summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)Author
2021-05-19drm/amd/display: Disconnect non-DP with no EDIDChris Park
[Why] Active DP dongles return no EDID when dongle is connected, but VGA display is taken out. Current driver behavior does not remove the active display when this happens, and this is a gap between dongle DTP and dongle behavior. [How] For active DP dongles and non-DP scenario, disconnect sink on detection when no EDID is read due to timeout. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Use the correct max downscaling value for DCN3.x familyNikola Cornij
[why] As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The max downscaling limit value for DCN2.x is 250, which means it's calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167. [how] Set maximum downscaling limit to 167 for DCN3.x Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-20drm/amd/display: 3.2.132Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: add helper for enabling mst stream featuresBing Guo
[Why] Some MST devices uses different method to enable mst specific stream features. [How] Add dm_helpers_mst_enable_stream features. This can be modified later when we are ready to implement those features. Signed-off-by: Bing Guo <bing.guo@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Report Proper Quantization Range in AVI InfoframeDillon Varone
[Why?] When a monitor does not set both QS and QY bits, DC does not set Q0, Q1, QY0 and QY1 bits in AVI infoframe. Setting RGB bits should be separate from setting YCC bits. [How?] Separate logic for setting RGB and YCC quantization range bits in the AVI infoframe. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Fixed typo in function name.David Galiffi
[How & Why] Changed "prsent" to "present". Signed-off-by: David Galiffi <David.Galiffi@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Add link rate optimization logs for ILRMichael Strauss
[Why&How] Add logs to verify ILR optimization behaviour on boot Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Unconditionally clear training pattern set after ltWesley Chalmers
[WHY] While Link Training is being performed, and the LTTPRs are in Non-LTTPR or LTTPR Transparent mode, any DPCD registers besides those used for Link Training are not to be accessed. The spec defines the link training registers as DP_TRAINING_PATTERN_SET (102h) to DP_TRAINING_LANE3_SET (106h), and DP_LANE0_1_STATUS (202h) to DP_ADJUST_REQUEST_LANE2_3 (207h). [HOW] Move the current write to DPCD Address DP_LINK_TRAINING_PATTERN_SET out of its conditional block. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Fix FreeSync when RGB MPO in useAric Cyr
[WHY] We should skip programming manual trigger on non-primary planes when MPO is enabled. [HOW] Implement an explicit mechanism for skipping manual trigger programming for planes that shouldn't cause the frame to end. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: treat memory as a single-channel for asymmetric memory v2Hugo Hu
Previous change had been reverted since it caused hang. Remake change to avoid defect. [Why] 1. Driver use umachannelnumber to calculate watermarks for stutter. In asymmetric memory config, the actual bandwidth is less than dual-channel. The bandwidth should be the same as single-channel. 2. We found single rank dimm need additional delay time for stutter. [How] Get information from each DIMM. Treat memory config as a single-channel for asymmetric memory in bandwidth calculating. Add additional delay time for single rank dimm. Fixes: b8720ed0b87d32 ("drm/amd/display: System black screen hangs on driver load") Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: removed unused function dc_link_reallocate_mst_payload.Robin Singh
[Why] Found that dc_link_reallocate_mst_payload is not used anymore in any of the use case scenario. [How] removed dc_link_reallocate_mst_payload function definition and declaration. Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: disable seamless boot for external DPAnthony Wang
[Why] Primary feature use case is with eDP panels. [How] Fail seamless boot validation if display is not an eDP panel. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: Add DSC check to seamless boot validationAnthony Wang
[Why & How] We want to immediately fail seamless boot validation if DSC is active, as VBIOS currently does not support DSC timings. Add a check for the relevant flag in dc_validate_seamless_boot_timing. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-20drm/amd/display: fixed divide by zero kernel crash during dsc enablementRobin Singh
