summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2023-01-19drm: bridge: ldb: Warn if LDB clock does not match requested link frequencyAlexander Stein
The LDB clock needs to be exactly 7-times the pixel clock used by the display. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221208065538.1753666-1-alexander.stein@ew.tq-group.com
2023-01-19drm/bridge: sii902x: Use dev_err_probeAlexander Stein
This helps figuring out why the device probe is deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230117105903.2068235-1-alexander.stein@ew.tq-group.com
2023-01-19drm/bridge: sii902x: Allow reset line to be tied to a sleepy GPIO controllerWadim Egorov
Switch to gpiod_set_value_cansleep() in sii902x_reset(). This is relevant if the reset line is tied to a I2C GPIO controller. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221228145704.939801-1-w.egorov@phytec.de
2023-01-18drm/bridge: lt9611: properly program the dual host modeDmitry Baryshkov
If the bridge is connected using both DSI ports, the driver should use both of them all the time. Correct programming sequence to always use dual-port mode if both dsi0 and dsi1 are connected. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-14-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: stop filtering modes via the tableDmitry Baryshkov
The lt9611 bridge can support different modes, it makes no sense to list them in the table. Drop the table and check the number of interfaces using the fixed value. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-13-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: rework infoframes handlingDmitry Baryshkov
Rework handling infoframes: - Write full HDMI AVI infoframe instead of just fixing the VIC value - Also send the HDMI Vendor Specific infoframe, as recommended by the HDMI spec. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-12-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: simplify video timings programmingDmitry Baryshkov
Inline calculated values to simplify the calculation in lt9611_mipi_video_setup(). Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-11-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix sync polarity for DVI outputDmitry Baryshkov
Attaching DVI sink to the lt9611 requires different setup. Fix the register write to make the DVI displays sync onto the correct sync pulse. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-10-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: attach to the next bridgeDmitry Baryshkov
The bindings require that there is a next bridge after the lt9611. If nothing else it can be the hdmi-connector (as used on the RB3 platform, see sdm845-db845c.dts). Bring in the next bridge into the drm bridges chain and attach to it. Since lt9611 is not anymore the last bridge in the chain, this also allows us to drop all the !DRM_BRIDGE_ATTACH_NO_CONNECTOR functionality. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-9-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: rework the mode_set functionDmitry Baryshkov
The mode_set callback is deprectated for drm_bridges in favour of using atomic_enable callback. Move corresponding code into the function lt9611_bridge_atomic_enable() and turn lt9611_bridge_pre_enable() into the proper atomic_pre_enable callback. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-8-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: pass a pointer to the of nodeDmitry Baryshkov
Pass a pointer to the OF node while registering lt9611 MIPI device. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix clock calculationDmitry Baryshkov
Instead of having several fixed values for the pcr register, calculate it before programming. This allows the bridge to support most of the display modes. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix programming of video modesDmitry Baryshkov
Program the upper part of the hfront_porch into the proper register. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix polarity programmingDmitry Baryshkov
Fix programming of hsync and vsync polarities Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix HPD reenablementDmitry Baryshkov
The driver will reset the bridge in the atomic_pre_enable(). However this will also drop the HPD interrupt state. Instead of resetting the bridge, properly wake it up. This fixes the HPD interrupt delivery after the disable/enable cycle. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: lt9611: fix sleep mode setupDmitry Baryshkov
On atomic_post_disable the bridge goes to the low power state. However the code disables too much of the chip, so the HPD event is not being detected and delivered to the host. Reduce the power saving in order to get the HPD event. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org
2023-01-18drm/bridge: Remove unnecessary include statements for drm_crtc_helper.hThomas Zimmermann
Several source files include drm_crtc_helper.h without needing it or only to get its transitive include statements; leading to unnecessary compile-time dependencies. Drop drm_crtc_helper.h where possible. v2: * update commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-8-tzimmermann@suse.de
2023-01-17drm/bridge: cdns-dsi: Add support for J721E wrapperRahul T R
