summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/exynos/exynos_drm_plane.c
AgeCommit message (Collapse)Author
2015-06-20drm/exynos: atomic phase 2: wire up state reset(), duplicate() and destroy()Gustavo Padovan
Set CRTC, planes and connectors to use the default implementations from the atomic helper library. The helpers will work to keep track of state for each DRM object. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: use adjusted_mode of crtc_state instead of modeJoonyoung Shim
Handle changes by removing copy from adjusted_mode to mode as using adjusted_mode of crtc_state. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 1: use drm_plane_helper_disable()Gustavo Padovan
The atomic helper to disable planes also uses the optional .atomic_disable() helper. The unique operation it does is calling .win_disable() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-06-20drm/exynos: atomic phase 1: use drm_plane_helper_update()Gustavo Padovan
Rip out the check from exynos_update_plane() and create exynos_check_plane() for the check phase enabling use to use the atomic helpers to call our check and update phases when updating planes. Update all users of exynos_update_plane() accordingly to call exynos_check_plane() before. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-05-19drm/exynos: plane: honor buffer offset for dma_addrTobias Jakobi
Previously we were ignoring the buffer offsets that are passed through the addfb2 ioctl. This didn't cause any major issues, since for uni-planar formats (like XRGB8888) userspace would most of the time just use offsets[0]=0. However with NV12 offsets[1] is very likely non-zero. So properly apply the offsets to our dma addresses. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: add ratio calculationJoonyoung Shim
Calculation ratio from exynos_drm plane codes, then each hw drivers can use it without extra operation. Also this fixes width and height of source used for actual crtc shown via screen. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: use src_x and src_y instead of fb_x and fb_yJoonyoung Shim
It's more reasonable to use src_x and src_y to represent source as counterpart of destination(crtc). Already we are using src_width and src_height for width and height of source. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: remove exynos_plane_destroy()Gustavo Padovan
The .destroy() callback for exynos can be replaced by drm_plane_cleanup(). The only extra operation on exynos_plane_destroy() was a call to exynos_plane_disable() but the plane is already disabled by a earlier call to drm_framebuffer_remove(). Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: make zpos property immutableGustavo Padovan
We already set each plane zpos at init, after that changes to zpos are not expected. This patch turns zpos into a read-only property so now it is impossible to set zpos. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: preset zpos value for overlay planesGustavo Padovan
Usually userspace don't want to have two overlay planes on the same zpos so this change assign a different zpos for each plane. Before this change a zpos of value zero was created for all planes so the userspace had to set up the zpos of every plane it wanted to use. Also all places that were storing zpos positions are now unsigned int. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: remove struct *_win_data abstraction on planesGustavo Padovan
struct {fimd,mixer,vidi}_win_data was just keeping the same data as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane directly. It changes how planes are created and remove .win_mode_set() callback that was only filling all *_win_data structs. v2: check for return of exynos_plane_init() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-18drm/exynos: Check for NULL dereference of crtcCharles Keepax
The commit "drm/exynos: remove exynos_plane_dpms" (d9ea6256) removed the use of the enabled flag, which means that the code may attempt to call win_enable on a NULL crtc. This results in the following oops on Arndale: [ 1.673479] Unable to handle kernel NULL pointer dereference at virtual address 00000368 [ 1.681500] pgd = c0004000 [ 1.684154] [00000368] *pgd=00000000 [ 1.687713] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 1.693012] Modules linked in: [ 1.696045] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.19.0-07545-g57485fa #1907 [ 1.703524] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (....) [ 2.014803] [<c02f9cfc>] (exynos_plane_destroy) from [<c02e61b4>] (drm_mode_config_cleanup+0x168/0x20c) [ 2.024178] [<c02e61b4>] (drm_mode_config_cleanup) from [<c02f66fc>] (exynos_drm_load+0xac/0x12c) This patch adds in a check to ensure exynos_crtc is not NULL before it is dereferenced. