summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/modules/power
AgeCommit message (Collapse)Author
2019-10-03drm/amd/display: set minimum abm backlight levelAnthony Koo
[Why] A lot of the time, the backlight characteristic curve maps min backlight to a non-zero value. But there are cases where we want the curve to intersect at 0. In this scenario even if OS never asks to set 0% backlight, the ABM reduction can result in backlight being lowered close to 0. This particularly can cause problems in some LED drivers, and in general just looks like backlight is completely off. [How] Add default cap to disallow backlight from dropping below 1% even after ABM reduction is applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: define parameters for abm 2.3Josip Pavic
[Why] Current configuration 0 is just a placeholder, and final parameters needed. Also, configuration 1 is expected to emulate ABM 2.1 but is too aggressive. [How] Redefine configuration 0 with the finalized parameters, and increase the contrast gain of configuration 1 so that it properly emulates ABM 2.1. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: load iram for abm 2.3Josip Pavic
[Why] ABM 2.3 firmware expects information in iRAM that differs from previous versions of ABM, so a mechanism is required to provide it with that information. [How] Extend the existing iRAM definition to include parameters added by ABM 2.3, and load it if DMCU is running ABM 2.3. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-17drm/amd/display: Add missing newline at end of fileGeert Uytterhoeven
"git diff" says: \ No newline at end of file after modifying the file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-04-10drm/amd/display: remove min reduction for abm 2.2 level 3Josip Pavic
[Why] Image brightness compensation for solid color full screen images is expected to be optimal for ABM 2.2 at level 3. The min reduction that is currently being enforced prevents this from being achieved. [How] Remove the min reduction for ABM 2.2 at level 3 Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-03-19drm/amd/display: reduce abm min reduction, deviation gain and contrast factorJosip Pavic
[Why] Increased power savings are desired for ABM 2.2. [How] Reduce the minimum reduction level, the deviation gain and the contrast factor to allow for more aggressive operation of the algorithm. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: Increase precision for backlight curveAnthony Koo
[Why] We are currently losing precision when we convert from 16 bit --> 8 bit --> 16 bit. [How] We shouldn't down convert unnecessarily and lose precision. Keep values at 16 bit and use directly. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-05drm/amd/display: Modify ABM 2.2 Max ReductionJosip Pavic
[Why] Reduced backlight for ABM 2.2 at levels 1 and 2 is desired for power savings. [How] Reduce the max reduction parameters for ABM 2.2 Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-05drm/amd/display: fix issue with DC brightness low with VBAnthony Koo
[Why] The problem is that we accidentally stopped loading some of the IRAM bytes used for the backlight ramping mechanism. This happened when we started reserving some region of IRAM as DMCU FW write only. [How] This change will define a start+end region for the IRAM read only region. So the parameters needed for the backlight operation will be loaded since it will be defined outside of the read only region. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-25drm/amd/display: Adjust ABM 2.2 contrast parametersJosip Pavic
[Why] Improved contrast in ABM 2.2 is desired [How] Increase the contrast factor for ABM levels 2, 3 and 4 Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-25drm/amd/display: Create switching mechanism for ABM 2.2Josip Pavic
[Why] Need method of detecting which version of the DMCU FW is loaded and load the appropriate iRAM. [How] Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-25drm/amd/display: Update DMCU versioning mechanismJosip Pavic
[Why] Current date based versioning doesn't tell us about feature version and build version, and is not useful for debug. [How] Add versioning based on feature and build Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Redefine DMCU_SCRATCH to identify DMCU stateMartin Tsai
[why] To resume system before entering S0i3 completely will cause PSP not reload DMCU FW since there is not HW power state change. In this case, driver cannot get correct DMCU version from IRAM since driver override it and DMCU didn't reload to update it. It makes driver return false in dcn10_dmcu_init(). [how] 1.To redefine DMCU_SCRATCH to identify different DMCU state. 2.To reserve IRAM 0xF0~0xFF write by DMCU only. 3.To remove dcn10_get_dmcu_state Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: Pack DMCU iRAM alignmentJosip Pavic
[Why] When the DMCU's iRAM definition was moved to the newly created power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned [How] Restore the #pragma pack Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-26drm/amd/display: Load DMCU IRAMDavid Francis
DMCU IRAM must be loaded by the driver before DMCU can function. Move the IRAM code out of the shadows and into a new file modules/power/power_helpers.c The IRAM table contains the backlight curve and ABM parameters Add this new file to the Makefiles Call dmcu_load_iram in late init of DM Move struct dmcu_version from dc.h to dmcu.h to allow dmcu to be included on its own Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 01:53:11 +0000