summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2017-12-14drm/amd/display: Add dcc_change surface update flagAndrew Jiang
Program the DCC registers when dcc_change is true. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Implement work around for optc underflow.Yongqiang Sun
Work around for a hw bug causing optc underflow if blank data double buffer disable and remove mpcc. Checking optc status after otg unlock, after wait mpcc idle check status again, if optc underflow just happens after wait mpcc idle, clear underflow status and enable blank data double buffer. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Change optimized_required logicAndrew Jiang
Rather than setting it every time there's a full update with surface count > 0, set it when we need to do plane_atomic_disconnect. Also make sure that we unset the flag in plane_atomic_disable, so that in the event we run through a sequence where we do disconnect followed by an immediate disable, we do not do unnecessarily request a passive flip to do the optimization. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Add optimized_required flagHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Use same wait mpcc idle function.Yongqiang Sun
There is already wait mpcc idle function. It is better to use the same function for all wait mpcc idle. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: MPC updatesEric Bernstein
Fix update_mpcc logic to only call assert_mpcc_idle_before_connect if mpcc is not already being used (and required removal). Update set_out_rate_control to include optional flow control parameter. In init_mpcc_from_hw check for case where bot_sel is same as mpcc_id. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Fixed read wrong reg to get bot_sel.Yongqiang Sun
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Fix potential mem leak in DC constructHarry Wentland
Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn: possible memory leak of 'dc_ctx' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn: possible memory leak of 'dc_vbios' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn: possible memory leak of 'dcn_ip' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:506 construct() warn: possible memory leak of 'dcn_soc' Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Remove redundant checks in set_default_colorsHarry Wentland
pipe_ctx->stream and pipe_ctx->plane_state are never NULL Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2111 set_default_colors() error: we previously assumed 'pipe_ctx->stream' could be null (see line 2101) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Remove plane_res.mi check in dce110_apply_ctx_for_surfaceHarry Wentland
plane_res.mi (memory interface) can never be NULL for DCE110 Found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2881 dce110_apply_ctx_for_surface() error: we previously assumed 'pipe_ctx->plane_res.mi' could be null (see line 2873) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Remove PSR functions in LinuxHarry Wentland
NULL check issue found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:1976 dc_link_setup_psr() warn: variable dereferenced before check 'link' (see line 1970) We don't use these functions so might as well remove them. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Integrating MPC pseudocodeEric Bernstein
Integrating MPC pseudocode to support new blending cases with secondary MPCC list. This includes a design change to MPC data structures and interfaces. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: dal 3.1.21Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: try to find matching audio inst for enc inst firstCharlene Liu
[Description] in eDP+ HDMI/DP clone or extended configuration, audio inst changed from inst 1 to inst0. No failure related this though, just playback device endpoint inst changed. Also remove one addition register read. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: fix seq issue: turn on clock before programming afmt.Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Remove unnecessary wait mpcc idle.Yongqiang Sun
Before power gate plane, mpcc idle wait is processed, no need to wait another time. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/pp: reset dpm level when adjust power stateRex Zhu
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amd/pp: implement dpm_get_sclk/mclk for RVRex Zhu
RV implementation was missing these callbacks. Used to fetch the clock values for other components. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: fix huge page setting for ATS caseChunming Zhou
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: drop amdgpu_atombios_scratch_regs_save/restoreAlex Deucher
No longer used. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: drop scratch regs save and restore from GPU reset handlingAlex Deucher
The expectation is that the base driver doesn't mess with these. Some components interact with these directly so let the components handle these directly. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: drop scratch regs save and restore from S3/S4 handlingAlex Deucher
The expectation is that the base driver doesn't mess with these. Some components interact with these directly so let the components handle these directly. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: remove some old gc 9.x registersAlex Deucher
Leftover from bring up. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: drop soc15_init_golden_registersAlex Deucher
The golden register arrays were empty so the function was effectively useless. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: drop the bios scratch reg callbacks from nbioAlex Deucher
They are not used any longer. We get the scratch register locations from the vbios directly now. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-13drm/amdgpu: convert nbio to use callbacks (v2)Alex Deucher
Cleans up and consolidates all of the per-asic logic. v2: squash in "drm/amdgpu: fix NULL err for sriov detect" (Chunming) Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: make function names consistent in nbio filesAlex Deucher