Add support for wrapper settings for DSI bridge on j721e. Also enable DPI0 --------------- ----------------------- | -------| |------- | | DSS | DPI2 |----->| DPI0 | DSI Wrapper | | -------| |------- | --------------- ----------------------- As shown above DPI2 output of DSS is connected to DPI0 input of DSI Wrapper, DSI wrapper gives control wheather to enable/disable DPI0 input. In j721e above is the only configuration supported Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Create a header fileRahul T R
Create a header file for cdns dsi and move structure definations to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-5-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Move to drm/bridge/cadenceRahul T R
Move the cadence dsi bridge under drm/bridge/cadence directory, to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
2023-01-16drm/bridge: tc358767: Set default CLRSIPO countMarek Vasut
The current CLRSIPO count is still marginal and does not work with high DSI clock rates in burst mode. Increase it further to allow the DSI link to work at up to 1Gbps lane speed. This returns the counts to defaults as provided by datasheet. Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-05drm/bridge: panel: Prevent ERR_PTR DereferenceMaxime Ripard
Commit 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel") introduced an access to the bridge pointer in the devm_drm_panel_bridge_add_typed() function. However, due to the unusual ERR_PTR check when getting that pointer, the pointer access is done even though the pointer might be an error pointer. Rework the function for a more traditional design that will return immediately if it gets an ERR_PTR so that we never access the pointer in that case. Fixes: 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230102120123.19062-1-maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20230102120123.19062-1-maxime@cerno.tech
2023-01-04Merge tag 'drm-misc-next-2023-01-03' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * connector: Support analog-TV mode property * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI, MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI Cross-subsystem Changes: * dma-buf: Documentation fixes * i2c: Introduce i2c_client_get_device_id() helper Core Changes: * Improve support for analog TV output * bridge: Remove unused drm_bridge_chain functions * debugfs: Add per-device helpers and convert various DRM drivers * dp-mst: Various fixes * fbdev emulation: Always pick 32 bpp as default * KUnit: Add tests for managed helpers; Various cleanups * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 * TTM: Open-code ttm_bo_wait() and remove the helper Driver Changes: * Fix preferred depth and bpp values throughout DRM drivers * Remove #CONFIG_PM guards throughout DRM drivers * ast: Various fixes * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505: Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip, Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640: Use atomic bridge functions * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously during atomic update * ili9486: Support 16-bit pixel data * imx: Split off IPUv3 driver; Various fixes * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i Support separate I/O-voltage supply * mxsfb: Depend on ARCH_MXS or ARCH_MXC * omapdrm: Various fixes * panel: Use ktime_get_boottime() to measure power-down delay in various drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a: Add support * sprd: Cleanups * sun4i: Convert to new TV-mode property * tidss: Various fixes * v3d: Various fixes * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups; dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to bridge * virtio: Improve tracing * vkms: Support small cursors in IGT tests; Various fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
2023-01-02drm/bridge: panel: Set pre_enable_prev_first from drmm_panel_bridge_addDave Stevenson
Commit 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel") added code to copy prepare_prev_first from drm_panel to pre_enable_prev_first in drm_bridge when called through devm_panel_bridge_add, but missed drmm_panel_bridge_add. Add the same code to drmm_panel_bridge_add. Fixes: 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221222185213.3773336-1-dave.stevenson@raspberrypi.com
2022-12-21Merge tag 'pwm/for-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes across the board, mostly improvements and cleanups" * tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits) pwm: pca9685: Convert to i2c's .probe_new() pwm: sun4i: Propagate errors in .get_state() to the caller pwm: Handle .get_state() failures pwm: sprd: Propagate errors in .get_state() to the caller pwm: rockchip: Propagate errors in .get_state() to the caller pwm: mtk-disp: Propagate errors in .get_state() to the caller pwm: imx27: Propagate errors in .get_state() to the caller pwm: cros-ec: Propagate errors in .get_state() to the caller pwm: crc: Propagate errors in .get_state() to the caller leds: qcom-lpg: Propagate errors in .get_state() to the caller drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller pwm/tracing: Also record trace events for failed API calls pwm: Make .get_state() callback return an error code pwm: pxa: Enable for MMP platform pwm: pxa: Add reference manual link and limitations pwm: pxa: Use abrupt shutdown mode pwm: pxa: Remove clk enable/disable from pxa_pwm_config pwm: pxa: Set duty cycle to 0 when disabling PWM pwm: pxa: Remove pxa_pwm_enable/disable pwm: mediatek: Add support for MT7986 ...
