summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2022-01-14drm/amdgpu: invert the logic in amdgpu_device_should_recover_gpu()Alex Deucher
Rather than opting into GPU recovery support, default to on, and opt out if it's not working on a particular GPU. This avoids the need to add new asics to this list since this is a core feature. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-14drm/amdgpu: Enable recovery on yellow carpCHANDAN VURDIGERE NATARAJ
Add yellow carp to devices which support recovery Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-14Merge tag 'amd-drm-next-5.17-2022-01-12' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.17-2022-01-12: amdgpu: - SR-IOV fixes - Suspend/resume fixes - Display fixes - DMCUB fixes - DP alt mode fixes - RAS fixes - UBSAN fix - Navy Flounder VCN fix - ttm resource manager cleanup - default_groups change for kobj_type - vkms fix - Aldebaran fixes amdkfd: - SDMA ECC interrupt fix - License clarification - Pointer check fix - DQM fixes for hawaii - default_groups change for kobj_type - Typo fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220113030537.5758-1-alexander.deucher@amd.com
2022-01-14Merge tag 'drm-misc-fixes-2022-01-14' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next Two DT bindings fixes for meson, a device refcounting fix for sun4i, a probe fix for vga16fb, a locking fix for the CMA dma-buf heap and a compilation fix for ttm. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: I made sure I have exactly the same conflict resolution as Linus in 8d0749b4f83b ("Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm") to avoid further conflict fun. From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220114125454.zs46ny52lrxk3ljz@houat
2022-01-11drm/amdkfd: Fix ASIC name typosKent Russell
Three misspelled ASICs in comments here, so fix the spelling Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: Fix DQM asserts on HawaiiFelix Kuehling
start_nocpsch would never set dqm->sched_running on Hawaii due to an early return statement. This would trigger asserts in other functions and end up in inconsistent states. Bug: https://github.com/RadeonOpenCompute/ROCm/issues/1624 Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: Use correct VIEWPORT_DIMENSION for DCN2Harry Wentland
For some reason this file isn't using the appropriate register headers for DCN headers, which means that on DCN2 we're getting the VIEWPORT_DIMENSION offset wrong. This means that we're not correctly carving out the framebuffer memory correctly for a framebuffer allocated by EFI and therefore see corruption when loading amdgpu before the display driver takes over control of the framebuffer scanout. Fix this by checking the DCE_HWIP and picking the correct offset accordingly. Long-term we should expose this info from DC as GMC shouldn't need to know about DCN registers. Cc: stable@vger.kernel.org Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amd/pm: only send GmiPwrDnControl msg on master die (v3)Tao Zhou
PMFW only returns 0 on master die and sends NACK back on other dies for the message. v2: only send GmiPwrDnControl msg on master die instead of all dies. v3: remove the pointer check for get_socket_id and get_die_id as they should be present on Aldebaran. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: use spin_lock_irqsave to avoid deadlock by local interruptGuchun Chen
This is observed in SRIOV case with virtual KMS as display. _raw_spin_lock_irqsave+0x37/0x40 drm_handle_vblank+0x69/0x350 [drm] ? try_to_wake_up+0x432/0x5c0 ? amdgpu_vkms_prepare_fb+0x1c0/0x1c0 [amdgpu] drm_crtc_handle_vblank+0x17/0x20 [drm] amdgpu_vkms_vblank_simulate+0x4d/0x80 [amdgpu] __hrtimer_run_queues+0xfb/0x230 hrtimer_interrupt+0x109/0x220 __sysvec_apic_timer_interrupt+0x64/0xe0 asm_call_irq_on_stack+0x12/0x20 Fixes: 84ec374bd580 ("drm/amdgpu: create amdgpu_vkms (v4)") Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Kelly Zytaruk <kelly.zytaruk@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: not return error on the init_apu_flagsPrike Liang
