summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dcn10
AgeCommit message (Collapse)Author
2019-10-03drm/amd/display: Revert fixup DPP programming sequenceWesley Chalmers
[WHY] This change was made because DTO programming was double-buffered, which is itself an issue. After deactivating the DTO double buffer, this change becomes unnecessary. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-17drm/amd/display: Fix HUBP secondary viewport programmingIlya Bakoulin
[Why] Secondary viewport dimension/position registers are not programmed, which can cause issues in some stereo configurations. [How] Add register definitions and register programming. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Add missing surface address registersIlya Bakoulin
[Why] - Need to add missing surface address register definitions. - RGBE+A does not work in a stereo configuration because surface addresses are no programmed correctly. [How] Added the register definitions and surface address programming. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-13drm/amd/display: Subsample mode suboptimal for YCbCr4:2:2Krunoslav Kovac
[Why&How] Driver defaults to 1-tap subsample mode for 4:2:2. DCE11.2 added 3-tap. The policy is: DCE8-DCE11 - change to 2-tap, it's better than 1-tap. DCE11.2+ - use 3-tap Note that 4:2:0 was added in DCE11.2 and already uses 3-tap always. Note 2 is that DCE not covered on Linux, only DCN+ Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-29drm/amd/display: Add Renoir hubbub registers listBhawanpreet Lakha
These are the registers used to program the hubbub hw. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: flicking observed while installing driver on Navi10 CFhersen wu
[WHY] value of dchub_ref_clock is decided by dchubbub global timer settings which is programmed by vbios command table disp_init. for multi-GPU case, vbios is posted only for primary GPU. without vbios posted for the secondary GPU, value of dchub_ref_clock is not set properly. this value will affect dcn bandwidth calcuation and cause underflow. user will see screen flicking during driver installation for dual GPU case. [HOW] dc init_hw always call vbios command table disp_init to make sure dchubbub global timer is configured and enable. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Expose OTG_V_TOTAL_MID for HW DiagsBayan Zabihiyan
[Why] Existing HW Features, HW Diags test requested that the registers be exposed. [How] Add V_TOTAL_MID to existing DC structures. Make sure values are passed down throughout DC Add Register definition. Program the additional registers Add additional Logic for V_TOTAL_CONTROL. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: set av_mute in hw_init for HDMICharlene Liu
[Description] OS will reserve HW state in UEFI mode. Driver init_hw reset to RGB which caused HDMI green in YCbCr mode. read HW blank_color based on acc_mode. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Add Logging for Gamma Related informationWyatt Wood
[Why] A recent bug showed that logging would be useful in debugging various gamma issues. [How] Add logging in dc. Fix formatting for easier graphing. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Enable HW rotationJaehyun Chung
[Why] HW rotation is not enabled. Calculations for cursor rotation are wrong for the values passed to set_cursor_position. [How] Swap Src rect and height and vertically mirror surface for the correct surface rotation direction. Cursor position is rotated according to angle. Offset calculations are tweaked for non-rotated cursor hotspot and width/height. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: add Cursor Degamma logic for DCN2Bayan Zabihiyan
[Why] We need to have the ability to to tell us set degamma on the cursor. [How] Pass a flag down to register programming that tells us if the current surface format needs cursor degamma. Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix trigger not generated for freesyncYogesh Mohan Marimuthu
[Why] In newer hardware MANUAL_FLOW_CONTROL is not a trigger bit. Due to this front porch is fixed and in these hardware freesync does not work. [How] Change the programming to generate a pulse so that the event will be triggered, front porch will be cut short and freesync will work. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: cleaned up coding error in init_hwMartin Leung
[why] during a refactor a redundant code that has unknown behaviour was added. [how] removed old bad code Fixes: 8a31820b1218 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot") Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: Add VM page fault handle implementationJaehyun Chung
[How] Allocate memory for default page and program memory block addr into default page addr register. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: add null checks before loggingWyatt Wood
Adding NULL checks to various parameters in log_tf, to avoid nullptr errors Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Nikola Cornij <Nikola.Cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: fix audio endpoint not getting disabled issueSu Sung Chung
[Why] Disable_audio_stream gets enum option as a paramenter which will decide if we free acquired resources or not. However checks for the option is guarded by the other condition which check if audio stream is getting diabled more than once. With both conditions combined, if we attempt to disable audio stream twice in a row, first with keep and second with free as an option, we will never free any resources, which will make system think there is audio endpoint connected even after we plug out the device [How] Get rid of option as parameter to disable_audio_stream and move the part of the code that free acquired resources to outside where to keep or to free resources is actually determined Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: re structure odm to allow 4 to 1 supportDmytro Laktyushkin
