summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2019-10-17drm/amd/display: update register field access mechanismabdoulaye berthe
1-add timeout length and multiplier fields to aux_control1 register 2-update access mechanism from macro constructed name to uint32_t defined addresses. 3-define registers and field per asic family Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amd/display: add NULL checks for clock manager pointerAhzo
This fixes kernel NULL pointer dereferences on shutdown: RIP: 0010:build_audio_output.isra.0+0x97/0x110 [amdgpu] RIP: 0010:enable_link_dp+0x186/0x300 [amdgpu] Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Ahzo <Ahzo@tutanota.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: fix build error casused by CONFIG_DRM_AMD_DC_DCN2_1Hersen Wu
when CONFIG_DRM_AMD_DC_DCN2_1 is not enable in .config, there is build error. struct dpm_clocks shoud not be guarded. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: hook renoir dc to pplib funcsHersen Wu
enable dc get dmp clock table and set dcn watermarks via pplib. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/powerplay: add renoir funcs to support dcHersen Wu
there are two paths for renoir dc access smu. one dc access smu directly using bios smc interface: set disply, dprefclk, etc. another goes through pplib for get dpm clock table and set watermmark. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-15drm/amdgpu/display: clean up dcn2*_pp_smu functionsAlex Deucher
Use the dcn21 functions in dcn21_resource.c and make the dcn20 functions static since they are only used in dcn20_resource now. Cc: bhawanpreet.lakha@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Use swap() where appropriateVille Syrjälä
Mostly a cocci-job, but it flat out refused to remove the declaration in drivers/gpu/drm/amd/display/dc/core/dc.c so had to do that part manually. @swap@ identifier TEMP; expression A,B; @@ - TEMP = A; - A = B; - B = TEMP; + swap(A, B); @@ type T; identifier swap.TEMP; @@ ( - T TEMP; | - T TEMP = {...}; ) ... when != TEMP Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add renoir specific watermark range and clk helperDmytro Laktyushkin
Doing this allows us to split it for diffrent asics. This design will be helpful for future Asciis. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: hook up notify watermark ranges and get clock tableEric Yang
[Why] Previously SMU was giving us 0s for the clock table. Now they have valid clock table. We should use theirs. Also, need to send SMU watermark ranges for selecting optimal watermarks. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Skip DIG Check if Link is Virtual for Display CountSung Lee
[WHY] Without a check for virtual links, every link's DIG was getting checked for enabled or disabled. If link was virtual, since it did not have a DIG, this would cause issues. [HOW] Skip DIG Enable check if link is virtual and add virtual link to to display count. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: correct stream LTE_340MCSC_SCRAMBLE valueWayne Lin
[Why] HDMI 2.0 requires scrambling under specific conditions. We refer to stream property LTE_340MCSC_SCRAMBLE to determine whether en/dis scrambling. While creating stream for sink, we setup LTE_340MCSC_SCRAMBLE by referring to edid_caps. However, dm_helpers_parse_edid_caps() doesn't construct HDMI Forum block data for edid_caps. Moreover, fill_stream_properties_from_drm_display_mode() aslo unconsciously clear the LTE_340MCSC_SCRAMBLE flag. [How] Drm already provides drm_display_info to refer HDMI Forum vsdb info. Set stream LTE_340MCSC_SCRAMBLE by drm_display_info and remove memset in fill_stream_properties_from_drm_display_mode() Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Fix dongle_caps containing stale information.David Galiffi
[WHY] During detection: function: get_active_converter_info populates link->dpcd_caps.dongle_caps only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS. Otherwise, it is not cleared, and stale information remains. During mode validation: function: dp_active_dongle_validate_timing reads link->dpcd_caps.dongle_caps->dongle_type to determine the maximum pixel clock to support. This information is now stale and no longer valid. [HOW] dp_active_dongle_validate_timing should be using link->dpcd_caps->dongle_type instead. Signed-off-by: David Galiffi <david.galiffi@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Add capability check for static ramp calcJaehyun Chung
[Why] Static ramp to max refresh rate does not have capability check on calculated v_total. Programming a lower v_total_min and max than the total causes continuous spurious HPDs. [How] Add a capability check after v_total calculation similar to calculate v_total helper functions. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: 3.2.54Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: make aux defer delay and aux sw start delay seperateXiaodong Yan
[why] 1. defer delay and sw start delay has been mixed up, defer delay was programmed to AUX_SW_CONTROL:AUX_SW_START_DELAY. 2. There's no delay for defer [how] 1. Set aux sw start to 0 2. Add delay for defer scenario Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: use vbios message to call smu for dpm levelCharlene Liu
