summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn30
AgeCommit message (Collapse)Author
2023-08-30drm/amd/display: Update DCN32 for DCN35 supportQingqing Zhuo
[Why & How] Update DCN32 files for DCN35 usage. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Update DCN30 for DCN35 supportQingqing Zhuo
[Why & How] Update DCN30 files for DCN35 usage. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add more pipe resource interfacesWenjing Liu
Redesign pipe resource interfaces in resource.h file. The new interface design addresses the issue with lack of pipe topology encapsulation and lack of pipe accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: PQ tail accuracyKrunoslav Kovac
[WHY & HOW] HW LUTs changed slightly in DCN3: 256 base+slope pairs were replaced by 257 bases. Code was still calculating all 256 base+slope and then creating 257th pt as last base + last slope. This was done in wrong format, and then "fixed" it by making the last two points the same thus making the last slope=0. However, this also created some precision problems near the end that are not visible but they do show up with capture cards. Solution is to calculate 257 and remove deltas since we no longer have those HW registers. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: enable low power mode for VGA memoryAurabindo Pillai
[Why] When unused, all memory blocks should be put in a low power state [How] Check the value of enable_mem_low_power.bits.vga and set corresponding bit in the hardware register Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: avoid crash and add z8_marks related in dmlCharlene Liu
[why] add dml1 used calculate_wm_and_dlg function pointer check to prevent crash. add z8 watermarks to struct for later asic use Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: rename acquire_idle_pipe_for_layer to ↵Wenjing Liu
acquire_free_pipe_as_sec_dpp_pipe [why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: check attr flag before set cursor degamma on DCN3+Melissa Wen
Don't set predefined degamma curve to cursor plane if the cursor attribute flag is not set. Applying a degamma curve to the cursor by default breaks userspace expectation. Checking the flag before performing any color transformation prevents too dark cursor gamma in DCN3+ on many Linux desktop environment (KDE Plasma, GNOME, wlroots-based, etc.) as reported at: - https://gitlab.freedesktop.org/drm/amd/-/issues/1513 This is the same approach followed by DCN2 drivers where the issue is not present. Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Refactor recout calculation with a more generic formulaWenjing Liu
[Why] Current recout calculation has a few assumptions and implementation for MPO + ODM combine calculation is very specific. The equation has too many cases without enough comments to document the detail. [How] The change remove the following assumptions: 1. When MPO is enabled, we only allow ODM Combine 2:1 2. ODM Combine always has even segment width. 3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from its top pipe. The change applies a generic formula with more details in comment to document this solution so it is eaiser to learn and debug later. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-13drm/amd/display: export some optc function for reuseAurabindo Pillai
[Why&How] Make a few functions non static so that they can be reused for other asic. This is in preparation for separating out OTG programming sequence for DCN301 Fixes: 1598fc576420 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+") Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-10drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-07drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Fixes: 613a7956deb3 ("drm/amd/display: Add monitor specific edid quirk") Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Create debugging mechanism for Gaming FAMSGianna Binder
[WHY] To enable FAMS even during gaming sessions. [HOW] By leveraging a new dc.debug parameter. Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Gianna Binder <gianna.binder@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Fix the delta clamping for shaper LUTHarry Wentland
The shaper LUT requires a 10-bit value of the delta between segments. We were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we want it to do. It will preserve 10-bit precision after the decimal point, but that's not quite what we want. We want 14-bit precision and discard the 4 most-significant bytes. To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: enable the new fast update path for supported ASICsAlvin Lee
The new fast update sequence is now supported on some ASICs. So, enable it by default for all applicable ASICs. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-19Backmerge tag 'v6.4-rc7' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Linux 6.4-rc7 Need this to pull in the msm work. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-06-15drm/amdgpu: Add missing function parameter 'optc' & 'enable' to kdoc in ↵Srinivasan Shanmugam
optc3_set_timing_double_buffer() Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:285: warning: Function parameter or member 'optc' not described in 'optc3_set_timing_double_buffer' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:285: warning: Function parameter or member 'enable' not described in 'optc3_set_timing_double_buffer' Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Limit Minimum FreeSync Refresh RateAustin Zheng