In some APU project we needn't always assign flags to identify each other, so we may not need return an error. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: Use prange->update_list head for remove_listFelix Kuehling
The remove_list head was only used for keeping track of existing ranges that are to be removed from the svms->list. The update_list was used for new or existing ranges that need updated attributes. These two cases are mutually exclusive (i.e. the same range will never be on both lists). Therefore we can use the update_list head to track the remove_list and save another 16 bytes in the svm_range struct. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: Use prange->list head for insert_listFelix Kuehling
There are seven list_heads in struct svm_range: list, update_list, remove_list, insert_list, svm_bo_list, deferred_list, child_list. This patch and the next one remove two of them that are redundant. The insert_list head was only used for new ranges that are not on the svms->list yet. So we can use that list head for keeping track of new ranges before they get added, and use list_move_tail to move them to the svms->list when ready. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: Check for null pointer after calling kmemdupJiasheng Jiang
As the possible failure of the allocation, kmemdup() may return NULL pointer. Therefore, it should be better to check the 'props2' in order to prevent the dereference of NULL pointer. Fixes: 3a87177eb141 ("drm/amdkfd: Add topology support for dGPUs") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amd/display: invalid parameter check in dmub_hpd_callbackJosé Expósito
The function performs a check on the "adev" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: e27c41d5b0681 ("drm/amd/display: Support for DMUB HPD interrupt handling") Addresses-Coverity-ID: 1493909 ("Null pointer dereference") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11Revert "drm/amdgpu: Don't inherit GEM object VMAs in child process"Rajneesh Bhardwaj
This reverts commit fbcdbfde87509d523132b59f661a355c731139d0. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amd/display: reset dcn31 SMU mailbox on failuresMario Limonciello
Otherwise future commands may fail as well leading to downstream problems that look like they stemmed from a timeout the first time but really didn't. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the amdkfd sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: use default_groups in kobj_typeGreg Kroah-Hartman
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the amdgpu sysfs code to use default_groups field which has been the preferred way since aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Jonathan Kim <jonathan.kim@amd.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: shaoyunl <shaoyun.liu@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amd/amdgpu: Add pcie indirect support to amdgpu_mm_wreg_mmio_rlc()Tom St Denis
The function amdgpu_mm_wreg_mmio_rlc() is used by debugfs to write to MMIO registers. It didn't support registers beyond the BAR mapped MMIO space. This adds pcie indirect write support. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: recover gart table at resumeNirmoy Das
Get rid off pin/unpin of gart BO at resume/suspend and instead pin only once and try to recover gart content at resume time. This is much more stable in case there is OOM situation at 2nd call to amdgpu_device_evict_resources() while evicting GART table. v3: remove gart recovery from other places v2: pin gart at amdgpu_gart_table_vram_alloc() Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: do not pass ttm_resource_manager to vram_mgrNirmoy Das
Do not allow exported amdgpu_vram_mgr_*() to accept any ttm_resource_manager pointer. Also there is no need to force other module to call a ttm function just to eventually call vram_mgr functions. v2: pass adev's vram_mgr instead of adev Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdkfd: remove unused functionNirmoy Das
Remove unused amdgpu_amdkfd_get_vram_usage() CC: Felix.Kuehling@amd.com Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Fixes: dfcbe6d5f4a340 ("drm/amdgpu: Remove unused function pointers")
