summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2020-11-24drm/amd/amdgpu: skip unload message in resetKenneth Feng
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset. Otherwise it will cause the fw wrong state after reset and no response for any messages. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/amdgpu: fix null pointer in runtime pmKenneth Feng
fix the null pointer issue when runtime pm is triggered. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: Add DPCS regs for dcn302 link encoderBhawanpreet Lakha
dpcs reg are missing for dcn302 link encoder regs list, so add them. Just like dcn3 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amdgpu: fix SI UVD firmware validate resume failSonny Jiang
The SI UVD firmware validate key is stored at the end of firmware, which is changed during resume while playing video. So get the key at sw_init and store it for fw validate using. Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amdgpu: add DID for dimgrey_cavefishTao Zhou
Add device id for dimgrey_cavefish. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amdgpu: add device ID for navy_flounder (v2)Tao Zhou
add device ID for navy_flounder v2: squash in updates Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amd/display: Add comments to hdcp property change codeBhawanpreet Lakha
[Why] These comments are helpful in understanding which case each if statement handles. [How] Add comments for state transitions (9 possible cases) Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amd/display: Add display only once.Bhawanpreet Lakha
[Why] We call add display multiple times because DESIRED->ENABLED cannot happen instantaneously. We can't compare the new_state/old_state to avoid this because on unplug we set the state to DESIRED and on hotplug the state will still be DESIRED. [How] Add a flag to dm_connector_state to keep track of when to enable or disable HDCP Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amd/pm: support runtime PPTable update for dimgrey_cavefishTao Zhou
There is no need to reset DPM for PPTable uploading on dimgrey_cavefish and PMFW can handle it, same as navy_flounder. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amd/pm: fix smu_v11_0_init_power power_context allocationRyan Taylor
Allocate smu_power->power_context to size of smu_11_0_power_context instead of smu_11_0_dpm_context. Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-18drm/amd/display: Always get CRTC updated constant values inside commit tailRodrigo Siqueira
We recently improved our display atomic commit and tail sequence to avoid some issues related to concurrency. One of the major changes consisted of moving the interrupt disable and the stream release from our atomic commit to our atomic tail (commit 6d90a208cfff ("drm/amd/display: Move disable interrupt into commit tail")) . However, the new code introduced inside our commit tail function was inserted right after the function drm_atomic_helper_update_legacy_modeset_state(), which has routines for updating internal data structs related to timestamps. As a result, in certain conditions, the display module can reach a situation where we update our constants and, after that, clean it. This situation generates the following warning: amdgpu 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) WARNING: CPU: 6 PID: 1269 at drivers/gpu/drm/drm_vblank.c:722 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... RIP: 0010:drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x32b/0x340 [drm] ... Call Trace: ? dc_stream_get_vblank_counter+0x57/0x60 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x20 [drm] drm_get_last_vbltimestamp+0xad/0xc0 [drm] drm_reset_vblank_timestamp+0x63/0xd0 [drm] drm_crtc_vblank_on+0x85/0x150 [drm] amdgpu_dm_atomic_commit_tail+0xaf1/0x2330 [amdgpu] commit_tail+0x99/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x123/0x150 [drm_kms_helper] amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] drm_atomic_helper_set_config+0x7c/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x20b/0x7e0 [drm] ? tomoyo_path_number_perm+0x6f/0x200 ? drm_mode_getcrtc+0x190/0x190 [drm] drm_ioctl_kernel+0xae/0xf0 [drm] drm_ioctl+0x245/0x400 [drm] ? drm_mode_getcrtc+0x190/0x190 [drm] amdgpu_drm_ioctl+0x4e/0x80 [amdgpu] __x64_sys_ioctl+0x91/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... For fixing this issue we rely upon a refactor introduced on drm_atomic_helper_update_legacy_modeset_state ("Remove the timestamping constant update from drm_atomic_helper_update_legacy_modeset_state()") which decouples constant values update from drm_atomic_helper_update_legacy_modeset_state to a new helper. Basically, this commit uses this new helper and place it right after our release module to avoid a situation where our CRTC struct gets wrong values. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1373 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-17drm/amd/pm: fix spelling mistakes in dev_warn messagesColin Ian King
There are two spelling mistakes in dev_warn messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-17drm/amdgpu: make gfxhub_v1_0 callback functions to be staticHawking Zhang
Those functions should be invoked through gfxhub.funcs pointer. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-17drm/amd/pm: retire dimgrey_cavefish hardcode for the use of soft PPTableTao Zhou
The PPTable provided by VBIOS can be used. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/amdgpu/atombios_encoders: Remove set but unused variable ↵Lee Jones
