summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.c:1356:43: warning: unused variable 'res_create_maximus_funcs' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.c:894:38: warning: unused variable 'debug_defaults_diags' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd: Drop debugfs access to the DPCDMario Limonciello
There is already access to the DPCD from userspace through `CONFIG_DRM_DP_AUX_CHARDEV`, so it's unnecessary to reinvent the wheel with a set of extra debugfs nodes specific to amdgpu. The character device interface behaves more like you would expect in that you can seek/read/write all from the same file. Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1079:43: warning: unused variable 'res_create_maximus_funcs' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:731:38: warning: unused variable 'debug_defaults_diags' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:1222:43: warning: unused variable 'res_create_maximus_funcs' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.c:658:38: warning: unused variable 'debug_defaults_diags' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:889:43: warning: unused variable 'res_create_maximus_funcs' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer
This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: Block optimize on consecutive FAMS enables"Michel Dänzer
This reverts commit 751e17147953bc30036b8fe0eaaf780b6951404c. It depends on its parent commit, which we want to revert. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> [Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()] Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused variables res_create_maximus_funcs and ↵Tom Rix
debug_defaults_diags gcc with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:1069:43: error: ‘res_create_maximus_funcs’ defined but not used [-Werror=unused-const-variable=] 1069 | static const struct resource_create_funcs res_create_maximus_funcs = { | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:727:38: error: ‘debug_defaults_diags’ defined but not used [-Werror=unused-const-variable=] 727 | static const struct dc_debug_options debug_defaults_diags = { | ^~~~~~~~~~~~~~~~~~~~ These variables are not used so remove them. Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: avoid calling missing .resync_fifo_dccg_dio()Arnd Bergmann
The .resync_fifo_dccg_dio() callback pointer was added in an #ifdef block, but is called unconditionally: drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2292:31: error: 'struct hwseq_private_funcs' has no member named 'resync_fifo_dccg_dio' Add the same #ifdef around the caller as well. Fixes: 3e8d74cb128f ("drm/amd/display: Trigger DIO FIFO resync on commit streams") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: 3.2.237Aric Cyr
This version brings along following fixes: - Improve the message printed - Disable dcn315 pixel rate crb when scaling - Update SR watermarks for DCN314 - Fix dcn315 pixel rate crb scaling check - Reset CRTC State Before Restore from S2idle - Have Payload Properly Created After Resume - Trigger DIO FIFO resync on commit streams - Revert vblank change that causes null pointer crash - Fix possible underflow for displays with large vblank - Apply 60us prefetch for DCFCLK <= 300Mhz - Update correct DCN314 register header Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: cache trace buffer sizeJosip Pavic
[Why & How] Cache the trace buffer size retrieved from DMUB FW in the driver Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Reorganize DCN30 MakefileRodrigo Siqueira
DCN30 has a lot of files in the Makefile, and adding each one next to the other makes it hard to read and can increase the chance of merge conflicts. This commit just reorganize the Makefile to put each file associated with DCN30 in its own line. Reviewed-by: Chris Park <chris.park@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Trigger DIO FIFO resync on commit streams for DCN32Saaem Rizvi
[WHY and HOW] Currently, on DCN32 we have an old workaround to resolve a DIO FIFO speed issue when writing to the OTG DIVIDER register. However, this workaround is not safe as we should be applying the DIO FIFO rampup logic when the OTG re disabled along with the encoders. This new workaround accounts for this. If the workaround sequence is incorrect, like it is was, there is a chance we might hang. this new workaround was first implemented in DCN314. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Update correct DCN314 register headerCruise Hung
[Why] The register header for DCN314 is not correct. [How] Update correct DCN314 register header. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Apply 60us prefetch for DCFCLK <= 300MhzAlvin Lee
[Description] - Previously we wanted to apply extra 60us of prefetch for min DCFCLK (200Mhz), but DCFCLK can be calculated to be 201Mhz which underflows also without the extra prefetch - Instead, apply the the extra 60us prefetch for any DCFCLK freq <= 300Mhz Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix possible underflow for displays with large vblankDaniel Miess
[Why] Underflow observed when using a display with a large vblank region and low refresh rate [How] Simplify calculation of vblank_nom Increase value for VBlankNomDefaultUS to 800us Fixed a null pointer from previous commit of this change Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Revert vblank change that causes null pointer crashDaniel Miess
Revert commit 1a4bcdbea431 ("drm/amd/display: Fix possible underflow for displays with large vblank") Because it cause some regression Fixes: 1a4bcdbea431 ("drm/amd/display: Fix possible underflow for displays with large vblank") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Trigger DIO FIFO resync on commit streamsSaaem Rizvi