2022-01-11drm/amdgpu: do not pass ttm_resource_manager to gtt_mgrNirmoy Das
Do not allow exported amdgpu_gtt_mgr_*() to accept any ttm_resource_manager pointer. Also there is no need to force other module to call a ttm function just to eventually call gtt_mgr functions. v4: remove unused adev. v3: upcast mgr from ttm resopurce manager instead of getting it from adev. v2: pass adev's gtt_mgr instead of adev. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: Unmap MMIO mappings when device is not unpluggedLeslie Shi
Patch: 3efb17ae7e92 ("drm/amdgpu: Call amdgpu_device_unmap_mmio() if device is unplugged to prevent crash in GPU initialization failure") makes call to amdgpu_device_unmap_mmio() conditioned on device unplugged. This patch unmaps MMIO mappings even when device is not unplugged. v2: Add condition of drm_dev_enter() to deleted unmaps in patch "drm/amdgpu: Unmap all MMIO mappings" Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: Enable second VCN for certain Navy Flounder.Peng Ju Zhou
Certain Navy Flounder cards have 2 VCNs, enable it. Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amd/display: explicitly set is_dsc_supported to false before useMario Limonciello
When UBSAN is enabled a case is shown on unplugging the display that this variable hasn't been initialized by `update_dsc_caps`, presumably when the display was unplugged it wasn't copied from the DPCD. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1956497 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-11drm/amdgpu: Clear garbage data in err_data before usageJiawei Gu
Memory of err_data should be cleaned before usage when there're multiple entry in ras ih. Otherwise garbage data from last loop will be used. Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-10Revert "drm/amd/display: Fix for otg synchronization logic"Linus Torvalds
This reverts commit a896f870f8a5f23ec961d16baffd3fda1f8be57c. It causes odd flickering on my Radeon RX580 (PCI ID 1002:67df rev e7, subsystem ID 1da2:e353). Bisected right to this commit, and reverting it fixes things. Link: https://lore.kernel.org/all/CAHk-=wg9hDde_L3bK9tAfdJ4N=TJJ+SjO3ZDONqH5=bVoy_Mzg@mail.gmail.com/ Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-10Merge tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights are support for privacy screens found in new laptops, a bunch of nomodeset refactoring, and i915 enables ADL-P systems by default, while starting to add RPL-S support. vmwgfx adds GEM and support for OpenGL 4.3 features in userspace. Lots of internal refactorings around dma reservations, and lots of driver refactoring as well. Summary: core: - add privacy screen support - move nomodeset option into drm subsystem - clean up nomodeset handling in drivers - make drm_irq.c legacy - fix stack_depot name conflicts - remove DMA_BUF_SET_NAME ioctl restrictions - sysfs: send hotplug event - replace several DRM_* logging macros with drm_* - move hashtable to legacy code - add error return from gem_create_object - cma-helper: improve interfaces, drop CONFIG_DRM_KMS_CMA_HELPER - kernel.h related include cleanups - support XRGB2101010 source buffers ttm: - don't include drm hashtable - stop pruning fences after wait - documentation updates dma-buf: - add dma_resv selftest - add debugfs helpers - remove dma_resv_get_excl_unlocked - documentation - make fences mandatory in dma_resv_add_excl_fence dp: - add link training delay helpers gem: - link shmem/cma helpers into separate modules - use dma_resv iteratior - import dma-buf namespace into gem helper modules scheduler: - fence grab fix - lockdep fixes bridge: - switch to managed MIPI DSI helpers - register and attach during probe fixes - convert to YAML in several places. panel: - add bunch of new panesl simpledrm: - support FB_DAMAGE_CLIPS - support virtual screen sizes - add Apple M1 support amdgpu: - enable seamless boot for DCN 3.01 - runtime PM fixes - use drm_kms_helper_connector_hotplug_event - get all fences at once - use generic drm fb helpers - PSR/DPCD/LTTPR/DSC/PM/RAS/OLED/SRIOV fixes - add smart trace buffer (STB) for supported GPUs - display debugfs entries - new SMU debug option - Documentation update amdkfd: - IP discovery enumeration refactor - interface between driver fixes - SVM fixes - kfd uapi header to define some sysfs bitfields. i915: - support VESA panel backlights - enable ADL-P by default - add eDP privacy screen support - add Raptor Lake S (RPL-S) support - DG2 page table support - lots of GuC/HuC fw refactoring - refactored i915->gt interfaces - CD clock squashing support - enable 10-bit gamma support - update ADL-P DMC fw to v2.14 - enable runtime PM autosuspend by default - ADL-P DSI support - per-lane DP drive settings for ICL+ - add support for pipe C/D DMC firmware - Atomic gamma LUT updates - remove CCS FB stride restrictions on ADL-P - VRR platform support for display 11 - add support for display audio codec keepalive - lots of display refactoring - fix runtime PM handling during PXP suspend - improved eviction performance with async TTM moves - async VMA unbinding improvements - VMA locking refactoring - improved error capture robustness - use per device iommu checks - drop bits stealing from i915_sw_fence function ptr - remove dma_resv_prune - add IC cache invalidation on DG2 nouveau: - crc fixes - validate LUTs in atomic check - set HDMI AVI RGB quant to full tegra: - buffer objects reworks for dma-buf compat - NVDEC driver uAPI support - power management improvements etnaviv: - IOMMU enabled system support - fix > 4GB command buffer mapping - close a DoS vector - fix spurious GPU resets ast: - fix i2c initialization rcar-du: - DSI output support exynos: - replace legacy gpio interface - implement generic GEM object mmap msm: - dpu plane state cleanup in prep for multirect - dpu debugfs cleanups - dp support for sc7280 - a506 support - removal of struct_mutex - remove old eDP sub-driver anx7625: - support MIPI DSI input - support HDMI audio - fix reading EDID lvds: - fix bridge DT bindings megachips: - probe both bridges before registering dw-hdmi: - allow interlace on bridge ps8640: - enable runtime PM - support aux-bus tx358768: - enable reference clock - add pulse mode support ti-sn65dsi86: - use regmap bulk write - add PWM support etnaviv: - get all fences at once gma500: - gem object cleanups kmb: - enable fb console radeon: - use dma_resv_wait_timeout rockchip: - add DSP hold timeout - suspend/resume fixes - PLL clock fixes - implement mmap in GEM object functions - use generic fbdev emulation sun4i: - use CMA helpers without vmap support vc4: - fix HDMI-CEC hang with display is off - power on HDMI controller while disabling - support 4K@60Hz modes - support 10-bit YUV 4:2:0 output vmwgfx: - fix leak on probe errors - fail probing on broken hosts - new placement for MOB page tables - hide internal BOs from userspace - implement GEM support - implement GL 4.3 support virtio: - overflow fixes xen: - implement mmap as GEM object function omapdrm: - fix scatterlist export - support virtual planes mediatek: - MT8192 support - CMDQ refinement" * tag 'drm-next-2022-01-07' of git://anongit.freedesktop.org/drm/drm: (1241 commits) drm/amdgpu: no DC support for headless chips drm/amd/display: fix dereference before NULL check drm/amdgpu: always reset the asic in suspend (v2) drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amd/display: Fix the uninitialized variable in enable_stream_features() drm/amdgpu: fix runpm documentation amdgpu/pm: Make sysfs pm attributes as read-only for VFs drm/amdgpu: save error count in RAS poison handler drm/amdgpu: drop redundant semicolon drm/amd/display: get and restore link res map drm/amd/display: support dynamic HPO DP link encoder allocation drm/amd/display: access hpo dp link encoder only through link resource drm/amd/display: populate link res in both detection and validation drm/amd/display: define link res and make it accessible to all link interfaces drm/amd/display: 3.2.167 drm/amd/display: [FW Promotion] Release 0.0.98 drm/amd/display: Undo ODM combine drm/amd/display: Add reg defs for DCN303 drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Set optimize_pwr_state for DCN31 ...