'backlight_level' Also removing the call to amdgpu_atombios_encoder_get_backlight_level_from_reg() since, according to Alex Deucher, "We call it again below indirectly". Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/atombios_encoders.c: In function ‘amdgpu_atombios_encoder_init_backlight’: drivers/gpu/drm/amd/amdgpu/atombios_encoders.c:174:5: warning: variable ‘backlight_level’ set but not used [-Wunused-but-set-variable] Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amdgpu: remove experimental flag from arcturusAlex Deucher
This has been stable for a while. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: update vgh bounding boxYongqiang Sun
[Why & How] Update bounding box as per spread sheet. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Increase sr enter/exit in rn ddr4 watermark tableWyatt Wood
[Why] After removing added latency for HostVM by default, DDR4 sr exit latencies were no longer large enough for some panels and caused underflow. [How] Add 1us to sr enter/exit watermark. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: 3.2.112Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: correct data typeRaymond Yang
[Why] We should use int for counting variable [How] Change type from bool to uint32_t Signed-off-by: Raymond Yang <rayyang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Expose new CRC window propertyWayne Lin
[Why] Instead of calculating CRC on whole frame, add flexibility to calculate CRC on specific frame region. [How] Add few crc window coordinate properties. By default, CRC is calculated on whole frame unless user space specifies the CRC calculation window. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: [FW Promotion] Release 0.0.42Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Add dual edp optimization flag.Yongqiang Sun
[Why & How] Add a dual edp power optimization flag, so driver will notify this flag to dmub FW to determine if apply the power optimization. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: set dpp dto as per requested clk for lower case.Yongqiang Sun
[Why] Blue screen when PNP with multiple monitor or hotplug external monitor when playing video due to dpp dto isn't programmed properly. If lower dpp clock, dpp dto need to be programmed first, and actual dpp clk not avalable yet. [How] set dpp dto as per request clk for lower case before dpp clk update, and after dpp clk updated set dpp dto again with actual dpp clk. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Add I2C memory low power supportJacky Liao
[Why] The I2C memory blocks should be powered down when they are not in use. This will reduce power consumption. [How] 1. Write to I2C_LIGHT_SLEEP_FORCE to put memory in light sleep when released 2. Added a debug option to allow this behaviour to be turned off Signed-off-by: Jacky Liao <ziyu.liao@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Detect dynamic backlight support in eDP sinkRoy Chan
[Why] Check if the eDP sink supports the dynamic backlight control [How] Query the dynamic backlight capability in DPCD (eDP case only) Signed-off-by: Roy Chan <roy.chan@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: minor restructuring of pbn calculation functionsWenjing Liu
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: fix cursor calculation for 1xnY rotated display groupsSamson Tam
[Why] Cursor is missing on displays 2 and up when doing rotated display groups in 1xnY setup. Calculation puts cursor out of bounds so it is not enabled. [How] In dcn10_set_cursor_position(), add in viewport.y into cursor calculations for 1xnY rotated display groups. For pipe split, check viewport.y for both pipes and use lower one to normalize cursor position before calculations. Add odm 2:1 support ( using same calculations as pipe split ). Signed-off-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: remove unused dml variablesDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Handle Unknown Result for SMU Periodic Retraining on DCN2.1Sung Lee
[WHY & HOW] Currently if VBIOSSMC_Result_UnknownCmd is returned as result of smu msg there is no way to know. Put 1 in param so if 1 is returned, this unknown case is handled. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Populate hostvm parameter before DML calculationSung Lee
[Why] If the system does not have hostvm enabled, disabling it for DML validation will allow more modes to pass at lower voltage levels. [How] When initializing HostVM save state to hubbub and read back when populating DML pipes from context. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Hook up PSR residency command to DSATWyatt Wood
[Why] Use GPINT command to get PSR residency from FW. [How] Hook up PSR residency command to DSAT. Since PSR Count Request is deprecated, we will use this. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Program dpp dto based on actual dpp clkYongqiang Sun
[Why] dpp dto phase and modulo are programmed with actual dpp global clk and pipe clk. Need to use actual dpp clk to prgoram dpp dto modulo to get more accuracy ratio. [How] assign actual dpp clk to dccg for dpp modulo programming. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amdgpu/sriov: reopen sienna_child smu ip block under sriovJane Jian
open smu ip block meets with one-vf mode need Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amdgpu: update golden setting for sienna_cichlidLikun Gao
Update golden setting for sienna_cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/pm: update driver if file for sienna cichlidLikun Gao
