summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/pm
AgeCommit message (Collapse)Author
2021-01-08drm/amd/pm: modify the fine grain tuning function for RenoirXiaojian Du
This patch is to improve the fine grain tuning function for Renoir. The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage to config gfxclk. Meanwhile, another sysfs node -- power_dpm_force_perfomance_level also affects the gfx clk. It will cause confusion when these two sysfs nodes works together. And the flag "od_enabled" is used to control the overdrive function for dGPU, like navi10, navi14 and navi21. APU like Renior or Vangogh uses this "od_enabled" to configure the frequency range of gfx clock, but the max value of frequency range will not be higher than the safe limit, it is not "overdrive". So this patch adds two new flags -- "fine_grain_enabled" and "fine_grain_started" to avoid this confusion, the flag will make these two sysfs nodes work separately. The flag "fine_grain_enabled" is set as "enabled" by default, so the fine grain tuning function will be enabled by default. But the flag "fine_grain_started" is set as "false" by default, so the fine grain function will not take effect until it is set as "true". Only when power_dpm_force_perfomance_level is changed to "manual" mode, the flag "fine_grain_started" will be set as "true", and the fine grain tuning function will be started. In other profile modes, including "auto", "high", "low", "profile_peak", "profile_standard", "profile_min_sclk", "profile_min_mclk", the flag "fine_grain_started" will be set as "false", and the od range of fine grain tuning function will be restored default value. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-08drm/amd/pm: add the parameters of power profiles for vangoghXiaojian Du
This pacth is to add the parameters of power profiles for vangogh, includeing "profile_peak", "profile_standard", "profile_min_sclk", "profile_min_mclk". Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-08drm/amdgpu: Correct the read sclk for navi10Emily.Deng
According to hw, after navi10,it runs in dfll mode, and should read sclk from AverageGfxclkFrequency. Signed-off-by: Emily.Deng <Emily.Deng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCOXiaojian Du
This patch is to improve the fine grain tuning function for RV/RV2/PCO. The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage to config gfxclk. Meanwhile, another sysfs node -- power_dpm_force_perfomance_level also affects the gfx clk. It will cause confusion when these two sysfs nodes works together. So this patch adds one flag to avoid this confusion, the flag will make these two sysfs nodes work separately. The flag is set as "disabled" by default, so the fine grain tuning function will be disabled by default. Only when power_dpm_force_perfomance_level is changed to "manual" mode, the flag will be set as "enabled", and the fine grain tuning function will be enabled. In other profile modes, including "auto", "high", "low", "profile_peak", "profile_standard", "profile_min_sclk", "profile_min_mclk", the flag will be set as "disabled", and the od range of fine grain tuning function will be restored default value. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: enable dclk/vclk dpm function in "auto" power profile for vangoghXiaojian Du
This patch is to enable dclk/vclk dpm function in "auto" power profile for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: fix the failure when change power profile for renoirXiaojian Du
This patch is to fix the failure when change power profile to "profile_peak" for renoir. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add support to umd P-state function for vangoghXiaojian Du
This patch is to add support to umd P-state function for vangogh. It enables the "set" function of 3 sysfs nodes: pp_dpm_mclk, pp_dpm_fclk, pp_dpm_socclk, the functions is used to set the DPM frequency level of memclk/fclk/socclk. Due to only after enabling the "power_dpm_force_performance_level" sysfs node, it is allowed to set these three nodes, so this patch also enables the "powe_dpm_force_performance_level" sysfs node, which is used to change power profile. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add some basic functions to support umd P-state function for ↵Xiaojian Du
vangogh. This patch is to add some basic functions to support umd P-state function for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add some basic functions to support umd P-state function for ↵Xiaojian Du
vangogh. This patch is to add some basic functions to support umd P-state function for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: enable the fine grain tuning function for renoirXiaojian Du
This patch is to enable the fine grain tuning function for renoir. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add the fine grain tuning function for renoirXiaojian Du
This patch is to add the fine grain tuning function for renoir. This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency manually or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the target values set by "s" command will take effect. Example: 1)change power profile from "auto" to "standard" $ cat power_dpm_force_performance_level auto $ echo "profile_standard" > power_dpm_force_performance_level $ cat power_dpm_force_performance_level profile_standard 2)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "s" -- set command to configure the min and max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 4)use "r" -- reset command to restore the min or max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: updated PM to I2C controller port on sienna cichlidJohn Clements
