summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2018-02-16drm/bridge/synopsys: dw-hdmi: Export some PHY related functionsJernej Skrabec
Parts of PHY code could be useful also for custom PHYs. For example, Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY with few additional memory mapped registers, so most of the Synopsys PHY related code could be reused. Functions exported here are actually not specific to Synopsys PHYs but to DWC HDMI controller PHY interface. This means that even if the PHY is completely custom, i.e. not designed by Synopsys, exported functions can be useful. Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net
2018-02-16drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32aJernej Skrabec
Allwinner SoCs have dw hdmi controller v1.32a which exhibits same magenta line issue as i.MX6Q and i.MX6DL. Enable workaround for it. Tests show that one iteration is enough. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-4-jernej.skrabec@siol.net
2018-02-08drm/bridge/synopsys: dsi: Add 1.31 version supportPhilippe Cornu
Add support for the Synopsys DesignWare MIPI DSI version 1.31 Two registers need to be updated/added for supporting 1.31: * PHY_TMR_CFG 0x9c (updated) 1.30 [31:24] phy_hs2lp_time [23:16] phy_lp2hs_time [14: 0] max_rd_time 1.31 [25:16] phy_hs2lp_time [ 9: 0] phy_lp2hs_time * PHY_TMR_RD_CFG 0xf4 (new) 1.31 [14: 0] max_rd_time Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180206084251.303-1-philippe.cornu@st.com
2018-02-08drm/bridge/synopsys: dsi: Add read featurePhilippe Cornu
This patch adds the DCS/GENERIC DSI read feature. Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180204213104.17834-1-philippe.cornu@st.com
2018-01-30drm/bridge/synopsys: dsi: Fix dsi_host_transfer() return valuePhilippe Cornu
The dw_mipi_dsi_host_transfer() must return the number of bytes transmitted/received on success instead of 0. Note: As the read feature is not implemented, only the transmitted number of bytes is returned for the moment. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-3-philippe.cornu@st.com
2018-01-30drm/bridge/synopsys: dsi: Add a warning msg on dsi read requestsPhilippe Cornu
The dcs/generic dsi read feature is not yet implemented so it is important to warn the host_transfer() caller in case of read operation requests. Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-2-philippe.cornu@st.com
2018-01-19Merge airlied/drm-next into drm-misc-nextSean Paul
It's been a while since we've backmerged drm-next. Dave just brought back 4.15-rc8, so now's a good time to freshen things up around here. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-01-18drm/bridge: analogix-anx78xx: Remove duplicate NULL checkAndy Shevchenko
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-6-andriy.shevchenko@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-01-16drm/bridge/synopsys: dsi: handle endianness correctly in dw_mipi_dsi_write()Brian Norris
We're filling the "remainder" word with little-endian data, then writing it out to IO registers with endian-correcting writel(). That probably won't work on big-endian systems. Let's mark the "remainder" variable as LE32 (since we fill it with memcpy()) and do the swapping explicitly. Some of this function could be done more easily without memcpy(), but the unaligned "remainder" case is a little hard to do without potentially overrunning 'tx_buf', so I just applied the same solution in all cases (memcpy() + le32_to_cpu()). Tested only on a little-endian system. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org
2018-01-16drm/bridge/synopsys: dsi: use common mipi_dsi_create_packet()Brian Norris
This takes care of 2 TODOs in this driver, by using the common DSI packet-marshalling code instead of our custom short/long write code. This both saves us some duplicated code and gets us free support for command types that weren't already part of our switch block (e.g., MIPI_DSI_GENERIC_LONG_WRITE). The code logic stays mostly intact, except that it becomes unnecessary to split the short/long write functions, and we have to copy data a bit more. Along the way, I noticed that loop bounds were a little odd: while (DIV_ROUND_UP(len, pld_data_bytes)) This really was just supposed to be 'len != 0', so I made that more clear. Tested on RK3399 with some pending refactoring patches by Nickey Yang, to make the Rockchip DSI driver wrap this common driver. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-1-briannorris@chromium.org
2018-01-16drm/bridge/synopsys: dsi: make dw_mipi_dsi_bridge_mode_set() staticBrian Norris
