| Age | Commit message (Collapse) | Author |
|---|
|
[WHY]
Previously this only excluded build for a few amdgpu_dm
binaries which makes no sense.
[HOW]
Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)"
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The error path for DMUB firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_dmcub.bin failed with error -2
[drm:dm_early_init [amdgpu]] *ERROR* DMUB firmware loading failed: -19
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <dm> failed -19
```
The error code for the device init is bubbled up already, remove the
second one.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC code is reused by other OSes and so Linux return codes don't
make sense. Change dc_set_power_state() to boolean and add a wrapper
dm_set_power_state() to return a Linux error code for the memory
allocation failure.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During the suspend process dc_set_power_state() will use kzalloc
to allocate memory, but this potentially fails with memory pressure.
If it fails, the suspend should be aborted.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Harry.Wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dc->caps.color.mpc.gamut_remap says there is a post-blending color block
for gamut remap matrix for DCN3 HW family and newer versions. However,
those drivers still follow DCN10 programming that remap stream
gamut_remap_matrix to DPP (pre-blending).
To enable pre-blending and post-blending gamut_remap matrix supports at
the same time, set stream gamut_remap to MPC and plane gamut_remap to
DPP for DCN families that support both.
It was tested using IGT KMS color tests for DRM CRTC CTM property and it
preserves test results.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To disable AGP, the start needs to be set to a higher
value than the end. Set a default disable value for
the AGP aperture and allow the IP specific GMC code
to enable it selectively be calling amdgpu_gmc_agp_location().
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
After repopulating pipes for a split / merge, we want to find the
lowest vlevel that supports the desired mpc combine level.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
Change to new interface for notifying OS of cursor support changes
Reviewed-by: Gang Chu <gang.chu@amd.com>
Reviewed-by: Jaina Han <jaina.han@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hong-lu Cheng <hong-lu.cheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Allow dc report maximum display clock possible at vmin
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- Fix incorrect odm change detection logic
- Add primary pipe check when building slice table for dcn3x
- Add get primary dpp pipe resource interface
- Add missing function pointer for DCN321 resource
- Rename DisableMinDispClkODM in dc_config
- Break after finding supported vlevel for repopulate
- Update OPP counter from new interface
- Augment display clock in dc_cap structure
- Improve code style on bios_parser2
- Skip audio config for virtual signal
- Block MPO if it prevents pstate support
- Fix DP2.0 timing sync
- Improve x86 and dmub ips handshake
- Remove guaranteed viewports limitation for odm
- Add new windowed mpo odm minimal transition sequence
- Reset stream slice count for new ODM policy
- Determine fast update only before commit minimal transition state
- Remove unused mmhub_reg_offsets
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The current ODM change detection only compares first two ODM slices.
If there are 4 ODM slices and the change is within the last two slices, the
logic fails to detect ODM change and cause us to skip ODM programming
unexpectedly.
[how]
Add a is ODM topology changed resource interface to check any ODM
topology changes with a more generic method.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
There is a corner use case where the same plane pointer can be added into
dc state twice. In addition to plane state pointer check we also need to match
primary pipe before identifying the same plane.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Need to have a helper function to find the primary dp pipe of the plane
associated with a dpp pipe
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
acquire_free_pipe_as_secondary_opp_head function pointer is not
assigned. This causes ODM mode to be disabled after enabling
windowed MPO ODM capability on DCN321.
[how]
assign the correct function to the function pointer.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[what and why]
The logic for DisableMinDispClkODM is reversed now that odm is
disabled by default. Renaming to EnableMinDispClkODM.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bios_parser2 uses space instead of tabs in multiple areas; this commit
converts those spaces into tabs. It also removes some other small
details.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
edid_override and drm_edid_override_connector_update, according to drm
documentation, should not be referred outside drm_edid.
[HOW]
Remove and replace them accordingly. This can tested by IGT's
kms_hdmi_inject test.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For multi-GPU systems it is difficult to tell which GPU a particular
message is being printed for and that is undesirable because it
complicates debugging efforts. Also, the new macros allow us to enable
logging for particular parts of the codebase more selectively (since we
no longer need to throw everything at DRM_DEBUG_KMS()). So, for the
reasons outlined above we should switch to the new macros.
We can accomplish this by using the existing DC_LOGGER code to pass
around the relevant `struct drm_device` which will be fed to the new
macros in logger_types.h. Also, we must get rid of all instances of the
DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use
the DC logger there and we can simply refer to the macros directly
there instead.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
IGT's kms_hdmi_inject (subtest inject_audio) triggers a warning message
from dce_aud_az_configure. This can be fixed by checking Virtual signal
that does not need to configure AZ audio since it does not have any.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change adds a method to block mpo when it would cause us to
exit pstate support. We should block mpo by default where MPO
causes issues by preventing pstate change.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.
