summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn21
AgeCommit message (Collapse)Author
2021-04-15drm/amd/display: Added support for multiple eDP BL controlJake Wang
[WHY & HOW] Driver currently assumes only 1 eDP is connected. Added support for multiple eDP BL control. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add function and debugfs to dump DCC_EN bitVictor Lu
[why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: revert max lb lines changeDmytro Laktyushkin
Some hardware revisions do have a max number of lines limitation not honouring which can cause pstate switch underflow. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: hide VGH asic specific structsDmytro Laktyushkin
The pmfw structs are specific to the asic and should not be present in base clk_mgr struct v2: squash in SI fix (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Separate caps for maximum RGB and YUV plane countsAtufa Khan
Not all ASICs have same plane capabilities so need to split them out for proper support handling. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Atufa Khan <Atufa.Khan@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: use max lb for latency hidingDmytro Laktyushkin
Enable max memory lb config to improve stutter efficiency and latency hiding. Also increase max number of lb lines to be used by dml since experiments have shown that there isnt a hard max beyond what fits in lb. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: remove duplicate include in dcn21 and gpioZhang Yunkai
'dce110_resource.h' included in 'dcn21_resource.c' is duplicated. 'hw_gpio.h' included in 'hw_factory_dce110.c' is duplicated. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Revert dram_clock_change_latency for DCN2.1Sung Lee
[WHY & HOW] Using values provided by DF for latency may cause hangs in multi display configurations. Revert change to previous value. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Enable pflip interrupt upon pipe enableQingqing Zhuo
[Why] pflip interrupt would not be enabled promptly if a pipe is disabled and re-enabled, causing flip_done timeout error during DP compliance tests [How] Enable pflip interrupt upon pipe enablement Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()Holger Hoffstätte
After fixing nested FPU contexts caused by 41401ac67791 we're still seeing complaints about spurious kernel_fpu_end(). As it turns out this was already fixed for dcn20 in commit f41ed88cbd ("drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal") but never moved forward to dcn21. Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-05drm/amd/display: Fix nested FPU context in dcn21_validate_bandwidth()Holger Hoffstätte
Commit 41401ac67791 added FPU wrappers to dcn21_validate_bandwidth(), which was correct. Unfortunately a nested function alredy contained DC_FP_START()/DC_FP_END() calls, which results in nested FPU context enter/exit and complaints by kernel_fpu_begin_mask(). This can be observed e.g. with 5.10.20, which backported 41401ac67791 and now emits the following warning on boot: WARNING: CPU: 6 PID: 858 at arch/x86/kernel/fpu/core.c:129 kernel_fpu_begin_mask+0xa5/0xc0 Call Trace: dcn21_calculate_wm+0x47/0xa90 [amdgpu] dcn21_validate_bandwidth_fp+0x15d/0x2b0 [amdgpu] dcn21_validate_bandwidth+0x29/0x40 [amdgpu] dc_validate_global_state+0x3c7/0x4c0 [amdgpu] The warning is emitted due to the additional DC_FP_START/END calls in patch_bounding_box(), which is inlined into dcn21_calculate_wm(), its only caller. Removing the calls brings the code in line with dcn20 and makes the warning disappear. Fixes: 41401ac67791 ("drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amd/display: Old sequence for HUBP blankAurabindo Pillai
New proposed sequence for HUBP blanking causes regressions where the hardware would fail to enter blank which triggers an assert in the new sequence. This change brings back the old sequence. Fixes: 985faf2c4ecb60 ("drm/amd/display: New sequence for HUBP blank") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amd/display: Copy over soc values before bounding box creationSung Lee
[Why] With certain fclock overclocks, state 1 may be chosen as the closest clock level. This may result in this state being empty if not populated beforehand, resulting in black screens and screen corruption. [How] Copy over all soc states to clock_limits before bounding box creation to avoid any cases with empty states. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amd/display: Populate dcn2.1 bounding box before state duplicationSung Lee
[Why] If system is overclocked, only 1 bounding box state will be sent by SMU. This results in an empty state being copied for DML calculations causing black screens and corruption. [How] Fully populate bounding box before duplicating last state. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()Jan Kokemüller
dcn21_validate_bandwidth() calls functions that use floating point math. On my machine this sometimes results in simd exceptions when there are other FPU users such as KVM virtual machines running. The screen freezes completely in this case. Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the problem. This mirrors the approach used for dcn20_validate_bandwidth. Tested on a AMD Ryzen 7 PRO 4750U (Renoir). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987 Signed-off-by: Jan Kokemüller <jan.kokemueller@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-09drm/amd/display: Initialize dmub_rb_cmd unions to 0Wyatt Wood
[Why] Since dmub_rb_cmds are not initialized to 0, the header is filled with invalid data. This is causing issues on the fw side. [How] Initialize dmub_rb_cmd unions to 0. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Add more Clock Sources to DCN2.1Sung Lee
[WHY] When enabling HDMI on ComboPHY, there are not enough clock sources to complete display detection. [HOW] Initialize more clock sources. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-20drm/amd/display: Update dram_clock_change_latency for DCN2.1Jake Wang