[Description] use vbios message to call smu for dpm level also only program dmdata in vsyncflip as HW requirement. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Fix maybe-uninitialized warningLeo Li
[Why] Compiling with GCC 9.1.0 gives the following warning (I have warnings-as-errors enabled): drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc.c: In function 'dc_validate_seamless_boot_timing': drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc.c:1180:8: error: 'se' may be used uninitialized in this function [-Werror=maybe-uninitialized] 1180 | if (!se->funcs->dp_get_pixel_format( | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1181 | se, | ~~~ 1182 | &hw_crtc_timing.pixel_encoding, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1183 | &hw_crtc_timing.display_color_depth)) [How] Initialize se to NULL. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add more checks to validate seamless boot timingMartin Leung
[why] we found using an active DP to HDMI panel that we weren't validating dp_pixel_format and hardware timing v_front_porch, causing screen to blank and/or corrupt while attempting a seamless boot. [how] added checks during dc_validate_seamless_boot_timing for these values Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add new active dongle to existent w/aVitaly Prosyak
[Why & How] Dongle 0x00E04C power down all internal circuits including AUX communication preventing reading DPCD table. Encoder will skip DP RX power down on disable output to keep receiver powered all the time. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Update number of dcn21 audio endpointsMichael Strauss
[WHY] Number of audio endpoints wasn't updated from dcn20's 6 when created [HOW] Changed num_audio to 4 to match the correct sbios value Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add guard for SMU ver, for 48mhz clkJoseph Gravenor
[why] dp_48m_refclk_driver_pwdn is persistent through S3 and S5. This was worked arround in SMU FW 55.21.0. Earlier FW don't have this fix so we will hang on reboot [how] add a guard for smu versions before SMU FW 55.21.0 Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: fix code to control 48mhz refclkEric Yang
[Why] The SMU message to enable this feature looks at argument. Previous code didn't send right argument. This change will allow the feature to be be enabled. [How] Fixed one issue where SMU message to enable the feature was sent without setting the parameter. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: exit PSR during detectionEric Yang
[Why] If 48mhz refclk is turned off during PSR, we will have issue doing link training during detection. [How] Get out of PSR before detection Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Program DWB watermarks from correct stateJulian Parkin
[Why] When diags adds a DWB via a stream update, we calculate MMHUBBUB paramaters, but dc->current_state has not yet been updated when the DWB programming happens. This leads to overflow on high bandwidth tests since the incorrect MMHUBBUB arbitration parameters are programmed. [How] Pass the updated context down to the (enable|update)_writeback functions so that they can use the correct watermarks when programming MMHUBBUB. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: 3.2.53Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Use dcn1 Optimal Taps GetWesley Chalmers
[WHY] dpp2_get_optimal_number_of_taps is incorrect, and dcn2 should be using dpp1_get_optimal_number_of_taps instead Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: fix bug with check for HPD Low in verify link capSivapiriyan Kumarasamy
[Why] There is a bug when determining if link training should be retried when HPD is low in dp_verify_link_cap_with_retries. [How] Correctly, fail dp_verify_link_cap_with_retries without retry when HPD is low. Signed-off-by: Sivapiriyan Kumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: wait for set pipe mcp command completionJosip Pavic
[Why] When the driver sends a pipe set command to the DMCU FW, it does not wait for the command to complete. This can lead to unpredictable behavior if, for example, the driver were to request a pipe disable to the FW via MCP, then power down some hardware before the firmware has completed processing the command. [How] Wait for the DMCU FW to finish processing set pipe commands Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Add output bitrate to DML calculationsNikola Cornij
[why] Output bitrate was mistakenly left out, causing corruption on some DSC low resolution (such as 800x600) modes. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Properly round nominal frequency for SPDAric Cyr
[Why] Some displays rely on the SPD verticle frequency maximum value. Must round the calculated refresh rate to the nearest integer. [How] Round the nominal calculated refresh rate to the nearest whole integer. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Restore should_update_pstate_support after bad revertJoshua Aberback
[Why] This function was mistakenly reverted as part of a legitimate revert. The old version that was reverted to has bad logic, and is causing situations where p-state change support is being toggled when it shouldn't be, resulting in hangs. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: check phy dpalt lane count configLewis Huang
