summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dc.h
AgeCommit message (Collapse)Author
2023-08-30drm/amd/display: Add DCN35 CLK_MGRQingqing Zhuo
[Why & How] Add CLK_MGR handling for DCN35. v2: Drop stale SMU interfaces (Alex) Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Update dc.h for DCN35 supportQingqing Zhuo
[Why & How] Update dc.h for DCN35 usage. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: 3.2.249Martin Leung
This version brings along the following: - DCN315 fixes - DCN31 fixes - DPIA fixes - Dump the pipe topology when it updates - Misc code cleanups - New debugfs interface to query the current ODM combine configuration - ODM fixes - Potential deadlock while waiting for MPC idle fix - Support for windowed MPO ODM Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DPIA Link Encoder Assignment FixMustapha Ghaddar
For DPIA we should have preferred DIG assignment based on DPIA selected as per the ASIC design. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: 3.2.248Aric Cyr
This version brings along following fixes: - Ensure FS is enabled before sending request to DMUB for FS changes - Add check for PMFW hard min request complete - Save addr update in scratch before flip - Fix static screen detection setting - Write flip addr to scratch reg for subvp - set minimum of VBlank_nom - Correct unit conversion for vstartup - Roll back unit correction - Enable runtime register offset init for DCN32 DMUB - Refactor edp power control - PQ regamma end point - PQ tail accuracy - Expose mall capability Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Refactor edp power controlIan Chen
[Why & How] To organize the edp power control a bit: 1. add flag in dc_link to indicate dc to skip all implicit eDP power control. 2. add edp_set_panel_power link service for DM to call. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Promote DAL to 3.2.247Aric Cyr
This version brings along following fixes: - Improve power saving feature - Clean up for code clarity - Fix crashing bug - Fix pipe allocation for older ASIC - Fix for gamut remap - Fix 8K 60Hz display in test cases - Fix bug in clock gating - Improve DP2 compliance Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-15drm/amd/display: Support Compliance Test Pattern Generation with DP2 RetimerMichael Strauss
[WHY] Certain retimer requires workarounds in order to correctly output test patterns. [HOW] Add vendor-specific aux sequences to program retimer's TX and pattern generator when specific compliance test patterns are requested by sink. Note: SQ128 w/a in DPMF mode only works in one flip orientation currently Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Promote DAL to 3.2.246Martin Leung
This version brings along following fixes: - Fix a regression in blank pixel data caused by coding mistake - Fix a bug when searching for insert_above_mpcc - Update add plane to context logic with a new algorithm - Adjust visual confirm dpp height offset to be 1/240 of v addressable - Add interface to enable DPIA trace - Support plane clip with zero recout size - Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314 - Make mpc32 functions available to future DCNs - Change HDCP update sequence for DM Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Martin Leung <martin.leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add Freesync Panel DM codeBhawanpreet Lakha
We need certain conditions for replay to be enabled, so create an interface in DM to enable/disable replay. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Promote DC to 2.3.245Aric Cyr
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Implement interface for notify cursor support changeAlvin Lee
[Description] Add new interface for notifying OS of cursor support changes Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07drm/amd/display: Add structs for Freesync Panel ReplayBhawanpreet Lakha
In some instances, the GPU is transmitting repeated frame to the sink without any updates or changes in the content. These repeat transmission are wasteful, resulting in power draw in different aspects of the system 1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic prevents power down of parts of this HW path. 2. GPU is transmitting pixel data to the display through the main link of the DisplayPort interface. This prevents power down of both the Source transmitter (TX) and the Sink receiver (RX)  The concepts of utilizing replay is similar to PSR, but there is a benefit of: Source and Sink remaining synchronized which allows for - lower latency when switching from replay to live frames - enable the possibility of more use cases - easy control of the sink's refresh rate during replay Due to Source and Sink remaining timing synchronized, Replay can be activated in more UI scenarios. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: 3.2.244Aric Cyr
