summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/ast/ast_dp.c
AgeCommit message (Collapse)Author
2025-04-25drm/ast: Fix ast_dp connection statusJocelyn Falempe
commit c28f72c6ca98e039c2aa5aac6752c416bc31dbab upstream. ast_dp_is_connected() used to also check for link training success to report the DP connector as connected. Without this check, the physical_status is always connected. So if no monitor is present, it will fail to read the EDID and set the default resolution to 640x480 instead of 1024x768. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable") Reported-by: Jerry Hoemann <jerry.hoemann@hpe.com> Tested-by: Jose Lopez <jose.lopez@hpe.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.12+ Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20250124141142.2434138-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-22drm/ast: astdp: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Simplify power management when detecting displayThomas Zimmermann
Remove the CRTC handling in the ASTDP detect_ctx helper and enable power while the detecting the display. Unconditionally wait a few milliseconds after switching power. Simplifies the code and makes it more robust. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-6-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Use struct drm_edid and helpersThomas Zimmermann
Convert ASTDP support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling. The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes. The device does not seem to support EDID extensions, as the driver actively clears any such information from the main EDID header. As the new interface allows for reading extension blocks for EDID, make sure that the block is always 0 (i.e., the main header). A later update might fix that. v2: - fix reading if len is not a multiple of 4 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Move locking into EDID helperThomas Zimmermann
The modeset mutex protects EDID retrival from concurrent modeset operations. Acquire the lock in ast_astdp_read_edid(). Prepares the code for conversion to struct drm_edid. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-4-tzimmermann@suse.de
2024-08-22drm/ast: Add struct ast_connectorThomas Zimmermann
Add struct ast_connector to track a connector's physical status. With the upcoming BMC support, the physical status can be different from the reported status. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-3-tzimmermann@suse.de
2024-08-22drm/ast: Move code for physical outputs into separate filesThomas Zimmermann
Move the modesetting code for the various transmitter chips into their own source files before adding BMC support. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-2-tzimmermann@suse.de
2024-08-13drm/ast: astdp: fix loop timeout checkDan Carpenter
This code has an issue because it loops until "i" is set to UINT_MAX but the test for failure assumes that "i" is set to zero. The result is that it will only print an error message if we succeed on the very last try. Reformat the loop to count forwards instead of backwards. Fixes: 2281475168d2 ("drm/ast: astdp: Perform link training during atomic_enable") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1ba8da25-2d09-4924-a4ff-c0714bfbb192@stanley.mountain
2024-08-08Merge tag 'drm-misc-next-2024-08-01' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.12: UAPI Changes: virtio: - Define DRM capset Cross-subsystem Changes: dma-buf: - heaps: Clean up documentation printk: - Pass description to kmsg_dump() Core Changes: CI: - Update IGT tests - Point upstream repo to GitLab instance modesetting: - Introduce Power Saving Policy property for connectors - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support panic: - Avoid build-time interference with framebuffer console docs: - Document Colorspace property scheduler: - Remove full_recover from drm_sched_start TTM: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory Driver Changes: amdgpu: - Support Power Saving Policy connector property ast: - astdp: Support AST2600 with VGA; Clean up HPD bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable gma500: - Update i2c terminology ivpu: - Add MODULE_FIRMWARE() lcdif: - Fix pixel clock loongson: - Use GEM refcount over TTM's mgag200: - Improve BMC handling - Support VBLANK intterupts nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's panel: - Shutdown fixes plus documentation - Refactor several drivers for better code sharing - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing sti: - Fix module owner stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - Call drm_atomic_helper_shutdown() v3d: - Clean up perfmon vkms: - Clean up Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240801121406.GA102996@linux.fritz.box
2024-07-30drm/ast: astdp: Clean up EDID readingThomas Zimmermann
