summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/gma500/psb_intel_display.c
AgeCommit message (Collapse)Author
2020-02-13drm/gma500: Convert to CRTC VBLANK callbacksThomas Zimmermann
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert gma500 over. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-7-tzimmermann@suse.de
2019-11-07drm/gma500: Add page flip support on psb/cdvPaul Kocialkowski
Legacy (non-atomic) page flip support is added to the driver by using the mode_set_base CRTC function, that allows configuring a new framebuffer for display. Since the function requires the primary plane's fb to be set already, this is done prior to calling the function in the page flip helper and reverted if the flip fails. The vblank interrupt handler is also refactored to support passing an event. The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield only, as explained in psb_enable_vblank. It was tested by running weston on both poulsbo and cedartrail. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-3-paul.kocialkowski@bootlin.com
2019-06-19Merge v5.2-rc5 into drm-nextDaniel Vetter
Maarten needs -rc4 backmerged so he can pull in the fbcon notifier removal topic branch into drm-misc-next. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22drm/gma500: drop drmp.h include from all .c filesSam Ravnborg
Drop remaining uses of the deprecated drmP.h in gma500 Replaced drmp.h with forward declarations or include files as relevant. Moved all include files to blocks in following order: \#include <linux/*> \#include <asm/*> \#include <drm/*> \#include "" And within each block sort the include files alphabetically. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190519195526.3422-6-sam@ravnborg.org
2017-08-04drm: gma500: remove dead code and pointless local lut storagePeter Rosin
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-9-peda@axentia.se
2016-05-31drm: Initialize a linear gamma table by defaultDaniel Vetter
Code stolen from gma500. This is just a minor bit of safety code that I spotted and figured it might be useful if we put it into the core. This is to make the get_gamma ioctl reflect likely reality even before the first set_gamma ioctl call. v2 on irc: Extend commit message per Maarten's suggestions. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-2-git-send-email-daniel.vetter@ffwll.ch
2016-03-04drm/gma: removed optional dummy crtc mode_fixup function.Carlos Palminha
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-08drm/gma500: Move to private save/restore hooksDaniel Vetter
I want to remove the core ones since with atomic drivers system suspend/resume is solved much differently. And there's only 2 drivers (nouveau besides gma500) really using them. v2: Fixup build noise 0day reported. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-13-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com> (v1)
2015-04-07drm/gma500: constify all struct drm_*_helper funcs pointersJani Nikula
They are not to be modified. Generated using the semantic patch: @@ @@ ( const struct drm_crtc_helper_funcs * | - struct drm_crtc_helper_funcs * + const struct drm_crtc_helper_funcs * ) @@ @@ ( const struct drm_encoder_helper_funcs * | - struct drm_encoder_helper_funcs * + const struct drm_encoder_helper_funcs * ) @@ @@ ( const struct drm_connector_helper_funcs * | - struct drm_connector_helper_funcs * + const struct drm_connector_helper_funcs * ) @@ @@ ( const struct drm_plane_helper_funcs * | - struct drm_plane_helper_funcs * + const struct drm_plane_helper_funcs * ) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.hDaniel Vetter
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-03-17drm/gma500: Add backing type and base align to psb_gem_create()Patrik Jakobsson
We'll need this for our gem create ioctl in a later patch. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2014-03-17drm/gma500: Remove unused ioctlsPatrik Jakobsson
All of these ioctls are unused and most of them just duplicate what drm already provides. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-06drm/gma500: Return -ENOENT when a mode object can't be foundVille Syrjälä
Let's be a bit more consistent with our error values. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-24drm/gma500: Rename psb_intel_encoder to gma_encoderPatrik Jakobsson
The psb_intel_encoder is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_connector to gma_connectorPatrik Jakobsson
The psb_intel_connector is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_crtc to gma_crtcPatrik Jakobsson
The psb_intel_crtc is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to generic set_config()Patrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to generic save/restorePatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic encoder funcsPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to generic cursor funcsPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to generic crtc->destroyPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to gma_crtc_dpms()Patrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic gamma funcsPatrik Jakobsson