[WHY] Currently, there is an intermittent issue where a screen can either go blank or be corrupted. [HOW] To resolve the issue we trigger the ramping logic for DIO FIFO so that it goes back up to the correct speed. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Have Payload Properly Created After ResumeFangzhi Zuo
At drm suspend sequence, MST dc_sink is removed. When commit cached MST stream back in drm resume sequence, the MST stream payload is not properly created and added into the payload table. After resume, topology change is reprobed by removing existing streams first. That leads to no payload is found in the existing payload table as below error "[drm] ERROR No payload for [MST PORT:] found in mst state" 1. In encoder .atomic_check routine, remove check existance of dc_sink 2. Bypass MST by checking existence of MST root port. dc_link_type cannot differentiate MST port before topology is rediscovered. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: fix dcn315 pixel rate crb scaling checkDmytro Laktyushkin
fix dcn315 pixel rate crb scaling check error Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: lower dp link training message levelHersen Wu
[Why] some test apps report dp link training waring even dp training pass. there are 4 tries of lt within perform_link_training_with_retries. if lt pass within 4 tries, it will NOT be reated as lt failure. for each try of lt, if lt fails, current driver implementation prints message at warning level. this let people think dp lt does not work properly. [How] for 1st, 2nd and 3rd try of lt, print message at debug level. for the 4th try of lt, print message at warning level. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix warning in disabling vblank irqAlan Liu
[Why] During gpu-reset, we toggle vblank irq by calling dc_interrupt_set() instead of amdgpu_irq_get/put() because we don't want to change the irq source's refcount. However, we see the warning when vblank irq is enabled by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put() after gpu-reset. [How] Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by calling dc_interrupt_set(). Apart from this we call dm_set_vblank() which uses amdgpu_irq_get/put() to operate vblank irq. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alan Liu <haoping.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Update SR watermarks for DCN314Nicholas Kazlauskas
[Why & How] Update parameters for SR watermarks for DCN314 Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: disable dcn315 pixel rate crb when scalingDmytro Laktyushkin
The rough calculation does not account for scaling. Also, make 2 segments the minimum allowed per surface to avoid potential 0 detile with mpc/odm combine on such outputs. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix DMUB debugging print issueCruise Hung
[Why] The DMUB diagnostic data was not printed out correctly. [How] Print the DMUB diagnostic data line by line. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: improve the message printed when loading DCAurabindo Pillai
[Why&How] Change how DC version and hardware version is printed when driver is loaded. - Remove exclamation - Add DC version and hardware version to both success and failure cases - Add version in between appropriate filler words to make a complete statement. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix artifacting on eDP panels when engaging freesync video modeAurabindo Pillai
[Why] When freesync video mode is enabled, switching resolution from native mode to one of the freesync video compatible modes can trigger continous artifacts on some eDP panels when running under KDE. The articating can be seen in the attached bug report. [How] Fix this by restricting updates that require full commit by using the same checks for stream and scaling changes in the the enable pass of dm_update_crtc_state() along with the check for compatible timings for freesync vide mode. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162 Fixes: da5e14909776 ("drm/amd/display: Fix hang when skipping modeset") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: drop unused count variable in create_eml_sink()Hamza Mahfooz
Since, we are only interested in having drm_edid_override_connector_update(), update the value of connector->edid_blob_ptr. We don't care about the return value of drm_edid_override_connector_update() here. So, drop count. Fixes: 550e5d23f147 ("drm/amd/display: assign edid_blob_ptr with edid from debugfs") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: drop unused function set_abm_event()Hamza Mahfooz
set_abm_event() is never actually used. So, drop it. Fixes: b8fe56375f78 ("drm/amd/display: Refactor ABM feature") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Tom Rix <trix@redhat.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: drop redundant memset() in get_available_dsc_slices()Hamza Mahfooz
get_available_dsc_slices() returns the number of indices set, and all of the users of get_available_dsc_slices() don't cross the returned bound when iterating over available_slices[]. So, the memset() in get_available_dsc_slices() is redundant and can be dropped. Fixes: 97bda0322b8a ("drm/amd/display: Add DSC support for Navi (v2)") Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: 3.2.236Aric Cyr
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Remove v_startup workaround for dcn3+Daniel Miess
[Why] Calls to dcn20_adjust_freesync_v_startup are no longer needed as of dcn3+ and can cause underflow in some cases [How] Move calls to dcn20_adjust_freesync_v_startup up into validate_bandwidth for dcn2.x Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Remove unnecessary variableRodrigo Siqueira
There is no need to use dc_version in the dc_construct_ctx since this value is copied to dc_ctx->dce_version later. This commit removes the extra steps. Reviewed-by: Alex Hung <alex.hung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Make unbounded req update separate from dlg/ttuAlvin Lee