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display: New sequence for HUBP blankWesley Chalmers
[WHY] DCN30 has a bug where blanking HUBP blocks pstate allow unless HUBP_DISABLE is toggled afterwards. [HOW] Create a HW sequence for blanking HUBP. 1. Wait for enter VBLANK 2. Set HUBP_BLANK 3. Make sure HUBP_IN_BLANK = 1 4. Toggle HUBP_DISABLE on and off to perform soft reset All existing calls to hubp->funcs->set_blank should be replaced with this new sequence. In wait_for_mpcc_disconnect, only blank the pipe being disconnected, and leave all other pipes unmodified. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amdgpu/display: drop DCN support for aarch64Alex Deucher
From Ard: "Simply disabling -mgeneral-regs-only left and right is risky, given that the standard AArch64 ABI permits the use of FP/SIMD registers anywhere, and GCC is known to use SIMD registers for spilling, and may invent other uses of the FP/SIMD register file that have nothing to do with the floating point code in question. Note that putting kernel_neon_begin() and kernel_neon_end() around the code that does use FP is not sufficient here, the problem is in all the other code that may be emitted with references to SIMD registers in it. So the only way to do this properly is to put all floating point code in a separate compilation unit, and only compile that unit with -mgeneral-regs-only." Disable support until the code can be properly refactored to support this properly on aarch64. Acked-by: Will Deacon <will@kernel.org> Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-15drm/amd/display: Adding prototype for dccg21_update_dpp_dto()Souptick Joarder
Kernel test robot throws below warning -> drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_dccg.c:46:6: warning: no previous prototype for 'dccg21_update_dpp_dto' [-Wmissing-prototypes] Adding prototype for dccg21_update_dpp_dto(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/display: Revert DCN2.1 dram_clock_change_latency updateMichael Strauss
[Why] New value breaks VSR on high refresh panels, reverting until a fix is developed Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/display: Update dram_clock_change_latency for DCN2.1Sung Lee
[WHY] dram clock change latencies get updated using ddr4 latency table, but does that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: To update backlight restore mechanismCamille Cho
[Why] Cached backlight is never being updated since panel_cntl specific registers were moved from abm to panel_cntl. [How] Update cached backlight in set_abm_immediate_disable as what we used to do. Also, update the priority of backlight restore mechanism so that cached backlight has the highest priority since it is always correct. Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Populate hostvm parameter before DML calculationSung Lee
[Why] If the system does not have hostvm enabled, disabling it for DML validation will allow more modes to pass at lower voltage levels. [How] When initializing HostVM save state to hubbub and read back when populating DML pipes from context. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: cap dpp dto phase not more than modulo.Yongqiang Sun
[Why] 4K monitor shows corruption if dpp dto phase is larger than modulo. [How] cap phase value never larger than modulo. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: update dpp dto phase and modulo.Yongqiang Sun
[Why & How] Program modulo with ref dpp clk Mhz/10. Program phase with pipe dpp clk Mhz /10. DMUB FW could use these value to determine optimization clk for PSR power saving. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: force use sRGB for video TF is sRGB or BT709Jing Zhou
[Why] When mpo enabled, video comes is 709. Desktop use sRGB. So color change easily noticeable especially when switch between mpo/non-mpo. [How] Force use sRGB for video TF is sRGB or BT709. DCN1/DCN2 use predefined type with YUV. DCN3 use distributed points type with YUV. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: Prevent freesync power optimization during validationIsabel Zhang
[Why] Due to the freesync power optimization increasing vtotal, the driver believes that MPO is supported. MPO is turned on. Freesync then exits, MPO can no longer be supported and immediate flip fails. This causes corruption on the panel. [How] Avoid the freesync optimization when doing validation so in the case freesync exits, driver can still support the configuration. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-10drm/amd/display: Add fallback to prefetch mode 1 if 0 failsIsabel Zhang
[Why] In some cases, prefetch mode 0 is unsupported but prefetch 1 is supported. Due to previous change always forcing prefetch mode to 0, we are failing bandwidth validation in cases where we should not. [How] By default try prefetch mode 0 but in the case validation fails, attempt to do prefetch mode 1 to see if it is supported. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02drm/amd/display: Blank HUBP during pixel data blank for DCN30 v2Joshua Aberback
[Why] Prior commit "Blank HUBP during pixel data blank for DCN30" missed the call to set_disp_pattern_generator from set_crtc_test_pattern, which re-exposed the issue for which we initially blocked active-only p-state switching. [How] - remove dcn30_blank_pixel_data, set dcn30 back to dcn20 version - new hwss funciton set_disp_pattern_generator - dcn20 version just calls opp_set_disp_pattern_generator - dcn30 version implements the HUBP blank Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-02drm/amd/display: Force prefetch mode to 0Isabel Zhang
[Why] On APU should be always using prefetch mode 0. Currently, sometimes prefetch mode 1 is being used causing system to hard hang due to minTTUVBlank being too low. [How] Any ASIC running DCN21 will by default allow self refresh and mclk switch. This sets both min and max prefetch mode to 0 by default. Signed-off-by: Isabel Zhang <isabel.zhang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Update GSL state if leaving immediate flipAlvin Lee