Why: Some EDIDs report a minimum refresh rate lower than what HW can support How: Add a check to calculate minimum supported refresh rate with current timing and use that as the minimum if a lower one is passed in Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15Merge tag 'amd-drm-next-6.5-2023-06-09' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
2023-06-09drm/amd/display: remove unused definitionYang Li
Eliminate the following warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1079:43: warning: unused variable 'res_create_maximus_funcs' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:731:38: warning: unused variable 'debug_defaults_diags' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5296 Fixes: 25879d7b4986 ("drm/amd/display: Clean FPGA code in dc") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer
This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: Block optimize on consecutive FAMS enables"Michel Dänzer
This reverts commit 751e17147953bc30036b8fe0eaaf780b6951404c. It depends on its parent commit, which we want to revert. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> [Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()] Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Reorganize DCN30 MakefileRodrigo Siqueira
DCN30 has a lot of files in the Makefile, and adding each one next to the other makes it hard to read and can increase the chance of merge conflicts. This commit just reorganize the Makefile to put each file associated with DCN30 in its own line. Reviewed-by: Chris Park <chris.park@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add visual confirm color support for MCLK switchLeo (Hanghong) Ma
[Why && How] We would like to have visual confirm color support for MCLK switch. 1. Set visual confirm color to yellow: Vblank MCLK switch. 2. Set visual confirm color to cyan: FPO + Vblank MCLK switch. 3. Set visual confirm color to pink: Vactive MCLK switch. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add additional pstate registers to HW state querySung Lee
[WHY] These registers would be useful to know when debugging pstate issues. [HOW] Add additional registers to hw state query. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sung Lee <sunglee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-31Revert "drm/amd/display: Do not set drr on pipe commit"Michel Dänzer
This reverts commit 474f01015ffdb74e01c2eb3584a2822c64e7b2be. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-05-31Revert "drm/amd/display: Block optimize on consecutive FAMS enables"Michel Dänzer
This reverts commit ce560ac40272a5c8b5b68a9d63a75edd9e66aed2. It depends on its parent commit, which we want to revert. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> [Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()] Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Set min_width and min_height capability for DCN30Igor Kravchenko
Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-26drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-21drm/amd/display: update GSP1 generic info packet for PSRSUPo-Ting Chen
Base on PSRSU specification, every seletive update frame need to use two SDP to indicate the frame active range. So we occupy another GSP1 for PSRSU execution. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Po-Ting Chen <robin.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-21drm/amd/display: Set min_width and min_height capability for DCN30Igor Kravchenko
Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Add FAMS validation before trying to use itRodrigo Siqueira
To ensure that FAMS can be used, DC must check if there is VRR support. This commit adds the required configuration to ensure FAMS can be executed in the target system. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: refactor dmub commands into single functionJosip Pavic
[Why & How] Consolidate dmub access to a single interface. This makes it easier to add code in the future that needs to run every time a dmub command is requested (e.g. instrumentation, locking etc). Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Block optimize on consecutive FAMS enablesWesley Chalmers
[WHY] It is possible to commit state multiple times in rapid succession with FAMS enabled; if each of these commits were to set optimized_required, then the user may see latency. [HOW] fw_based_mclk_switching is currently not used in dc->clk_mgr; use it to track whether the current state has FAMS enabled; if it has, then do not disable FAMS in prepare_bandwidth, and do not set optimized_required. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: Do not set drr on pipe commitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-03Merge tag 'amd-drm-next-6.4-2023-03-31' of ↵Daniel Vetter
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-31: amdgpu: - Misc code cleanups - S4 fixes - MES fixes - SR-IOV fixes - Link DC backlight to connector device rather than PCI device - W=1 fixes - ASPM quirk - RAS fixes - DC dynamic split fixes and enablement for remaining chips - Navi1x SMU fix - Initial NBIO 7.9 support - Initial GC 9.4.3 support - Initial GFXHUB 1.2 support - Initial MMHUB 1.8 support - DCN 3.1.5 fixes - Initial DC FAMs infrastructure - Add support for 6.75Gbps link rates - Add sysfs nodes for secondary VCN clocks amdkfd: - Initial support for GC 9.4.3 radeon: - Convert to client-based fbdev emulation Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331221955.7896-1-alexander.deucher@amd.com