sparse complains: drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol 'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static? Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203319.139520-1-briannorris@chromium.org
2018-01-12drm/bridge: Add timing support to dumb VGA DACLinus Walleij
This extends the dumb VGA DAC bridge to handle the THS8134A and THS8134B VGA DACs in addition to those already handled. We assign the proper timing data to the pointer inside the bridge struct so display controllers that need to align their timings to the bridge can pick it up and work from there. Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-3-linus.walleij@linaro.org
2018-01-09drm/bridge/synopsys: stop clobbering drvdataBrian Norris
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a parent driver might need to own this. Instead, let's return our 'dw_mipi_dsi' object and have callers pass that back to us for removal. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org
2018-01-09drm/bridge: analogix: Remove unreachable code from analogic_dp_core.cSylwester Nawrocki
This patch removes an unreachable code found by the SVACE static analysis: UNREACHABLE_CODE: This statement in the source code might be unreachable during program execution. [unreachable] unreachable at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:787 retval != 0 is always false because at this program point the variable retval is always equal to 0 at drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:786 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171212112037.13107-1-s.nawrocki@samsung.com
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-07drm/bridge: analogix dp: Fix runtime PM state in get_modes() callbackMarek Szyprowski
get_modes() callback might be called asynchronously from the DRM core and it is not synchronized with bridge_enable(), which sets proper runtime PM state of the main DP device. Fix this by calling pm_runtime_get_sync() before calling drm_get_edid(), which in turn calls drm_dp_i2c_xfer() and analogix_dp_transfer() to ensure that main DP device is runtime active when doing any access to its registers. This fixes the following kernel issue on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 62 Comm: kworker/0:2 Not tainted 4.13.0-rc2-00364-g4a97a3da420b #3357 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events output_poll_execute task: edc14800 task.stack: edcb2000 PC is at analogix_dp_transfer+0x15c/0x2fc LR is at analogix_dp_transfer+0x134/0x2fc pc : [<c0468538>] lr : [<c0468510>] psr: 60000013 sp : edcb3be8 ip : 0000002a fp : 00000001 r10: 00000000 r9 : edcb3cd8 r8 : edcb3c40 r7 : 00000000 r6 : edd3b380 r5 : edd3b010 r4 : 00000064 r3 : 00000000 r2 : f0ad3000 r1 : edcb3c40 r0 : edd3b010 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4000406a DAC: 00000051 Process kworker/0:2 (pid: 62, stack limit = 0xedcb2210) Stack: (0xedcb3be8 to 0xedcb4000) [<c0468538>] (analogix_dp_transfer) from [<c0424ba4>] (drm_dp_i2c_do_msg+0x8c/0x2b4) [<c0424ba4>] (drm_dp_i2c_do_msg) from [<c0424e64>] (drm_dp_i2c_xfer+0x98/0x214) [<c0424e64>] (drm_dp_i2c_xfer) from [<c057b2d8>] (__i2c_transfer+0x140/0x29c) [<c057b2d8>] (__i2c_transfer) from [<c057b4a4>] (i2c_transfer+0x70/0xe4) [<c057b4a4>] (i2c_transfer) from [<c0441de4>] (drm_do_probe_ddc_edid+0xb4/0x114) [<c0441de4>] (drm_do_probe_ddc_edid) from [<c0441e5c>] (drm_probe_ddc+0x18/0x28) [<c0441e5c>] (drm_probe_ddc) from [<c0445728>] (drm_get_edid+0x124/0x2d4) [<c0445728>] (drm_get_edid) from [<c0465ea0>] (analogix_dp_get_modes+0x90/0x114) [<c0465ea0>] (analogix_dp_get_modes) from [<c0425e8c>] (drm_helper_probe_single_connector_modes+0x198/0x68c) [<c0425e8c>] (drm_helper_probe_single_connector_modes) from [<c04325d4>] (drm_setup_crtcs+0x1b4/0xd18) [<c04325d4>] (drm_setup_crtcs) from [<c04344a8>] (drm_fb_helper_hotplug_event+0x94/0xd0) [<c04344a8>] (drm_fb_helper_hotplug_event) from [<c0425a50>] (drm_kms_helper_hotplug_event+0x24/0x28) [<c0425a50>] (drm_kms_helper_hotplug_event) from [<c04263ec>] (output_poll_execute+0x6c/0x174) [<c04263ec>] (output_poll_execute) from [<c0136f18>] (process_one_work+0x188/0x3fc) [<c0136f18>] (process_one_work) from [<c01371f4>] (worker_thread+0x30/0x4b8) [<c01371f4>] (worker_thread) from [<c013daf8>] (kthread+0x128/0x164) [<c013daf8>] (kthread) from [<c0108510>] (ret_from_fork+0x14/0x24) Code: 0a000002 ea000009 e2544001 0a00004a (e59537c8) ---[ end trace cddc7919c79f7878 ]--- Reported-by: Misha Komarovskiy <zombah@gmail.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171121074936.22520-1-m.szyprowski@samsung.com
2017-12-04Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
2017-11-30drm/bridge: tc358767: add copyright linesAndrey Gusakov
