summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/pm/swsmu/inc
AgeCommit message (Collapse)Author
2024-08-06drm/amd/pm: update powerplay structure on smu v14.0.2/3Kenneth Feng
update powerplay structure on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-10drm/amd/pm: Ignore initial value in smu response registerDanijel Slivka
Why: If the reg mmMP1_SMN_C2PMSG_90 is being written to during amdgpu driver load or driver unload, subsequent amdgpu driver load will fail at smu_hw_init. The default of mmMP1_SMN_C2PMSG_90 register at a clean environment is 0x1 and if value differs from expected, amdgpu driver load will fail. How to fix: Ignore the initial value in smu response register before the first smu message is sent,if smc in SMU_FW_INIT state, just proceed further to send the message. If register holds an unexpected value after smu message was sent set, smc_state to SMU_FW_HANG state and no further smu messages will be sent. v2: Set SMU_FW_INIT state at the start of smu hw_init/resume. Check smc_fw_state before sending smu message if in hang state skip sending message. Set SMU_FW_HANG only in case unexpected value is detected Signed-off-by: Danijel Slivka <danijel.slivka@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-25drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1Li Ma
[Why] SMU firmware has not supported MALL PG. [How] Disable MALL PG and make it always on until SMU firmware is ready. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1Li Ma
[Why] SMU firmware has not supported MALL PG. [How] Disable MALL PG and make it always on until SMU firmware is ready. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/pm: enable thermal alert on smu 14.0.2/3Kenneth Feng
enable thermal alert on smu 14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/pm: Remove unused interface to set plpdLijo Lazar
Remove unused callback to set PLPD policy and its implementation from arcturus, aldebaran and SMUv13.0.6 SOCs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/swsmu: update Dpmclocks_t for smu v14.0.1Li Ma
MinGfxClk in Dpmclocks_t is wrong. According to pmfw, dropping an uint8_t spare in Dpmclocks_t. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-20drm/amd/pm: update driver-if interfaceKenneth Feng
update driver-if interface for smu 14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amd/pm: Remove legacy interface for xgmi plpdLijo Lazar
Replace the legacy interface with amdgpu_dpm_set_pm_policy to set XGMI PLPD mode. Also, xgmi_plpd_policy sysfs node is not used by any client. Remove that as well. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amd/pm: Add xgmi plpd policy to pm_policyLijo Lazar
Add support to set XGMI PLPD policy levels through 'pm_policy/xgmi_plpd' sysfs node. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amd/pm: Update PMFW messages for SMUv13.0.6Lijo Lazar
Add PMF message to select a Pstate policy in SOCs with SMU v13.0.6. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amd/pm: Add support for DPM policiesLijo Lazar
Add support to set/get information about different DPM policies. The support is only available on SOCs which use swsmu architecture. A DPM policy type may be defined with different levels. For example, a policy may be defined to select Pstate preference and then later a pstate preference may be chosen. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-17drm/amd/pm: support pp_dpm_pcie on smu v14.0.2/3Kenneth Feng
support pp_dpm_pcie on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-02drm/amd/pm: add tool log support on smu v14.0.2/3Kenneth Feng
add tool log support on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/pm: fix uninitialized variable warning for smu_v13Tim Huang
Clear warning that using uninitialized variable when the dpm is not enabled and reuse the code for SMU13 to get the boot frequency. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/swsmu: add smu v14_0_2 supportLikun Gao
Add initial support for smu v14_0_2. v2: fix warnings (Alex) v3: squash in various fixes (Alex) v4: squash in various fixes (Alex) v5: remove hardcoded pptable id (Alex) v6: update fw version (Alex) v7: squash in more updates (Alex) v8: rebase, squash in pptable override updates, combo table updates, SW CTF support (Alex) Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/swsmu: add pptable header for smu v14_0_2Likun Gao
Add pptable header for smu v14_0_2. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/swsmu: add smu v14_0_2 ppsmc fileKenneth Feng
Add initial smu v14_0_2 ppsmc file v2: Squash in updates (Alex) v3: Squash in updates (Alex) Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/swsmu: add smu14 driver if fileKenneth Feng
Add initial smu14 driver if file v2: squash in updates (Alex) v3: squash in updates (Alex) v4: squash in updates (Alex) Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/swsmu: add smu14 ip supportKenneth Feng
Add initial swSMU support for smu 14 series ASIC. v2: rebase (Alex) Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/pm: Add PMFW message and capability flagsLijo Lazar
Add flags to categorize messages and PMFW capabilities. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu/pm: Add support for MACO flag checkingMa Jun
Add support for MACO flag checking. MACO mode only works if BACO is supported. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu/pm: Change the member function name in pp_hwmgr_func and ↵Ma Jun
pptable_funcs Use a unified and more explicit name get_bamaco_support to replace is_baco_support and get_asic_baco_capability Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/pm: fix the high voltage issue after unloadKenneth Feng
fix the high voltage issue after unload on smu 13.0.10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/swsmu: Update smu v14.0.0 headers to be 14.0.1 compatiblelima1002
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: lima1002 <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/swsmu: add smu 14.0.1 vcn and jpeg msglima1002
add new vcn and jpeg msg v2: squash in updates (Alex) v3: rework code for better compat with other smu14.x variants (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: lima1002 <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/pm: Update SMUv13.0.6 PMFW headersAsad Kamal
Update PMFW interface headers for updated metrics table with pcie link speed and pcie link width Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-12drm/amdgpu: implement smu send rma reason for smu v13.0.6Yang Wang
