summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2022-06-06drm/amd/display: Implement MPO PSR SULeo Li
[WHY] For additional power savings, PSR SU (also referred to as PSR2) can be enabled on eDP panels with PSR SU support. PSR2 saves more power compared to PSR1 by allowing more opportunities for the display hardware to be shut down. In comparison to PSR1, Shut down can now occur in-between frames, as well as in display regions where there is no visible update. In otherwords, it allows for some display hw components to be enabled only for a **selectively updated** region of the visible display. Hence PSR SU. [HOW] To define the SU region, support from the OS is required. OS needs to inform driver of damaged regions that need to be flushed to the eDP panel. Today, such support is lacking in most compositors. Therefore, an in-between solution is to implement PSR SU for MPO and cursor scenarios. The plane bounds can be used to define the damaged region to be flushed to panel. This is achieved by: * Leveraging dm_crtc_state->mpo_requested flag to identify when MPO is enabled. * If MPO is enabled, only add updated plane bounds to dirty region. Determine plane update by either: * Existence of drm damaged clips attached to the plane (added by a damage-aware compositor) * Change in fb id (flip) * Change in plane bounds (position and dimensions) * If cursor is enabled, the old_pos and new_pos of cursor plus cursor size is used as damaged regions(*). (*) Cursor updates follow a different code path through DC. PSR SU for cursor is already implemented in DC, and the only thing required to enable is to set DC_PSR_VERSION_SU_1 on the eDP link. See dcn10_dmub_update_cursor_data(). Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: update cursor position to DMUB FWDavid Zhang
[why] To involve the cursor position into dirty rectangle calculation. [how] - separate plane and cursor update by different DMUB command - send the cursor information while cursor updating, when updating cursor position/attribute, store cursor pos/attr to hubp, and notify dmub FW to exit psr before program cursor registers Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: calculate psr config settings in runtime in DMDavid Zhang
[why] Currently the psr configuration parameters are hardcoded before feeding into the DC helper before passing to DMUB FW. We'd rework to call a shared helper to calculate/update generic psr config fields which are relying on the stream timing and eDP sink PSR caps to avoid hard-coding. [how] - drop part of hard-coded psr config fields by replacing w/ the call of helper from DM before feeding into DC link setup psr helper - For those DM specific psr config fields, e.g. allow smu opt, is not to be set/updated from the shared helper but to rely on the DC feature mask - for the psr version field in psr_config structure, since only the field psr_version of DC link psr_settings matters for that fed to DMUB FW, thus no need to set/update the psr_version field of psr_config structure. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: add shared helpers to update psr config fields to power moduleDavid Zhang
[why] Currently the amdgpu DM psr configuration parameters are hardcoded before feeding into the DC helper to setup PSR. We would define a helper which is to calculate parts of the psr config fields to avoid hard-coding. [how] To make helper shareable, declare and define the helper in the module_helper, to set/update below fields: - psr remote buffer setup time - sdp tx line number deadline - line time in us - su_y_granularity - su_granularity_required - psr_frame_capture_indication_req - psr_exit_link_training_required add another helper to check given the stream context, if there is only one stream and the output is eDP panel connected. changes in v2: ------------------ - add detailed comment for how psr setup time is calculated as per eDP 1.5 spec Cc: Chandan Vurdigerenataraj <chandan.vurdigerenataraj@amd.com> Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: PSRSU+DSC WA for specific TCONDavid Zhang
[why] Some specific TCON chip has HW limitation to support PSRSU+DSC. [how] Force ffu mode when DSC enabled if we detect it is the specific model from sink OUI DPCD. And disable ABM update for this case. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: use HW lock mgr for PSR-SUDavid Zhang
[why] Feature requires synchronization of dig, pipe, and cursor locking between driver and DMUB fw for PSR-SU [how] return True if PSR-SU in the checker should_use_dmub_lock() Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: Set PSR level to enable ALPM by defaultDavid Zhang
[Why & How] While support ALPM, do ALPM state transition while PSR entry/exit. ALPM is needed for PSR-SU feature, and since the function is ready, we'd enable it by default. - Add psr level definition to enable/disable ALPM and set ALPM powerdone mode. - Enable ALPM by default Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: fix system hang when PSR exitsDavid Zhang
[why] When DC driver send PSR exit dmub command to DMUB FW, it might not wait until PSR exit. Then it may hit the following deadlock situation. 1. DC driver send HW LOCK command to DMUB FW due to frame update 2. DMUB FW Set the HW lock 3. DMUB execute PSR exit sequence and stuck at polling DPG Pending register due to the HW Lock is set 4. DC driver ask DMUB FW to unlock HW lock, but DMUB FW is polling DPG pending register [how] The reason why DC driver doesn't wait until PSR exit is because some of the PSR state machine state is not update the dc driver. So when DC driver read back the PSR state, it take the state for PSR inactive. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: add vline time in micro sec to PSR contextDavid Zhang