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-13Merge branch 'exynos-drm-next' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summary: - Add code cleanups and bug fixups. - Add a new display controller dirver, DECON which is a new display controller of Exynos7 SoC. This device is much different from FIMD of Exynos4 and Exynos4 SoC series. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Add DECON driver drm/exynos: fix NULL pointer reference drm/exynos: remove exynos_plane_dpms drm/exynos: remove mode property of exynos crtc drm/exynos: Remove exynos_plane_dpms() call with no effect drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage drm/exynos: hdmi: replace fb size with mode size from win commit drm/exynos: fix no hdmi output drm/exynos: use driver internal struct drm/exynos: fix wrong pipe calculation for crtc drm/exynos: remove to use unnecessary MODULE_xxx macro drm/exynos: remove DRM_EXYNOS_DMABUF config drm/exynos: IOMMU support should not be selectable by user drm/exynos: add support for 'hdmi' clock
2015-02-11Merge tag 'topic/drm-misc-2015-02-06' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Flushing out my drm-misc queue with a few oddball things all over. * tag 'topic/drm-misc-2015-02-06' of git://anongit.freedesktop.org/drm-intel: drm: Use static attribute groups for managing connector sysfs entries drm: remove DRM_FORMAT_NV12MT drm/modes: Print the mode status in human readable form drm/irq: Don't disable vblank interrupts when already disabled
2015-02-09drm/exynos: remove exynos_plane_dpmsJoonyoung Shim
The exynos_plane_dpms function handles enabled flag of exynos plane and calls internal hw driver callback function for hw overlay on/off. But it causes state disharmory problem currently and is will be obstacle to apply atomic operation later to keep non-standard per-plane dpms state like enabled flag. Let's remove enabled flag, it just stop to recall internal callback function but hw drivers can handle it properly. And call internal callback function directly then we can remove unnecessary exynos_plane_dpms function Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-04drm: remove DRM_FORMAT_NV12MTDaniel Vetter
So this has been merged originally in commit 83052d4d5cd518332440bb4ee63d68bb5f744e0f Author: Seung-Woo Kim <sw0312.kim@samsung.com> Date: Thu Dec 15 15:40:55 2011 +0900 drm: Add multi buffer plane pixel formats which hasn't seen a lot of review really. The problem is that it's not a real pixel format, but just a different way to lay out NV12 pixels in macroblocks, i.e. a tiling format. The new way of doing this is with the soon-to-be-merged fb modifiers. This was brough up in some long irc discussion around the entire topic, as an example of where things have gone wrong. Luckily we can correct the mistake: - The kms side support for NV12MT is all dead code because format_check in drm_crtc.c never accepted NV12MT. - The gem side for the gsc support doesn't look better: The code forgets to set the pixel format and makes a big mess with the tiling mode bits, inadvertedly setting them all. Conclusion: This never really worked (at least not in upstream) and hence we can safely correct our mistake here. Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Rob Clark <robclark@freedesktop.org> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Rob Clark <robclark@freedesktop.org> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-01-25drm/exynos: create exynos_check_plane()Gustavo Padovan
Split update plane in two parts, an initial check part that can fail and the update part that can't fail. This is a important step for the upcoming atomic modesetting support. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: remove struct exynos_drm_managerGustavo Padovan
exynos_drm_manager was just a redundant struct to represent the crtc as well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to remove an unnecessary level of indirection easing the understand of the flow on exynos. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: unify plane update on exynos_update_plane()Gustavo Padovan
We can safely use the exynos_update_plane() to update the plane framebuffer for both the overlay and primary planes. Note that this patch removes a call to manager->ops->commit() in exynos_drm_crtc_mode_set_commit(). The commit() call is used only by the fimd driver to set underlying timings and need only in full modeset operations. For plane update only win_commit is needed. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: remove exynos_plane_commit() wrapperGustavo Padovan
It's doing nothing but calling exynos_crtc->ops->win_commit(), so let's call this directly to avoid extra layers of abstraction. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: Don't touch DPMS when updating overlay planesGustavo Padovan
DPMS settings should only be changed by a full modeset. exynos_plane_update() should only care about updating the planes itself and nothing else. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: remove struct exynos_drm_overlayGustavo Padovan
