summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn31
AgeCommit message (Collapse)Author
2021-10-19drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1Nikola Cornij
[why] The requirement is that image width up to 4096 shall be supported Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Removed power down on boot from DCN31Lai, Derek
[Why] Error message on Linux when booting. [How] Removed power down on boot from DCN31 HW init to match DCN10 HW init. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Derek Lai <derek.lai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: correct apg audio channel enable golden valueWenjing Liu
Hardware team has recommended to generically hard code this register to 0xFF as part of the effort to eventually remove this control. However we set it to 0xF instead. This causes 4 of audio 8ch to be muted. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Clean Up VPG Low Mem PowerMichael Strauss
[WHAT] One of the current VPG power on calls is unnecessary Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19drm/amd/display: Disable dpp root clock when not being usedJake Wang
[Why & How] Disable root clock for dpp when not being used. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Fix detection of 4 lane for DPALTHansen
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Limit display scaling to up to 4k for DCN 3.1Nikola Cornij
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-06drm/amd/display: Fix DIG_HPD_SELECT for USB4 display endpoints.Jimmy Kizito
[Why] DIB_BE_CNTL<i>.DIG_HPD_SELECT selects the HPD block being used by the display endpoint assigned to DIG<i>. In the case of USB4 display endpoints, no physical HPD block is assigned. [How] Setting DIB_BE_CNTL<i>.DIG_HPD_SELECT to 5 indicates that no HPD is assigned to a display endpoint. Firmware decrements the HPD_SELECT value by 1 before writing it to the register. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add dpia debug optionsMeenakshikumar Somasundaram
[Why & How] To add support for dpia debug options. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Implement DPIA link configurationJimmy Kizito
[Why] Training settings need to be applied to DPIA link at start of each training loop. Note: FEC readiness should be configured before link training while FEC enablement should be configured once training is complete. [How] - Implement DPIA link configuration function. - Account for dynamically assigned link encoders during link configuration. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Stub out DPIA link training callJimmy Kizito
[why & how] Add stub for DPIA link training and define new DPIA DMUB commands to support it. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: USB4 DPIA enumeration and AUX TunnelingMeenakshikumar Somasundaram
[WHY] To enable dc links for USB4 DPIA ports and AUX command tunneling for YELLOW_CARP_B0. [HOW] 1) Created dc links for all USB4 DPIA ports in create_links(). dc_link_construct() implementation is split for legacy DDC and DPIAs. As usb4 has no ddc, ddc->ddc_pin will be set to NULL for its dc link and this parameter will be used to identify the dc links as DPIA. The dc link for DPIA is further to be enhanced with implementation for link encoder and link initialization. 2) usb4_dpia_count in struct resource_pool will be initialized to 4 in dcn31_resource_construct() if the DCN is YELLOW_CARP_B0. 3) Enabled DMUB AUX via outbox for YELLOW_CARP_B0. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add helper for blanking all dp displaysLeo (Hanghong) Ma
[Why & How] The codes to blank all dp display have been called many times, so add a helper in dc_link to make it more concise. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Fix detection of 4 lane for DPALTHansen
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Limit display scaling to up to 4k for DCN 3.1Nikola Cornij
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b)
2021-10-05drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70)
2021-09-29drm/amd/display: Defer LUT memory powerdown until LUT bypass latchesMichael Strauss
[WHY] Blnd, 3dlut, and shaper LUT select registers are double buffered, however their accompanying LUT memory shutdown registers are not. As a result, shutting down LUT memory immediately after setting a block to bypass causes corruption as bypass only happens at next Vupdate. [HOW] Re-enable mem low power for CM block Force optimization on next flip and disable LUT memory during optimization sequence if LUT select field is then set to bypass v2: squash in CONFIG_DRM_AMD_DC_DCN fix (Alex) Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: DIG mapping change is causing a blockerLiu, Zhan
[Why] DIG mapping change is causing a blocker [How] Revert the change for now. We will re-implement it later. Reviewed-by: Jimmy Kizito <jimmy.kizito@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Disable mem low power for CM HW block on DCN3.1Michael Strauss
[WHY] Currently causes visible flicker in some scenarios on OLED eDPs Reviewed-by: Haonan Wang <haonan.wang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix issue with dynamic bpp change for DCN3xGuo, Bing
Why: Screen sometimes would have artifacts or blink once at the time when bpp is dynamically changed. How: 1. Changed to update PPS infopacket in frame mode instead of immediate mode since other updates for bpp change are double-buffered. 2. Changed double-buffering enablement programming for DCN30 as advised by ASIC team Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bing Guo <Bing.Guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Added power down on boot for DCN3Lai, Derek
[Why] The change of setting a timer callback on boot for 10 seconds is still working, just lost power down on boot and power down for DCN3. [How] Added power down on boot and power down for DCN3. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Derek Lai <Derek.Lai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix dynamic encoder reassignmentJimmy Kizito
[Why] Incorrect encoder assignments were being used while applying a new state to hardware. (1) When committing a new state to hardware requires resetting the back-end, the encoder assignments of the current or old state should be used when disabling the back-end; and the encoder assignments for the next or new state should be used when re-enabling the back-end. (2) Link training on hot plug could take over an encoder already in use by another stream without first disabling it. [How] (1) Introduce a resource context 'link_enc_cfg_context' which includes: - a mode to indicate when transitioning from current to next state. - transient encoder assignments to use during this state transition. Update the encoder configuration interface to respond to queries about encoder assignment based on the mode of operation. (2) Check if an encoder is already in use before attempting to perform link training on hot plug. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Enable mem low power control for DCN3.1 sub-IP blocksMichael Strauss