[Why] Type-c PHY config is not align with dpcd lane count. When those values didn't match, it cause driver do link training with 4 lane but phy only can output 2 lane. The link trainig always fail. [How] 1. Modify get_max_link_cap function. According DPALT_DP4 to update max lane count. 2. Add dp_mst_verify_link_cap to handle MST case because we didn't call dp_mst_verify_link_cap for MST case. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: build up VSIF infopacketWayne Lin
[Why] Didn't send VSIF infopacket when it's 4k mode defined in HDMI 1.4b. For HDMI 1.4b, While displaying 4k modes, it should send VSP. [How] Call mod_build_hf_vsif_infopacket() function to build info frame and send it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: 3.2.52Anthony Koo
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Add missing shifts and masks for dpp registers on dcn2Joshua Aberback
[Why] The register CM_TEST_DEBUG_DATA is used in dpp1_program_input_csc, which is called from dpp2_cnv_setup, but the shifts and masks for the fields of that register are not initialized for dcn2. This causes all reads of that register to return 0. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jaehyun Chung <Jaehyun.Chung@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add explicit comparator as default optimization checkJun Lei
[why] memcmp is vulnerable to regression due to dc_clocks structures not being organized properly (not "current" clock related structures being at the beginning of the structure) and causes unnecessary setting of the optimize bit [how] add a dcn sepcific comparator, implement for dcn2 Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: add support for VSIP info packetWayne Lin
[Why] The vendor specific infoframe is needed for HDMI while displaying specific modes. DC supports sending it, but we aren't currently building it [How] Add mod_build_hf_vsif_infopacket() to build the vendor specific info packet. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: fix hotplug during display offJoseph Gravenor
[why] HPD is not suppressed when we lower clocks on renoir. B/c of this we do link training when the 48mhz refclk is off, which will cause ASIC hang. [how] Exit optimized power state for detection purpose. Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: fix pipe re-assignment when odm presentDmytro Laktyushkin
Currently pipe split may steal an existing ODM pipe depending on stream sequence. This change prevents that from happening as easily. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Gary Kattan <Gary.Kattan@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Reprogram FMT on pipe changeJulian Parkin
[Why] When planes are added or removed from a stream, the change in pipe usage from dynamic MPC combine can cause a second stream using ODM combine to pick a different pipe to combine with. In this scenario, a different OPP is connected to the ODM without programming its FMT. [How] Reprogram the FMT in dcn20_program_pipe whenever a pipe is newly enabled, or when its opp changes. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Update V_UPDATE whenever VSTARTUP changesAric Cyr
[Why] If VSTARTUP changes due to bandwidth requirements, we must recalculate and update VLINE2 as well for proper flip reporting. [How] After all calls to program_global_sync which reconfigures VSTARTUP, also make sure to update V_UPDATE (i.e. VLINE2 on DCNx). Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Add Logging for Gamma Related informationWyatt Wood
[Why] A recent bug showed that logging would be useful in debugging various gamma issues. [How] Fix formatting for easier graphing. Prevent performance hit when doing diag. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: skip enable stream on disconnected displayWenjing Liu
[why] Virtual signal means there is no display attached. In this case we will assign a virtual signal type to the stream. We should only enable the front end of the stream but not the back end. [how] When stream is enabling with virtual signal type, skip backend programming. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Correct values in AVI infoframeWayne Lin
[Why] While displaying 4k modes defined in HDMI1.4b, should set VIC to 0 and use VSP HDMI_VIC to indicate the mode. [How] Use functions defined in drm to set up the VIC correspondingly. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: Added pixel dynamic expansion control.Robin Singh
