summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2021-10-06drm/amd/display: Fix detection of 4 lane for DPALTHansen
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Limit display scaling to up to 4k for DCN 3.1Nikola Cornij
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Skip override for preferred link settings during link trainingGeorge Shen
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amd/display: USB4 bring up set correct addressJude Shih
[Why] YELLOW_CARP_B0 address was not correct [How] Set YELLOW_CARP_B0 to 0x1A. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Jude Shih <shenshih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-05drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b)
2021-10-05drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70)
2021-09-28drm/amd/display: Pass PCI deviceid into DCCharlene Liu
[why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-28drm/amd/display: initialize backlight_ramping_override to falseJosip Pavic
[Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-28drm/amd/display: Fix Display Flicker on embedded panelsPraful Swarnakar
[Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu/display: add a proper license to dc_link_dp.cAlex Deucher
Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix white screen page fault for gpuvmNicholas Kazlauskas
[Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-16amd/display: enable panel orientation quirksSimon Ser
This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Link training retry fix for abort caseMeenakshikumar Somasundaram
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Fix unstable HPCP compliance on Chrome BarceloQingqing Zhuo
[Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3Hersen Wu
[Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by: Scott Foster <Scott.Foster@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: dc_assert_fp_enabled assert only if FPU is not enabledAnson Jacob
Assert only when FPU is not enabled. Fixes: 0ea7ee821701 ("drm/amd/display: Add DC_FP helper to check FPU state") Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Add NULL checks for vblank workqueueNicholas Kazlauskas
[Why] If we're running a headless config with 0 links then the vblank workqueue will be NULL - causing a NULL pointer exception during any commit. [How] Guard access to the workqueue if it's NULL and don't queue or flush work if it is. Reported-by: Mike Lothian <mike@fireburn.co.uk> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700 Fixes: 58aa1c50e5a231 ("drm/amd/display: Use vblank control events for PSR enable/disable") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14amd/display: downgrade validation failure log levelSimon Ser
In amdgpu_dm_atomic_check, dc_validate_global_state is called. On failure this logs a warning to the kernel journal. However warnings shouldn't be used for atomic test-only commit failures: user-space might be perfoming a lot of atomic test-only commits to find the best hardware configuration. Downgrade the log to a regular DRM atomic message. While at it, use the new device-aware logging infrastructure. This fixes error messages in the kernel when running gamescope [1]. [1]: https://github.com/Plagman/gamescope/issues/245 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-10Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Just an initial bunch of fixes for the merge window, amdgpu is most of them with a few ttm fixes and an fbdev avoid multiply overflow fix. core: - Make some dma-buf config options depend on DMA_SHARED_BUFFER - Handle multiplication overflow of fbdev xres/yres in the core ttm: - Fix ttm_bo_move_memcpy() when ttm_resource is subclassed - Fix ttm deadlock if target BO isn't idle - ttm build fix - ttm docs fix dma-buf: - config option fixes fbdev: - limit resolutions to avoid int overflow i915: - stddef change. amdgpu: - Misc cleanups, typo fixes - EEPROM fix - Add some new PCI IDs - Scatter/Gather display support for Yellow Carp - PCIe DPM fix for RKL platforms - RAS fix amdkfd: - SVM fix vc4: - static function fix mgag200: - fix uninit var panfrost: - lock_region fixes" * tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits) drm/ttm: Fix a deadlock if the target BO is not idle during swap fbmem: don't allow too huge resolutions dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers" dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER drm/amdkfd: drop process ref count when xnack disable drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode drm/amdgpu: fix fdinfo race with process exit drm/amdgpu: Fix a deadlock if previous GEM object allocation fails drm/amdgpu: stop scheduler when calling hw_fini (v2) drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amd/display: Initialize lt_settings on instantiation drm/amd/display: cleanup idents after a revert drm/amd/display: Fix memory leak reported by coverity drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum" drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform drm/amdgpu: show both cmd id and name when psp cmd failed drm/amd/display: setup system context for APUs ...