[WHY] Sequences to handle powering down these sub-IP blocks are now ready for use Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add VPG and AFMT low power support for DCN3.1Michael Strauss
[WHY] Power down VPG and AFMT blocks when not in use [HOW] Create afmt31 and vpg31 structs and add necessary fields to reg list Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add periodic detection when zstate is enabledEric Yang
[Why] When system is in Z10 HPD interrupts cannot fire, we may miss display configuration changes. [How] When Zstate is enabled, if DMUB indicate DCN has lost power, do a complete detection periodically. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix multiple memory leaks reported by coverityAnson Jacob
coccinelle patch used: @@ expression enc1,vpg,afmt; @@ - if (!enc1 || !vpg || !afmt) + if (!enc1 || !vpg || !afmt) { + kfree(enc1); + kfree(vpg); + kfree(afmt); return NULL; + } Addresses-Coverity-ID: 1466017: ("Resource leaks") Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix dynamic link encoder access.Jimmy Kizito
[Why] Assuming DIG link encoders are statically mapped to links can cause system instability due to null pointer accesses. [How] - Add checks for non-null link encoder pointers before trying to access them. - When a hardware platform uses dynamic DIG assignment (i.e. resource function 'link_encs_assign' defined) and a link supports flexible mapping to DIGs, use the link_enc_cfg API to access the DIG assigned to a link or stream. Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: unblock abm when odm is enabled only on configs that support itJosip Pavic
[Why] When ODM is enabled, ABM is blocked on dcn31 but unblocked on dcn30. Since the dcn31 firmware is now able to handle ABM interop with ODM, it is no longer necessary to block ABM when ODM is enabled. Since the dcn30 firmware does not handle ABM interop with ODM, leaving that combination unblocked can lead to one side of the screen appearing brighter than the other. [How] When ODM is enabled, unblock abm on dcn31 and block it on dcn30 Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add DPCD writes at key pointsLeo (Hanghong) Ma
This reverts commit "Revert "Add DPCD writes at key points" ". The following patch will fix the system hang issue. v2: squash in indentation warning fix Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: fix spelling mistake "alidation" -> "validation"Colin Ian King
There is a spelling mistake in a DC_LOG_WARNING message. Fix it. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Set min dcfclk if pipe count is 0Michael Strauss
[WHY] Clocks don't get recalculated in 0 stream/0 pipe configs, blocking S0i3 if dcfclk gets high enough [HOW] Create DCN31 copy of DCN30 bandwidth validation func which doesn't entirely skip validation in 0 pipe scenarios Override dcfclk to vlevel 0/min value during validation if pipe count is 0 Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: add missing ABM register offsetsJosip Pavic
[Why] Some ABM registers don't exist on DCN 3.01, so are missing from its register offset list. However, this list was copied to later versions of DCN that do have these registers. As a result, they're inaccessible from the driver on those DCN versions even though they exist. [How] Add the missing ABM register offsets to DCN 3.02+ Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 SST DC SupportFangzhi Zuo
1. Retrieve 128/132b link cap. 2. 128/132b link training and payload allocation. 3. UHBR10 link rate support. [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 DCCGFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | | +--------------------+ | | v ===============|============= v +------------------+ | DIO Output Mux | +------------------+ | v +-----+ | PHY | +-----+ | PHYD32CLK[0] v +------+ | DCCG | +------+ | v SYMCLK32 Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 HPO Link EncoderFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | v +--------------------+ [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 HPO Stream EncoderFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | v v v v +----------------------+ | HPO Stream Encoder | +----------------------+ [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 Audio Package GeneratorFangzhi Zuo
HW Blocks: +-----+ | HDA | +-----+ | | HPO ===============|============= | v | +-----+ | | APG | v +-----+ Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm:dcn31: fix boolreturn.cocci warningsJing Yangyang
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_backlight_on' with return type bool ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_powered_on' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: refactor riommu invalidation waEric Yang
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Ensure DCN save after VM setupJake Wang
[Why] DM initializes VM context after DMCUB initialization. This results in loss of DCN_VM_CONTEXT registers after z10. [How] Notify DMCUB when VM setup is complete, and have DMCUB save init registers. v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-05drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
2021-07-28drm/amd/display: refactor riommu invalidation waEric Yang
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: add workaround for riommu invalidation request hangEric Yang
[Why] When an riommu invalidation request come at the same time as a pipe is disabled there can be a case where DCN cannot ACK the request if only one VMID is setup in the inuse list. [How] Setup a second unused VMID will work around the issue. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fixed hardware power down bypass during headless bootJake Wang
[Why] During headless boot, DIG may be on which causes HW/SW discrepancies. To avoid this we power down hardware on boot if DIG is turned on. With introduction of multiple eDP, hardware power down is being bypassed under certain conditions. [How] Fixed hardware power down bypass, and ensured hardware will power down if DIG is on and seamless boot is not enabled. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 10:21:37 +0000