summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/ast
AgeCommit message (Collapse)Author
2025-02-03drm/ast: Add support_fullhd flag to struct ast_deviceThomas Zimmermann
Detect support for 1920x1080 (FullHD) in ast_detect_widescreen(). The flag is cleared by default. The test logic has been taken from existing code in ast_crtc_helper_mode_valid(). The code in that function is being replaced by the new flag. For Gen3, a new branch duplicates the Gen2 logic and adds a test for AST2200. Gen2 adds a test for AST2100. v2: - use fullhd flag for setting max width/height Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-6-tzimmermann@suse.de
2025-02-03drm/ast: Reorganize widescreen test around hardware GensThomas Zimmermann
Testing for support of widescreen modes mixes up various hardware Gens. First branch by hardware Gen, then do specific tests for each Gen. By default, widesscreen support is disabled. Later patches will add more specific tests for each Gen. v2: - move shared detection code into helper (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-5-tzimmermann@suse.de
2025-02-03drm/ast: Rename support_wide_screen to support_wsxga_pThomas Zimmermann
The flag support_wide_screen in struct ast_device selects devices that support resolutions of at least 1680x1050 (WSXGA+). Name it accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-4-tzimmermann@suse.de
2025-02-03drm/ast: Align naming in widescreen detection code to manualThomas Zimmermann
Rename variables and register constants to align with the programming manual. Add new constants where necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-3-tzimmermann@suse.de
2025-02-03drm/ast: Remove 1152x864 from list of widescreen resolutionsThomas Zimmermann
The resolution 1152x864 has a ratio of 4:3 and is already handled as such. Remove it from the list of widescreen resolutions. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131092257.115596-2-tzimmermann@suse.de
2025-01-29drm/ast: Fix ast_dp connection statusJocelyn Falempe
ast_dp_is_connected() used to also check for link training success to report the DP connector as connected. Without this check, the physical_status is always connected. So if no monitor is present, it will fail to read the EDID and set the default resolution to 640x480 instead of 1024x768. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jose Lopez <jose.lopez@hpe.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250124141142.2434138-1-jfalempe@redhat.com
2025-01-28drm/ast: astdp: Fix timeout for enabling video signalThomas Zimmermann
The ASTDP transmitter sometimes takes up to 1 second for enabling the video signal, while the timeout is only 200 msec. This results in a kernel error message. Increase the timeout to 1 second. An example of the error message is shown below. [ 697.084433] ------------[ cut here ]------------ [ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled)) [ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.415283] Call Trace: [ 697.420727] <TASK> [ 697.425908] ? show_trace_log_lvl+0x196/0x2c0 [ 697.433304] ? show_trace_log_lvl+0x196/0x2c0 [ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.458059] ? __warn.cold+0xaf/0xca [ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.472633] ? report_bug+0x134/0x1d0 [ 697.479544] ? handle_bug+0x58/0x90 [ 697.486127] ? exc_invalid_op+0x13/0x40 [ 697.492975] ? asm_exc_invalid_op+0x16/0x20 [ 697.500224] ? preempt_count_sub+0x14/0xc0 [ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90 [ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast] [ 697.550009] commit_tail+0xfe/0x1d0 [ 697.556547] drm_atomic_helper_commit+0x198/0x1c0 This is a cosmetical problem. Enabling the video signal still works even with the error message. The problem has always been present, but only recent versions of the ast driver warn about missing the timeout. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 4e29cc7c5c67 ("drm/ast: astdp: Replace ast_dp_set_on_off()") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.13+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250127134423.84266-1-tzimmermann@suse.de
2025-01-22drm/ast: Only warn about unsupported TX chips on Gen4 and laterThomas Zimmermann
Only Gen4 and later read the installed TX chip from the SoC. So only warn on those generations about unsupported chips. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-9-tzimmermann@suse.de
2025-01-22drm/ast: Merge TX-chip detection code for Gen4 and laterThomas Zimmermann
Gens 4 to 6 and Gen7 use the same pattern for detecting the installed TX chips. Merge the code into a single branch. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-8-tzimmermann@suse.de
2025-01-22drm/ast: Align Gen1 DVO detection to register manualThomas Zimmermann
Align variable names and register constants for TX-chip detection to the names in the register manual. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-7-tzimmermann@suse.de
2025-01-22drm/ast: Hide Gens 1 to 3 TX detection in branchThomas Zimmermann
Gen7 only supports ASTDP. Gens 4 to 6 support various TX chips, except ASTDP. These boards detect the TX chips by reading the SoC scratch register as VGACRD1. Gens 1 to 3 only support SIL164. These boards read the DVO bit from VGACRA3. Hence move this test behind a branch, so that it does not run on later generations. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-6-tzimmermann@suse.de
2025-01-22drm/ast: Initialize ASTDP in ast_post_gpu()Thomas Zimmermann
Remove the call to ast_dp_launch() from ast_detect_tx_chip() and perform it unconditionally in ast_post_gpu(). Also add error handling: the detection code apparently used ast_dp_launch() to test for a working ASTDP, falling back to VGA on errors. As the VBIOS reports ASTDP, silently ignoring errors is questionable behavior. With the refactoring, failing to initialize the ASTDP will also fail probing the driver. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-5-tzimmermann@suse.de
2025-01-22drm/ast: Refactor ast_post_gpu() by GenThomas Zimmermann