Currently odm is handled using top_bottom pipe by special casing the differing opps to differentiate from mpc combine. Since top/bottom pipe list was made to track mpc muxing this creates difficulties in adding a 4 pipe odm case support. Rather than continue using mpc combine list, this change reworks odm to use it's own linked list to keep track of odm combine pipes. This also opens up options for using mpo with odm, if a practical use case is ever found. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Enable MPO with pre-blend color processing (RGB)Michael Strauss
[Why] DCN10 performs color processing before MPC combination, causes color shift in RGB colorspaces when positive brightness offset is applied However, YCbCr is still unfixed and remains disabled [How] Add layerIndex to dc_plane_state and dc_plane_info structs Re-enable MPO when brightness is adjusted and colorspace is not YCbCr Set rear plane's brightness offset to 0 when front plane visible Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: audio cannot switch to internal when display turns offyanyan kang
[why] disable_az_endpoint has been skipped because dc->debug.az_endpoint_mute_only = true. [how] set dc->debug.az_endpoint_mute_only false when PPLIB’s PME notification function pointer is not NULL at the dcn10_resource construct function,because right now SMU/PPLIB and DAL all have the AZ D3 force PME notification implemented. AZ D3 should work. Signed-off-by: yanyan kang <Yanyan.Kang@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Add Logging for Gamma Related information (2/2)Wyatt Wood
[Why] A recent bug showed that logging would be useful in debugging various gamma issues. [How] Add logging in dc. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Add enum for H-timing divider modeQingqing Zhuo
Add h_timing_div_mode enum to better reflect possible register values. Replace previously programmed values with enum Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Check if set_blank_data_double_buffer exists before callVitaly Prosyak
Not all ASIC types have this function implemented - check before calling. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Julian Parkin <jparkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Enable type C hotplugEric Yang
[Why and How] We want to change where timing is done for alt mode. Some of the commented out #ifs are needed for DCN20 so we enable them for that case. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: HUBP/HUBBUB register programming fixesIlya Bakoulin
[Why] - Need to change interface function signature / add an enum to reflect the available register field values [How] - Add a new enum and modify existing functions to use it instead of bool Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: update optc odm interface for more than 2 oppsDmytro Laktyushkin
Current optc odm interface only accepts 2 opps, we need to expand this to allow 4 to 1 odm combine. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Remove duplicate interface for programming FBJulian Parkin
[Why] There are currently two interfaces for exactly the same thing: hupb_update_dchub in hupb and update_dchub in hubbub. The hubbub version is currently unused past dcn10, largely because the call from the dcn10 hardware sequencer does not call through the interface, so the hupb interface was used instead. This is confusing because of the duplicate code, the unused functions, and the fact that more that one block currently owns this set of registers. [How] Remove the hubp interface entirely, as well as the register declarations that are not longer needed because of this. Change the call site to always call the hubbub version through the interface. Fix the update_dchub function in dcn20_hubbub.c to program the correct registers for dcn20. Signed-off-by: Julian Parkin <julian.parkin@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: enabling seamless boot sequence for dcn2Martin Leung
[Why] Seamless boot (building SW state inheriting BIOS-initialized timing) was enabled on DCN2, including fixes [How] Includes fixes for MPC, DPPCLK, and DIG FE mapping/OTG source select/ Pixel clock. This is part 2 of 2 for seamless boot NV10 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: fix dcn-specific clk_mgr init_clocksMartin Leung
[Why] underflow seen on certain monitor setups caused by making dcnxx_init_hw generic [How] by moving dcn20_init_hw into dcn10, we added a dcn-specific clk_mgr init (dc->clk_mgr->funcs->init_clocks()). Thus, put old clk_mgr memset in an else statement so both memsets don't get set Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Make init_hw and init_pipes generic for seamless bootMartin Leung
[Why] For seamless boot the init_hw sequence must be split into actual hardware vs pipes, in order to defer pipe initialization to set mode and skip of pipe-destructive sequences [How] made dcn10_init_hw and dcn10_init_pipes generic for future dcns to inherit deleted dcn20 specific versions. This is part 1 of a 2 partimplementation of seamless boot Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: fixup DPP programming sequenceJun Lei
[why] DC does not correct account for the fact that DPP DTO is double buffered while DPP ref is not. This means that when DPP ref clock is lowered when it's "safe to lower", the DPP blocks that need an increased divider will temporarily have actual DPP clock drop below minimum while DTO double buffering takes effect. This results in temporary underflow. [how] To fix this, DPP clock cannot be programmed atomically, but rather be broken up into the DTO and the ref. Each has a separate "safe to lower" logic. When doing "prepare" the ref and dividers may only increase. When doing "optimize", both may decrease. It is guaranteed that we won't exceed max DPP clock because we do not use dividers larger than 1. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: fix issue where 252-255 values are clippedAnthony Koo
