summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-04-22drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinksGeorge Shen
[Why/How] LTTPR are required to program DPCD 0000Eh to 0x4 (16ms) upon AUX read reply to this register. Since old Sinks witih DPCD rev 1.1 and earlier may not support this register, assume the mandatory value is programmed by the LTTPR to avoid AUX timeout issues. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Fix ACPI edid parsing on some Lenovo systemsMario Limonciello
[Why] The ACPI EDID in the BIOS of a Lenovo laptop includes 3 blocks, but dm_helpers_probe_acpi_edid() has a start that is 'char'. The 3rd block index starts after 255, so it can't be indexed properly. This leads to problems with the display when the EDID is parsed. [How] Change the variable type to 'short' so that larger values can be indexed. Cc: Renjith Pananchikkal <renjith.pananchikkal@amd.com> Reported-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: David Ober <dober@lenovo.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Promote DC to 3.2.329Taimur Hassan
Summary: * Implement HDMI Read request * RMCM and MCM 3DLUT support * Enable urgent latency adjustment on DCN35 * Enable phy-ssc reduction by default Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: enable phy-ssc reduction by defaultRoman Li
[Why] Reduction of phy-ssc is needed to support DP2 high pixel clock on dcn35x/36. There's a special flag to enable it in dmub hw params. [How] Set hbr3_phy_ssc to true for dcn35, dcn351 and dcn36. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Enable urgent latency adjustment on DCN35Nicholas Susanto
[Why] Urgent latency adjustment was disabled on DCN35 due to issues with P0 enablement on some platforms. Without urgent latency, underflows occur when doing certain high timing configurations. After testing, we found that reenabling urgent latency didn't reintroduce p0 support on multiple platforms. [How] renable urgent latency on DCN35 and setting it to 3000 Mhz. This reverts commit 3412860cc4c0c484f53f91b371483e6e4440c3e5. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <nsusanto@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: DCN42 RMCM and MCM 3DLUT supportYihan Zhu
[WHY & HOW] Providing hardware programming for the RMCM and MCM IPs for 3DLUT in DCN42. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: DCN32 null data checkYihan Zhu
[WHY & HOW] Avoid null curve data structure used in the cm block for the potential issue. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Force full update in gpu resetRoman Li
[Why] While system undergoing gpu reset always do full update to sync the dc state before and after reset. [How] Return true in should_reset_plane() if gpu reset detected Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Fix gpu reset in multidisplay configRoman Li
[Why] The indexing of stream_status in dm_gpureset_commit_state() is incorrect. That leads to asserts in multi-display configuration after gpu reset. [How] Adjust the indexing logic to align stream_status with surface_updates. Fixes: cdaae8371aa9 ("drm/amd/display: Handle GPU reset for DC block") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3808 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Move Mode Support Prefetch Checks To Its Own FunctionAustin Zheng
[Why] Large stack size observed in DCN4 mode support when compiling with clang. Additional instrumentation added by compiler adds to stack size. dml_core_mode_support ends up going over the stack size limit due to the size of the function. [How] Move checks and calculations for prefetch to its own function. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Move desync error counter operation up.Jack Chang
[Why & How] Move desync error counter operation up to prevent it from being skipped by force disable desync error. Reviewed-by: Robin Chen <robin.chen@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1Mario Limonciello
[Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Implement HDMI Read RequestChris Park
[Why] Read Request provides alterative method to polling to the HDMI sinks that support it. [How] Implement Read Request where interrupt can be generated by the sink. Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: To apply the adjusted DP ref clock for DP devicesYiling Chen
[Why] For some pixel clock margin sensitive external monitor, we could not keep original DP ref clock for the ASICs supported SSC DP ref clock. [How] From slicon design team's comment, we have to apply the adjusted DP ref clock for DP devices. DP 128b (DP2) signals uses the DTBCLK not DP ref. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amd/display: Add error check for avi and vendor infoframe setup functionWentao Liang
The function fill_stream_properties_from_drm_display_mode() calls the function drm_hdmi_avi_infoframe_from_display_mode() and the function drm_hdmi_vendor_infoframe_from_display_mode(), but does not check its return value. Log the error messages to prevent silent failure if either function fails. Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: add missing DCE6 to dce_version_to_string()Alexandre Demers
Missing DCE 6.0 6.1 and 6.4 are identified as UNKNOWN. Fix this. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: fix typo in bios_parser.cAlexandre Demers
Probably a cut and paste error from using get_integrated_info_v8's comment. This has to be get_integrated_info_v9 Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: fix duplicated value setting in dce100_resource_construct()Alexandre Demers
i2c_speed_in_khz was set twice with the same values. Looking at other DCE versions, we probably wanted to set the value for i2c_speed_in_khz_hdcp. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: add missing parameter name in dce110_clk_src_construct() declarationAlexandre Demers
While not needed per speaking, all the other parameters have names but this one. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: rename function to follow naming convention in dce110Alexandre Demers
