summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2025-02-12drm/amd/display: Update CR AUX RD interval interpretationGeorge Shen
[Why] DP spec updated to have the CR AUX RD interval match the EQ AUX RD interval interpretation of DPCD 0000Eh/0220Eh for 8b/10b non-LTTPR mode and LTTPR transparent mode cases. [How] Update interpretation of DPCD 0000Eh/0220Eh for CR AUX RD interval during 8b/10b link training. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Initial psr_version with correct settingTom Chung
[Why & How] The initial setting for psr_version is not correct while create a virtual link. The default psr_version should be DC_PSR_VERSION_UNSUPPORTED. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Refactor mark_seamless_boot_stream()Mario Limonciello
mark_seamless_boot_stream() can be called multiple times to run the more expensive checks in dc_validate_boot_timing(). Refactor the function so that if those have already passed once the function isn't called again. Also add a message the first time that they have passed to let the user know the stream will be used for seamless boot. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add new log type `DC_LOG_INFO`Mario Limonciello
`DC_LOG_INFO` will wrap `drm_info()` and be used for the typical `INFO` level printk messages but in DC code. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Decrease message about seamless boot enabled to debugMario Limonciello
The message in amdgpu_dm about seamless boot is about an ASIC version check and module parameter check. It doesn't actually mean that seamless boot will work. Push this message into debug to avoid being disingenuous about it working until it's been tested. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add debug messages for dc_validate_boot_timing()Mario Limonciello
dc_validate_boot_timing() runs through an exhaustive list of checks to determine whether a boot stream can be marked as seamless. When the checks fail, a user will be left guessing what the reason was Add debug statements that will be helpful to validate the specific reason. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Link: https://lore.kernel.org/r/20250120194903.1048811-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: 3.2.317Aric Cyr
This version brings along following fixes: - Reverse the visual confirm recouts - Exclude clkoffset and ips setting for dcn351 specific - Fix cursor programming problems - Increase block_sequence array size - Use Nominal vBlank to determine vstartup if Provided - Fix clock frequencies incorrect problems for dcn401 - Add SDP programming for UHBR link as well - Support "Broadcast RGB" drm property Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Reverse the visual confirm recoutsPeterson Guo
[WHY] When checking if a pipe can disable cursor to prevent duplicate cursors, having visual confirm on will prevent disabling cursors on planes which cover the bottom of the screen. [HOW] When checking if a plane can disable visual confirm, the pipe first reverses these calculations before doing the checks. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Peterson Guo <peterson.guo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Exclude clkoffset and ips setting for dcn351 specificCharlene Liu
Exclude clock offset and IPS setting for dcn351 specific only. Reviewed-by: Syed Hassan <syed.hassan@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Increase block_sequence array sizeJoshua Aberback
[Why] It's possible to generate more than 50 steps in hwss_build_fast_sequence, for example with a 6-pipe asic where all pipes are in one MPC chain. This overflows the block_sequence buffer and corrupts block_sequence_steps, causing a crash. [How] Expand block_sequence to 100 items. A naive upper bound on the possible number of steps for a 6-pipe asic, ignoring the potential for steps to be mutually exclusive, is 91 with current code, therefore 100 is sufficient. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Use Nominal vBlank If Provided Instead Of Capping ItAustin Zheng
[Why/How] vBlank used to determine the max vStartup is based on the smallest between the vblank provided by the timing and vblank in ip_caps. Extra vblank time is not considered if the vblank provided by the timing ends up being higher than what's defined by the ip_caps Use 1 less than the vblank size in case the timing is interlaced so vstartup will always be less than vblank_nom. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Populate register address for dentist for dcn401Dillon Varone
[WHY&HOW] Address was not previously populated which can result in incorrect clock frequencies being read on boot. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Add AS SDP programming for UHBR link rate.Ian Chen
Add SDP programming for UHB link as well. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: log destination of vertical interruptJosip Pavic
[Why] Knowing the destination of OTG's vertical interrupt 2 is useful for debugging, but it is not currently included in the OTG state readback logic [How] Read the OTG interrupt destination register to get the vertical interrupt 2 destination on ASICs that have this register when reading back the OTG state from hardware Reviewed-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: Support "Broadcast RGB" drm propertyYan Li