Add copyright lines for Zodiac who paid for driver development. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Acked-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-8-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix 1-lane behaviorAndrey Gusakov
Use drm_dp_channel_eq_ok helper Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-7-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix AUXDATAn registers accessAndrey Gusakov
First four bytes should go to DP0_AUXWDATA0. Due to bug if len > 4 first four bytes was writen to DP0_AUXWDATA1 and all data get shifted by 4 bytes. Fix it. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-6-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix timing calculationsAndrey Gusakov
Fields in HTIM01 and HTIM02 regs should be even. Recomended thresh_dly value is max_tu_symbol. Remove set of VPCTRL0.VSDELAY as it is related to DSI input interface. Currently driver supports only DPI. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-5-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: fix DP0_MISC register setAndrey Gusakov
Remove shift from TU_SIZE_RECOMMENDED define as it used to calculate max_tu_symbols. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-4-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: filter out too high modesAndrey Gusakov
Pixel clock limitation for DPI is 154 MHz. Do not accept modes with higher pixel clock rate. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-3-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: tc358767: do no fail on hi-res displaysAndrey Gusakov
Do not fail data rates higher than 2.7 and more than 2 lanes. Try to fall back to 2.7Gbps and 2 lanes. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510073785-16108-2-git-send-email-andrey.gusakov@cogentembedded.com
2017-11-30drm/bridge: Fix lvds-encoder since the panel_bridge rework.Eric Anholt
The panel_bridge bridge attaches to the panel's OF node, not the lvds-encoder's node. Put in a little no-op bridge of our own so that our consumers can still find a bridge where they expect. This also fixes an unintended unregistration and leak of the panel-bridge on module remove. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bri dge.") Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171114191647.22207-1-eric@anholt.net
2017-11-30drm/bridge: synopsys/dw-hdmi: Enable cec clockPierre-Hugues Husson
Support the "cec" optional clock. The documentation already mentions "cec" optional clock and it is used by several boards, but currently the driver doesn't enable it, thus preventing cec from working on those boards. And even worse: a /dev/cecX device will appear for those boards, but it won't be functioning without configuring this clock. Changes: v4: - Change commit message to stress the importance of this patch v3: - Drop useless braces v2: - Separate ENOENT errors from others - Propagate other errors (especially -EPROBE_DEFER) Signed-off-by: Pierre-Hugues Husson <phh@phh.me> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me
2017-11-30drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handlingHans Verkuil
If the device tree for a board did not specify a cec clock, then adv7511_cec_init would return an error, which would cause adv7511_probe() to fail and thus there is no HDMI output. There is no need to have adv7511_probe() fail if the CEC initialization fails, so just change adv7511_cec_init() to a void function. In addition, adv7511_cec_init() should just return silently if the cec clock isn't found and show a message for any other errors. An otherwise correct cleanup patch from Dan Carpenter turned this broken failure handling into a kernel Oops, so bisection points to commit 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") rather than 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support"). Based on earlier patches from Arnd and John. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Link: https://bugs.linaro.org/show_bug.cgi?id=3345 Link: https://lkft.validation.linaro.org/scheduler/job/48017#L3551 Fixes: 7af35b0addbc ("drm/kirin: Checking for IS_ERR() instead of NULL") Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/9097b2a4-b6b9-5fca-e039-0a17694b1143@xs4all.nl
2017-11-22drm/edid: Allow HDMI infoframe without VIC or S3DVille Syrjälä