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-08-31drm/amd/display: Initialize lt_settings on instantiationMichael Strauss
[WHY] lt_settings' pointers remain uninitialized but nonzero if display fails to light up with no DPCD/EDID info populated, leading to a hang on access Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: cleanup idents after a revertAngus Wang
[WHY] The change has caused high idle memory clock speed and power consumption at some resolutions and frame rates for Navi10 [HOW] Reverted change "drm/amd/display: Fixed Intermittent blue screen on OLED panel" Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: Fix memory leak reported by coverityAnson Jacob
Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm/amd/display: setup system context for APUsAaron Liu
Scatter/gather is APU feature starting from carrizo. adev->apu_flags is not used for all APUs. adev->flags & AMD_IS_APU can be used for all APUs. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-30drm:dcn31: fix boolreturn.cocci warningsJing Yangyang
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_backlight_on' with return type bool ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_powered_on' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to ↵Nicholas Kazlauskas
bounding box [Why] This is a global parameter, not a per pipe parameter and it's useful for experimenting with the prefetch schedule to be adjustable from the SOC bb. [How] Add a parameter to the SOC bb, default is the existing policy for all DCN. Fill it in when filling SOC bb parameters. Revert the policy to use MinDCFClk at the same time since that's not going to give us P-State in most cases on the spreadsheet. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Remove duplicate dml initAurabindo Pillai
[Why & How] DML is initialized again unnecessarily after its done conditionally. Remove the duplicate initialization Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update bounding box states (v2)Jerry (Fangzhi) Zuo
[Why] Drop hardcoded dispclk, dppclk, phyclk [How] Read the corresponding values from clock table entries already populated. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update number of DCN3 clock statesAurabindo Pillai
[Why & How] The DCN3 SoC parameter num_states was calculated but not saved into the object. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: Add Logging for HDMI color depth informationPraful Swarnakar
[Why] Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color status helps in validation of testcase. [How] Add logging based on various color depths and pixel encoding formats. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Hersen Wu <hersenwu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: refactor riommu invalidation waEric Yang
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-19isystem: ship and use stdarg.hAlexey Dobriyan
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>. stdarg.h is the only userspace header commonly used in the kernel. GPL 2 version of <stdarg.h> can be extracted from http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-19isystem: trim/fixup stdarg.h and other headersAlexey Dobriyan
Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition of uintptr_t error (one definition comes from <stddef.h>, another from <linux/types.h>). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-18drm/amd: consolidate TA shared memory structuresCandice Li
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-18drm/amd/display: Use DCN30 watermark calc for DCN301Zhan Liu
[why] dcn301_calculate_wm_and_dl() causes flickering when external monitor is connected. This issue has been fixed before by commit 0e4c0ae59d7e ("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however part of the fix was gone after commit 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next"). [how] Use dcn30_calculate_wm_and_dlg() instead as in the original fix. Fixes: 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Oliver Logush <oliver.logush@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: 3.2.149Aric Cyr
This version brings along following fixes: - Ensure DCN save init registers after VM setup - Fix multi-display support for idle opt workqueue - Use vblank control events for PSR enable/disable - Create default dc_sink when fail reading EDID under MST Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: [FW Promotion] Release 0.0.79Anthony Koo
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Guard vblank wq flush with DCN guardsNicholas Kazlauskas
[Why] Compilation of the workqueue fails if not building with the DCN config option set. [How] Guard calls to the flush with the DCN config option to fix the build. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Ensure DCN save after VM setupJake Wang
[Why] DM initializes VM context after DMCUB initialization. This results in loss of DCN_VM_CONTEXT registers after z10. [How] Notify DMCUB when VM setup is complete, and have DMCUB save init registers. v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Use vblank control events for PSR enable/disableNicholas Kazlauskas
[Why] PSR can disable the HUBP along with the OTG when PSR is active. We'll hit a pageflip timeout when the OTG is disable because we're no longer updating the CRTC vblank counter and the pflip high IRQ will not fire on the flip. In order to flip the page flip timeout occur we should modify the enter/exit conditions to match DRM requirements. [How] Use our deferred handlers for DRM vblank control to notify DMCU(B) when it can enable or disable PSR based on whether vblank is disabled or enabled respectively. We'll need to pass along the stream with the notification now because we want to access the CRTC state while the CRTC is locked to get the stream state prior to the commit. Retain a reference to the stream so it remains safe to continue to access and release that reference once we're done with it. Enable/disable logic follows what we were previously doing in update_planes. The workqueue has to be flushed before programming streams or planes to ensure that we exit out of idle optimizations and PSR before these events occur if necessary. To keep the skip count logic the same to avoid FBCON PSR enablement requires copying the allow condition onto the DM IRQ parameters - a field that we can actually access from the worker. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Fix multi-display support for idle opt workqueueNicholas Kazlauskas