[why] The current PSR SU programming margin is fixed base on FHD 60HZ panel. If the resolution and refresh rate become higher, the time of current margin might not cover the programming SU time. [how] Notice that the programming SU time is the same among different panels. Instead of fixing the margin with target line number, change the margin unit to micro second which indicate the time needed for programming SU. Then FW set the margin line number base on the line time and margin time. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: Set default value of line_capture_indicationDavid Zhang
[Why & how] We only support line capture indication as 0 for PSRSU Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: Passing Y-granularity to dmub fwDavid Zhang
[Why] The Y-granularity panel parameter indicate the grid pattern granularity in the Y direction for PSRSU. [How] Send the Y-granularity data by PSR_COPY_SETTINGS dmub command. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: program PSR2 DPCD ConfigurationDavid Zhang
[Why] To support PSR2 Source DPCD configuration [How] Update the PSR2 Source DPCD settings while the PSR2 enabled Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: revise Start/End SDP dataDavid Zhang
[why & how] We need to implement the VSC packet rev4 that is required by PSRSU. Follow the eDP 1.5 spec pg. 257 changes in v2: ------------------- - set vsc packet rev2 for PSR1 Cc: Chandan Vurdigerenataraj <chandan.vurdigerenataraj@amd.com> Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: update GSP1 generic info packet for PSRSUDavid Zhang
[why & how] Based on PSRSU specification, every selective update frame need to use two SDP to indicate the frame active range. So we occupy another GSP1 for PSRSU execution. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: combine dirty rectangles in DMUB FWDavid Zhang
[why] In PSR-SU design, the DMUB FW handles the combination of multiple dirty rectangles. [how] - create DC dmub update dirty rectangle helper which sends the dirty rectangles per pipe from DC to DMUB, and DMUB FW will handle to combine the dirty RECTs - call the helper from DC commit plane update function. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: feed PSR-SU as psr version to dmub FWDavid Zhang
[why & how] set psr version as PSR-SU in kernel-FW interface function to ensure the correct dmub command parameter is fed into FW. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: align dmub cmd header to latest dmub FW to support PSR-SUDavid Zhang
[why] PSR-SU is implemented in upstreamed dmub FW but not enabled on DM and DC. We'd add necessary and missing definitions in dmub cmd header to align w/ the up-to-date DMUB FW for PSR-SU support. [how] Add definitions and items below into dmub cmd header: - DMUB psr version enumeration for PSR-SU - dirty rectangle structure - psr debug flag of forcing full frame update - dmub command of updating dirty rectangle and cursor infor - dmub psr command type of setting sink vtotal in PSR active - dmub psr su debug flags structure - dmub cmd structure for - updating dirty rectangle - cursor infor - setting sink vtotal - dmub ringbuffer command items Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amdgpu/display: Protect some functions with CONFIG_DRM_AMD_DC_DCNAlex Deucher
Protect remove_hpo_dp_link_enc_from_ctx() and release_hpo_dp_link_enc() with CONFIG_DRM_AMD_DC_DCN as the functions are only called from code that is protected by CONFIG_DRM_AMD_DC_DCN. Fixes build fail with -Werror=unused-function. Fixes: 9b0e0d433f74 ("drm/amd/display: Add dependant changes for DCN32/321") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
2022-06-03drm/amd/display: Add ODM seamless boot supportDuncan Ma
Revised validation logic when marking for seamless boot. Init resources accordingly when Pre-OS has ODM enabled. Reset ODM when transitioning Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set odm accordingly upon commit. Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Implement DTBCLK ref switching on dcn32Alvin Lee
[WHY & HOW] Implements DTB ref clock switching with reg key default to OFF. Refactors dccg DTBCLK logic to not store redundant state information dccg. Also removes duplicated functions that should be inherited from other dcn versions. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Match dprefclk with clk registersSamson Tam
Update base.dprefclk_khz to match result from dcn32_dump_clk_registers() Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: cleaning up smu_if to add future flexibilityMartin Leung
This commit cleans up code that uses old variables and adds some SMU interfaces for future flexibility. Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: update disp pattern generator routine for DCN30Aurabindo Pillai
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Updates for OTG and DCCG clocksSamson Tam
Use DTBCLK for valid pixel clock generation Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: FCLK P-state support updatesChaitanya Dhere
[Why] Previously we used to send FCLK P-state enable messages upon each call to update_clocks based on dml output. This resulted in increased message transactions between DC and PMFW. [How] Update the code to check safe_to_lower status and send the message based on dml input only on boot. This reduces message transactions. Also remove other unwanted code based on current code status. Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Introduce new update_clocks logicJun Lei
[why] DCN has sidebands to control some clocks, it is useful for clk_mgr to always update the clocks it explicitly controls rather than skip them because it enables more configurations to work without SMU [how] only skip handling clocks where SMU manages the frequency for clocks with DENTIST sideband (DISP/DPP), only skip the voltage request when SMU not available, but otherwise proceed normally Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: set link fec status during init for DCN32Jingwen Zhu