[Description] - Updates to unbounded requesting should not be conditional on updates to dlg / ttu, as this could prevent unbounded requesting from being updated if dlg / ttu does not change Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add visual confirm color support for MCLK switchLeo (Hanghong) Ma
[Why && How] We would like to have visual confirm color support for MCLK switch. 1. Set visual confirm color to yellow: Vblank MCLK switch. 2. Set visual confirm color to cyan: FPO + Vblank MCLK switch. 3. Set visual confirm color to pink: Vactive MCLK switch. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix possible underflow for displays with large vblankDaniel Miess
[Why] Underflow observed when using a display with a large vblank region and low refresh rate [How] Simplify calculation of vblank_nom Increase value for VBlankNomDefaultUS to 800us Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Convert connector signal id to stringRodrigo Siqueira
To improve the readability of the of the log, this commit introduces a function that converts the signal type id to a human-readable string. Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Update vactive margin and max vblank for fpo + vactiveAlvin Lee
[Description] - Some 1920x1080@60hz displays have VBLANK time > 600us which we still want to accept for FPO + Vactive configs based on testing - Increase max VBLANK time to 1000us to allow these configs for FPO + Vactive - Increase minimum vactive switch margin for FPO + Vactive to 200us - Based on testing, 1920x1080@120hz can have a switch margin of ~160us which requires significantly longer FPO stretch margin (5ms) which we don't want to accept for now - Also move margins into debug option Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Only skip update for DCFCLK, UCLK, FCLK on overclockAlvin Lee
[Description] - Update clocks is skipped in the GPU overclock sequence - However, we still need to update DISPCLK, DPPCLK, and DTBCLK because the GPU overclock sequence could temporarily disable ODM 2:1 combine because we disable all planes in the sequence Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: enable dpia validateMustapha Ghaddar
Use dpia_validate_usb4_bw() function Fixes: a8b537605e22 ("drm/amd/display: Add function pointer for validate bw usb4") Reviewed-by: Roman Li <roman.li@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Simplify the calculation of variablesJiapeng Chong
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:586:37-39: WARNING !A || A && B is equivalent to !A || B. ./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c:595:37-39: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4941 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/display: Enable DC_FP for LoongArchHuacai Chen
LoongArch now provides kernel_fpu_begin() and kernel_fpu_end() that are used like the x86 counterparts in commit 2b3bd32ea3a22ea2d ("LoongArch: Provide kernel fpu functions"), so we can enable DC_FP on LoongArch for supporting more DCN devices. Signed-off-by: WANG Xuerui <kernel@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Promote DAL to 3.2.235Aric Cyr
This version brings along following fixes: - Block SubVP on displays that have pixclk > 1800Mhz - Block SubVP high refresh when VRR active fixed - Enforce 60us prefetch for 200Mhz DCFCLK modes - Check Vactive for VRR active for FPO + Vactive - Add symclk workaround during disable link output - Show the DCN/DCE version in the log - Add additional pstate registers to HW state query Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Block SubVP on displays that have pixclk > 1800MhzAlvin Lee
[Description] - Enabling SubVP on high refresh rate displays had a side effect of also enabling on high bandwidth displays such as 8K60 - However, these are not validated and should be blocked for the time being - Block SubVP on displays that have pix rate > 1800Mhz (includes 8K60 displays) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Block SubVP high refresh when VRR active fixedAlvin Lee
[Description] - SubVP high refresh is blocked when VRR is active variable, but we should also block it for when VRR is active fixed (video use case) Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modesAlvin Lee
[Description] - Due to bandwidth / arbitration issues at 200Mhz DCFCLK, we want to enforce minimum 60us of prefetch to avoid intermittent underflow issues - Since 60us prefetch is already enforced for UCLK DPM0, and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in theory there should not be any UCLK DPM regressions by enforcing greater prefetch Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Check Vactive for VRR active for FPO + VactiveAlvin Lee
[Description] - For FPO + Vactive cases, we rely on the Vactive display to be at it's nominal refresh rate because the Vactive pipe may not necessarily assert P-State allow while it's in VBLANK - For cases where the Vactive display has a stretched VBLANK due to VRR, we could underflow when trying to complete an FPO + Vactive MCLK switch because the FPO display has limited VBLANK time in waiting for the Vactive display to assert P-State allow naturally - Block FPO + Vactive if the Vactive display has VRR active (variable or fixed) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add symclk workaround during disable link outputLeo Chen
[Why & How] This is originally a change (9c75891f) in DCN32 because of the lack of interface to set TX while keeping symclk on. Adding this workaround to DCN314 will resolve the current issue. Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Show the DCN/DCE version in the logRodrigo Siqueira
Some times people send their dmesg log for debugging, and one common task is to check the modesetting line to catch which DCN/DCE we need to debug. This commit introduces a simple conversion from the DCN/DCE version to a string shown in the dmesg log. Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 03:18:06 +0000