summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/link
AgeCommit message (Collapse)Author
2025-01-06drm/amd/display: Parse RECEIVE_PORT0_CAP capabilities from DPCDGeorge Shen
[Why] DPCD register RECEIVE_PORT0_CAP contains HBlank expansion/reduction capabilities of a DP device. These capabilities are required to enable HBlank expansion/reduction logic. [How] Read raw RECEIVE_PORT0_CAP register values and store parsed fields. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-18drm/amd/display: Block Invalid TMDS operationChris Park
[Why] When sink type is TMDS, PHY programming does not block against pixel clock greater than 600MHz. [How] Based on sink type, block greater than 600MHz phy programming. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-10drm/amd/display: Adjust DPCD read for DP tunnelingCruise
Move DP tunneling field DPCD reading after all other RX caps are read. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Cruise <Cruise.Hung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Read DP tunneling support only for DPIA endpointsAurabindo Pillai
Unconditionally reading DP tunneling support results in extraneous errors messages on certain devices. Fix this by guarding the DPCD read for DP tunneling support for USB4 DPIA endpoints. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Refactor HPD IRQ error checking flowLeon Huang
[Why] HPD error status does not cover Replay desync error status while executing autotests and CTS tests. [How] Refactor the checking flow, reporting the HPD error based on different eDP feature. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Implement new backlight_level_params structureKaitlyn Tse
[Why] Implement the new backlight_level_params structure as part of the VBAC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Modified existing functions to include the new backlight_level_params structure. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04Revert "drm/amd/display: Block UHBR Based On USB-C PD Cable ID"Ausef Yousof
This reverts commit 4f01a68751194d05280d659a65758c09e4af04d6. [why & how] The offending commit caused a lighting issue for Samsung Odyssey G9 monitors when connecting via USB-C. The commit was intended to block certain UHBR rates. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Refactoring if and endif statements to enable DC_LOGGERLohita Mudimela
[Why] For Header related changes for core [How] Refactoring if and endif statements to enable DC_LOGGER Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Optimize power up sequence for specific OLEDOvidiu Bunea
[why & how] OLED power up sequence takes an extra 150ms via hardcoded delay, but there is a strict requirement on DisplayOn resume time. For customer panel, remove these delays to meet target until a cleaner solution is can be put in place. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Add a Precise Delay RoutineFangzhi Zuo
Fix DP compliance failures 4.2.2.12, 4.3.1.21, 4.9.1.19 caused by imprecise delay on fsleep(). Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Fix spelling mistake "tunndeling" -> "tunneling"Colin Ian King
There is a spelling mistake in a dm_error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Check returned status from core_link_read_dpcdAlex Hung
[WHAT] The function core_link_read_dpcd returns status which is not used at all, making them useless assignments. [HOW] Print error messages if core_link_read_dpcd does not return DC_OK. This fixes 2 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Read Sink emission rate capabilityRobin Chen
[WHY] To get sink emission rate information for future supported refresh rate calculation. Reviewed-by: ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: print messages when programming shaper/3dlut failsAlex Hung
[WHAT & HOW] Print error messages when programming shaper lut or 3dlut fails. This fixes 5 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Remove useless assignmentsAlex Hung
[WHAT & HOW] "split_pipe" are assigned to test_pipe and then immediately are updated to other values. The same also applies to "status" as well. Similarly, "id", "dwb" and "unused_dpps" are assigned but the functions immediately return, and thus they have no effects. As a results, the assignments removed. This fixes 5 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Check status from dpcd_get_tunneling_device_dataAlex Hung
[WHAT & HOW] dpcd_get_tunneling_device_data calls core_link_read_dpcd which can fail. The status from core_link_read_dpcd should be checked and error messages is printed in case of failures. This fixes 1 UNUSED_VALUE issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Initialize new backlight_level_params structureKaitlyn Tse
[Why] Initialize the new backlight_level_params structure as part of the ABC framework, the information in this structure is needed to be passed down to the DMCUB to identify the backlight control type, to adjust the backlight of the panel and to perform any required conversions from PWM to nits or vice versa. [How] Created initial framework of the backlight_level_params struct and modified existing functions to include the new structure. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Initialize replay_config varKaitlyn Tse
[Why] Uninitialized variables could cause some bits to be set, thus enabling features unintentionally. [How] Initialize replay_config variable to avoid future issues. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Kaitlyn Tse <Kaitlyn.Tse@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: force TBT4 dock dsc onFudongwang
[why] TBT4 dock have bandwidth limitation, need dsc always on to support all modes. [how] force dsc always on when detect TBT4 dock. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Introduce New ABC Framework for Brightness ControlMuyuan Yang
