summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)Author
2021-08-09drm/amd/display: 3.2.148Anthony Koo
This version brings along following fixes: - Fix memory allocation in dm IRQ context to use GFP_ATOMIC - Increase timeout threshold for DMCUB reset - Clear GPINT after DMCUB has reset - Add AUX I2C tracing - Fix code commenting style - Some refactoring - Remove invalid assert for ODM + MPC case Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: [FW Promotion] Release 0.0.78Anthony Koo
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: add authentication_complete in hdcp outputWenjing Liu
[why] DM needs to be notified when hdcp module has completed authentication attempt. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Add AUX I2C tracing.Ashley Thomas
[Why] Developers can find it useful if the driver can produce AUX traces without special equipment. [How] Add AUX tracing. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Correct comment styleRoy Chan
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: fix incorrect CM/TF programming sequence in dwbRoy Chan
[How] the programming sequeune was for old asic. the correct programming sequeunce should be similar to the one used in mpc. the fix is copied from the mpc programming sequeunce. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: refactor the cursor programing codesRoy Chan
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: refactor the codes to centralize the stream/pipe checking logicRoy Chan
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: fix missing writeback disablement if plane is removedRoy Chan
[Why] If the plane has been removed, the writeback disablement logic doesn't run [How] fix the logic order Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Remove invalid assert for ODM + MPC caseEric Bernstein
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Remove redundant initialization of variable eng_idColin Ian King
The variable eng_id is being initialized with a value that is never read, it is being re-assigned on the next statment. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.Solomon Chiu
[Why] With kernel module parameter "freesync_video" is enabled, if the mode is changed to preferred mode(the mode with highest rate), then Freesync fails because the preferred mode is treated as one of freesync video mode, and then be configurated as freesync video mode(fixed refresh rate). [How] Skip freesync fixed rate configurating when modeset to preferred mode. Signed-off-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu/display: fix DMUB firmware version infoShirish S
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: 3.2.147Aric Cyr
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: [FW Promotion] Release 0.0.77Anthony Koo
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Add DC_FP helper to check FPU stateRodrigo Siqueira
To fully isolate FPU operations in a single place, we must avoid situations where compilers spill FP values to registers due to FP enable in a specific C file. Note that even if we isolate all FPU functions in a single file and call its interface from other files, the compiler might enable the use of FPU before we call DC_FP_START. Nevertheless, it is the programmer's responsibility to invoke DC_FP_START/END in the correct place. To highlight situations where developers forgot to use the FP protection before calling the DC FPU interface functions, we introduce a helper that checks if the function is invoked under FP protection. If not, it will trigger a kernel warning. Changes cince V3: - Rebase Changes cince V2 (Christian): - Do not use this_cpu_* between get/put_cpu_ptr(). - In the kernel documentation, better describe restrictions. - Make dc_assert_fp_enabled trigger the ASSERT message. Changes since V1: - Remove fp_enable variables - Rename dc_is_fp_enabled to dc_assert_fp_enabled - Replace wrong variable type Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Add control mechanism for FPU utilizationRodrigo Siqueira
DC invokes DC_FPU_START/END in multiple parts of the code; this can create a situation where we invoke this FPU operation in a nested way or exit too early. For avoiding this situation, this commit adds a mechanism where dc_fpu_begin/end manages the access to kernel_fpu_begin/end. Change since V3: - Rebase Change since V2: - Christian: Do not use this_cpu_* between get/put_cpu_ptr(). Change since V1: - Use a better variable names - Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable and disable Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Add control mechanism for FPURodrigo Siqueira
DC invokes DC_FPU_START/END in multiple parts of the code; this can create a situation where we invoke this FPU operation in a nested way or exit too early. For avoiding this situation, this commit adds a mechanism where dc_fpu_begin/end manages the access to kernel_fpu_begin/end. Change since V3: - Christian: Move PPC64 code to dc_fpu_begin/end. Change since V2: - Christian: Do not use this_cpu_* between get/put_cpu_ptr(). Change since V1: - Use a better variable names - Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable and disable Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Move specific DCN2x code that uses FPU to DMLRodrigo Siqueira