[WHY] The source device outputs a full RGB signal, but TV may be set to use limited RGB. The mismatch in color range leads to a degradation in image quality. Display driver should have the ability to switch between the full and limited RGB to match TV's settings. [HOW] Add support of the linux DRM "Broadcast RGB" property, which indicates the Quantization Range (Full vs Limited) used. User space can set this property to be "Automatic", "Full" or "Limited 16:235" to adjust the output color range. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display: remove extraneous ; after statementsColin Ian King
There are a couple of statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dc: enable oem i2c support for DCE 12.xAlex Deucher
Use the value pulled from the vbios just like newer chips. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dc: add support for oem i2c in atom_firmware_info_v3_1Alex Deucher
The fields are marked as reserved in atom_firmware_info_v3_1, but thet contain valid data in all of the vbios images I've looked at so add parse these fields as per atom_firmware_info_v3_2. The offsets are the same and the reset of the structure is the same. v2: squash in NULL checks Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: add support for OEM i2c busAlex Deucher
Expose the OEM i2c bus on boards that support it. This bus is used for OEM specific features like RGB, etc. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: handle OEM i2c buses in i2c functionsAlex Deucher
Allow the creation of an OEM i2c bus and use the proper DC helpers for that case. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dc: add a new helper to fetch the OEM ddc_serviceAlex Deucher
This is the i2c bus used by OEMs for board specific i2c features like RGB. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop hw_support check in amdgpu_dm_i2c_xfer()Alex Deucher
DC supports SW i2c as well. Drop the check. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-12drm/amd/display/dm: drop extra parameters to create_i2c()Alex Deucher
link_index can be fetched from the ddc_service; no need for a separate parameter. res is not used. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-06Merge drm/drm-next into drm-misc-nextMaxime Ripard
Bring rc1 to start the new release dev. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-02-04Revert "drm/amd/display: Use HW lock mgr for PSR1"Tom Chung
This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-04drm/amd/display: Respect user's CONFIG_FRAME_WARN more for dml filesNathan Chancellor
Currently, there are several files in drm/amd/display that aim to have a higher -Wframe-larger-than value to avoid instances of that warning with a lower value from the user's configuration. However, with the way that it is currently implemented, it does not respect the user's request via CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain when new instances of the warning appear and break the build due to CONFIG_WERROR. Adjust the logic to switch from a hard coded -Wframe-larger-than value to only using the value as a minimum clamp and deferring to the requested value from CONFIG_FRAME_WARN if it is higher. Suggested-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-03drm/amd/display: Fix seamless boot sequenceLo-an Chen
[WHY] When the system powers up eDP with external monitors in seamless boot sequence, stutter get enabled before TTU and HUBP registers being programmed, which resulting in underflow. [HOW] Enable TTU in hubp_init. Change the sequence that do not perpare_bandwidth and optimize_bandwidth while having seamless boot streams. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-03drm/amd/display: Fix out-of-bound accessesAlex Hung
[WHAT & HOW] hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4), but location can have size up to 6. As a result, it is necessary to check location against MAX_HPO_DP2_ENCODERS. Similiarly, disp_cfg_stream_location can be used as an array index which should be 0..5, so the ASSERT's conditions should be less without equal. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904 Reviewed-by: Austin Zheng <Austin.Zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-28drm/amd/display: restore invalid MSA timing check for freesyncMelissa Wen
This restores the original behavior that gets min/max freq from EDID and only set DP/eDP connector as freesync capable if "sink device is capable of rendering incoming video stream without MSA timing parameters", i.e., `allow_invalid_MSA_timing_params` is true. The condition was mistakenly removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP"). CC: Mario Limonciello <mario.limonciello@amd.com> CC: Alex Hung <alex.hung@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915 Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-28drm/amd/display: Correct register address in dcn35loanchen
[Why] the offset address of mmCLK5_spll_field_8 was incorrect for dcn35 which causes SSC not to be enabled. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Lo-An Chen <lo-an.chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2025-01-24drm/amd/display: Optimize cursor position updatesAric Cyr