Adjust the existing brightness control functions to use the new ABC Framework and prioritize Aux-based brightness control. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Muyuan Yang <muyuan.yang@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: add more support for UHBR10 eDPLiu Xi (Alex)
[Why and how] The current UHBR10 eDP panel has new security feature update. Add support for the new FW Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Liu Xi (Alex) <xi.liu@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Block UHBR Based On USB-C PD Cable IDMichael Strauss
[WHY] Currently the absence of UHBR cable ID caps from USB-C PD does not block UHBR rates. In situations where DPCD reports valid UHBR capability but USB-C PD does not, such as using a USB-C to DP1.4 dongle connected to a native DP2.1 cable, link loss and lightup failures can be seen as a result. Additionally, in edge cases where a platform supports cable ID but DMUB doesn't correctly return cable ID caps, driver currently also allows UHBR. [HOW] Block UHBR rates over DP alt mode if cable id indicates no UHBR support. Additionally, block UHBR rates if a cable ID supported platform receives no reply from a DMUB cable id query. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Implement new DPCD register handlingRyan Seto
[WHY] There are some monitor timings that seem to be supported without DSC but actually require DSC to be displayed. A VESA SCR introduced a new max uncompressed pixel rate cap register that we can use to handle these edge cases. [HOW] SST: Read caps from link and invalidate timings that exceed the max limit but do not support DSC. Then check for options override when determining BPP. MST: Read caps from virtual DPCD peer device or daisy chained SST monitor and set validation set BPPs to max if pixel rate exceeds uncompressed limit. Validation set optimization continues as normal. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: fix double free issue during amdgpu module unloadTim Huang
Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Fix construct_phy with MXM connectorIlya Bakoulin
[Why/How] The call to construct_phy will fail in cases where connector type is MXM, and the dc_link won't be properly created/initialized. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Support UHBR10 link rate on eDPSung Joon Kim
[why] Supporting UHBR10 link rate on eDP leverages the existing DP2.0 code but need to add some small adjustments in code. [how] Acknowledge the given DPCD caps for UHBR10 link rate support and allow DP2.0 programming sequence and link training for eDP. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Allow UHBR Interop With eDP Supported Link Rates TableMichael Strauss
[WHY] eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR link optimization does not account for UHBR capabilities. Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR rates. [HOW] Add extra Supported Link Rates table translations for UHBR10/13.5/20. Update eDP link setting optimization search to be aware of 128b/132b DPCD rate caps in order to unblock UHBR on panels with Supported Link Rates table. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Revert Avoid overflow assignmentGabe Teeger
This reverts commit a15268787b79 ("drm/amd/display: Avoid overflow assignment in link_dp_cts") Due to regression causing DPMS hang. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Print Pcon FRL Link BW in Debug MessageFangzhi Zuo
Under autonomous mode, source reads dpcd DP_PCON_HDMI_POST_FRL_STATUS for the frl link status. Without dsc passthrough, it serves as bw bottleneck on the entire link, compared with the dp link from source to the converter where dsc is available. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Avoid overflow assignment in link_dp_ctsAlex Hung
sampling_rate is an uint8_t but is assigned an unsigned int, and thus it can overflow. As a result, sampling_rate is changed to uint32_t. Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should only be assigned to a value less or equal than 4. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Check link_res->hpo_dp_link_enc before using itAlex Hung
[WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 1 FORWARD_NULL issue reported by Coverity. Fixes: 0beca868cde8 ("drm/amd/display: Check link_res->hpo_dp_link_enc before using it") Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Check null pointers before multiple usesAlex Hung
[WHAT & HOW] Poniters, such as stream_enc and dc->bw_vbios, are null checked previously in the same function, so Coverity warns "implies that stream_enc and dc->bw_vbios might be null". They are used multiple times in the subsequent code and need to be checked. This fixes 10 FORWARD_NULL issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Check null pointers before usedAlex Hung
[WHAT & HOW] Poniters, such as dc->clk_mgr, are null checked previously in the same function, so Coverity warns "implies that "dc->clk_mgr" might be null". As a result, these pointers need to be checked when used again. This fixes 10 FORWARD_NULL issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Check link_res->hpo_dp_link_enc before using itAlex Hung
[WHAT & HOW] Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res without initializing hpo_dp_link_enc and it is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Fix DP-DVI dongle hotplugGabe Teeger
[why] Hotplugging with a DVI-DP dongle on pre-rdna embedded platform working about half the time. The regression was found to be the setting of link->type here. [what] Reverts fix besides the logging added. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: fix dscclk programming sequence on DCN401Wenjing Liu