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from 3D to 2D mode in a timely fashion if the source simply stops sending the HDMI infoframe. The suggested workaround is to keep sending the infoframe even when strictly not necessary (ie. no VIC and no S3D). HDMI 1.4 does allow for this behaviour, stating that sending the infoframe is optional in this case. The infoframe was first specified in HDMI 1.4, so in theory sinks predating that may not appreciate us sending an uknown infoframe their way. To avoid regressions let's try to determine if the sink supports the infoframe or not. Unfortunately there's no direct way to do that, so instead we'll just check if we managed to parse any HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the sink will accept the infoframe. Also if the EDID contains the HDMI 2.0 HDMI Forum VSDB we can assume the sink is prepared to receive the infoframe. v2: Fix getting has_hdmi_infoframe from display_info Always fail constructing the infoframe if the display possibly can't handle it Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
2017-11-16drm/bridge/sii8620: add DVI mode supportMaciej Purski
If the sink device is in HDMI mode, enable infoframe interrupt in scdt irq handle function else call start_video function immediately, because in DVI mode, there is no infoframe interrupt provided. Rename start_hdmi function to start_video and get rid of the old start_video function. In start_video, if the sink is DVI and mode is MHL1 or MHl2, write appropriate values to registers else the path should remain the same as in HDMI mode. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510224822-7732-1-git-send-email-m.purski@samsung.com
2017-11-16drm/bridge/sii8620: filter unsupported modesMarek Szyprowski
The maximum pixel clock depends on the version of the connected MHL adapter. Add mode_valid callback to filter out modes with too high pixel clock to avoid failure in mode_fixup later. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109102831.19844-1-m.szyprowski@samsung.com
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-07drm/drivers: drop redundant drm_edid_to_eld() callsJani Nikula
drm_add_edid_modes() now fills in the ELD automatically, so the calls to drm_edid_to_eld() are redundant. Remove them. All the other places are obvious, but nv50 has detached drm_edid_to_eld() from the drm_add_edid_modes() call. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0959ca02b983afc9e74dd9acd190ba6e25f21678.1509545641.git.jani.nikula@intel.com
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18drm/bridge: adv7511: Fix a use after freeDan Carpenter
We free "edid", then use it again on the next line. Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171017204343.zctliubjkq7imudi@mwanda
2017-10-11drm/bridge/sii8620: add remote control supportMaciej Purski
MHL specification defines Remote Control Protocol(RCP) to send input events between MHL devices. The driver now recognizes RCP messages and reacts to them by reporting key events to input subsystem, allowing a user to control a device using TV remote control. Signed-off-by: Maciej Purski <m.purski@samsung.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
2017-10-10drm/bridge/synopsys: dsi :remove is_panel_bridgebenjamin.gaignard@linaro.org
When using drm_of_panel_bridge_remove() we can simplify the code and remove is_panel_bridge from dw_mipi_dsi structure. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-6-git-send-email-benjamin.gaignard@linaro.org
2017-10-10drm/bridge: make drm_panel_bridge_remove more robustbenjamin.gaignard@linaro.org
Make sure that bridge parameter is not NULL and can be safely cast into a panel_bridge structure. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1506936755-23625-2-git-send-email-benjamin.gaignard@linaro.org
2017-10-09drm: adv7511/33: add HDMI CEC supportHans Verkuil
Add support for HDMI CEC to the drm adv7511/adv7533 drivers. The CEC registers that we need to use are identical for both drivers, but they appear at different offsets in the register map. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171007104658.14528-3-hverkuil@xs4all.nl
2017-10-06drm/bridge: add Silicon Image SiI9234 driverMaciej Purski
SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0. It is controlled via I2C bus. Its interaction with other devices in video pipeline is performed mainly on HW level. The only interaction it does on device driver level is filtering-out unsupported video modes, it exposes drm_bridge interface to perform this operation. This patch is based on the code refactored by Tomasz Stanislawski <t.stanislaws@samsung.com>, which was initially developed by: Adam Hampson <ahampson@sta.samsung.com> Erik Gilling <konkers@android.com> Shankar Bandal <shankar.b@samsung.com> Dharam Kumar <dharam.kr@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> [for dt bindings] Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com
2017-09-28Merge tag 'drm-misc-next-2017-09-20' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...