This takes care of the remaining chips using the old generic code. We don't check if the pipe number is valid but the old code peeked in the register map before checking anyways so just ignore it. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Convert to gma_pipe_set_base()Patrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Use identical generic crtc funcsPatrik Jakobsson
This patch makes psb use the gma_xxx counterparts that are identical. I took them in one sweep as they should not cause any regressions. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Make all chips use gma_wait_for_vblankPatrik Jakobsson
Also remove the duplicated oaktrail function. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/psb: Make use of generic clock codePatrik Jakobsson
Add chip specific callbacks for the generic and non-generic clock calculation code. Also remove as much dupilicated code as possible. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Add generic code for clock calculationPatrik Jakobsson
This patch aims to unify the bits and pieces that are common (or similar enough) for pll clock calculations. Nothing makes use of this code yet That will come in later patches. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-09drm/gma500/psb: Fix cursor gem obj referencing on psbPatrik Jakobsson
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Poulsbo chips. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-06-09drm/gma500/psb: Unpin framebuffer on crtc disablePatrik Jakobsson
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-03-17drm/gma500: Clean up various definesPatrik Jakobsson
Remove unused defines that we'll never use and fix naming in some include guards Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-03-17drm/gma500: Remove unnecessary function exposurePatrik Jakobsson
psb_intel_crtc_gamma_set() and psb_intel_crtc_destroy() aren't used outside of psb_intel_display.c right now so no need to expose them. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-03-17drm/gma500: Type clock limits directly into array and remove definesPatrik Jakobsson
This makes it easier to read. We do the same for cdv so it becomes more consistent as well. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-03-17drm/gma500: Calculate clock in one function instead of three identicalPatrik Jakobsson
i9xx_clock() and i8xx_clock() did the same calc and psb_intel_clock() just called i9xx_clock() so just move it all into psb_intel_clock(). The same calculation is duplicated in cdv_intel_display.c as well so maybe we can share it later on. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-03-17drm/gma500: Remove unused i8xx clock limitsPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-02-22gma500: Fix n, m1 and m2 clock limits for sdvo and lvdsPatrik Jakobsson
The values of n, m1 and m2 needs to be subtracted by 2 before writing them to the FP register. The dot clock calculation already thinks of these values in register form so we must also specify them as such. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30gma500: Consider CRTC initially active.Forest Bond
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19drm: Make the .mode_fixup() operations mode argument a const pointerLaurent Pinchart
The passed mode must not be modified by the operation, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-22gma500: handle poulsbo cursor restrictionPatrik Jakobsson
Poulsbo needs a physical address in the cursor base register. We allocate a stolen memory buffer and copy the cursor image provided by userspace into it. When/If we get our own userspace driver we can map this stolen memory directly. The patch also adds a mark in chip ops so we can identify devices that has this requirement. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-11gma500: use the register map to clean upAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-11gma500: introduce a structure describing each pipeAlan Cox
This starts the move away from lots of confused unions of per driver stuff inherited when we merged the drivers together. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: psb_intel_display: drop unused variablesKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: mark psb_intel_pipe_set_base() as staticKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: drop unused psb_intel_modeset_cleanup()Kirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: rework register stuff sanelyAlan Cox
Rework registers handling to prepare for Medfield. Signed-off-by: Alan Cox <alan@linux.intel.com> [split out from a single big patch] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: now move the Oaktrail save state into its own structureAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20gma500: Replace SDVO code with slightly modified version from i915Patrik Jakobsson
Our current SDVO implementation is not working properly, so replace it with a modified version of the i915. Further testing and debugging is needed to make sure we can handle the different SDVO setups and wiring. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20gma500: Fix encoder type checking for connectorsPatrik Jakobsson
Fix cases where we need to know what encoder type is behind a given connector. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 15:18:39 +0000