[why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position. [how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Add hubp cache reset when powergatingAric Cyr
[Why] When HUBP is power gated, the SW state can get out of sync with the hardware state causing cursor to not be programmed correctly. [How] Similar to DPP, add a HUBP reset function which is called wherever HUBP is initialized or powergated. This function will clear the cursor position and attribute cache allowing for proper programming when the HUBP is brought back up. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changedSrinivasan Shanmugam
The function amdgpu_dm_crtc_mem_type_changed was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that new_plane_state and old_plane_state are valid before dereferencing them. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:11486 amdgpu_dm_crtc_mem_type_changed() error: 'new_plane_state' dereferencing possible ERR_PTR() drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 11475 static bool amdgpu_dm_crtc_mem_type_changed(struct drm_device *dev, 11476 struct drm_atomic_state *state, 11477 struct drm_crtc_state *crtc_state) 11478 { 11479 struct drm_plane *plane; 11480 struct drm_plane_state *new_plane_state, *old_plane_state; 11481 11482 drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { 11483 new_plane_state = drm_atomic_get_plane_state(state, plane); 11484 old_plane_state = drm_atomic_get_plane_state(state, plane); ^^^^^^^^^^^^^^^^^^^^^^^^^^ These functions can fail. 11485 --> 11486 if (old_plane_state->fb && new_plane_state->fb && 11487 get_mem_type(old_plane_state->fb) != get_mem_type(new_plane_state->fb)) 11488 return true; 11489 } 11490 11491 return false; 11492 } Fixes: 4caacd1671b7 ("drm/amd/display: Do not elevate mem_type change to full update") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd/display: mark static functions noinline_for_stackTzung-Bi Shih
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the following errors: .../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than] .../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than] Mark static functions called by dml_prefetch_check() and dml_core_mode_support() noinline_for_stack to avoid them become huge functions and thus exceed the frame size limit. A way to reproduce: $ git checkout next-20250107 $ mkdir build_dir $ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH $ make LLVM=1 O=build_dir allmodconfig $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j The way how it chose static functions to mark: [0] Unset CONFIG_WERROR in build_dir/.config. To get display_mode_core.o without errors. [1] Get a function list called by dml_prefetch_check(). $ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \ | sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms [2] Get the non-inline function list. Objdump won't show the symbols if they are inline functions. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig [3] Get the full function list. Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in drivers/gpu/drm/amd/display/dc/dml2/Makefile. $ make LLVM=1 O=build_dir drivers/gpu/drm/ -j $ objdump -d build_dir/.../display_mode_core.o | \ ./scripts/checkstack.pl x86_64 0 | \ grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline [4] Get the inline function list. If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good candidate to mark noinline. $ diff /tmp/orig /tmp/noinline Chosen functions and their stack sizes: CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144 CalculateExtraLatency [display_mode_core.o]:176 CalculateTWait [display_mode_core.o]:64 CalculateVActiveBandwithSupport [display_mode_core.o]:112 set_calculate_prefetch_schedule_params [display_mode_core.o]:48 CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544 calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320 calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272 CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208 CalculateODMMode [dml2_core_dcn4_calcs.o]:208 CalculateOutputLink [dml2_core_dcn4_calcs.o]:176 Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-24drm/amd: Add debug option to disable subvpAurabindo Pillai
Some monitors flicker when subvp is enabled which maybe related to an uncommon timing they use. To isolate such issues, add a debug option to help isolate this the issue for debugging. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-13Merge tag 'amd-drm-next-6.14-2025-01-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.14-2025-01-10: amdgpu: - Fix max surface handling in DC - clang fixes - DCN 3.5 fixes - DCN 4.0.1 fixes - DC CRC fixes - DML updates - DSC fixes - PSR fixes - DC add some divide by 0 checks - SMU13 updates - SR-IOV fixes - RAS fixes - Cleaner shader support for gfx10.3 dGPUs - fix drm buddy trim handling - SDMA engine reset updates _ Fix RB bitmap setup - Fix doorbell ttm cleanup - Add CEC notifier support - DPIA updates - MST fixes amdkfd: - Shader debugger fixes - Trap handler cleanup - Cleanup includes - Eviction fence wq fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250110172731.2960668-1-alexander.deucher@amd.com
2025-01-10drm/amd/display: 3.2.316Ryan Seto