We can now enable FEC. Signed-off-by: Jingwen Zhu <Jingwen.Zhu@github.amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add new pixel rate programmingJun Lei
[why] New dividers in DCCG need to be programmed depending on encoder/stream type since pixels per clock in OTG/DIO is different DIO also needs additional programming depending on pixels per clock Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2022-06-03drm/amd/display: Remove W/A for ODM memory pinsAlvin Lee
[Description] By default we can now set ODM_MEM_VBLANK_PWR_MODE=1 Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: do not override CURSOR_REQ_MODE when SubVP is not enabledSamson Tam
[Why] HUBP_UNBOUNDED_REQ_MODE and CURSOR_REQ_MODE are normally set together. In hubp32_prepare_subvp_buffering() call, CURSOR_REQ_MODE is set based on whether SubVP is enabled or not. For non MPO case, both REQ_MODE registers are set to 1. But since SubVP is not enabled, then CURSOR_REQ_MODE is set to 0, overriding the previous value. [How] Do not set CURSOR_REQ_MODE to 0 if SubVP is not enabled. This will allow CURSOR_REQ_MODE to stay as 1 in the non MPO case. Add note to follow up and check case for single pipe MPO and SubVP enabled as this would cause both REQ_MODE registers to be set to 0 but SubVP enabled would override CURSOR_REQ_MODE to 1. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: change dsc image width cap for dcn32 and dcn321Dillon Varone
Set appropriate caps for DCN3.2.x. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Disable DTB Ref Clock Switching in dcn32Dillon Varone
[How & Why] To be enabled once PMFW supports it. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: set dram speed for all statesDillon Varone
[WHY?] If higher states have memory speed set to 0 MT/s currently they do not get set to the highest value which can cause validation failures. [HOW?] Set unpopulated higher states to max value. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Halve DTB Clock Value for DCN32Fangzhi Zuo
VBIOS default clock value was halved, so the hardcoded dtb value should be halved as well. dtb clock should come from SMU eventually, but now dtb clock switching is not fully supported yet in SMU. Halve the dtb hardcoded value for now to have UHBR10 light up. Will rely on SMU for dtb clock switching once available. The w/a is for DCN32 only, DCN321 should adopt the original value. Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add additional guard for FCLK pstate message for DCN321Dillon Varone
Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Ensure that DMCUB fw in use is loaded by DC and not VBIOSDillon Varone
[Why?] On wake from S3/S4, driver checks if DMUB is initialized. On S4 VBIOS loads DMUB, and driver does not reload as it appears to be initialized already. [How?] Add a check for the DAL_FW bit to ensure that loaded FW is from driver and not VBIOS. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: use updated clock source init routineCharlene Liu
[why] Use correct clock source initialization routine for DCN32/321 Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Select correct DTO sourceDillon Varone
[WHY&HOW] Change criteria for setting DTO source value, and always set it regardless of the signal type. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: disable idle optimizationsAurabindo Pillai
Disable idle optimizations until SMU can handle them to prevent DMUB timeout and subsequent system freeze Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add missing interrupt handlers for DCN32/DCN321Aurabindo Pillai
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Implement WM table transfer for DCN32/DCN321Alvin Lee
Add support for watermark table transfers. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Various DML fixes to enable higher timingsDillon Varone
Fixes to enable higher rate timings for DCN3.2.x. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add guard for FCLK pstate message to PMFW for DCN321Dillon Varone
[WHY?] DCN321 does not support FCLK DPM, and thus it should not send messages to PMFW regarding it. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Use DTBCLK for valid pixel clockEric Bernstein
Use DTBCLK for valid pixel clock generation Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add missing instance for clock source registerAlvin Lee
[Description] Need to add inst 5 for clk_src_regs because there are 5 PHY instances in DCN32 & DCN321. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Fix USBC link creationDillon Varone
[Description] Add USBC connector ID to align with new VBIOS parsing. Add seperate DCN321 link encoder due to different PHY version affecting DP ALT related registers. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd: Add GFX11 modifiers support to AMDGPU (v3)Aurabindo Pillai
GFX11 IP introduces new tiling mode. Various combinations of DCC settings are possible and the most preferred settings must be exposed for optimal use of the hardware. add_gfx11_modifiers() is based on recommendation from Marek for the preferred tiling modifier that are most efficient for the hardware. v2: microtiling fix noticed by Marek v3: keep Z tiling check Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add DM support for DCN32/DCN321Aurabindo Pillai
Add Display Manager specific changes for DCN3.2.x. DM handles the interaction between the core DC modesetting code and the drm modesetting infrastructure. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add DCN32/321 specific files for Display CoreAurabindo Pillai
Add core DC support for DCN 3.2.x. v2: squash in fixup (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 08:52:13 +0000