sienna cichlid interfaces with RAS eeprom on I2C controller port 1 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCOXiaojian Du
This patch is to improve the fine grain tuning function for RV/RV2/PCO. This patch adds two new commands: "restore" and "commit". This function uses the pp_od_clk_voltage sysfs file to configure the min and max value of gfx clock frequency manually or restore the default value. Command guide: echo "s level value" > pp_od_clk_voltage "s" - set the sclk frequency "level" - 0 or 1, "0" represents the min value, "1" represents the max value "value" - the target value of sclk frequency, it should be limited in the safe range echo "r" > pp_od_clk_voltage "r" - reset the sclk frequency, restore the default value instantly echo "c" > pp_od_clk_voltage "c" - commit the min and max value of sclk frequency to the system only after the commit command, the target values set by "s" command will take effect. Example: 1)change power profile from "auto" to "manual" $ cat power_dpm_force_performance_level auto $ echo "manual" > power_dpm_force_performance_level $ cat power_dpm_force_performance_level manual 2)check the default sclk frequency $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz 3)use "s" -- set command to configure the min and max sclk frequency $ echo "s 0 600" > pp_od_clk_voltage $ echo "s 1 1000" > pp_od_clk_voltage $ echo "c" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 600Mhz 1: 1000Mhz OD_RANGE: SCLK: 200MHz 1400MHz 4)use "r" -- reset command to restore the min or max sclk frequency $ echo "r" > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 200Mhz 1: 1400Mhz OD_RANGE: SCLK: 200MHz 1400MHz Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: enable the "fetch" function of pp_dpm_vclk/dclk for vangoghXiaojian Du
This patch is to enable the "fetch" function of pp_dpm_vclk and pp_dpm_dclk. It allows to fetch the current frequency of vcn and dcn and their DPM levels for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add two new sysfs nodes for vangoghXiaojian Du
This patch is to add two new sysfs nodes for vangogh: pp_dpm_dclk and pp_dpm_vclk. The two sysfs nodes are similar to pp_dpm_fclk/memclk/socclk. pp_dpm_dclk represents the DPM frequency of dcn unit. pp_dpm_vclk represents the DPM frequency of vcn unit. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add new feature map macros to resolve duplicate nameXiaojian Du
This patch is to add new feature map macros to resolve duplicate name. Vangogh uses one different format to name some feature bits of swSMU, it causes some duplicate name in the existing feature map list. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: add support to umd P-state "fetch" function for vangoghXiaojian Du
This patch is to add supoort to umd P-state function for vangogh. It enables the "fetch" function of 3 sysfs nodes: pp_dpm_mclk, pp_dpm_fclk, pp_dpm_socclk,the function is used to fetch the current frequency of memclk/fclk/socclk. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amd/pm: correct the sensor value of power for vangoghXiaojian Du
This patch is to correct the sensor value of power for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: support overdrive vddgfx offset setting(V2)Evan Quan
This is supported by Sienna Cichlid, Navy Flounder and Dimgrey Cavefish. For these ASICs, the target voltage calculation can be illustrated by "voltage = voltage calculated from v/f curve + overdrive vddgfx offset". V2: limit the smu_version check for Sienna Cichlid only Here are some sample usages about this new OD setting: 1. Check current vddgfx offset setting by cat /sys/class/drm/card0/device/pp_od_clk_voltage ... ... OD_VDDGFX_OFFSET: 0mV ... ... 2. Set new vddgfx offset by echo "vo 10" > /sys/class/drm/card0/device/pp_od_clk_voltage cat /sys/class/drm/card0/device/pp_od_clk_voltage ... ... OD_VDDGFX_OFFSET: 10mV ... ... 3. Commit the new setting by echo "c" > /sys/class/drm/card0/device/pp_od_clk_voltage Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: enable Sienna Cichlid overdrive supportEvan Quan
Enable Sienna Cichlid gfxclk/uclk overdrive support. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: populate Sienna Cichlid default overdrive table settingsEvan Quan
Populate the bootup overdrive table settings. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: Add interface for request WGPsJinzhou Su
When user specifies a reduced WGP(CU) config via disalbe_cu module parameter, this does not disable the clocks which uses additional power. This interface send active WGP number to SMU and SMU will cooperate with RLC to power off relative WGPs. v2: Add request active WGPs in Vangogh smu post init. Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: add pptable_funcs documentation (v3)Ryan Taylor
Documents the hooks in struct pptable_funcs. v2: Improved documentation accuracy. v3: Improved set_default_od_settings() definition. Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfwEvan Quan