This version brings along following fixes: - Add some feature for secure display - Add replay desync error count tracking and reset - Update chip_cap defines and usage - Remove unnecessary eDP power down - Fix some stuttering/corruption issue on PSR panel - Cleanup and refactoring DML2.1 Acked-by: Wayne Lin <wayne.lin@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: avoid reset DTBCLK at clock initCharlene Liu
[why & how] this is to init to HW real DTBCLK. and use real HW DTBCLK status to update internal logic state Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: improve dpia pre-trainPeichen Huang
[WHY] We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is because the outbox interrupt mechanism can not handle HPD immediately and require some improvement. [HOW] 1. not enable link if hpd_pending is true. 2. abort pre-train if training failed and hpd_pending is true. 3. check if 2 lane supported when it is alt mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Apply DML21 PatchesAustin Zheng
[Why & How] Add several DML21 fixes Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Use HW lock mgr for PSR1Tom Chung
[Why] Without the dmub hw lock, it may cause the lock timeout issue while do modeset on PSR1 eDP panel. [How] Allow dmub hw lock for PSR1. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Revised for Replay Pseudo vblank controlDennis Chan
[why & how] Revised Replay Full screen video Pseudo vblank control. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Dennis Chan <dennis.chan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add a new flag for replay low hzRobin Chen
[Why & How] Add a new flag in replay_config to indicate the replay low hz status. Reviewed-by: Allen Li <allen.li@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unused read_ono_state function from Hwss moduleKarthi Kandasamy
[Why] The functions read_ono_state are no longer in use and have been identified as redundant. Removing them helps streamline the codebase and improve maintainability by eliminating unnecessary code. [How] These unused functions were removed from Hwss module, ensuring that no functionality is affected, and the code is simplified. Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not elevate mem_type change to full updateLeo Li
[Why] There should not be any need to revalidate bandwidth on memory placement change, since the fb is expected to be pinned to DCN-accessable memory before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async flips + memory type change needs to be rejected. [How] Do not set lock_and_validation_needed on mem_type change. Instead, reject an async_flip request if the crtc's buffer(s) changed mem_type. This may fix stuttering/corruption experienced with PSR SU and PSR1 panels, if the compositor allocates fbs in both VRAM carveout and GTT and flips between them. Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates") Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Do not wait for PSR disable on vbl enableLeo Li
[Why] Outside of a modeset/link configuration change, we should not have to wait for the panel to exit PSR. Depending on the panel and it's state, it may take multiple frames for it to exit PSR. Therefore, waiting in all scenarios may cause perceived stuttering, especially in combination with faster vblank shutdown. [How] PSR1 disable is hooked up to the vblank enable event, and vice versa. In case of vblank enable, do not wait for panel to exit PSR, but still wait in all other cases. We also avoid a call to unnecessarily change power_opts on disable - this ends up sending another command to dmcub fw. When testing against IGT, some crc tests like kms_plane_alpha_blend and amd_hotplug were failing due to CRC timeouts. This was found to be caused by the early return before HW has fully exited PSR1. Fix this by first making sure we grab a vblank reference, then waiting for panel to exit PSR1, before programming hw for CRC generation. Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Remove unnecessary eDP power downYiling Chen
[why] When first time of link training is fail, eDP would be powered down and would not be powered up for next retry link training. It causes that all of retry link linking would be fail. [how] We has extracted both power up and down sequence from enable/disable link output function before DCN32. We remov eDP power down in dcn32_disable_link_output(). Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10Revert "drm/amd/display: Enable urgent latency adjustments for DCN35"Nicholas Susanto
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") [Why & How] Urgent latency increase caused 2.8K OLED monitor caused it to block this panel support P0. Reverting this change does not reintroduce the netflix corruption issue which it fixed. Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Add SMU interface to get UMC count for dcn401Dillon Varone
[WHY&HOW] BIOS table will not always contain accurate UMC channel info when harvesting is enabled, so get the correct info from SMU. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-10drm/amd/display: Initialize denominator defaults to 1Alex Hung
[WHAT & HOW] Variables, used as denominators and maybe not assigned to other values, should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported by Coverity. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-08 04:14:54 +0000