Reorganize ast_post_gpu() so that it first branches by Gen and then by config mode and TX chip. This will later make it possible to split up the function by Gen. The helper ast_init_3rdtx() only handles Gen4 and Gen5, so leave it out from the other Gens. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-4-tzimmermann@suse.de
2025-01-22drm/ast: Detect DRAM before TX-chipThomas Zimmermann
Move DRAM detection before TX-chip detection. Both steps are independent from each other. Detection of the TX-chip is now next to posting those chips, which can be done in a single step. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-3-tzimmermann@suse.de
2025-01-22drm/ast: Detect wide-screen support before creating modeset pipelineThomas Zimmermann
Wide-screen support is relevant for mode validation. Do not detect it before setting up the mode-setting pipeline. Gets the function call out of the way of other initialization code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117103450.28692-2-tzimmermann@suse.de
2024-12-05drm: remove driver date from struct drm_driver and all driversJani Nikula
We stopped using the driver initialized date in commit 7fb8af6798e8 ("drm: deprecate driver date") and (eventually) started returning "0" for drm_version ioctl instead. Finish the job, and remove the unused date member from struct drm_driver, its initialization from drivers, along with the common DRIVER_DATE macros. v2: Also update drivers/accel (kernel test robot) Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Simon Ser <contact@emersion.fr> Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-11-15drm/client: Move public client header to clients/ subdirectoryThomas Zimmermann
Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-11-04Backmerge v6.12-rc6 of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus tree for some drm-fixes needed for msm and xe merges. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-10-17drm/ast: vga: Clear EDID if no display is connectedThomas Zimmermann
Do not keep the obsolete EDID around after unplugging the display from the connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 2a2391f857cd ("drm/ast: vga: Transparently handle BMC support") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-3-tzimmermann@suse.de
2024-10-17drm/ast: sil164: Clear EDID if no display is connectedThomas Zimmermann
Do not keep the obsolete EDID around after unplugging the display from the connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: d20c2f846428 ("drm/ast: sil164: Transparently handle BMC support") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241015065113.11790-2-tzimmermann@suse.de
2024-10-14drm/ast: Use video aperture helpersThomas Zimmermann
DRM's aperture functions have long been implemented as helpers under drivers/video/ for use with fbdev. Avoid the DRM wrappers by calling the video functions directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-5-tzimmermann@suse.de
2024-09-30Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Get drm-misc-next to up v6.12-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-26drm/ast: Run DRM default client setupThomas Zimmermann
Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. The ast driver specifies a preferred color mode of 32. As this is the default if no format has been given, leave it out entirely. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-51-tzimmermann@suse.de
2024-09-23Merge tag 'pci-v6.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...
2024-09-18drm/ast: Warn about unsupported TX chipsThomas Zimmermann
A number of TX chips are listed in VGACRD1, but not supported by the ast driver. Whether any existing product uses such a chip is unknown. Warn if the driver encounters any. We can then add support as necessary. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240916082920.56234-4-tzimmermann@suse.de
2024-09-18drm/ast: Use TX-chip register constantsThomas Zimmermann
Replace magic values with named constants when reading the TX chip from VGACRD1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240916082920.56234-3-tzimmermann@suse.de
2024-09-18drm/ast: Rename register constants for TX-chip typesThomas Zimmermann
The type of the TX chip is provided in VGACRD1. Rename the constants accordingly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240916082920.56234-2-tzimmermann@suse.de
2024-09-13drm/ast: Avoid upcasting to struct ast_deviceThomas Zimmermann
Several functions receive an instance of struct drm_device only to upcast it to struct ast_device. Improve type safety by passing the AST device directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-11-tzimmermann@suse.de
2024-09-13drm/ast: Respect return value from CRTC initThomas Zimmermann
Return an error if CRTC initialization fails. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-10-tzimmermann@suse.de
2024-09-13drm/ast: vga: Inline ast_vga_connector_init()Thomas Zimmermann
Inline ast_vga_connector_init() into its only caller. The helper currently only does half of the connector-init work and is trivial enough to be inlined. While at it, remove the error message from the call to ast_ddc_create(). The function already warns on errors. Also set the local variables for encoder and connector as late as possible, so that the compiler warns if we use them before having initialized the instance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-9-tzimmermann@suse.de
2024-09-13drm/ast: sil164: Inline ast_sil164_connector_init()Thomas Zimmermann
Inline ast_sil164_connector_init() into its only caller. The helper currently only does half of the connector-init work and is trivial enough to be inlined. While at it, remove the error message from the call to ast_ddc_create(). The function already warns on errors. Also set the local variables for encoder and connector as late as possible, so that the compiler warns if we use them before having initialized the instance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-8-tzimmermann@suse.de
2024-09-13drm/ast: dp501: Avoid upcasting to struct ast_deviceThomas Zimmermann
Several functions receive an instance of struct drm_device only to upcast it to struct ast_device. Improve type safety by passing the AST device directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-7-tzimmermann@suse.de