[Why] When endpoint is at the boundary of a region, such as at 2^0=1 we find that the last segment has a sharp slope and some points are clipped at the top. [How] If end point is 1, which is exactly at the 2^0 region boundary, we need to program an additional region beyond this point. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: reset hdmi tmds rate and data scramble on pipe resetWenjing Liu
[why] hdmi data scramble and tmds rate is not reset during pipe reset. [how] reset hdmi tmds rate and data scramble on pipe reset Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: reset drr programming on pipe resetWenjing Liu
[why] drr is still enabled after driver is unloaded causing black screen [how] disable drr during pipe reset. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-12drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_maskChristophe JAILLET
This should be 'dce_audio_mask', not 'dce_aduio_mask'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add dcc programming for dual planeDmytro Laktyushkin
Add dual plane dcc programming support for surfaces. Removes unions from plane size and dcc params as they serve no practical purpose only making our code more convoluted. This results in easy dual plane dcc and surface size programming. Temporary diags_dm code is used to handle the interface change without breaking functionality as a diags change needs to be applied after this one. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: add set and get clock for testing purposesCharlene Liu
add dc_set_clock add dc_get_clock this is for testing and diagnostics to get/set DPPCLK and DISPCLK. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: allocate 4 ddc engines for RV2Derek Lai
[Why] Driver will create 0, 1, and 2 ddc engines for RV2, but some platforms used 0, 1, and 3. [How] Still allocate 4 ddc engines for RV2. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Hook up calls to do stereo mux and dig programming to ↵Murton Liu
stereo control interface [Why] Implementation of stereo mux register is complete, but unused. Need to call functions to write relevant configs. [How] Add function to write stereo config for enable/disable case and call in stereo control interface. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Fixes for some MPO casesIlya Bakoulin
[Why] Alpha could be improperly applied (only affecting half the frame) for some source pixel formats. [How] Change how alpha is enabled in MPC/DPP LB and change the bottom plane blend mode in MPC. Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Add DIG_CLOCK_PATTERN registerNevenko Stupar
Add this register for future use Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: put back front end initialization sequenceEric Yang
[Why] Seamless boot optimization removed proper front end power off sequence. In driver disable enable case, this causes driver to power gate hubp and dpp while there is still memory fetching going on, this can cause invalid memory requests to be generated which will hang data fabric. [How] Put back proper front end power off sequence Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Do not fill Null packet in the blank periodCharlene Liu
[Description] Do not fill Null packet in the blank period for new packet gen This is based on HW IP team recommended default setting change. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: refactor dump_clk_registersSu Sung Chung
[why] for 2 purposes: 1. get raw register value dumped on the log, which will make it easier to talk to other team who only knows about the register 2. enable other HW to be able to use the same interface as raven to log clock register data Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display:Use Pixel clock in 100Hz units for HDMI Audio wall clock DTONevenko Stupar
[Why] -Pass and use pixel clock in 100 Hz to Audio for HDMI audio DTO for Audio wall clock programming so audio DTO gets increased precision for timings with /1001 factor. -For HDMI TMDS for N and CTS ACR tables are based on 10 KHz units, these does not need to be modified as N and CTS values are still valid using current tables. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Clock does not lower in UpdateplanesMurton Liu
[why] We reset the optimized_required in atomic_plane_disable flag immediately after it is set in atomic_plane_disconnect, causing us to never have flag set during next flip in UpdatePlanes. [how] Optimize directly after each time plane is removed. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Split out common HUBP registers and codeCharlene Liu
There are shared regs and code across DCN generations. Pull them out into a shared common location. Also, expose some dcn20 init functions. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25drm/amdgpu/display: drop ifdefs around commentsAlex Deucher
No need to protect the comments. The DCN1_01 config was dopped anyway. Got accidently brought back with the navi merge. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-25Merge branch 'drm-next' into drm-next-5.3Alex Deucher
Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add Underflow Asserts to dcThomas Lim
[Why] For debugging underflow issues it can be useful to have asserts when the underflow initially occurs. [How] Read the underflow status registers after actions that have a high risk of causing underflow and assert that no underflow occurred. If underflow occurred, clear the bit. Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: move vmid determination logic to a moduleDmytro Laktyushkin
Currently vmid is decided internally inside dc. With the introduction of new asics we are required to coordinate vmid use with external components. This change converts vmid logic to a DAL module allowing vmid to be passed in as a parameter to DC. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:29:46 +0000