The prefix dce110 is used on all functions, but init_pipes() and init_hw(). Under DCN, these sames functions are prefixed. Let's keep thing coherent. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-16drm/amd/display/dml2: use vzalloc rather than kzallocAlex Deucher
The structures are large and they do not require contiguous memory so use vzalloc. Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126 Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 20c50a9a793300a1fc82f3ddd0e3c68f8213fbef) Cc: stable@vger.kernel.org
2025-04-11drm/amd/display/dml2: use vzalloc rather than kzallocAlex Deucher
The structures are large and they do not require contiguous memory so use vzalloc. Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4126 Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-11drm/amd/display: Add htmldocs description for fused_io interfaceRoman Li
[Why] htmldocs build warning: "Function parameter or struct member 'fused_io' not described in 'amdgpu_display_manager'". [How] Add missing description. Fixes: ce801e5d6c1b ("drm/amd/display: HDCP Locality check using DMUB Fused IO") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-10Merge tag 'amd-drm-fixes-6.15-2025-04-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.15-2025-04-09: amdgpu: - MES FW version caching fixes - Only use GTT as a fallback if we already have a backing store - dma_buf fix - IP discovery fix - Replay and PSR with VRR fix - DC FP fixes - eDP fixes - KIQ TLB invalidate fix - Enable dmem groups support - Allow pinning VRAM dma bufs if imports can do P2P - Workload profile fixes - Prevent possible division by 0 in fan handling amdkfd: - Queue reset fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250409165238.1180153-1-alexander.deucher@amd.com
2025-04-09drm/amd/display: pause the workload setting in dmKenneth Feng
Pause the workload setting in dm when doing idle optimization Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b23f81c442ac33af0c808b4bb26333b881669bb7)
2025-04-08drm/amd/display/dc: reclassify DCE6 resources and hw sequencerAlexandre Demers
Classify DCE6 resource and sequencer as they are for other DCE versions Put dce60_resource.c and .h under amd/display/dc/resource/dce60 Put and rename dce60_hw_sequencer.c and .h under amd/display/dc/hwss/dce60 v2: fix build when CONFIG_DRM_AMD_DC_SI=n (Alex) Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amdgpu: fix typos in DCEsAlexandre Demers
In DCE6, DCE8, DCE10, DCE11, "hdp" is replaced by "hpd" and replace "type" by "hpd" for a uniform parameter naming usage across DCEs. In link_factory.c, there is a missing "p" to "types" Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amd/display: pause the workload setting in dmKenneth Feng
Pause the workload setting in dm when doing idle optimization Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Promote DC to 3.2.328Taimur Hassan
Summary: * Optimize custom brightness curve * Correct SSC enable detection for DCN351 * Turn off eDP lcdvdd and backlight if not required * Use DMUB Fused IO interface for HDCP * Extend eDP-on-DP1 quirk list Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: rename IPS2 entry/exit messageSherry Wang
[Why&How] Fix the confusing entry/exit message name for IPS2 Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Sherry Wang <Yao.Wang1@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: [FW Promotion] Release 0.1.5.0Taimur Hassan
Aligning dmub_cmd header with dmu firmware release 0.1.5.0 Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: turn off eDP lcdvdd and backlight if not requiredCharlene Liu
[why] A+N configuration, eDP on A-APU is off, extended display active. Resume from s4, eDP's backlight is still on. [how] Turn off inactive eDP backlight and lcdvdd. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: dont disable dtb as dto src during dpms offAusef Yousof
fix was previously in 25.20 but was reverted out as it was accompanied by other changes that caused regression. [why&how] Disabling dtb as the dto src during dpms off relies on in the same instance being able to also alter the dto src bit to dpref (or not dtb in general), but this was recently changed to only take place in dcn31_program_pix_clk, as that is where we want to perform any dto src changes because tg is off at that point, it is unsafe to do that elsewhere. What this means is now instead of disabling dtb as dto src and modifying source bit, we are left with the configuration for a given tg that specifies dtb as dto src and dtb dto en simultaneously is unset. dcn31_program_pix_clk can rectify this but its possible for us to perform some tg dependant operation that would simply hang because when we go to enable say crtc then, the clk we specify as dto src is "off" en bit is cleared, source bit was never changed, and program_pix_clk hasnt been called yet (as apart of dpms on) We cant disable it as dto src during dpms off if we want the luxury of performing tg dependant operation during dpms off and before dpms on. Reviewed-by: Yihan Zhu <yihan.zhu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: wait for updates to latch before lockingAusef Yousof
[why&how] It is possible for an update to acquire otg lock and begin programming while the previous update has not completed and its values have not latched. The correct way to go about this is to wait until the vupdate pulses so we can be sure that previous updates have latched and we can continue with the current update pipe programming, otherwise during consecutive full updates we will have corruption flash on the screen. The corruption flash occurs specifically on configs that require odm combine, and its local to a specific pipe (will not flash across whole screen). This ticket is across the otg slave, but it may also appear across master. Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`Mario Limonciello
[Why] A variety of the 3DLUT handling functions check `debug.enable_mem_low_power.bits.cm` both in the caller and function. This is unnecessary overhead. [How] For each of them reduce to just checking just in caller or function. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Move PSR support message into amdgpu_dmMario Limonciello
