Add the intel_dp_training_pattern_set_reg() helper. - Fix checkpatch/sparse warns. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-7-imre.deak@intel.com
2020-10-12drm/i915: Switch to LTTPR transparent mode link trainingImre Deak
By default LTTPRs should be in transparent link training mode, nevertheless in this patch we switch to this default mode explicitly. The DP Standard recommends this, supposedly because an LTTPR may be left in the non-transparent mode (by BIOS, previous kernel, or after reset due to a firmware bug). I haven't seen this happening, but let's follow the DP Standard. v2: - Add a code comment about the explicit disabling of non-transparent mode. v3: - Move check to prevent initing LTTPRs on eDP to init_dp_lttpr_init(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-6-imre.deak@intel.com
2020-10-12drm/i915: Simplify the link training functionsImre Deak
Split the prepare, link training, fallback-handling steps into their own functions for clarity and as a preparation for the upcoming LTTPR changes. While at it also: - Unexport and inline intel_dp_set_idle_link_train(), which is used at a single place. - Add some documentation to functions that are exported or that can use a better description about which part of the LT sequence they implement. v2: (Ville) - Unexport/inline intel_dp_set_idle_link_train() - Make the documentation of intel_dp_prepare_link_train()/intel_dp_stop_link_train() more accurate wrt. HW specific details. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-3-imre.deak@intel.com
2020-10-12drm/i915: Fix DP link training pattern maskImre Deak
An LTTPR can be trained with training pattern 4 even if the DPCD revision is < 1.4, but drm_dp_training_pattern_mask() would change pattern 4 to pattern 3 on those DPCD revisions. Since intel_dp_training_pattern() makes already sure that the proper training pattern is used, all that needs to be masked out is the scrambling disable flag, which is or'd to the mask later based on the training pattern. v2: - Use a helper instead of open-coding the masking. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201007170917.1764556-2-imre.deak@intel.com
2020-10-09drm/i915: Wait for eDP panel power cycle delay on reboot on all platformsVille Syrjälä
Extend the eDP panel power cycle delay wait on reboot handling to cover all platforms. No reason to think that VLV/CHV are in any way special since the documentation states that the hardware power cycle delay goes back to its default value on reset, and that may not be enough for all panels. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-10-09drm/i915: Replace the VLV/CHV eDP reboot notifier with the .shutdown() hookVille Syrjälä
Currently VLV/CHV use a reboot notifier to make sure the panel power cycle delay isn't violated across a system reboot. Replace that with the new encoder .shutdown() hook. And let's also stop overriding the power cycle delay with the max value. No idea why the current code does that. The already programmed delay should be correct. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-10-07drm/i915/display/ehl: Limit eDP to HBR2José Roberto de Souza
Recent update in documentation defeatured eDP HBR3 for EHL and JSL. v2: - Remove dead code in ehl_get_combo_buf_trans() v3: - Rebase BSpec: 32247 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201005175447.93430-1-jose.souza@intel.com
2020-10-06drm/i915: Add an encoder hook to sanitize its state during init/resumeImre Deak
Atm, if a full modeset is performed during the initial modeset the link training will happen with uninitialized max DP rate and lane count. Make sure the corresponding encoder state is initialized by adding an encoder hook called during driver init and system resume. A better alternative would be to store all states in the CRTC state and make this state available for the link re-training code. Also instead of the DPCD read in the hook there should be really a proper sink HW readout in place. Both of these require a bigger rework, so for now opting for this minimal fix to make at least full initial modesets work. The patch is based on https://patchwork.freedesktop.org/patch/101473/?series=10354&rev=3 v2: (Ville) - s/sanitize_state/sync_state/ - No point in calling the hook when CRTC is disabled, remove the call. - No point in calling the hook for MST, remove it. v3: Check only DPCD_REV to avoid clobbering intel_dp->dpcd. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201005230154.1477653-1-imre.deak@intel.com
2020-10-06drm/i915: Check for unsupported DP link rates during initial commitImre Deak
Some BIOSes set an unsupported/imprecise DP link rate (for instance on TGL A stepping). Make sure that we do an encoder recompute and a modeset in this case. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201003001846.1271151-4-imre.deak@intel.com
2020-10-06drm/i915: Move the initial fastset commit check to encoder hooksImre Deak
Move the checks to decide whether a fastset is possible during the initial commit to an encoder hook. This check is really encoder specific and the next patch will also require this adding a DP encoder specific check. v2: Fix negated condition in gen11_dsi_initial_fastset_check(). v3: Make sure to call the hook for all encoders on the crtc. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201005215311.1475666-1-imre.deak@intel.com
2020-10-01drm/i915: Init lspcon after HPD in intel_dp_detect()Kai-Heng Feng
On HP 800 G4 DM, if HDMI cable isn't plugged before boot, the HDMI port becomes useless and never responds to cable hotplugging: [ 3.031904] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon [ 3.031945] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D Seems like the lspcon chip on the system only gets powered after the cable is plugged. Consilidate lspcon_init() into lspcon_resume() to dynamically init lspcon chip, and make HDMI port work. v6: - Rebase on latest for-linux-next. v5: - Consolidate lspcon_resume() with lspcon_init(). - Move more logic into lspcon code. v4: - Trust VBT in intel_infoframe_init(). - Init lspcon in intel_dp_detect(). v3: - Make sure it's handled under long HPD case. v2: - Move lspcon_init() inside of intel_dp_hpd_pulse(). Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/203 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200610075542.12882-1-kai.heng.feng@canonical.com