[Why] We should leave GSL if we're not doing immediate flip no matter if we're doing pipe split or not [How] Check for updating GSL state whenever we're not doing immediate flip v2: Squash in build fix (Alex) Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Source minimum HBlank supportAshley Thomas
[Why] Some sink devices wish to have access to the minimum HBlank supported by the ASIC. [How] Make the ASIC minimum HBlank available in Source Device information address 0x340. Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: enable odm + full screen mpo on dcn21Dmytro Laktyushkin
[WHY & HOW] Enable ODM Combine + Fullscreen MPO on DCN2.1 For lower power consumption in video use cases. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: add dcn21 bw validationDmytro Laktyushkin
[Why&How] Create a separate dcn21_fast_validate_bw function for dcn21. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Add Bounding Box State for Low DF PState but High Voltage StateSung Lee
[WHY] DF PState and Voltage State are coupled such that one cannot be raised without raising the other. This uses more power than is necessary in high bandwidth scenarios. [HOW] Add logic to create a new bounding box state that allows for DF PState to be low while Voltage State is high. Watermarks vlevel calculation logic was also udpated to assume state 1 contains the new optimized state. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Hardcode 45W Bounding Box for DCN2.1 DiagsSung Lee
[WHY] Currently construction of clock limits gets skipped for diags. This logic would be useful to get tested in diags. [HOW] Copy existing states to clk_table such that update_bw_bounding_box logic gets used to fill the table. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add i2c speed arbitration for dc_i2c and hdcp_i2cCharlene Liu
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] Slow down the HW i2c speed when used by HW i2c. This request: each acquired_i2c_engine setup the i2c speed needed and sets the I2c engine for HDCP use at release_engine. This covers SW using HW i2c engine and HDCP using HW i2c engine. for dmcu using HW i2c engine, needs add similar logic in dmcu fw. Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Block ABM in case of eDP ODMYongqiang Sun
[Why] enable ODM on eDP panel with ABM will result in color difference on the panel due to only one ABM module to set one pipe. [How] Block ABM in case of ODM enabled on eDP. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amd/display: eDP intermittent black screen during PnPPeikang Zhang
[Why] We dont's turn off backlight before power off eDP (VDD), which is a violation of eDP specs. [How] Power off eDP backlight before power off eDP Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-15drm/amd/display: Triplebuffering should not be used by defaultAric Cyr
Disable triplebuffering by default. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-17drm/amd/display: Screen corruption on dual displays (DP+USB-C)Qingqing Zhuo
[why] Current pipe merge and split logic only supports cases where new dc_state is allocated and relies on dc->current_state to gather information from previous dc_state. Calls to validate_bandwidth on UPDATE_TYPE_MED would cause an issue because there is no new dc_state allocated, and data in dc->current_state would be overwritten during pipe merge. [how] Only allow validate_bandwidth when new dc_state space is created. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: add DCN support for aarch64Daniel Kolesa
This adds ARM64 support into the DCN. This mainly enables support for Navi graphics cards. The dcn10 changes haven't been tested, since I don't have the relevant hardware available, but there is no way to conditionally disable them, so I've done them anyway. Signed-off-by: Daniel Kolesa <daniel@octaforge.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: Disconnect pipe separetely when disable pipe splitAlvin Lee
[Why] When changing pixel formats for HDR (e.g. ARGB -> FP16) there are configurations that change from 2 pipes to 1 pipe. In these cases, it seems that disconnecting MPCC and doing a surface update at the same time(after unlocking) causes some registers to be updated slightly faster than others after unlocking (e.g. if the pixel format is updated to FP16 before the new surface address is programmed, we get corruption on the screen because the pixel formats aren't matching). We separate disconnecting MPCC from the rest of the pipe programming sequence to prevent this. [How] Move MPCC disconnect into separate operation than the rest of the pipe programming. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: Revert regressionAlvin Lee
[Why] Caused pipe split regression Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Constify dcn21_res_pool_funcsRikard Falkeborn
The only usage of dcn21_res_pool_funcs is to assign its address to a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-04drm/amd/display: Separate pipe disconnect from rest of progrmamingAlvin Lee
[Why] When changing pixel formats for HDR (e.g. ARGB -> FP16) there are configurations that change from 2 pipes to 1 pipe. In these cases, it seems that disconnecting MPCC and doing a surface update at the same time(after unlocking) causes some registers to be updated slightly faster than others after unlocking (e.g. if the pixel format is updated to FP16 before the new surface address is programmed, we get corruption on the screen because the pixel formats aren't matching). We separate disconnecting MPCC from the rest of the pipe programming sequence to prevent this. [How] Move MPCC disconnect into separate operation than the rest of the pipe programming. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-30drm/amd/display: Allow asic specific FSFT timing optimizationReza Amini
[Why] Each asic can optimize best based on its capabilities [How] Optimizing timing for a new pixel clock Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: interface to obtain minimum plane size capsIgor Kravchenko
[Why] Implement an interface to obtain plane size caps [How] Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 06:13:16 +0000