2022-12-16drm: bridge: it66121: Add support for the IT6610Paul Cercueil
Add support for the IT6610 HDMI encoder. The hardware is very similar, and therefore the driver did not require too many changes. Some bits are only available on the IT66121, and vice-versa. Also, the IT6610 requires specific polarities on the DE and pixel lines. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214130131.12962-1-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Move VID/PID to new it66121_chip_info structurePaul Cercueil
This will make it easier later to introduce support for new chips in this driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214130122.12911-1-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Set DDC preamble only once before reading EDIDPaul Cercueil
The DDC preamble and target address only need to be set once before reading the EDID, even if multiple segments have to be read. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-9-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Don't clear DDC FIFO twicePaul Cercueil
The DDC FIFO was cleared before the loop in it66121_get_edid_block(), and at the beginning of each iteration; which means that it did not have to be cleared before the loop. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-8-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Don't use DDC error IRQsPaul Cercueil
The DDC error IRQs will fire on the IT6610 every time the FIFO is empty, which is not very helpful. To resolve this, we can simply disable them, and handle DDC errors in it66121_wait_ddc_ready(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-7-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Fix wait for DDC readyPaul Cercueil
The function it66121_wait_ddc_ready() would previously read the status register until "true", which means it never actually polled anything and would just read the register once. Now, it will properly wait until the DDC hardware is ready or until it reported an error. The 'busy' variable was also renamed to 'error' since these bits are set on error and not when the DDC hardware is busy. Since the DDC ready function is now working properly, the msleep(20) can be removed. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-6-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Write AVI infoframe with regmap_bulk_write()Paul Cercueil
Since all AVI infoframe registers are contiguous in the address space, the AVI infoframe can be written in one go with regmap_bulk_write(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-5-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Use regmap_noinc_read()Paul Cercueil
Use regmap_noinc_read() instead of reading the data from the DDC FIFO one byte at a time. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-4-paul@crapouillou.net
2022-12-16drm: bridge: it66121: Use devm_regulator_bulk_get_enable()Paul Cercueil
Simplify the code of the driver by using devm_regulator_bulk_get_enable(), which will handle powering up the regulators, and disabling them on probe error or module removal. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-3-paul@crapouillou.net
2022-12-15drm/bridge: add it6505 driver to read data-lanes and link-frequencies from dtallen chen
Add driver to read data-lanes and link-frequencies from dt property to restrict output bandwidth. Signed-off-by: allen chen <allen.chen@ite.com.tw> Signed-off-by: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-2-allen.chen@ite.com.tw Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw
2022-12-15drm/bridge: it6505: Add caching for EDIDPin-yen Lin
Add caching when EDID is read, and invalidate the cache until the bridge detects HPD low or sink count changes on HPD_IRQ. It takes 1.2s for IT6505 bridge to read a 3-block EDID, and skipping one EDID read would be a notable difference on user experience. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221115112720.911158-1-treapking@chromium.org
2022-12-15drm/bridge: lt9611: Fix PLL being unable to lockRobert Foss
This fixes PLL being unable to lock, and is derived from an equivalent downstream commit. Available LT9611 documentation does not list this register, neither does LT9611UXC (which is a different chip). This commit has been confirmed to fix HDMI output on DragonBoard 845c. Suggested-by: Amit Pundir <amit.pundir@linaro.org> Reviewed-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org
2022-12-14drm/bridge: it6505: Guard bridge power in IRQ handlerPin-yen Lin
Add a pair of pm_runtime_get_if_in_use and pm_runtime_put_sync in the interrupt handler to make sure the bridge won't be powered off during the interrupt handlings. Also remove the irq_lock mutex because it's not guarding anything now. Fixes: ab28896f1a83 ("drm/bridge: it6505: Improve synchronization between extcon subsystem") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221109095227.3320919-1-treapking@chromium.org
2022-12-13Merge tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "The biggest highlight is that the accel subsystem framework is merged. Hopefully for 6.3 we will be able to line up a driver to use it. In drivers land, i915 enables DG2 support by default now, and nouveau has a big stability refactoring and initial ampere support, AMD includes new hw IP support and should build on ARM again. There is also an ofdrm driver to take over offb on platforms it's used. Stuff outside my tree, the dma-buf patches hit a few places, the vc4 firmware changes also do, and i915 has some interactions with MEI for discrete GPUs. I think all of those should have been acked/reviewed by relevant parties. New driver: - ofdrm - replacement for offb fbdev: - add support for nomodeset fourcc: - add Vivante tiled modifier core: - atomic-helpers: CRTC primary plane test fixes, fb access hooks - connector: TV API consistency, cmdline parser improvements - send connector hotplug on cleanup - sort makefile objects tests: - sort kunit tests - improve DP-MST tests - add kunit helpers to create a device sched: - module param for scheduling policy - refcounting fix buddy: - add back random seed log ttm: - convert ttm_resource to size_t - optimize pool allocations edid: - HFVSDB parsing support fixes - logging/debug improvements - DSC quirks dma-buf: - Add unlocked vmap and attachment mapping - move drivers to common locking convention - locking improvements firmware: - new API for rPI firmware and vc4 xilinx: - zynqmp: displayport bridge support - dpsub fix bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support, sync improvements - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C panel: - panel-edp: Add INX N116BGE-EA2 C2 and C4 support. - Jadard JD9365DA-H3 - NewVision NV3051D amdgpu: - DCN support on ARM - DCN 2.1 secure display - Sienna Cichlid mode2 reset fixes - new GC 11.x firmware versions - drop AMD specific DSC workarounds in favour of drm code - clang warning fixes - scheduler rework - SR-IOV fixes - GPUVM locking fixes - fix memory leak in CS IOCTL error path - flexible array updates - enable new GC/PSP/SMU/NBIO IP - GFX preemption support for gfx9 amdkfd: - cache size fixes - userptr fixes - enable cooperative launch on gfx 10.3 - enable GC 11.0.4 KFD support radeon: - replace kmap with kmap_local_page - ACPI ref count fix - HDA audio notifier support i915: - DG2 enabled by default - MTL enablement work - hotplug refactoring - VBT improvements - Display and watermark refactoring - ADL-P workaround - temp disable runtime_pm for discrete- - fix for A380 as a secondary GPU - Wa_18017747507 for DG2 - CS timestamp support fixes for gen5 and earlier - never purge busy TTM objects - use i915_sg_dma_sizes for all backends - demote GuC kernel contexts to normal priority - gvt: refactor for new MDEV interface - enable DC power states on eDP ports - fix gen 2/3 workarounds nouveau: - fix page fault handling - Ampere acceleration support - driver stability improvements - nva3 backlight support msm: - MSM_INFO_GET_FLAGS support - DPU: XR30 and P010 image formats - Qualcomm SM6115 support - DSI PHY support for QCM2290 - HDMI: refactored dev init path - remove exclusive-fence hack - fix speed-bin detection - enable clamp to idle on 7c3 - improved hangcheck detection vmwgfx: - fb and cursor refactoring - convert to generic hashtable - cursor improvements etnaviv: - hw workarounds - softpin MMU fixes ast: - atomic gamma LUT support - convert to SHMEM lcdif: - support YUV planes - Increase DMA burst size - FIFO threshold tuning meson: - fix return type of cvbs mode_valid mgag200: - fix PLL setup on some revisions sun4i: - A100 and D1 support udl: - modesetting improvements - hot unplug support vc4: - support PAL-M - fix regression preventing 4K @ 60Hz - fix NULL ptr deref v3d: - switch to drm managed resources renesas: - RZ/G2L DSI support - DU Kconfig cleanup mediatek: - fixup dpi and hdmi - MT8188 dpi support - MT8195 AFBC support tegra: - NVDEC hardware on Tegra234 SoC hdlcd: - switch to drm managed resources ingenic: - fix registration error path hisilicon: - convert to drm_mode_init maildp: - use managed resources mtk: - use drm_mode_init rockchip: - use drm_mode_copy" * tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits) drm/amdgpu: fix mmhub register base coding error drm/amdgpu: add tmz support for GC IP v11.0.4 drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4 drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4 drm/amdgpu: enable GFX IP v11.0.4 CG support drm/amdgpu: Make amdgpu_ring_mux functions as static drm/amdgpu: generally allow over-commit during BO allocation drm/amd/display: fix array index out of bound error in DCN32 DML drm/amd/display: 3.2.215 drm/amd/display: set optimized required for comp buf changes drm/amd/display: Add debug option to skip PSR CRTC disable drm/amd/display: correct DML calc error of UrgentLatency drm/amd/display: correct static_screen_event_mask drm/amd/display: Ensure commit_streams returns the DC return code drm/amd/display: read invalid ddc pin status cause engine busy drm/amd/display: Bypass DET swath fill check for max clocks drm/amd/display: Disable uclk pstate for subvp pipes drm/amd/display: Fix DCN2.1 default DSC clocks drm/amd/display: Enable dp_hdmi21_pcon support drm/amd/display: prevent seamless boot on displays that don't have the preferred dig ...
2022-12-12drm/bridge: anx7625: keep last configure timingXin Ji
Sometimes kernel may resume back quickly after suspend, and DRM not call .mode_set() to re-config display timing before calling .atomic_enable(), bridge driver with this patch to keep last configure timing. Signed-off-by: Xin Ji <xji@analogixsemi.com> Acked-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221209030418.713935-1-xji@analogixsemi.com
2022-12-12drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-36-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-12drm/bridge: parade-ps8622: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-29-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-12drm/bridge: adv7511: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-15-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge: tfp410: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-38-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge/tc358775: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-35-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge: tc358768: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-34-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge: tc358767: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-33-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge: sii8620: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-32-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2022-12-09drm/bridge: sii9234: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-31-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 12:57:50 +0000