2017-09-16drm/bridge: adv7511: Constify HDMI CODEC platform dataLars-Peter Clausen
The HDMI codec platform data is global driver state shared by all instances. As such it should not be modified (and is not), to make this explicit declare it as const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-4-lars@metafoo.de
2017-09-16drm/bridge: adv7511: Enable connector polling when no interrupt is specifiedLars-Peter Clausen
Fall back to polling the connector for connect and disconnect events when no interrupt is specified. Otherwise these events will not be noticed and monitor hotplug does not work. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-3-lars@metafoo.de
2017-09-16drm/bridge: adv7511: Remove private copy of the EDIDLars-Peter Clausen
The adv7511 driver keeps a private copy of the EDID in its driver state struct. But this copy is only used in adv7511_get_modes() where it is also retrieved, so there is no need to keep this extra copy around. If a need to access the EDID elsewhere in the driver ever arises the copy that is stored in the connector can be used. This copy is accessible through drm_connector_get_edid(). Note, this patch removes the NULL check of the EDID before passing it to drm_detect_hdmi_monitor(), but that is fine since the function correctly handles the case where the EDID is NULL. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-2-lars@metafoo.de
2017-09-16drm/bridge: adv7511: Properly update EDID when no EDID was foundLars-Peter Clausen
Currently adv7511_get_modes() bails out early when no EDID could be retrieved. This leaves the previous EDID in place, which is typically not the intended behavior and might confuse applications. Instead the EDID should be cleared when no EDID could be retrieved. All functions that are called after the EDID check handle the case where the EDID is NULL just fine and exhibit the expected behavior, so just drop the check. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-1-lars@metafoo.de
2017-09-04drm/bridge/synopsys: dsi: explicitly request exclusive reset controlPhilippe CORNU
Based on patch "Convert drivers to explicit reset API" from Philipp Zabel Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philippe CORNU <philippe.cornu@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1501593788-21036-4-git-send-email-philippe.cornu@st.com
2017-09-04drm/bridge/synopsys: dsi: Register list clean upPhilippe CORNU
This patch cleans up the Synopsys mipi dsi register list: - rename registers according to the Synopsys documentation (1.30 & 1.31) - fix typos - re-order registers for a better coherency Signed-off-by: Philippe CORNU <philippe.cornu@st.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/1501593788-21036-3-git-send-email-philippe.cornu@st.com
2017-09-03Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.14 merge window. I'm sending this early, as my continuing journey into fatherhood is occurring really soon now, I'm going to be mostly useless for the next couple of weeks, though I may be able to read email, I doubt I'll be doing much patch applications or git sending. If anything urgent pops up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards you. Outside drm changes: Some rcar-du updates that touch the V4L tree, all acks should be in place. It adds one export to the radix tree code for new i915 use case. There are some minor AGP cleanups (don't see that too often). Changes to the vbox driver in staging to avoid breaking compilation. Summary: core: - Atomic helper fixes - Atomic UAPI fixes - Add YCBCR 4:2:0 support - Drop set_busid hook - Refactor fb_helper locking - Remove a bunch of internal APIs - Add a bunch of