[why] During dsc enable, a divide by zero condition triggered the kernel crash. [how] An IGT test, which enable the DSC, was crashing at the time of restore the default dsc status, becaue of h_totals value becoming 0. So add a check before divide condition. If h_total is zero, gracefully ignore and set the default value. kernel panic log: [ 128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI [ 128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G W 5.4.19-android-x86_64 #1 [ 128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020 [ 128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu] [ 128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ...... [ 128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246 ...... [ 128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0 [ 128.865695] Call Trace: [ 128.869712] hubp3_setup+0x1f/0x7f [amdgpu] [ 128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu] [ 128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu] [ 128.885706] dc_commit_state+0x3d2/0x658 [amdgpu] [ 128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu] [ 128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu] [ 128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu] [ 128.905706] ? __is_insn_slot_addr+0x43/0x48 [ 128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu] [ 128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu] [ 128.921700] ? usleep_range+0x7c/0x7c [ 128.925705] ? preempt_count_sub+0xf/0x18 [ 128.929706] ? _raw_spin_unlock_irq+0x13/0x24 [ 128.933732] ? __wait_for_common+0x11e/0x18f [ 128.937705] ? _raw_spin_unlock_irq+0x13/0x24 [ 128.941706] ? __wait_for_common+0x11e/0x18f [ 128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper] [ 128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper] [ 128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu] [ 128.961705] ? drm_atomic_check_only+0x543/0x68d [drm] [ 128.969705] ? drm_atomic_set_property+0x760/0x7af [drm] [ 128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm] [ 128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm] [ 128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm] [ 128.989706] drm_ioctl_kernel+0x82/0xda [drm] [ 128.993706] drm_ioctl+0x225/0x319 [drm] [ 128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm] [ 129.001706] ? preempt_count_sub+0xf/0x18 [ 129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu] [ 129.009705] vfs_ioctl+0x1d/0x2a [ 129.013705] do_vfs_ioctl+0x419/0x43d [ 129.017707] ksys_ioctl+0x52/0x71 [ 129.021707] __x64_sys_ioctl+0x16/0x19 [ 129.025706] do_syscall_64+0x78/0x85 [ 129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Robin Singh <Robin.Singh@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: 3.2.131Aric Cyr
DC version 3.2.131 brings improvements in multiple areas. In summary, we highlight: -Enhancement for multiple eDP BL control. -Add debug flag to enable eDP ILR by default and debugfs to repress HPD/HPR_RX IRQ. -Fixes for DSC enable sequence,Force vsync flip,hang when psr is enabled etc. -Firmware releases: 0.0.60 0.0.61 Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix hangs with psr enabled on dcn3.xxRoman Li
[Why] SKIP_CRTC_DISABLE bit should be applicable to all dcn asics not only Raven. [How] Replace check for Raven only with check for all DCNs. Signed-off-by: Roman Li <Roman.Li@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Added support for multiple eDP BL controlJake Wang
[WHY & HOW] Driver currently assumes only 1 eDP is connected. Added support for multiple eDP BL control. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: wait vblank when stream enabled and update dpp clockLewis Huang
[Why] When boot into OS, seamless boot device won't blank stream. Driver update dpp clock when scanline position in vactive will show garbage on screen. [How] Wait for vblank for seamless boot edp display when driver update dpp clock. The apply seamless boot flag will be clear when OS call SetVisibility on. Therefore we only wait for vblank once after boot into OS. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Connect clock optimization function to dcn301Mikita Lipski
[why/how] Connecting clock optimization functions to dcn301 HWSS to enable power state enter/exit optimization Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Remove unused flag from stream stateMikita Lipski
[why & how] Removing unused DSC flag which is incorrect and is not used. We are only using stream->timing.flags.DSC for DSC's current state. Stream state as an input parameter and should not contain any past status flags. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Force vsync flip when reconfiguring MPCCAnthony Wang
[Why] Underflow observed when disabling PIP overlay in-game when vsync is disabled, due to OTC master lock not working with game pipe which is immediate flip. [How] When performing a full update, override flip_immediate value to false for all planes, so that flip occurs on vsync. Signed-off-by: Anthony Wang <anthony1.wang@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Set LTTPR mode to non-LTTPR if no repeaters foundWesley Chalmers
[WHY] If no repeaters are found, we do not need or want to attempt to link-train repeaters, as this could cause bugs. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix DML validation of simple vs native 422 modesNicholas Kazlauskas
[Why] We're always validating DML with simple 422 DSC even if native 422 DSC is in use. [How] Use the mode configuration from the timing. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Remove static property from decide_edp_link_settingsMichael Strauss
[Why & How] Static cleanup for eDP ILR Support. Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Fix DSC enable sequenceMike Hsieh
[Why] DSC is enabled before reset link and potentially cause DSC enable fail problem. [How] Enable DSC after link is reseted Signed-off-by: Mike Hsieh <chun-wei.hsieh@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Disable boot optimizations if ILR optimzation is requiredMichael Strauss