struct exynos_drm_overlay has no practical advantage nor serves as important piece of the exynos API design. The only place it was used was inside the struct exynos_plane which was just causing a extra access overhead. Users had to access the overlay first and just then get the plane information it contains. This patch merges struct exynos_drm_overlay into struct exynos_plane. It also renames struct exynos_plane to struct exynos_drm_plane. The rational is to cut one step to access plane information. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-01-25drm/exynos: remove exynos_drm_crtc_plane_* wrappersGustavo Padovan
This functions were doing nothing but calling a manager op function, so remove them and call the manager directly. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-09-20drm/exynos: switch to universal plane APIAndrzej Hajda
The patch replaces legacy functions drm_plane_init() / drm_crtc_init() with drm_universal_plane_init() and drm_crtc_init_with_planes(). It allows to replace fake primary plane with the real one. Additionally the patch leaves cleanup of crtcs to core, this way planes and crtcs are cleaned in correct order. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-28drm/exynos: Replace DRM_LOG_KMS() by DRM_DEBUG_KMS()Lespiau, Damien
There are only a few users of the DRM_LOG_KMS() macro. We can simplify the DRM code a bit by replacing them by DRM_DEBUG_KMS(). Cc: Inki Dae <inki.dae@samsung.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24drm/exynos: Split manager/display/subdrvSean Paul
This patch splits display and manager from subdrv. The result is that crtc functions can directly call into manager callbacks and encoder functions can directly call into display callbacks. This will allow us to remove the exynos_drm_hdmi shim and support mixer/hdmi & fimd/dp with common code. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24drm/exynos: Use unsigned long for possible_crtcsSean Paul
Change all instances of possible_crtcs in the exynos drm driver to be unsigned long. This matches the type used in the drm layer. Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05drm/exynos: Remove redundant error messagesSachin Kamat
kzalloc already has built-in error messages. Hence remove additional ones. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-09-05drm/exynos: Add missing includesMark Brown
Ensure that all externally accessed functions are correctly prototyped when defined in each file by making sure the headers with the protoypes are included in the file with the definition. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-06-28drm/exynos: Remove tracking log functionsYoungJun Cho
This patch removes tracking log functions which were used to debug in the early development stage and are not so important as were. So remove them for code clean up. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-14drm/exynos: fix fb offset calculation for planeJoonyoung Shim
There is no any reason to change fb offset when CRTC is out of screen. Also, this fixes a typing error. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-12-13drm/exynos: remove unused vaddr memberYoungJun Cho
This patch removes vaddr member from exynos_drm_overlay structure and also relevant codes for code cleanup. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-29drm/exynos: remove unnecessary code.Inki Dae
plane->fb will be set to new fb after update_plane callback is called by drm_mode_set_plane() Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-07Merge branch 'exynos-drm-next' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-samsung into drm-next Inki writes: "this patch set updates exynos drm framework and includes minor fixups. and this pull request except hdmi device tree support patch set posted by Rahul Sharma because that includes media side patch so for this patch set, we may have git pull one more time in addition, if we get an agreement with media guys. for this patch, you can refer to below link, http://comments.gmane.org/gmane.comp.video.dri.devel/74504 this pull request adds hdmi device tree support and includes related patch set such as disabling of hdmi internal interrupt, suppport for platform variants for hdmi and mixer, support to disable video processor based on platform type and removal of drm common platform data. as you know, this patch set was delayed because it included an media side patch. so for this, we got an ack from v4l2-based hdmi driver author, Tomasz Stanislawski." * 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung: (34 commits) drm: exynos: hdmi: remove drm common hdmi platform data struct drm: exynos: hdmi: add support for exynos5 hdmi drm: exynos: hdmi: replace is_v13 with version check in hdmi drm: exynos: hdmi: add support for exynos5 mixer drm: exynos: hdmi: add support to disable video processor in mixer drm: exynos: hdmi: add support for platform variants for mixer drm: exynos: hdmi: add support for exynos5 hdmiphy drm: exynos: hdmi: add support for exynos5 ddc drm: exynos: remove drm hdmi platform data struct drm: exynos: hdmi: turn off HPD interrupt in HDMI chip drm: exynos: hdmi: use s5p-hdmi platform data drm: exynos: hdmi: fix interrupt handling drm: exynos: hdmi: support for platform variants media: s5p-hdmi: add HPD GPIO to platform data drm/exynos: fix kcalloc size of g2d cmdlist node drm/exynos: fix to calculate CRTC shown via screen drm/exynos: fix display power call issue. drm/exynos: add platform_device_id table and driver data for drm fimd drm/exynos: Fix potential NULL pointer dereference drm/exynos: support drm_wait_vblank feature for VIDI ... Conflicts: include/drm/exynos_drm.h