[Why] To compare the crc of the framebuffer data at input of display pipeline with the crc of the otg, we need to disable pixel formatter's dynamic expansion feature during crc capture and keep it enable in the normal operation. [HOW] Expose a new interface in DM and dc for pixel formatter (fmt dynamic bitdepth expansion control). Interface control the FMT_DYNAMIC_EXP_EN bit, during crc capture keep it disabled. Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-11Merge tag 'drm-misc-next-2019-10-09-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.5: UAPI Changes: -Colorspace: Expose different prop values for DP vs. HDMI (Gwan-gyeong Mun) -fourcc: Add DRM_FORMAT_MOD_ARM_16X16_BLOCK_U_INTERLEAVED (Raymond) -not_actually: s/ENOTSUPP/EOPNOTSUPP/ in drm_edid and drm_mipi_dbi. This should not reach userspace, but adding here to specifically call that out (Daniel) -i810: Prevent underflow in dispatch ioctls (Dan) -komeda: Add ACLK sysfs attribute (Mihail) -v3d: Allow userspace to clean up after render jobs (Iago) Cross-subsystem Changes: -MAINTAINERS: -Add Alyssa & Steven as panfrost reviewers (Rob) -Add Jernej as DE2 reviewer (Maxime) -Add Chen-Yu as Allwinner maintainer (Maxime) -staging: Make some stack arrays static const (Colin) Core Changes: -ttm: Allow drivers to specify their vma manager (to use gem mgr) (Gerd) -docs: Various fixes in connector/encoder/bridge docs (Daniel, Lyude, Laurent) -connector: Allow more than 3 possible encoders for a connector (José) -dp_cec: Allow a connector to be associated with a cec device (Dariusz) -various: Fix some compile/sparse warnings (Ville) -mm: Ensure mm node removals are properly serialised (Chris) -panel: Specify the type of panel for drm_panels for later use (Laurent) -panel: Use drm_panel_init to init device and funcs (Laurent) -mst: Refactors and cleanups in anticipation of suspend/resume support (Lyude) -vram: -Add lazy unmapping for gem bo's (Thomas) -Unify and rationalize vram mm and gem vram (Thomas) -Expose vmap and vunmap for gem vram objects (Thomas) -Allow objects to be pinned at the top of vram to avoid fragmentation (Thomas) Driver Changes: -various: Include drm_bridge.h instead of relying on drm_crtc.h (Boris) -ast/mgag200: Refactor show_cursor(), move cursor to top of video mem (Thomas) -komeda: -Add error event printing (behind CONFIG) and reg dump support (Lowry) -Add suspend/resume support (Lowry) -Workaround D71 shadow registers not flushing on disable (Lowry) -meson: Add suspend/resume support (Neil) -omap: Miscellaneous refactors and improvements (Tomi/Jyri) -panfrost/shmem: Silence lockdep by using mutex_trylock (Rob) -panfrost: Miscellaneous small fixes (Rob/Steven) -sti: Fix warnings (Benjamin/Linus) -sun4i: -Add vcc-dsi regulator to sun6i_mipi_dsi (Jagan) -A few patches to figure out the DRQ/start delay calc on dsi (Jagan/Icenowy) -virtio: -Add module param to switch resource reuse workaround on/off (Gerd) -Avoid calling vmexit while holding spinlock (Gerd) -Use gem shmem helpers instead of ttm (Gerd) -Accommodate command buffer allocations too big for cma (David) Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Raymond Smith <raymond.smith@arm.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Colin Ian King <colin.king@canonical.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Lowry Li <Lowry.Li@arm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: David Riley <davidriley@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 10 Oct 2019 01:00:47 AM AEST # gpg: using RSA key 732C002572DCAF79 # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c # drivers/gpu/drm/i915/i915_drv.c # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/i915_gem_gtt.c # drivers/gpu/drm/i915/i915_vma.c From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191009150825.GA227673@art_vandelay
2019-10-07drm/amd: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07drm/amd/display: Remove set but not used variables 'pp_smu', 'old_pipe'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c: In function dce110_enable_audio_stream: drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:949:23: warning: variable pp_smu set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c: In function dce110_disable_audio_stream: drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:983:23: warning: variable pp_smu set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c: In function dce110_program_front_end_for_pipe: drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:2429:19: warning: variable old_pipe set but not used [-Wunused-but-set-variable] 'pp_smu' is not used since commit 170a2398d2d8 ("drm/amd/display: make clk_mgr call enable_pme_wa") 'old_pipe' is not used since commit 65d38262b3e8 ("drm/amd/display: fbc state could not reach while enable fbc") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07drm/amd/display: Remove set but not used variable 'pixel_width'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c: In function dpp2_get_optimal_number_of_taps: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dpp.c:359:11: warning: variable pixel_width set but not used [-Wunused-but-set-variable] It is not used since commit f7de96ee8b5f ("drm/amd/display: Add DCN2 DPP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-07drm/amd/display: Remove set but not used variables 'h_ratio_chroma', ↵zhengbin
'v_ratio_chroma' Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dwb_scl.c: In function dwb_program_horz_scalar: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dwb_scl.c:725:11: warning: variable h_ratio_chroma set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dwb_scl.c: In function dwb_program_vert_scalar: drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dwb_scl.c:806:11: warning: variable v_ratio_chroma set but not used [-Wunused-but-set-variable] They are not used since commit 345429a67c48 ("drm/amd/display: Add DCN2 DWB") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:29:04 +0000