[why] The mux to switch between refclk and dto_dsc_clk is non double buffered. However dto dsc clk's phase and modulo divider registers are currently configured as double buffered update. This causes a problem when we switch to use dto dsc clk and program phase and modulo in the same sequence. In this sequence dsc clk is switched to dto but the clock divider programming doesn't take effect until next frame. When we try to program DSCC registers, SMN bus will hang because dto dsc clk divider phase is set to 0. [how] Configure phase and modulo to take effect immediately. Always switch to dto dsc clk before DSC clock is unagted. Switch back to refclk after DSC clock is gated. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Replace assert with error message in dp_retrieve_lttpr_cap()Roman Li
[Why] When assert in dp_retrieve_lttpr_cap() is hit, dmesg has traces like: RIP: 0010:dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] Call Trace: <TASK> dp_retrieve_lttpr_cap+0xcc/0x1a0 [amdgpu] report_bug+0x1e8/0x240 handle_bug+0x46/0x80 link_detect+0x35/0x580 [amdgpu] It happens when LTTPRs fail to increment dpcd repeater count. We have a recovery action in place for such cases. Assert is misleading, an indicative error in dmesg is more useful. [How] Remove ASSERT and use DC_LOG_ERROR instead. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-16drm/amd/display: Move DIO documentation to the right placeRodrigo Siqueira
When building the kernel-doc, it complains with the below warning: ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found ./drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_dio.h:1: warning: no structured comments found This warning was caused by the wrong use of the ':export:' and the lack of function documentation in the file pointed under the ':internal:'. This commit addresses those issues by relocating the overview documentation to the correct C file, removing the ':export:' options, and adding two simple kernel-doc to ensure that ':internal:' does not have any warning. Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/dri-devel/20240715085918.68f5ecc9@canb.auug.org.au/ Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Fix possible overflow in integer multiplicationAlex Hung
[WHAT & HOW] Integer multiplies integer may overflow in context that expects an expression of unsigned/siged long long (64 bits). This can be fixed by casting integer to unsigned/siged long long to force 64 bits results. This fixes 26 OVERFLOW_BEFORE_WIDEN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Validate function returnsAlex Hung
[WHAT & HOW] Function return values must be checked before data can be used in subsequent functions. This fixes 4 CHECKED_RETURN issues reported by Coverity. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Fix reduced resolution and refresh rateDaniel Sa
[WHY] Some monitors are forced to a lower resolution and refresh rate after system restarts. [HOW] Some monitors may give invalid LTTPR information when queried such as indicating they have one DP lane instead of 4. If given an invalid DPCD version, skip over getting lttpr link rate and lane counts. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Sa <daniel.sa@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Run DC_LOG_DC after checking link->link_encAlex Hung
[WHAT] The DC_LOG_DC should be run after link->link_enc is checked, not before. This fixes 1 REVERSE_INULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Remove redundant checks for pipe_ctx->streamAlex Hung
[WHAT & HOW] The null checks for pipe_ctx->stream and pipe_ctx->stream_res.tg are redundant as they were already dereferenced previously, as reported by Coverity; therefore the null checks are removed. This fixes 6 REVERSE_INULL issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-27drm/amd/display: Send DP_TOTAL_LTTPR_CNT during detection if LTTPR is presentMichael Strauss
[WHY] New register field added in DP2.1 SCR, needed for auxless ALPM [HOW] Echo value read from 0xF0007 back to sink Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14Revert "drm/amd/display: workaround for oled eDP not lighting up on DCN401"Joshua Aberback
This reverts commit e902dd7f3e3b93a401e1d3c0322cce933e75e809. A proper fix for this issue has been implemented in DMUB FW. So, no need to keep the workaround. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Remove reduntant comparisons by CoverityIvan Lipski
[WHY] Coverity analysis of the Upstream display driver code (amd-staging-drm-next) flagged these three functions as containing 'CONSTANT_EXPRESSION_RESULT' errors, i. e. the conditionals are reduntant since their result is predetermined. fixpt31_32.c: The two flagged 'ASSERT' lines redundant since they are always true: - LONG_MAX equals to the largest 'signed long long' number - res.value is type 'signed long long', So, the condition inside the 'ASSERTS's is always link_dp_training.c: The flagged conditional statement is always false: - 'max_requested.FFE_PRESET.settings.level' is 4 bits, so its max possible value is 15 - 'DP_FFE_PRESET_MAX_LEVEL' equals to 15. So, the conditional statement is always false and the wrapped code never executes. [HOW] Removed lines flagged by Coverity analysis. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Ivan Lipski <ivlipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14Revert "drm/amd/display: Handle HPD_IRQ for internal link"Sung-huai Wang
[How&Why] This reverts commit 239b31bd5c3fef3698440bf6436b2068c6bb08a3. Due to the it effects Replay resync. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Sung-huai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 10:42:11 +0000