2012-10-04drm/exynos: fix to calculate CRTC shown via screenJoonyoung Shim
This patch is to exactly calculate CRTC shown via screen for all cases. Refer exynos_plane_get_size() function for this. Also source position of fb is fixed when start position of CRTC is negative number. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-10-04drm/exynos: check NV12M format specific to Exynos properlyInki Dae
this patch adds buf_cnt variable in exynos_drm_fb structure and that means a buffer count to drm framebuffer and also adds two functions to get/set the buffer count from/to exynos_drm_fb structure. if pixel format is not DRM_FORMAT_NV12MT then it gets a buffer count to drm framebuffer refering to mode_cmd->handles and offsets. but when booted, the buffer count will always be 1 because pixel format of console framebuffer is RGB format. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-10-02UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/David Howells
Convert #include "..." to #include <path/...> in drivers/gpu/. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-09-13drm/exynos: remove DRM_FORMAT_NV12M from plane moduleInki Dae
this patch removes DRM_FORMAT_NV12M from plane module because this format is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by mode_cmd->handles and mode_cmd->offsets fields internally. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
2012-07-27drm/exynos: add plane enable/disableJoonyoung Shim
The plane enable/disable can control only a power of plane, so they will be helpful to handle planes with dpms. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27drm/exynos: add property for plane zposJoonyoung Shim
The exynos drm driver used a specific ioctl - DRM_EXYNOS_PLANE_SET_ZPOS to set zpos of plane. It can be substitute to property of plane. This patch adds a property for plane zpos and removes DRM_EXYNOS_PLANE_SET_ZPOS ioctl. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27drm/exynos: update overlay via plane from crtcJoonyoung Shim
There is no any reason to update overlay at crtc directly because the crtc uses plane. Move its code to plane and call proper functions of plane from crtc. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27drm/exynos: use private plane for crtcJoonyoung Shim
The crtc can use private plane instead it has overlay struct. It will be helpful use plane feature from crtc later. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-07-27drm/exynos: define to_exynos_plane macroJoonyoung Shim
Add macro to get struct exynos_plane from struct drm_plane pointer. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-05-17drm/exynos: added source size to overlay structureSeung-Woo Kim
Set plane has source size but exynos overlay structure did not consider it. This patch adds source size to overlay structure. For set crtc, source size is set from crtc size. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-04-05drm/exynos: add format list of planeSeung-Woo Kim
NV12, NV12M and NV12MT are added to format list of plane to use these formats for hdmi vp layer. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-03-20drm/exynos: add default pixel format for planeEunchul Kim
DRM checks whether the plane supports a pixel format of fb when plane is updated. This adds a default pixel format supporting format exynos drm plane. Signed-off-by: Eunchul Kim <chulspro.kim@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-05drm: add support for private planesRob Clark
In cases where the scanout hw is sufficiently similar between "overlay" and traditional crtc layers, it might be convenient to allow the driver to create internal drm_plane helper objects used by the drm_crtc implementation, rather than duplicate code between the plane and crtc. A private plane is not exposed to userspace. Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-21drm/exynos: Add plane support with fimdJoonyoung Shim
The exynos fimd supports 5 window overlays. Only one window overlay of fimd is used by the crtc, so we need plane feature to use the rest window overlays. This creates one ioctl exynos specific - DRM_EXYNOS_PLANE_SET_ZPOS, it is the ioctl to decide for user to assign which window overlay. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 05:14:57 +0000