2020-10-01drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl,status}Ville Syrjälä
Now that we've plumbed the crtc state all the way down we can eliminate the DP_TP_{CTL,STATUS} register offsets from intel_dp, and instead we derive them directly from the crtc state. And thus we can get rid of the nasty hack in intel_ddi_get_config() which mutates intel_dp during the readout. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-12-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-01drm/i915: Plumb crtc_state to link trainingVille Syrjälä
Get rid of mode crtc->config usage, and some ad-hoc intel_dp state usage by plumbing the crtc state all the way down to the link training code. Unfortunately we do have to keep some cached state in intel_dp so that we can do the "does the link need retraining?" checks from the short hpd handler. v2: Add intel_crtc_state forward declaration v3: Don't kill the PHY test code totally since it's now in the hotplug work where we can get at the states v4: Don't resurrect the debug scrambling disable bit (Imre) Use intel_dp_mst_is_master_trans() (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001111053.24451-1-ville.syrjala@linux.intel.com
2020-10-01drm/i915: Shove the PHY test into the hotplug workVille Syrjälä
Doing any kind modeset stuff from the short hpd handler is verboten. The ad-hoc PHY test modeset code violates this. And by calling various link training related functions it's now blocking further work to plumb the crtc state down into the link training code. Let's hack around that by pushing the PHY test stuff into the hotplug work where it's less of a problem. Still not great but at least acceptable. We take a few pages from the link retraining handbook to handle the locking and whatnot. v2: Fix the intel_dp_hotplug() return value Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200930100412.9313-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-01drm/i915: Make intel_dp_process_phy_request() staticVille Syrjälä
intel_dp_process_phy_request() has no business being externally visible. Make it static. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-01drm/i915: s/old_crtc_state/crtc_state/Ville Syrjälä
intel_dp_enable_port() is called during the enable sequence, so there is nothing old about the passed in crtc state. Rename it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-01drm/i915: s/pre_empemph/preemph/Ville Syrjälä
I managed to fumble some functions names. Fix them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-09-24drm/i915: Use the correct bpp when validating "4:2:0 only" modesVille Syrjälä
When validating a "YCbCr 4:2:0 only" mode we must take into account the fact that we're going to be outputting YCbCr 4:2:0 or 4:4:4 (when a DP->HDMI protocol converter is doing the 4:2:0 downsampling). For YCbCr 4:4:4 the minimum output bpc is 8, for YCbCr 4:2:0 it'll be half that. The currently hardcoded 6bpc is only correct for RGB 4:4:4, which we will never use with these kinds of modes. Figure out what we're going to output and use the correct min bpp value to validate whether the link has sufficient bandwidth. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-3-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
2020-09-24drm/i915: Decouple intel_dp_{min,output}_bpp() from crtc_stateVille Syrjälä
Pass the output_format directly to intel_dp_{min,output}_bpp() rather than passing in the crtc_state and digging out the output_format inside the functions. This will allow us to reuse the functions for mode validation purposes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
2020-09-24drm/i915: Extract intel_dp_output_format()Ville Syrjälä
Refactor the output_format calculation into a helper so that we can reuse it for mode validation as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-1-ville.syrjala@linux.intel.com Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
2020-09-17drm/i915: Do YCbCr 444->420 conversion via DP protocol convertersVille Syrjälä
For platforms that can't do native 4:2:0 outout we may still be able to do it by getting the DP->HDMI protocol converter to perform the 4:4:4->4:2:0 downsamling for us. In this case we have to configure our hardware to output YCbCr 4:4:4, which we've already hooked up so all we need to do is flip the switch. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-19-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: DP->HDMI TMDS clock limits vs. deep colorVille Syrjälä
Account for the TMDS clock limits declared by the DFP when determining what color depth we're going to use. v2: Drop the reference to DP++ dongle since it's not handled here Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-17-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Handle downstream facing ports w/o EDIDVille Syrjälä
Use drm_dp_downstream_mode() to get a suitable mode for downstream facing ports which don't have an EDID. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-15-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Configure DP 1.3+ protocol converted HDMI modeVille Syrjälä
DP 1.3 adds some extra control knobs for DP->HDMI protocol conversion. Let's use that to configure the "HDMI mode" (ie. infoframes vs. not) based on the capabilities of the sink. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-13-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Deal with TMDS DFP clock limitsVille Syrjälä