implement smu send rma reason function for smu v13.0.6 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-22Revert "drm/amd/pm: fix the high voltage and temperature issue"Mario Limonciello
This reverts commit 5f38ac54e60562323ea4abb1bfb37d043ee23357. This causes issues with rebooting and the 7800XT. Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: stable@vger.kernel.org Fixes: 5f38ac54e605 ("drm/amd/pm: fix the high voltage and temperature issue") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/pm: Update metric table for jpeg/vcn dataAsad Kamal
Update pmfw metric table to include vcn & jpeg activity for smu_v_13_0_6 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-03drm/amd/pm: Use separate metric table for APUAsad Kamal
Use separate metric table for APU and Non APU systems for smu_v_13_0_6 to get metric data Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/swsmu: remove duplicate definition of smu v14_0_0 driver if versionLi Ma
There is a repeated define of smu v14_0_0 driver if version, so delete one in driver if header. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.0Ma Jun
Fulfill the SMU13.0.0 support for Wifi RFI mitigation feature. -- v10->v11: - downgrade the prompt level on message failure(Lijo) v13: - Fix the format issue (IIpo Jarvinen) - Move function smu_v13_0_0_set_wbrf_exclusion_ranges to smu_v13_0.c as a generic code for later use (IIpo Jarvinen) Co-developed-by: Evan Quan <quanliangl@hotmail.com> Signed-off-by: Evan Quan <quanliangl@hotmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: add flood detection for wbrf eventsEvan Quan
To protect PMFW from being overloaded. Signed-off-by: Evan Quan <quanliangl@hotmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: setup the framework to support Wifi RFI mitigation featureEvan Quan
With WBRF feature supported, as a driver responding to the frequencies, amdgpu driver is able to do shadow pstate switching to mitigate possible interference(between its (G-)DDR memory clocks and local radio module frequency bands used by Wifi 6/6e/7). -- v1->v2: - update the prompt for feature support(Lijo) v8->v9: - update parameter document for smu_wbrf_event_handler(Simon) v9->v10: v10->v11: - correct the logics for wbrf range sorting(Lijo) v13: - Fix the format issue (IIpo Jarvinen) Signed-off-by: Evan Quan <quanliangl@hotmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: update driver_if and ppsmc headers for coming wbrf featureEvan Quan
Add those data structures to support Wifi RFI mitigation feature. Signed-off-by: Evan Quan <quanliangl@hotmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: Remove redundant function members of pptable_funcsMa Jun
Remove redundant functions members of pptable_funcs and change the function type as static because they are not called by other files. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-12Backmerge tag 'v6.7-rc5' into drm-nextDave Airlie
Linux 6.7-rc5 Alex requested this for some amdkfd work relying on the symbols exports. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-12-06drm/amd/swsmu: update smu v14_0_0 driver if version and metrics tableLi Ma
Increment the driver if version and add new mems to the mertics table. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: optimize RLC powerdown notification on VangoghPerry Yuan
The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: optimize RLC powerdown notification on VangoghPerry Yuan
The smu needs to get the rlc power down message to sync the rlc state with smu, the rlc state updating message need to be sent at while smu begin suspend sequence , otherwise SMU will crash while RLC state is not notified by driver, and rlc state probally changed after that notification, so it needs to notify rlc state to smu at the end of the suspend sequence in amdgpu_device_suspend() that can make sure the rlc state is correctly set to SMU. [ 101.000590] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 101.000598] amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff! [ 110.838026] amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000 [ 110.838035] amdgpu 0000:03:00.0: amdgpu: Failed to disable smu features. [ 110.838039] amdgpu 0000:03:00.0: amdgpu: Fail to disable dpm features! [ 110.838040] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 110.884394] PM: suspend of devices aborted after 21213.620 msecs [ 110.884402] PM: start suspend of devices aborted after 21213.882 msecs [ 110.884405] PM: Some devices failed to suspend, or early wake event detected Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/pm: Add support to fetch pm metrics sampleLijo Lazar
Add API support to fetch a snapshot of power management metrics from PMFW. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/pm: Make smu_v13_0_baco_set_armd3_sequence() staticMa Jun
smu_v13_0_baco_set_armd3_sequence is not used by other files, so make it as static type. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/pm: Update metric table for smu v13_0_6Asad Kamal
Update pmfw metric table to include pcie instantaneous bandwidth & pcie error counters Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-03drm/amd/swsmu: update smu v14_0_0 driver if and metrics tableLi Ma
Update driver if headers and metrics table in smu v14_0_0 after smu fw promotion. Drop the legacy metrics table and add warning of checking pmfw version. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-31drm/amd/pm: fix the high voltage and temperature issueKenneth Feng
fix the high voltage and temperature issue after the driver is unloaded on smu 13.0.0, smu 13.0.7 and smu 13.0.10 v2 - fix the code format and make sure it is used on the unload case only. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-20drm/amd/pm: Support for getting power1_cap_min valueMa Jun
Support for getting power1_cap_min value on smu13 and smu11. For other Asics, we still use 0 as the default value. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-13drm/amd/swsmu: update smu v14_0_0 header files and metrics tableLi Ma
Update driver if, pmfw and ppsmc header files. Add new gpu_metrics_v3_0 for metrics table updated in driver if and reserve legacy metrics table to maintain backward compatibility. --- v1: Update header files and add gpu_metrics_v3_0. v2: Update smu_types.h, smu headers and drop smu_cmn_get_smc_version in smu v14_0_0. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-13drm/amdgpu: add support to power up/down UMSCH by SMULang Yu
Power up/down UMSCH by SMU. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Acked-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 08:00:15 +0000