Simplify ast_astdp_read_edid(). Rename register constants. Drop unnecessary error handling. On success, the helper returns 0; an error code otherwise. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-6-tzimmermann@suse.de
2024-07-30drm/ast: astdp: Perform link training during atomic_enableThomas Zimmermann
The place for link training is in the encoder's atomic_enable helper. Remove all related tests from other helper ASTDP functions; especially ast_astdp_is_connected(), which tests HPD status. DP link training is controlled by the firmware. A status flag reports success or failure. The process can be fragile on Aspeed hardware. Moving the test from connector detection to the atomic_enable allows for several retries and a longer timeout. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-5-tzimmermann@suse.de
2024-07-30drm/ast: astdp: Only test HDP state in ast_astdp_is_connected()Thomas Zimmermann
The overall control flow of the driver ensures that it never reads EDID or sets display state on unconnected outputs. Therefore remove all tests for Hot Plug Detection from these helpers. Also rename the register constants. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-4-tzimmermann@suse.de
2024-07-30drm/ast: astdp: Test firmware status once during probingThomas Zimmermann
Test for running ASTDP firmware during probe. Do not bother testing this later. We cannot do much anyway if the firmware fails. Do not initialize the ASTDP conenctor if the test fails during device probing. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Shixiong Ou <oushixiong@kylinos.cn> Tested-by: Shixiong Ou <oushixiong@kylinos.cn> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-3-tzimmermann@suse.de
2024-07-30drm/ast: astdp: Wake up during connector status detectionThomas Zimmermann
Power up the ASTDP connector for connection status detection if the connector is not active. Keep it powered if a display is attached. This fixes a bug where the connector does not come back after disconnecting the display. The encoder's atomic_disable turns off power on the physical connector. Further HPD reads will fail, thus preventing the driver from detecting re-connected displays. For connectors that are actively used, only test the HPD flag without touching power. Fixes: f81bb0ac7872 ("drm/ast: report connection status on Display Port.") Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de
2024-04-05drm/ast: Fix soft lockupJammy Huang
There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Fixes: 594e9c04b586 ("drm/ast: Create the driver for ASPEED proprietory Display-Port") Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20240403090246.1495487-1-jammy_huang@aspeedtech.com
2023-10-19drm/ast: Rename AST_IO_CRTC_PORT to AST_IO_VGACRIThomas Zimmermann
Rename AST_IO_CRTC_PORT to AST_IO_VGACRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-10-tzimmermann@suse.de
2023-07-28drm/ast: report connection status on Display Port.Jocelyn Falempe
Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com
2023-05-31drm/ast: Fix long time waiting on s3/s4 resumeJammy Huang
In resume, DP's launch function, ast_dp_launch, could wait at most 30 seconds before timeout to check if DP is enabled. It could lead to 'DPM device timeout' and trigger unrecoverable kernel panic. To avoid this problem, we check if DP enable or not at driver probe only. Reported-and-tested-by: Wendy Wang <wendy.wang@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217278 Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230530041240.13427-1-jammy_huang@aspeedtech.com
2023-03-01drm/ast: Rename to_ast_private() to to_ast_device()Thomas Zimmermann
The helper to_ast_private() now upcasts to struct ast_device. Rename it accordingly. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-5-tzimmermann@suse.de
2023-03-01drm/ast: Rename struct ast_private to struct ast_deviceThomas Zimmermann
The data structure struct ast_private represents an AST device. Its name comes from the time when it was allocated and stored separately in struct drm_device.dev_private. The DRM device is now embedded, so rename struct ast_private to struct ast_device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-4-tzimmermann@suse.de
2022-06-24drm/ast: Fixed the casting issue reported by sparseKuoHsiang Chou
V1: 1.Fixed sparse:cast truncates bits form constant value ()cast truncates bits from constant value (ffffffffffffff00 becomes 0) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220623083116.35365-1-kuohsiang_chou@aspeedtech.com
2022-06-08drm/ast: Support multiple outputsThomas Zimmermann
Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
2022-05-03drm/ast: Create the driver for ASPEED proprietory Display-PortKuoHsiang Chou
V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com