2022-01-10Merge tag 'ras_core_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: "A relatively big amount of movements in RAS-land this time around: - First part of a series to move the AMD address translation code from arch/x86/ to amd64_edac as that is its only user anyway - Some MCE error injection improvements to the AMD side - Reorganization of the #MC handler code and the facilities it calls to make it noinstr-safe - Add support for new AMD MCA bank types and non-uniform banks layout - The usual set of cleanups and fixes" * tag 'ras_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/mce: Reduce number of machine checks taken during recovery x86/mce/inject: Avoid out-of-bounds write when setting flags x86/MCE/AMD, EDAC/mce_amd: Support non-uniform MCA bank type enumeration x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank types x86/mce: Check regs before accessing it x86/mce: Mark mce_start() noinstr x86/mce: Mark mce_timed_out() noinstr x86/mce: Move the tainting outside of the noinstr region x86/mce: Mark mce_read_aux() noinstr x86/mce: Mark mce_end() noinstr x86/mce: Mark mce_panic() noinstr x86/mce: Prevent severity computation from being instrumented x86/mce: Allow instrumentation during task work queueing x86/mce: Remove noinstr annotation from mce_setup() x86/mce: Use mce_rdmsrl() in severity checking code x86/mce: Remove function-local cpus variables x86/mce: Do not use memset to clear the banks bitmaps x86/mce/inject: Set the valid bit in MCA_STATUS before error injection x86/mce/inject: Check if a bank is populated before injecting x86/mce: Get rid of cpu_missing ...
2022-01-09Revert "drm/amdgpu: stop scheduler when calling hw_fini (v2)"Len Brown
This reverts commit f7d6779df642720e22bffd449e683bb8690bd3bf. This bisected regression has impacted suspend-resume stability since 5.15-rc1. It regressed -stable via 5.14.10. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215315 Fixes: f7d6779df64 ("drm/amdgpu: stop scheduler when calling hw_fini (v2)") Cc: Guchun Chen <guchun.chen@amd.com> Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-07drm/amd/display: Add version check before using DP alt query interfaceNicholas Kazlauskas
[Why] To maintain compatibility with firmware older than 4.0.11. Those firmware may have interrmittent hangs with RDCSPIPE or the PHY, but we shouldn't regress their previous behavior. [How] Use the new path if firmware is development or 4.0.11 or newer. Use the legacy path otherwise. Fixes: 41f91315b5be5a ("drm/amd/display: Query DMCUB for dp alt status") Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: introduce mpo detection flagsMikita Lipski
[why] We want to know if new crtc state is enabling MPO configuration before enabling it. [how] Detect if both primary and overlay planes are enabled on the same CRTC. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: Add check for forced_clocks debug optionCharlene Liu
[why] driver missed the check. [how] add the check. add min display clock = 100mhz check based on dccg doc. [note] add SetPhyclkVoltageByFreq as confirmed with smu, but not enabled in this change. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: Don't reinitialize DMCUB on s0ix resumeNicholas Kazlauskas
[Why] PSP will suspend and resume DMCUB. Driver should just wait for DMCUB to finish the auto load before continuining instead of placing it into reset, wiping its firmware state and reinitializing. If we don't let DMCUB fully finish initializing for S0ix then some state will be lost and screen corruption can occur due to incorrect address translation. [How] Use dmub_srv callbacks to determine in DMCUB is running and wait for auto-load to complete before continuining. In S0ix DMCUB will be running and DAL fw so initialize will skip. In S3 DMCUB will not be running and we will do a full hardware init. In S3 DMCUB will be running but will not be DAL fw so we will also do a full hardware init. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: unhard code link to phy idx mapping in dc link and clean upWenjing Liu
[why] 1. Current code hard codes link to PHY mapping in dc link level per asic per revision. This is not scalable. In long term the mapping will be obatined from DMUB and store in dc resource. 2. Depending on DCN revision and endpoint type, the definition of dio_output_idx dio_output_type and phy_idx are not consistent. We need to unify the meaning of these hardware indices across different system configuration. [how] 1. Temporarly move the hardcoded mapping to dc_resource level, which should have full awareness of asic specific configuration and add a TODO comment to move the mapping to DMUB. 2. populate dio_output_idx/phy_idx for all configuration, define usb4_enabled bit instead of dio_output_type as an external enum. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/display: Fix underflow for fused display pipes caseYi-Ling Chen