Update driver if file for sienna cichlid. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/pm: enable the fine grain tuning function for vangoghXiaojian Du
This patch is to enale the fine grain tuning function for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/pm: add the fine grain tuning function for vangoghXiaojian Du
This patch is to add the fine grain tuning function for vangogh. This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the setting target values by "s" command will take effect. Example: 1)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 2)use "s" -- set command to configure the min or max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "r" -- reset command to restore the min and max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Update dmub codeBhawanpreet Lakha
There is a delta in the dmub code - add boot options - add boot status - remove unused auto_load_is_done func pointer Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amdgpu: fix usable gart size calculationNirmoy Das
amdgpu_do_test_moves() is failing because of wrong usable gart size calculation and throwing: [drm:amdgpu_do_test_moves [amdgpu]] *ERROR* 0000000020bdc9f3 bind failed Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/display: Extract 3rd plane from metadataBas Nieuwenhuizen
Now that we actually expose the right number of planes we get problems with modifier aware libva if we use an unsupported modifier. So this ensures that we as much as possible use a modifier that radeonsi can actually render to without going to extreme difficulty to synchronize an extra DCC metadata plane with implicit sync. Looking into the opaque metadata isn't ideal but this converts to something mainly for the purpose of the userspace driver and falls back properly if it isn't what we expect. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/display: Set new format info for converted metadata.Bas Nieuwenhuizen
If we use DCC modifiers this can increase the number of planes from the initial 1 plane with metadata, so that we get a valid modifier from getfb2. Since the code didn't update the format_info getfb2 would only ever return 1 plane with a modifier for which userspace expects > 1. This moves the format lookup to amdgpu_display.c so we do not have issues when DC is not compiled. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/display: Store gem objects for planes 1-3Bas Nieuwenhuizen
Also do the proper validation which was missed. Besides the missing validation, not storing the objects in the framebuffer led to wrong results in the getfb2 ioctl. Note that this should really have been done for multi-plane formats like NV12 already before modifiers landed. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/display: Add missing pflip irq for dcn2.0Alex Deucher
If we have more than 4 displays we will run into dummy irq calls or flip timout issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/gfx_v7_0: Remove unused struct definitionLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:5211:45: warning: ‘gfx_v7_0_ip_block’ defined but not used [-Wunused-const-variable=] Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/smu_v11_0_i2c: Provide descriptions for 'control' and 'data' ↵Lee Jones
params Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:225: warning: Function parameter or member 'control' not described in 'smu_v11_0_i2c_transmit' drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:325: warning: Function parameter or member 'control' not described in 'smu_v11_0_i2c_receive' drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c:325: warning: Function parameter or member 'data' not described in 'smu_v11_0_i2c_receive' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_fw_attestation: Consume our own header containing ↵Lee Jones
prototypes Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c:130:6: warning: no previous prototype for ‘amdgpu_fw_attestation_debugfs_init’ [-Wmissing-prototypes] Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: John Clements <john.clements@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_vm_sdma: Fix 'amdgpu_vm_sdma_prepare()'s doc-rotLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Function parameter or member 'resv' not described in 'amdgpu_vm_sdma_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Function parameter or member 'sync_mode' not described in 'amdgpu_vm_sdma_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Excess function parameter 'owner' description in 'amdgpu_vm_sdma_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_sdma.c:63: warning: Excess function parameter 'exclusive' description in 'amdgpu_vm_sdma_prepare' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_vm_cpu: Fix 'amdgpu_vm_cpu_prepare()'s doc-rotLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or member 'resv' not described in 'amdgpu_vm_cpu_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Function parameter or member 'sync_mode' not described in 'amdgpu_vm_cpu_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'owner' description in 'amdgpu_vm_cpu_prepare' drivers/gpu/drm/amd/amdgpu/amdgpu_vm_cpu.c:50: warning: Excess function parameter 'exclusive' description in 'amdgpu_vm_cpu_prepare' Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amd/amdgpu/amdgpu_ras: Make local function ↵Lee Jones
'amdgpu_ras_error_status_query' static Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1482:6: warning: no previous prototype for ‘amdgpu_ras_error_status_query’ [-Wmissing-prototypes] Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 05:43:20 +0000