The display core files rely on FPU, which requires to be compiled with special flags. Ideally, we don't want these FPU operations spread around the DC code; nevertheless, it happens in the current source. This commit introduces a new directory inside DML for centralizing shared DCN functions that require FPU and have been used outside DML. For illustrating this process of transferring FPU functions to the DML folder, this commit moves one of the functions dcn20_populate_dml_writeback_from_context) that require FPU access to a single shared file. Notice that this is the first part of the work, and it does not fix the FPU issue yet; we still need other patches for achieving the complete FPU isolation. Changes since V3: - Jun: Instead of creating a new directory to keep the FPU code, let's make the DML folder the only part that requires FPU access. Drop fpu_operation folder. - Christian: Fix function code style. Changes since V2: - Christian: Remove unnecessary wrapper. - lkp: Add missing prototype. - Only compile the FPU operations if the DCN option is enabled. Change since V1: - Update documentation and rebase. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Add check for validating unsupported ODM plus MPO caseJaehyun Chung
[Why] We do not currently support ODM plus MPO on only one side of the screen. This unsupported case causes validation calculations to divide by zero due to invalid viewport values. [How] Add stopgap for the validation of ODM plus MPO on one side of screen case. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jaehyun Chung <jaehyum.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4Jude Shih
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jude Shih <jude.shih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Remove redundant vblank workqueues in DMRoman Li
[Why] Display Manager initializes array of vblank workqueues, but only 1 is used. [How] Use single instance init instead of array. Reviewed-by: Qingqing Zhou <Qingqing.Zhuo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Increase stutter watermark for dcn303Bing Guo
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amdgpu/display: fix DMUB firmware version infoShirish S
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-08-05drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4Jude Shih
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jude Shih <jude.shih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Increase stutter watermark for dcn303Bing Guo
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-02drm/amd/display: Fix typo in commentsCai Huoqing
Remove the repeated word 'the' from comments Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
2021-07-28drm/amdgpu/display: add support for multiple backlightsAlex Deucher
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: 3.2.146Aric Cyr
This version brings along following fixed: - Guard DST_Y_PREFETCH register overflow in DCN21 - Add missing DCN21 IP parameter - Fix PSR command version - Add ETW logging for AUX failures - Add ETW log to dmub_psr_get_state - Fixed EdidUtility build errors - Fix missing reg offset for the dmcub test debug registers - Adding update authentication interface - Remove unused functions of opm state query support - Always wait for update lock status - Refactor riommu invalidation wa - Ensure dentist display clock update finished in DCN20 Reviewed-by: Hsieh Mike <Mike.Hsieh@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: [FW Promotion] Release 0.0.76Anthony Koo
Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: refactor riommu invalidation waEric Yang
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: Always wait for update lock statusEric Bernstein
Remove code that would skip wait for lock status for Diags FPGA case Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: remove unused functionsWenjing Liu
[why] It has been decided that opm state query support will be dropped. Therefore link encryption enabled and save current encryption states won't be used anymore and there are no foreseeable usages in the future. We will remove these two interfaces for clean up. Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: add update authentication interfaceWenjing Liu
[why] Previously to toggle authentication, we need to remove and add the same display back with modified adjustment. This method will toggle DTM state without actual hardware changes. This is not per design and would cause potential issues in the long run. [how] We are creating a dedicated interface that does the same thing as remove and add back the display without changing DTM state. Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: fix missing reg offsetEric Yang
[Why] Initializing was missing reg offsets for the dmcub test debug registers causing assert [How] Add initialization Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: Fixed EdidUtility build errorsMark Morra
[HOW] Added #ifdefs and refactored various parts of dc to allow dc_link to be built by AMD EDID UTILITY [WHY] dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed to dc_link, so now dc_link needs to be included by AMD EDID UTILITY Squash in DCN config fix (Alex) Reviewed-by: Leung Martin <Martin.Leung@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Mark Morra <MarkAlbert.Morra@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21Victor Lu
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW log to dmub_psr_get_stateWyatt Wood
[Why] GPINT commands have the lowest priority in DMCUB, so it's possible that the command isn't processed in time. [How] Add a log to help identify this case. Reviewed-by: Koo Anthony <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 10:15:31 +0000