Use the new helpers to extract the TMDS clock limits from the downstream facing port and check them in .mode_valid(). TODO: we should check these in .compute_config() too to eg. determine if we can do deep color on the HDMI side or not Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-12-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Reworkd DP DFP clock handlingVille Syrjälä
Move the downstream facing port dotclock check into a new function (intel_dp_mode_valid_downstream()) so that we have a nice future place where we can collect other related checks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-10-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Redo drm_dp_downstream_max_clock() as drm_dp_downstream_max_dotclock()Ville Syrjälä
We want to differentiate between the DFP dotclock and TMDS clock limits. Let's convert the current thing to just give us the dotclock limit. v2: Use Returns: for kdoc (Lyude) Fix up nouveau code too Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-9-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/dp: Pimp drm_dp_downstream_max_bpc()Ville Syrjälä
Deal with more cases in drm_dp_downstream_max_bpc(): - DPCD 1.0 -> assume 8bpc for non-DP - DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything - DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap - anything else -> assume 8bpc v2: Use Returns: for kdoc (Lyude) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-8-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915: Reworkd DFP max bpc handlingVille Syrjälä
Stash the downstream facing port max bpc away during intel_dp_set_edid(). We'll soon need the EDID in there so we can't figure this out so easily during .compute_config() anymore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-6-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-17drm/i915/lspcon: Do not send infoframes to non-HDMI sinksVille Syrjälä
Non-HDMI sinks shouldn't be sent infoframes. Check for that when using LSPCON. FIXME: How do we turn off infoframes once enabled? Do we even have to? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200904115354.25336-3-ville.syrjala@linux.intel.com Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-15drm/i915: Move hpd_pin setup to encoder initVille Syrjälä
Currently DP/HDMI/DDI encoders init their hpd_pin from the connector init. Let's move it to the encoder init so that we don't need to add platform specific junk to the connector init (which is shared by all g4x+ platforms). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630215601.28557-10-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-09-15drm/i915: Reduce INTEL_DISPLAY_ENABLED to just treat outputs as disconnectedVille Syrjälä
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED return false we have to be capable of shutting it down cleanly so as to not anger the hw. To that end let's reduce the effect of !INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected. Should prevent anyone from automagically enabling any of them, while still allowing us to cleanly shut them down. v2: Put the check into the right place for CRT Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-09-11Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi
Sync drm-intel-gt-next here so we can have an unified fixes flow. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-01drm/i915: Factor out HDCP shim functions from dp for use by dp_mstSean Paul
These functions are all the same for dp and dp_mst, so move them into a dedicated file for both sst and mst to use. Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-11-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-12-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-12-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-12-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-12-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-12-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-13-sean@poorly.run #v7 Changes in v2: -None Changes in v3: -Created intel_dp_hdcp.c for the shared functions to live (Ville) Changes in v4: -Rebased on new drm logging change Changes in v5: -None Changes in v6: -None Changes in v7: -Rebased patch Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-13-sean@poorly.run
2020-09-01drm/i915: Don't fully disable HDCP on a port if multiple pipes are using itSean Paul
This patch is required for HDCP over MST. If a port is being used for multiple HDCP streams, we don't want to fully disable HDCP on a port if one of them is disabled. Instead, we just disable the HDCP signalling on that particular pipe and exit early. The last pipe to disable HDCP will also bring down HDCP on the port. In order to achieve this, we need to keep a refcount in intel_digital_port and protect it using a new hdcp_mutex. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-8-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-9-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-9-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-9-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-9-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-9-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-10-sean@poorly.run #v7 Changes in v2: -Move the toggle_signalling call into _intel_hdcp_disable so it's called from check_work Changes in v3: -None Changes in v4: -None Changes in v5: -Change WARN_ON to drm_WARN_ON Changes in v6: -None Changes in v7: -Split minor intel_hdcp_disable refactor into separate patch (Ramalingam) Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-10-sean@poorly.run
2020-09-01drm/i915: Use the cpu_transcoder in intel_hdcp to toggle HDCP signallingSean Paul
Instead of using intel_dig_port's encoder pipe to determine which transcoder to toggle signalling on, use the cpu_transcoder field already stored in intel_hdmi. This is particularly important for MST. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-6-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-6-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-6-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-6-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-6-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-6-sean@poorly.run #v7 Changes in v2: -Added to the set Changes in v3: -s/hdcp/hdmi/ in commit msg (Ram) Changes in v4: -Rebased on intel_de_(read|write) change Changes in v5: -Update hdcp->cpu_transcoder in intel_hdcp_enable so it works with pipe != 0 Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-6-sean@poorly.run