2024-09-13drm/ast: dp501: Inline ast_dp501_connector_init()Thomas Zimmermann
Inline ast_dp501_connector_init() into its only caller. The helper currently only does half of the connector-init work and is trivial enough to be inlined. Also set the local variables for encoder and connector as late as possible, so that the compiler warns if we use them before having initialized the instance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-6-tzimmermann@suse.de
2024-09-13drm/ast: astdp: Replace ast_dp_set_on_off()Thomas Zimmermann
Replace ast_dp_set_on_off() with ast_dp_set_enable(). The helper's new name reflects the performed operation. If enabling fails, the new helper prints a warning. The code that waits for the programmed effect to take place is now located in __ast_dp_wait_enable(). Also align the register constants with the rest of the code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-5-tzimmermann@suse.de
2024-09-13drm/ast: astdp: Replace power_on helpersThomas Zimmermann
Replace the helper for controlling power on the physical connector, ast_dp_power_on_off(), with ast_dp_set_phy_sleep(). The new name reflects the effect of the operation. Simplify the implementation. The call now controls sleeping, hence semantics are inversed. Each 'on' becomes an 'off' operation and vice versa. Do the same for ast_dp_power_is_on() and also align naming of the register constant with the rest of the code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-4-tzimmermann@suse.de
2024-09-13drm/ast: astdp: Avoid upcasting to struct ast_deviceThomas Zimmermann
Several functions receive an instance of struct drm_device only to upcast it to struct ast_device. Improve type safety by passing the AST device directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-3-tzimmermann@suse.de
2024-09-13drm/ast: astdp: Inline ast_astdp_connector_init()Thomas Zimmermann
Inline ast_astdp_connector_init() into its only caller. The helper currently only does half of the connector-init work and is trivial enough to be inlined. Also set the local variables for encoder and connector as late as possible, so that the compiler warns if we use them before having initialized the instance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240911115347.899148-2-tzimmermann@suse.de
2024-09-11drm/ast: Remove TX-chip bitmaskThomas Zimmermann
The CRTC has only one output attached to it. Store the output's type of TX chip in a single field and remove the related bitmask. Turn the type-less output field in struct ast_device into a union, as only one of its fields will be used at a time. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240903132601.91618-1-tzimmermann@suse.de
2024-08-22drm/ast: Remove BMC outputThomas Zimmermann
Ast's BMC connector tracks the status of an underlying physical connector and updates the BMC status accordingly. This functionality works around GNOME's settings app, which cannot handle multiple outputs on the same CRTC. The workaround is now obsolete as all code for physical outputs handle BMC support internally. Hence, remove the driver's code and the BMC output entirely. v3: - remove struct ast_bmc_connector Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
2024-08-22drm/ast: vga: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
2024-08-22drm/ast: sil164: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
2024-08-22drm/ast: dp501: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
2024-08-22drm/ast: dp501: Use struct drm_edid and helpersThomas Zimmermann
Convert DP501 support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling. The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes. v2: - fix reading EDID data Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-8-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Simplify power management when detecting displayThomas Zimmermann
Remove the CRTC handling in the ASTDP detect_ctx helper and enable power while the detecting the display. Unconditionally wait a few milliseconds after switching power. Simplifies the code and makes it more robust. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-6-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Use struct drm_edid and helpersThomas Zimmermann
Convert ASTDP support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling. The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes. The device does not seem to support EDID extensions, as the driver actively clears any such information from the main EDID header. As the new interface allows for reading extension blocks for EDID, make sure that the block is always 0 (i.e., the main header). A later update might fix that. v2: - fix reading if len is not a multiple of 4 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Move locking into EDID helperThomas Zimmermann
The modeset mutex protects EDID retrival from concurrent modeset operations. Acquire the lock in ast_astdp_read_edid(). Prepares the code for conversion to struct drm_edid. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-4-tzimmermann@suse.de
2024-08-22drm/ast: Add struct ast_connectorThomas Zimmermann
Add struct ast_connector to track a connector's physical status. With the upcoming BMC support, the physical status can be different from the reported status. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-3-tzimmermann@suse.de
2024-08-22drm/ast: Move code for physical outputs into separate filesThomas Zimmermann
Move the modesetting code for the various transmitter chips into their own source files before adding BMC support. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-2-tzimmermann@suse.de
2024-08-13drm/ast: astdp: fix loop timeout checkDan Carpenter
This code has an issue because it loops until "i" is set to UINT_MAX but the test for failure assumes that "i" is set to zero. The result is that it will only print an error message if we succeed on the very last try. Reformat the loop to count forwards instead of backwards. Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba8da25-2d09-4924-a4ff-c0714bfbb192@stanley.mountain
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 10:49:04 +0000