[Why] Depend on res_pool->res_cap->num_timing_generator to query timing gernerator information, it would case underflow at the fused display pipes case. Due to the res_pool->res_cap->num_timing_generator records default timing generator resource built in driver, not the current chip. [How] Some ASICs would be fused display pipes less than the default setting. In dcnxx_resource_construct function, driver would obatin real timing generator count and store it into res_pool->timing_generator_count. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amdgpu: don't set s3 and s0ix at the same timeMario Limonciello
This makes it clearer which codepaths are in use specifically in one state or the other. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amdgpu: explicitly check for s0ix when evicting resourcesMario Limonciello
This codepath should be running in both s0ix and s3, but only does currently because s3 and s0ix are both set in the s0ix case. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amd/pm: keep the BACO feature enabled for suspendEvan Quan
To pair with the workaround which always reset the ASIC in suspend. Otherwise, the reset which relies on BACO will fail. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amdgpu: add dummy event6 for vega10James Yao
[why] Malicious mailbox event1 fails driver loading on vega10. A dummy event6 prevent driver from taking response from malicious event1 as its own. [how] On vega10, send a mailbox event6 before sending event1. Signed-off-by: James Yao <yiqing.yao@amd.com> Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-07drm/amdkfd: enable sdma ecc interrupt event can be handled by ↵yipechai
event_interrupt_wq_v9 Enable sdma ecc interrupt event can be handled by event_interrupt_wq_v9. Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31drm/amdgpu: disable runpm if we are the primary adapterAlex Deucher
If we are the primary adapter (i.e., the one used by the firwmare framebuffer), disable runtime pm. This fixes a regression caused by commit 55285e21f045 which results in the displays waking up shortly after they go to sleep due to the device coming out of runtime suspend and sending a hotplug uevent. v2: squash in reworked fix from Evan Fixes: 55285e21f045 ("fbdev/efifb: Release PCI device's runtime PM ref during FB destroy") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31drm/amd/pm: keep the BACO feature enabled for suspendEvan Quan
To pair with the workaround which always reset the ASIC in suspend. Otherwise, the reset which relies on BACO will fail. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-31Merge branch 'drm-misc-fixes' of ssh://git.freedesktop.org/git/drm/drm-misc ↵Dave Airlie
into drm-fixes This merges two fixes that haven't been sent to me yet, but I wanted to get in. One amdgpu fix, but one nouveau regression fixer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-12-31Merge tag 'amd-drm-next-5.17-2021-12-30' of ↵Dave Airlie
ssh://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.17-2021-12-30: amdgpu: - Suspend/resume fixes - Fence fix - Misc code cleanups - IP discovery fixes - SRIOV fixes - RAS fixes - GMC 8 VRAM detection fix - FRU fixes for Aldebaran - Display fixes amdkfd: - SVM fixes - IP discovery fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211230141032.613596-1-alexander.deucher@amd.com
2021-12-30drm/amdgpu: no DC support for headless chipsAlex Deucher
Chips with no display hardware should return false for DC support. v2: drop Arcturus and Aldebaran Fixes: f7f12b25823c0d ("drm/amdgpu: default to true in amdgpu_device_asic_has_dc_support") Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reported-by: Tareque Md.Hanif <tarequemd.hanif@yahoo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: fix dereference before NULL checkJosé Expósito
The "plane_state" pointer was access before checking if it was NULL. Avoid a possible NULL pointer dereference by accessing the plane address after the check. Addresses-Coverity-ID: 1493892 ("Dereference before null check") Fixes: 3f68c01be9a22 ("drm/amd/display: add cyan_skillfish display support") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: always reset the asic in suspend (v2)Alex Deucher
If the platform suspend happens to fail and the power rail is not turned off, the GPU will be in an unknown state on resume, so reset the asic so that it will be in a known good state on resume even if the platform suspend failed. v2: handle s0ix Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable ↵Evan Quan
platform By setting mp1_state as PP_MP1_STATE_UNLOAD, MP1 will do some proper cleanups and put itself into a state ready for PNP. That can workaround some random resuming failure observed on BOCO capable platforms. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:00:32 +0000