[Why] VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table If eDP fastboot optimizations are enabled, the link rate remains at max after init [How] Determine optimal link rate during boot, disable seamless boot and eDP fastboot optimizations if link rate optimization is required Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Add debug flag to enable eDP ILR by defaultMichael Strauss
[Why & How] Allow per-asic enablement of ILR feature with debug flag Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Update DCN302 SR Exit LatencyJoshua Aberback
[Why&How] Update SR Exit Latency to fix screen flickering caused due to OTG underflow. This is the recommended value given by the hardware IP team. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: 3.2.130Aric Cyr
DC version 3.2.130 brings improvements in multiple areas. In summary, we highlight: - Firmware release 0.0.59 - Fixes on display experiences for 4k TVs, register mask missing, etc. - Enhancements on MST, code cleaning and debug messages. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Cleanup DML DSC input bpc validationNicholas Kazlauskas
[Why & How] Pipe input DSC bpc has a type mismatch with maximum DSC input bpc - align the maximum with the pipe input type, unsigned integer. When checking the type we shoudl also check for an implicit value of 0 and align with what the spreadsheet does - default to max. Rename output_bpc to dsc_input_bpc to reflect what the field is actually used for. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add missing mask for DCN3Qingqing Zhuo
[Why] DCN3 is not reusing DCN1 mask_sh_list, causing SURFACE_FLIP_INT_MASK missing in the mapping. [How] Add the corresponding entry to DCN3 list. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Set initial value to a dividerMikita Lipski
[why/how] Due to compiler optimization the values would be passed to the division function uninitialized causing a div by zero. Initialize the numerator and denominator to 0 and 1 to prevent division by zero. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add function and debugfs to dump DCC_EN bitVictor Lu
[why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add dc_debug flag to disable min fclkHarry Wentland
[Why&How] Add debug flag for an option to disable min fclk. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add debug prints for SMU messagesHarry Wentland
[Why&How] Add debug prints for SMU messages with regard to versions, clocks, and more. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Robin Singh <Robin.Singh@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Added dc_edp_id_count to dc_contextJake Wang
[Why] We need to keep track of the number of eDP links to properly enumerate edp panel control instance. [How] Added dc_edp_id_count to dc_context to keep track of number of eDP links. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Move vupdate keepout programming from DCN20 to DCN10Leo Li
[Why] The OTG_VUPDATE_KEEPOUT register and fields is available on DCN10, and named the same in DCN20. [How] Move register definition and programming function to dcn10 optc. There is no functional change. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: add NULL check to avoid kernel crash in DC.Robin Singh
[why] There is case when the userspace like IGT test updates the custom timings, i.e. the number of active lines CRTC property value, and without committing the change, followed by resetting the display, creating FB and plane to the pipe and committing. The NULL pointer of pipe_ctx->plane_state occurs and result in kernel crash. We need to avoid that. [how] add pointer check for the dc_plane_state of the pipe context in the call of committing planes for stream in DC component. Signed-off-by: Robin Singh <robin.singh@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Retry getting PSR state if command times outWyatt Wood
[Why] GPINT command to get PSR state from FW times out. [How] Add retry to get valid PSR state. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: add DMCUB trace irq support for DCN302Guchun Chen
Otherwise, below errors will be found on DIMGREY_CAVEFISH with DCN302. Error log observed in driver load: [drm:amdgpu_dm_irq_register_interrupt [amdgpu]] *ERROR* DM_IRQ: invalid irq_source: 0! Error observed in mode1_rest sequence: [ 27.265920] #PF: supervisor read access in kernel mode [ 27.265941] #PF: error_code(0x0000) - not-present page [ 27.265956] PGD 0 P4D 0 [ 27.265967] Oops: 0000 [#1] SMP NOPTI [ 27.265979] CPU: 0 PID: 1360 Comm: cat Tainted: G W 5.11.0-99b3786c1770 #20210323 [ 27.266005] Hardware name: System manufacturer System Product Name/PRIME Z390-A, BIOS 1401 11/26/2019 [ 27.266033] RIP: 0010:dal_irq_service_ack+0x25/0x60 [amdgpu] [ 27.266203] Code: 5d 5d c3 66 90 0f 1f 44 00 00 55 83 fe 61 48 89 e5 77 27 89 f0 48 8d 04 40 48 c1 e0 04 48 03 47 08 74 17 48 8b 50 28 48 89 c6 <48> 8b 52 08 48 85 d2 74 20 e8 1d 64 45 c9 5d c3 89 f2 48 c7 c7 f0 [ 27.266248] RSP: 0018:ffffa115824a3c08 EFLAGS: 00010082 [ 27.266270] RAX: ffffffffc0942c10 RBX: ffffffffc0942c10 RCX: 0000000000000000 [ 27.266288] RDX: 0000000000000000 RSI: ffffffffc0942c10 RDI: ffff88d509cba7a0 [ 27.266312] RBP: ffffa115824a3c08 R08: 0000000000000000 R09: 0000000000000001 [ 27.266335] R10: ffffa115824a3b20 R11: ffffa115824a3b58 R12: ffff88d509cba7a0 [ 27.266353] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000246 [ 27.266377] FS: 00007fb3e2438580(0000) GS:ffff88d50dc00000(0000) knlGS:0000000000000000 [ 27.266402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.266417] CR2: 0000000000000008 CR3: 000000083e5ac006 CR4: 00000000003706f0 [ 27.266441] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 27.266464] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 27.266483] Call Trace: [ 27.266491] dal_irq_service_set+0x31/0x80 [amdgpu] [ 27.266639] dc_interrupt_set+0x24/0x30 [amdgpu] [ 27.266775] amdgpu_dm_set_dmub_trace_irq_state+0x22/0x30 [amdgpu] [ 27.266920] amdgpu_irq_update+0x57/0xa0 [amdgpu] [ 27.267030] amdgpu_irq_gpu_reset_resume_helper+0x64/0xa0 [amdgpu] [ 27.267135] amdgpu_do_asic_reset+0x211/0x420 [amdgpu] [ 27.267232] amdgpu_device_gpu_recover+0x517/0xa70 [amdgpu] [ 27.267325] gpu_recover_get+0x2e/0x60 [amdgpu] [ 27.267421] simple_attr_read+0x6b/0x130 [ 27.267441] debugfs_attr_read+0x49/0x70 [ 27.267454] full_proxy_read+0x5c/0x90 [ 27.267474] vfs_read+0xa1/0x190 [ 27.267486] ksys_read+0xa7/0xe0 [ 27.267501] __x64_sys_read+0x1a/0x20 [ 27.267521] do_syscall_64+0x37/0x80 [ 27.267541] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 27.267562] RIP: 0033:0x7fb3e2356142 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: 3.2.129Aric Cyr
This version brings along following features/fixes: - LTTPR improvements - Disable MALL when SMU not present - Fix bug in HW that causes P-State to hang when DPG is enabled in certain conditions - Update code path for enabling DPG - Update display endpoint control path - Add dynamic link encoder selection - Fix debugfs MST topology to dump from the root MST node - Enable DP DSC Compliance automation for Linux - ASSR is enabled only when DPCD is supported and the display connected is internal - Added kernel trace event to print real-time refresh rate value to debug VRR issues Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Disable MALL when SMU not presentChris Park
[Why] Bring-up purpose code to disable DMUB calling into SMU and timeout for MALL when SMU is not present. [How] Disable MALL when SMU is not present. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: add log for automated testQingqing Zhuo
[Why&How] Add log for easier debug purposes. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Set max TTU on DPG enableWesley Chalmers
[WHY] There is a bug in HW that causes P-State to hang when DPG is enabled in certain conditions. [HOW] The solution is to force MIN_TTU_VBLANK register to maximum value whenever DPG has been enabled. Make stream do a full update on test pattern change, so that the TTUs get updated. When DPG is enabled, update the ttu_regs.min_ttu_vblank field of each pipe in the stream's topology to the maximum value (0xffffff). v2: squash in build fix for when DCN is not defined (Alex) Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: New path for enabling DPGWesley Chalmers
[WHY] We want to make enabling test pattern a part of the stream update code path. This change is the first step towards that goal. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Update display endpoint control path.Jimmy Kizito
[Why] Some display endpoints may be dynamically mapped to the link encoders which drive them. [How] Update the code paths for display enabling/disabling to accommodate the dynamic association between links and link encoders. Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add dynamic link encoder selection.Jimmy Kizito
[Why] Some display endpoints may be programmably mapped to compatible link encoders. The assignment of link encoders to links has to be dynamic to accommodate the increased flexibility in comparison to conventional display endpoints. [How] - Add link encoder assignment tracking variables. - Execute link encoder assignment algorithm before enabling link and release link encoders from links once they are disabled. Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: LTTPR config logicWesley Chalmers
[WHY] Some systems can enable LTTPR through bits in BIOS, while other systems can be configured at boot to enable LTTPR. Some configs enable Non-Transparent mode, while others enable Transparent mode. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Enumerate LTTPR modesWesley Chalmers
[WHY] There are three possible modes for LTTPR: - Non-LTTPR mode, where AUX timeout is 400 us and no per-hop link training is done - LTTPR Transparent mode, where AUX timeout is 3200 us and no per-hop link training is done - LTTPR Non-Transparent mode, where AUX timeout is 3200 us and per-hop link training is done [HOW] Use an enum instead of a bool to track LTTPR state; modify comparisons accordingly. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Interface for LTTPR interopWesley Chalmers
[WHY] The logic to toggle LTTPR transparent/non-transparent requires 2 flags provided by BIOS [HOW] Repurpose the interface to get dce caps so both LTTPR querying functions can use them. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 12:44:29 +0000