better default handlers - Format modifier/blob plane property added - More internal header refactoring - Make more internal API names consistent - Enhanced syncobj APIs (wait/signal/reset/create signalled) bridge: - Add Synopsys Designware MIPI DSI host bridge driver tiny: - Add Pervasive Displays RePaper displays - Add support for LEGO MINDSTORMS EV3 LCD i915: - Lots of GEN10/CNL support patches - drm syncobj support - Skylake+ watermark refactoring - GVT vGPU 48-bit ppgtt support - GVT performance improvements - NOA change ioctl - CCS (color compression) scanout support - GPU reset improvements amdgpu: - Initial hugepage support - BO migration logic rework - Vega10 improvements - Powerplay fixes - Stop reprogramming the MC - Fixes for ACP audio on stoney - SR-IOV fixes/improvements - Command submission overhead improvements amdkfd: - Non-dGPU upstreaming patches - Scratch VA ioctl - Image tiling modes - Update PM4 headers for new firmware - Drop all BUG_ONs. nouveau: - GP108 modesetting support. - Disable MSI on big endian. vmwgfx: - Add fence fd support. msm: - Runtime PM improvements exynos: - NV12MT support - Refactor KMS drivers imx-drm: - Lock scanout channel to improve memory bw - Cleanups etnaviv: - GEM object population fixes tegra: - Prep work for Tegra186 support - PRIME mmap support sunxi: - HDMI support improvements - HDMI CEC support omapdrm: - HDMI hotplug IRQ support - Big driver cleanup - OMAP5 DSI support rcar-du: - vblank fixes - VSP1 updates arcgpu: - Minor fixes stm: - Add STM32 DSI controller driver dw_hdmi: - Add support for Rockchip RK3399 - HDMI CEC support atmel-hlcdc: - Add 8-bit color support vc4: - Atomic fixes - New ioctl to attach a label to a buffer object - HDMI CEC support - Allow userspace to dictate rendering order on submit ioctl" * tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits) drm/syncobj: Add a signal ioctl (v3) drm/syncobj: Add a reset ioctl (v3) drm/syncobj: Add a syncobj_array_find helper drm/syncobj: Allow wait for submit and signal behavior (v5) drm/syncobj: Add a CREATE_SIGNALED flag drm/syncobj: Add a callback mechanism for replace_fence (v3) drm/syncobj: add sync obj wait interface. (v8) i915: Use drm_syncobj_fence_get drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2) drm/syncobj: Rename fence_get to find_fence drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate drm/vmwgfx: Bump the version for fence FD support drm/vmwgfx: Add export fence to file descriptor support drm/vmwgfx: Add support for imported Fence File Descriptor drm/vmwgfx: Prepare to support fence fd drm/vmwgfx: Fix incorrect command header offset at restart drm/vmwgfx: Support the NOP_ERROR command drm/vmwgfx: Restart command buffers after errors drm/vmwgfx: Move irq bottom half processing to threads drm/vmwgfx: Don't use drm_irq_[un]install ...
2017-08-24drm/bridge/sii8620: Fix memory corruptionMaciej Purski
Function sii8620_mt_read_devcap_reg_recv() used to read array index from a wrong msg register, which caused writing out of array bounds. It led to writing on other fields of struct sii8620. Signed-off-by: Maciej Purski <m.purski@samsung.com> Fixes: e9c6da270 ("drm/bridge/sii8620: add reading device capability registers") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503311571-25819-1-git-send-email-m.purski@samsung.com
2017-08-17Merge tag 'drm-misc-next-2017-08-16' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ...
2017-08-15Backmerge tag 'v4.13-rc5' into drm-nextDave Airlie
Linux 4.13-rc5 There's a really nasty nouveau collision, hopefully someone can take a look once I pushed this out.
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:35:07 +0000