[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is a race condition between x86 and dmcub fw when attempting to exit
IPS2. Scenarios including exiting IPS2 before IPS2 has been entered. This
can cause unexpected hang when DMCUB attempt to exit while PMFW still
tries to enter IPS2.
[How]
A new design has been introduced to remove race conditions and improve the
handshake between x86 and DMCUB. An AON scratch register is borrowed from
PMFW to determine whether DMCUB has committed to IPS entry or not.
In the case when dmcub has committed IPS entry, x86 must poll until an exit
event occurred either from DMCUB(IPS1) or PMFW(IPS2). x86 will wait
upperbound of evaluation and IPS entry time to ensure IPS2 exit event has
been sent to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
With the more generic hw minimal state transition sequence,
this limitation has been overcome.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
We do not have a programming sequence to support seamless transition
between MPC combine to ODM combine when plane count remains the same.
This can happen with windowed MPO ODM use cases when plane scaling
is changed over ODM Combine's capability.
[How]
We are adding a programming sequence specifically to handle the transition
between MPC combine and ODM combine during plane scaling change.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
ODM combine could prevent us from supporting more planes
we will reset ODM slice count back to 1 when all planes have
been removed to maximize the amount of planes supported when
new planes are added.
[how]
reset ODM slice count when all planes are removed.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
state
[why]
commit minimal transition state would update current
state to new state with surface and stream update
applied. If we determine fast update only after we
have committed the minimal transition state based on
new state, we will skip committing the full new state.
[how]
determine fast update only earlier based on the
actaul currents state. Only skip full commit when
the transition between actual current state and new
state is fast update only.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
mmhub_reg_offsets never used in code. Remove it.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes a few style issues:
- Only calculate the dto_params and dp_hpo_inst when dccg is present.
- Fix indentation
- Drop empty else block
Fixes: 7f7925e25828 ("drm/amd/display: Fix MST recognizes connected displays as one")
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix kernel-doc warnings discovered in AMD gpu display driver.
Fixes these warnings:
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'overlap_only'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'bottom_gain_mode'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'background_color_bpc'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'top_gain'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_inside_gain'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_outside_gain'
not described in 'mpcc_blnd_cfg'.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- Use optc32 instead of optc30 in DC
- Optimize OLED T7 delay
- Multiple fixes for MST, register mas, and others
- Update driver and IPS interop
- Improve z8 watermark mask
- DCN35 updates
- Enable replay for DCN35
- Temporarily disable clock gating
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are multiple parts of the code that DC does not use anymore, and
this commit drops those dead codes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable DCN low mem power by default.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update with extended blank Vstartup adjustment for replay.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change DC to use optc32, which uses REG_UPDATE instead of REG_SET.
REG_SET clears OTG_H_TIMING_DIV_MODE_MANUAL which must be set to 1 in
some specific HDMI configurations.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Driver doesn't need T7 delay for OLED panels, since it doesn't control
power sequence.
[How]
This delay can be skipped to optimize resume times.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
|
|
On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b876
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693
Fixes: cb841d27b876 ("drm/amd/display: Always pass connector_state to stream validation")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[What]
MST now recognizes both connected displays
Fixes: 927e784c180c ("drm/amd/display: Add symclk enable/disable during stream enable/disable")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Add new IPS ALLOW masks
- Add new Replay power configuration options
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MST now recognizes both connected displays
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix some non-initialized register mask and update golden setting.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the display replay feature for DCN35.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a config option to disable odm dispclk optimization for debug
purpose.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Disable IPS by default till it is ready.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Currently, driver is not aware if IPS is supported. After PMFW helps
implement new message query functionality, driver will set IPS
capability flag.
[how]
Create new SMU hook function to query IPS capability. Based on the cap,
set appropriate flags to false for power-gating purposes. This will
avoid keeping SMU busy and offloading tasks to DMUB/driver.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Two issues fixed:
1. Currently, driver does not allow idle prior to PSR entry. Once
PSR1+IPS is enabled, there is intermittent hang due to DCN access
from IrqMgr during IPS2.
2. Driver is sending multiple commands to PMFW and dmcub to exit IPS
even during IPS0.
[How]
1. Set driver allow optimization prior to entering PSR mode with the
condition for eDP display only. Unregister all interrupts before
allowing driver idle and re-register interrupts when exiting from
idle. This will prevent IrqMgr to access DCN during IPS2.
2. Block sending PMFW and dmcub exit low power state commands when
driver is not in idle state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct z8_watermark mask from 16bit to 20bit. Also, do not set dcn35
dprefclk in clk_mgr_construct.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The STREAM_MAPPER_CONTROL register offset was left uninitialized,
causing warning in the driver log at runtime
[How]
A temporary solution to add it into dcn35_create_resource_pool.
[TODO]
Remove duplication between SE_DCN35_REG_LIST_RI in dcn35_resource.h and
SE_DCN35_REG_LIST in dcn35_dio_stream_encoder.h
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pipe resource interfaces were changed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