All functions should have nbio_v* prefix. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: correct vce fw data and stack sizeFrank Min
this fix the VCE world switch hang issue Signed-off-by: Frank Min <Frank.Min@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: fix MAP_QUEUES paramterMonk Liu
Should be 0. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: no need with INT for fence pollingMonk Liu
We are polling so no need for INT. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: no need to evict VRAM in device_finiMonk Liu
this VRAM evict is not needed and also cost 2seconds to finish because the IRQ is software side disabled before it. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: allow get_vm_pde to change flags as wellChristian König
And also provide the level for which we need a PDE. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: batch PDE updates againChristian König
Now instead of one submission for each PDE batch them together over all PDs who need an update. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: remove keeping the addr of the VM PDsChristian König
No more double house keeping. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: remove last_entry_used from the VM codeChristian König
Not needed any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: avoid the modulo in amdgpu_vm_get_entryChristian König
We can do this with a simple mask as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: use polling mem to set SDMA3 wptr for VFPixel Ding
On Tonga VF, there're 2 sources updating wptr registers for sdma3: 1) polling mem and 2) doorbell. When doorbell and polling mem are both enabled on sdma3, there will be collision hit in occasion between those two sources when ucode and h/w are doing the updating on wptr register in parallel. Issue doesn't happen on CP GFX/Compute since CP drops all doorbell writes when VF is inactive. So enable polling mem and don't use doorbell for SDMA3. Signed-off-by: Pixel Ding <Pixel.Ding@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: update one PDE at a time v2Christian König
Horrible inefficient, but avoids problems when the root PD size becomes to big. v2: remove incr as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <davdi1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: stop joining PDEsChristian König
That doesn't hit any more most of the time anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: add amdgpu_evict_vram debugfs fileChristian König
Torture test for MM and VM support, can be used to evict all VRAM while the system is under load. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-12drm/amdgpu: cleanup debugfs handling a bitChristian König
Remove the superflous .debugfs_init callback and register all files in amdgpu_device.c in just one function. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-08drm/amdgpu: Add support for reporting VRAM usageKent Russell
Add functions to report the vram_usage from the amdgpu_device Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Ignore ACPI CRAT for non-APU systemsHarish Kasiviswanathan
Some AMD motherboards without an APU have a broken CRAT table which causes KFD initialization failures or incorrect information about NUMA nodes, CPU cores or system memory. Ignore CRAT tables without GPUs and rely on KFD's code to create a CRAT table for the CPU. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Module option to disable CRAT tableFelix Kuehling
Some systems have broken CRAT tables. Add a module option to ignore a CRAT table. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Add AQL Queue Memory flag on topologyBen Goz
This is needed for enabling a user-mode workaround for an AQL queue wrapping HW bug on Tonga. Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Fixup incorrect info in the CZ CRAT tablePhilip Cox
* Wrong value for max_waves_per_simd * Missing ATC capability bit Signed-off-by: Philip Cox <Philip.Cox@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Add perf counters to topologyAmber Lin
For hardware blocks whose performance counters are accessed via MMIO registers, KFD provides the support for those privileged blocks. IOMMU is one of those privileged blocks. Most performance counter properties required by Thunk are available at /sys/bus/event_source/devices/amd_iommu. This patch adds properties to topology in KFD sysfs for information not available in /sys/bus/event_source/devices/amd_iommu. They are shown at /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e. /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent. For dGPUs, who don't have IOMMU, nothing appears under /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Add topology support for dGPUsHarish Kasiviswanathan
Generate and parse VCRAT tables for dGPUs in kfd_topology_add_device. Some information that isn't available in the CRAT table is patched into the topology after parsing. HSA_CAP_DOORBELL_TYPE_1_0 is dependent on the ASIC feature CP_HQD_PQ_CONTROL.SLOT_BASED_WPTR, which was not introduced in VI until Carrizo. Report HSA_CAP_DOORBELL_TYPE_PRE_1_0 on Tonga ASICs. v2: Added #include <linux/pci.h> to kfd_crat.c to make it compile Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Ben Goz <ben.goz@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Add topology support for CPUsFelix Kuehling
Currently, the KFD topology information is generated by parsing the CRAT (ACPI) table. However, at present CRAT table is available only for AMD APUs. To support CPUs on systems without a CRAT table, the KFD driver will create a Virtual CRAT (VCRAT) table and then the existing code will parse that table to generate topology. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2017-12-08drm/amdkfd: Fix sibling_map[] sizeHarish Kasiviswanathan
Change kfd_cache_properties.sibling_map[256] to kfd_cache_properties.sibling_map[32]. Since, CRAT uses bitmap for sibling_map, it is more efficient to use bitmap in the kfd structure also. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 04:14:45 +0000