2020-09-01drm/i915: Intercept Aksv writes in the aux hooksSean Paul
Instead of hand rolling the transfer ourselves in the hdcp hook, inspect aux messages and add the aksv flag in the aux transfer hook. IIRC, this was the original implementation and folks wanted this hack to be isolated to the hdcp code, which makes sense. However in testing an LG monitor on my desk, I noticed it was passing back a DEFER reply. This wasn't handled in our hand-rolled code and HDCP auth was failing as a result. Instead of copy/pasting all of the retry logic and delays from drm dp helpers, let's just use the helpers and hide the aksv select as best as we can. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-3-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-5-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-5-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-5-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-5-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-5-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-5-sean@poorly.run #v7 Changes in v2: -Remove 'generate' in intel_dp_aux_generate_xfer_flags, make arg const (Ville) -Bundle Aksv if statement together (Ville) -Rename 'txbuf' to 'aksv' (Ville) Changes in v3: -None Changes in v4: -None Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-5-sean@poorly.run
2020-08-31drm/i915/dp: Extract drm_dp_read_dpcd_caps()Lyude Paul
Since DP 1.3, it's been possible for DP receivers to specify an additional set of DPCD capabilities, which can take precedence over the capabilities reported at DP_DPCD_REV. Basically any device supporting DP is going to need to read these in an identical manner, in particular nouveau, so let's go ahead and just move this code out of i915 into a shared DRM DP helper that we can use in other drivers. v2: * Remove redundant dpcd[DP_DPCD_REV] == 0 check * Fix drm_dp_dpcd_read() ret checks Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-20-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_sink_count()Lyude Paul
And of course, we'll also need to read the sink count from other drivers as well if we're checking whether or not it's supported. So, let's extract the code for this into another helper. v2: * Fix drm_dp_dpcd_readb() ret check * Add back comment and move back sink_count assignment in intel_dp_get_dpcd() v5: * Change name from drm_dp_get_sink_count() to drm_dp_read_sink_count() * Also, add "See also:" section to kdocs Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-17-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_sink_count_cap()Lyude Paul
Since other drivers are also going to need to be aware of the sink count in order to do proper dongle detection, we might as well steal i915's DP_SINK_COUNT helpers and move them into DRM helpers so that other dirvers can use them as well. Note that this also starts using intel_dp_has_sink_count() in intel_dp_detect_dpcd(), which is a functional change. v5: * Change name from drm_dp_has_sink_count() to drm_dp_read_sink_count_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-16-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_downstream_info()Lyude Paul
We're going to be doing the same probing process in nouveau for determining downstream DP port capabilities, so let's deduplicate the work by moving i915's code for handling this into a shared helper: drm_dp_read_downstream_info(). Note that when we do this, we also do make some functional changes while we're at it: * We always clear the downstream port info before trying to read it, just to make things easier for the caller * We skip reading downstream port info if the DPCD indicates that we don't support downstream port info * We only read as many bytes as needed for the reported number of downstream ports, no sense in reading the whole thing every time v2: * Fixup logic for calculating the downstream port length to account for the fact that downstream port caps can be either 1 byte or 4 bytes long. We can actually skip fixing the max_clock/max_bpc helpers here since they all check for DP_DETAILED_CAP_INFO_AVAILABLE anyway. * Fix ret code check for drm_dp_dpcd_read v5: * Change name from drm_dp_downstream_read_info() to drm_dp_read_downstream_info() * Also, add "See Also" sections for the various downstream info functions (drm_dp_read_downstream_info(), drm_dp_downstream_max_clock(), drm_dp_downstream_max_bpc()) Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-14-lyude@redhat.com
2020-08-31drm/i915/dp: Extract drm_dp_read_mst_cap()Lyude Paul
Just a tiny drive-by cleanup, we can consolidate i915's code for checking for MST support into a helper to be shared across drivers. v5: * Drop !!() * Move drm_dp_has_mst() out of header * Change name from drm_dp_has_mst() to drm_dp_read_mst_cap() Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Sean Paul <sean@poorly.run> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826182456.322681-10-lyude@redhat.com
2020-08-27drm/i915/display: Disable DRRS when needed in fastsetsJosé Roberto de Souza
Changes in the configuration could cause PSR to be compatible and enabled so driver must also be able to disable DRRS when doing fastsets. v2: Fixed name of DRRS compute function (Anshuman) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/173 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/209 Cc: Srinivas K <srinivasx.k@intel.com> Cc: Hariom Pandey <hariom.pandey@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200825171331.17971-2-jose.souza@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 00:50:34 +0000