[Why] PSR support could vary from the panels connected to one GPU versus another. [How] Move PSR support message into amdgpu_dm which has the scope of the GPU and use that information. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Adjust all dev_*() messages to drm_*()Mario Limonciello
[Why] dev_*() messages don't show that they are from a driver in drm subsystem. [How] Change all dev_*() messages to drm_*() messages. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: HDCP Locality check using DMUB Fused IODominik Kaszewski
[Why] HDCP locality check has strict timing requirements, currently broken due to reliance on msleep which does not guarantee accuracy. The PR moves the write-poll-read sequence into DMUB using new generic Fused IO interface, where the timing accuracy is greatly improved. New flow is enabled using DCN resource capability bit (none for now), or using a debug flag. [How] * Extended mod_hdcp_config with new function for requesting DMUB to execute a sequence of fused I2C/AUX commands and synchronously wait until an outbox reply arrives or a timeout expires. * If the timeout expires, send an abort to DMUB. * Update HDCP to use the DMUB for locality check if supported. * Add DC_HDCP_LC_FORCE_FW_ENABLE and DC_HDCP_LC_ENABLE_SW_FALLBACK. * Make the first enable new flow regardless of resource capabilities. * Make the second enable fallback to old SW flow. * Clean up makefile source file listings for easier updates. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Correct SSC enable detection for DCN351Kevin Gao
[Why] Due to very small clock register delta between DCN35 and DCN351, clock spread is being checked on the wrong register for DCN351, causing the display driver to believe that DPREFCLK downspread to be disabled when in some stacks it is enabled. This causes the clock values for audio to be incorrect. [How] Both DCN351 and DCN35 use the same clk_mgr, so we modify the DCN35 function that checks for SSC enable to read CLK6 instead of CLK5 when using DCN351. This allows us to read for DPREFCLK downspread correctly so the clock can properly compensate when setting values. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Kevin Gao <kevin.gao3@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Optimize custom brightness curveMario Limonciello
[Why] When BIOS includes a lot of custom brightness data points, walking the entire list can be time consuming. This is most noticed when dragging a power slider. The "higher" values are "slower" to drag around. [How] Move custom brightness calculation loop into a static function. Before starting the loop check the "half way" data point to see how it compares to the input. If greater than the half way data point use that as the starting point instead. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Remove the redundant NULL checkAndrey Vatoropin
Static analysis shows that pointer "timing" cannot be NULL because it points to the object "struct dc_crtc_timing". Remove the extra NULL check. It is meaningless and harms the readability of the code. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: removed unused functionJames Flowers
Removed unused function mpc401_get_3dlut_fast_load_status. Signed-off-by: James Flowers <bold.zone2373@fastmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Promote DAL to 3.2.327Aric Cyr
Summary: * Improve vrr for replay and psr * Rewrite drm debug message * Fix clock issues for dcn32 and dcn401 * Fix mst dsc mode validation issue Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Fix Vertical Interrupt definitions for dcn32, dcn401Dillon Varone
[WHY&HOW] - VUPDATE_NO_LOCK should be used in place of VUPDATE always - Add VERTICAL_INTERRUPT1 and VERTICAL_INTERRUPT2 definitions Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07Revert "drm/amd/display: Fix VUpdate offset calculations for dcn401"Dillon Varone
This reverts commit fe45e2af4a22e569b35b7f45eb9f040f6fbef94f. Reason for revert: it causes stuttering in some usecases. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Fix VUpdate offset calculations for dcn401Dillon Varone
[WHY&HOW] DCN401 uses a different structure to store the VStartup offset used to calculate the VUpdate position, so adjust the calculations to use this value. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Do Not Consider DSC if Valid Config Not FoundFangzhi Zuo
[why] In the mode validation, mst dsc is considered for bw calculation after common dsc config is determined. Currently it considered common dsc config is found if max and min target bpp are non zero which is not accurate. Invalid max and min target bpp values would not get max_kbps and min_kbps calculated, leading to falsefully pass a mode that does not have valid dsc parameters available. [how] Use the return value of decide_dsc_bandwidth_range() to determine whether valid dsc common config is found or not. Prune out modes that do not have valid common dsc config determined. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Add Support for reg inbox0 for host->DMUB CMDsDillon Varone
[WHY] DCN4+ supports a new register based mailbox for sending messages from host to DMCUB. This mailbox supports 64 byte commands, which makes it compatible with the same structure as the frame buffer based mailbox. [HOW] The intention for reg_inbox0 is to be slot in replacement for the frame buffer based mailbox (Inbox1). It supports all of the required features: - Supports all messages handled by FB Inbox1 - Supports multi command batching Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Add a Panel Replay config optionChunTao Tso
[Why] Replay need special policy for the scenario Teams, add a flag to imply apply special policy or not. [How] Add a config option intended for future use for video conferencing applications. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: use drm_warn instead of DRM_WARNAurabindo Pillai
drm_warn prints the drm device instance which is helpful when debugging multi gpu issues Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-17 12:51:25 +0000