2023-03-31drm/amd/display: Mark function 'optc3_wait_drr_doublebuffer_pending_clear' ↵Caio Novais
as static Compiling AMD GPU drivers displays a warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:294:6: warning: no previous prototype for ‘optc3_wait_drr_doublebuffer_pending_clear’ [-Wmissing-prototypes] Get rid of it by marking the function as static Signed-off-by: Caio Novais <caionovais@usp.br> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: fixed dcn30+ underflow issueAyush Gupta
[Why] Observing underflow on dcn30+ system config at 4k144hz [How] We set the UCLK hardmax on AC/DC switch if softmax is enabled and also on boot. While booting up the UCLK Hardmax is set to softmax before the init sequence and the init sequence resets the hardmax to UCLK max which enables P-state switching. Just added a conditional check to avoid setting hardmax on init. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-31drm/amd/display: Use per pipe P-State force for FPOAlvin Lee
[Description] * Pass in pipe index for FPO cmd to DMCUB - This change will pass in the pipe index for each stream that is using FPO - This change is in preparation to enable FPO + VActive * Use per pipe P-State force for FPO - For FPO, instead of using max watermarks value for P-State disallow, use per pipe p-state force instead - This is in preparation to enable FPO + VActive Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-29Merge v6.3-rc4 into drm-nextDaniel Vetter
I just landed the fence deadline PR from Rob that a bunch of drivers want/need to apply driver-specific patches. Backmerge -rc4 so that they don't have to be stuck on -rc2 for no reason at all. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-03-20Merge tag 'amd-drm-next-6.4-2023-03-17' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.4-2023-03-17: amdgpu: - Misc code cleanups - Documentation fixes - Make kobj structures const - Add thermal throttling adjustments for supported APUs - UMC RAS fixes - Display reset fixes - DCN 3.2 fixes - Freesync fixes - DC code reorg - Generalize dmabuf import to work with KFD - DC DML fixes - SRIOV fixes - UVD code cleanups - IH 4.4.2 updates - HDP 4.4.2 updates - SDMA 4.4.2 updates - PSP 13.0.6 updates - Add capped/uncapped workload handling for supported APUs - DCN 3.1.4 updates - Re-org DC Kconfig - USB4 fixes - Reorg DC plane and stream handling - Register vga_switcheroo for apple-gmux - SMU 13.0.6 updates - Fix error checking in read_mm_registers functions for affected families - VCN 4.0.4 fix - Drop redundant pci_enable_pcie_error_reporting() call - RDNA2 SMU OD suspend/resume fix - Expose additional memory stats via fdinfo - RAS fixes - Misc display fixes - DP MST fixes - IOMMU regression fix for KFD amdkfd: - Make kobj structures const - Support for exporting buffers via dmabuf - Multi-VMA page migration fixes - NBIO fixes - Misc code cleanups - Fix possible double free - Fix possible UAF radeon: - iMac fix UAPI: - KFD dmabuf export support. Required for importing KFD buffers into GEM contexts and for RDMA P2P support. Proposed user mode changes: https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230317164416.138340-1-alexander.deucher@amd.com
2023-03-15drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Do not set DRR on pipe CommitWesley Chalmers
[WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: convert link.h functions to function pointer styleWenjing Liu
[Why & How] All dc subcomponents should call another dc component via function pointers stored in a component structure. This is part of dc coding convention since the beginning. The reason behind this is to improve encapsulation and polymorphism. The function contract is extracted into a single link service structure defined in link.h header file and implemented only in link_factory.c instead of spreading across multiple files in link component file structure. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: reset the scaler boundary modeZhikai Zhai
[WHY] The VBIOS select the black boundary mode when using auto scale mode. But it doesn't recover if there is no reset. [HOW] Clean the scaler boundary mode to default edge in the manual scale mode. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-08drm/amd/display: remove legacy fields of dc_plane_cap structDavid Tadokoro
The fields blends_with_above and blends_with_below of struct dc_plane_cap (defined in dc/dc.h) are boolean and set to true by default. All instances of a dc_plane_cap maintain the default values of both. Also, there is only one if statement that checks those fields and there would be the same effect if it was deleted (assuming that those fields are always going to be true). For this reason, considering both fields as legacy ones, this commit removes them and the aforementioned if statement. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: David Tadokoro <davidbtadokoro@usp.br> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 23:49:03 +0000