[Why] The current implementation for idle optimization support only has a single work item that gets reshuffled into the system workqueue whenever we receive an enable or disable event. We can have mismatched events if the work hasn't been processed or if we're getting control events from multiple displays at once. This fixes this issue and also makes the implementation usable for PSR control - which will be addressed in another patch. [How] We need to be able to flush remaining work out on demand for driver stop and psr disable so create a driver specific workqueue instead of using the system one. The workqueue will be single threaded to guarantee the ordering of enable/disable events. Refactor the queue to allocate the control work and deallocate it after processing it. Pass the acrtc directly to make it easier to handle psr enable/disable in a later patch. Rename things to indicate that it's not just MALL specific. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Create dc_sink when EDID failWayne Lin
[Why] While reading remote EDID via Startech 1-to-4 hub, occasionally we won't get response in time and won't light up corresponding monitor. Ideally, we can still add generic modes for userspace to choose to try to light up the monitor and which is done in drm_helper_probe_single_connector_modes(). So the main problem here is that we fail .mode_valid since we don't create remote dc_sink for this case. [How] Also add default dc_sink if we can't get the EDID. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-11drm/display: fix possible null-pointer dereference in dcn10_set_clock()Tuo Li
The variable dc->clk_mgr is checked in: if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock) This indicates dc->clk_mgr can be NULL. However, it is dereferenced in: if (!dc->clk_mgr->funcs->get_clock) To fix this null-pointer dereference, check dc->clk_mgr and the function pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them is NULL. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: use do-while-0 for DC_TRACE_LEVEL_MESSAGE()Randy Dunlap
Building with W=1 complains about an empty 'else' statement, so use the usual do-nothing-while-0 loop to quieten this warning. ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 113 | *state, retry_count); Fixes: b30eda8d416c ("drm/amd/display: Add ETW log to dmub_psr_get_state") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wyatt Wood <wyatt.wood@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: use GFP_ATOMIC in amdgpu_dm_irq_schedule_workAnson Jacob
Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work can't sleep. BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8 Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 Workqueue: events_highpri dm_irq_work_func [amdgpu] Call Trace: <IRQ> dump_stack+0x5e/0x74 ___might_sleep.cold+0x87/0x98 __might_sleep+0x4b/0x80 kmem_cache_alloc_trace+0x390/0x4f0 amdgpu_dm_irq_handler+0x171/0x230 [amdgpu] amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu] amdgpu_ih_process+0x81/0x100 [amdgpu] amdgpu_irq_handler+0x26/0xa0 [amdgpu] __handle_irq_event_percpu+0x49/0x190 ? __hrtimer_get_next_event+0x4d/0x80 handle_irq_event_percpu+0x33/0x80 handle_irq_event+0x33/0x60 handle_edge_irq+0x82/0x190 asm_call_irq_on_stack+0x12/0x20 </IRQ> common_interrupt+0xbb/0x140 asm_common_interrupt+0x1e/0x40 RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu] Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3 RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286 RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000 RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430 R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430 ? amdgpu_cgs_write_register+0x20/0x20 [amdgpu] amdgpu_device_rreg+0x17/0x20 [amdgpu] amdgpu_cgs_read_register+0x14/0x20 [amdgpu] dm_read_reg_func+0x38/0xb0 [amdgpu] generic_reg_wait+0x80/0x160 [amdgpu] dce_aux_transfer_raw+0x324/0x7c0 [amdgpu] dc_link_aux_transfer_raw+0x43/0x50 [amdgpu] dm_dp_aux_transfer+0x87/0x110 [amdgpu] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper] drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] ? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] ? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] handle_hpd_rx_irq+0x195/0x240 [amdgpu] ? __switch_to_asm+0x42/0x70 ? __switch_to+0x131/0x450 dm_irq_work_func+0x19/0x20 [amdgpu] process_one_work+0x209/0x400 worker_thread+0x4d/0x3e0 ? cancel_delayed_work+0xa0/0xa0 kthread+0x124/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Increase timeout threshold for DMCUB resetNicholas Kazlauskas
[Why] If we're backdoor loading the DMCUB performs more work than just the PHY reset so we can end up resetting before the cleanup has fully finished. [How] Increase timeout, add udelay between spins to guarantee a minimum. Reviewed-by: Roy Chan <roy.chan@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Clear GPINT after DMCUB has resetNicholas Kazlauskas
[Why] Otherwise we can end up processing whatever was left in the register if the DMCUB was previously reset. If DMCUB gets force reset too early from another client then we might not have even acked the disable yet - causing DMCUB instantly shutdown if the command was 10020000. [How] Move the GPINT clear outside of the reset loop and do it unconditionally after the DMCUB has been properly reset. Reviewed-by: Roy Chan <roy.chan@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 20:16:14 +0000