This can suppress the annoying but unharmful prompts. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-17drm/amd/pm: check pmfw version before issuing RlcPowerNotify messageXiaomeng Hou
Only pmfw version behind v4.63.23.00 could support this message. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amdgpu: skip load smu and sdma microcode on sriov for SIENNA_CICHLIDStanley.Yang
skip load smu and sdma fw on sriov due to sos, ta and asd fw have been skipped for SIENNA_CICHLID. V2: move asic check into smu11 Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/pm: add deep sleep control for uclk and fclkEvan Quan
These are supported by Sienna Cichlid and should be taken into consideration during DS control. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/pm: update the data strucutre for SMU metrics exchangeEvan Quan
This is needed for Sienna Cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/pm: correct the data structure for activity monitor coeff exchangeEvan Quan
This is needed for Sienna Cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/pm: fulfill the sienna cichlid UMD PSTATE profiling clocksEvan Quan
Fulfill the UMD PSTATE profiling clocks of sienna cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: inform SMU RLC status thus enable/disable DPM feature for vangoghXiaomeng Hou
RLC is halted when system suspend/shutdown. However, due to DPM enabled, PMFW is unaware of RLC being halted and will continue sending messages, which would eventually cause an ACPI hang. Use the system_feature_control interface to notify SMU the status of RLC (Normal/OFF) thus enable/disable DPM feature. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Lazar Lijo <Lijo.Lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: update the smu v11.5 smc header for vangoghXiaomeng Hou
Add new PMFW message to notify RLC engine status. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Lazar Lijo <Lijo.Lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: typo fix (CUSTOM -> COMPUTE)Evan Quan
The "COMPUTE" was wrongly spelled as "CUSTOM". Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: fulfill sienna cichlid 2nd usb2.0 port workaroundEvan Quan
Fulfill the 2nd usb2.0 port workaround for sienna cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: new SMC message for 2nd usb2.0 port workaroundEvan Quan
The workaround is needed by sienna cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: expose the firmware_capability from firmware_info tableEvan Quan
That will help to determine whether 2ND_USB20_PORT workaround is needed for Sienna Cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: correct the gpo control for sienna cichlidEvan Quan
New SMC message was introduced for gpo control on sienna cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: correct power limit setting for SMU V11Evan Quan
Correct the power limit setting for SMU V11 asics. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-10drm/amd/pm: support power source switch on Sienna CichlidEvan Quan
Enable power source switch on Sienna Cichlid. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for ravenChangfeng
When using old WORKLOAD_PPLIB setting in smu10.h, there is problem that it can't be able to switch to mak gpu clk during compute workload. It needs to update WORKLOAD_PPLIB setting to fix this issue. Signed-off-by: Changfeng <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/pm: remove one unsupported smu function for vangoghXiaojian Du
This patch is to remove one unsupported smu function, this function will set the smu feature mask to disable all smu features in exception. Because vangogh doesn't support to set the smu feature mask by driver software, so this function is invalid for vangogh. Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/pm: update driver if version for dimgrey_cavefishTao Zhou
Per PMFW 59.16.0. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/pm: invalidate hdp before CPU access the memory written by GPUEvan Quan
To eliminate the possible influence by outdated HDP read cache. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-03drm/amdgpu/powerplay: parse fan table for CI asicsAlex Deucher
Set up all the parameters required for SMU fan control if supported. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201539 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/renoir: simplify sensor handling (v2)Alex Deucher
Just query the metrics table directly rather than going through an extra level of functions. v2: use proper enum Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/vangogh: use metrics table for voltages (v2)Alex Deucher
Fixes voltage reading for vddgfx and adds support for vddsoc. v2: use new voltage enum Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/vangogh: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu: add metrics enums for voltageAlex Deucher
To be used in subsequent patches. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/sienna_cichlid: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/swsmu/arcturus: simplify sensor handlingAlex Deucher
Just query the metrics table directly rather than going through an extra level of functions. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 00:25:35 +0000