This version brings along following fixes: - Fix underflow issue on 175hz timing - Add interface to modify DMUB panel power options - Remove check for default eDP panel_mode - Add new sequence for 4-lane HBR3 on vendor specific retimers - Update DPG test pattern programming - Correct unit conversion for vstartup - Exit idle optimizations before attempt to access PHY - Refactor recout calculation with a more generic formula - Read down-spread percentage from lut to adjust dprefclk. - Don't apply FIFO resync W/A if rdivider = 0 - Prevent invalid pipe connections - Rearrange dmub_cmd defs order - Add VESA SCR case for default aux backlight - Guard DCN31 PHYD32CLK logic against chip family - Correct grammar mistakes Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Promote DAL to 3.2.243Aric Cyr
This version brings along following fixes: - Update 128b/132b downspread factor to 0.3% - Add helpers to get DMUB FW boot options - Initialize necessary uninitialized variables - Add stream overhead in BW calculations for 128b/132b - Add link encoding to timing BW calculation parameters - Prevent vtotal from being set to 0 - Fix race condition when turning off an output alone - Keep PHY active for DP displays on DCN31 - Fix ASIC check in aux timeout workaround - ABM pause toggle - Add missing triggers for full updates - Disable MPC split by default on special asic - Add additional refresh rate conditions for SubVP cases - Fix DP2 link training failure with RCO - Reenable all root clock gating options - Cache backlight_millinits in link structure and setting brightness accordingly - Refine to decide the verified link setting - Update SW cursor fallback for subvp high refresh Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: ABM pause toggleReza Amini
[why] Allow ABM states to be transferred across display adapters for smooth display transitions. [how] We call DMUB to pause and get ABM states. We transfer data to other gpu, and deliver data and ask ABM to un-pause. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Reza Amini <reza.amini@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add link encoding to timing BW calculation parametersGeorge Shen
[Why] There certain cases where the timing BW is dependent on the type of link encoding in use. Thus to calculate the correct BW required for a given timing, the link encoding should be added as a parameter. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add stream overhead in BW calculations for 128b/132bGeorge Shen
[Why] Current BW calculations do not account for the additional padding added for uncompressed pixel-to-symbol packing. This results in X.Y being too low for 128b/132b SST streams in certain scenarios. If X.Y is too low, end user can observe image corruption. [How] Add function to calculate stream overhead to timing BW calculation for 128b/132b SST cases. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Promote DAL to 3.2.242Aric Cyr
This version brings along following fixes: - Setup stream encoder before link enable for TMDS - Use is_dig_enable function instead of dcn10 hardcode - Re-add aux intercept disable delay generically for 2+ LTTPRs - Add polling method to handle MST reply packet - Remove unused function - Improve the include of header file - Add missing static - Hardcode vco_freq for dcn316 - Reduce stack size - Skip enabling DMCUB when using emulation - Check TG is non-null before checking if enabled - Update scaler recout data for visual confirm - Skip querying caps when DMCUB emulation is in use Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Cache backlight_millinits in link structure and setting ↵Nicholas Susanto
brightness accordingly [Why] Need to save the cached backlight level so that display lights up using appropriate brightness level instead of the default brightness when waking up from s0i3. [How] Adding a backlight level cache in link structure. Also instead on calling set_default_brightness_aux, check if cached values exists. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Re-add aux intercept disable delay generically for 2+ LTTPRsMichael Strauss
[WHY] Issue not display generic, required for multiple 2+ LTTPR link configurations. [HOW] Revert monitor patch change and remove delay for single LTTPR case Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-12drm/amd/display: dc.h: eliminate kernel-doc warningsRandy Dunlap
Quash 175 kernel-doc warnings in dc.h by unmarking 2 struct comments as containing kernel-doc notation and by spelling one struct field correctly in a kernel-doc comment. Fixes: 1682bd1a6b5f ("drm/amd/display: Expand kernel doc for DC") Fixes: ea76895ffab1 ("drm/amd/display: Document pipe split policy") Fixes: f6ae69f49fcf ("drm/amd/display: Include surface of unaffected streams") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: dri-devel@lists.freedesktop.org
2023-06-30drm/amd/display: 3.2.241Aric Cyr
This version brings along the following: - Improve debugging mechanism for Gaming FAMS - Add monitor specific edid quirks - Fixes for Phantom pipe - Fixes for Shapper LUT - Clean up asserts Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Create debugging mechanism for Gaming FAMSGianna Binder
[WHY] To enable FAMS even during gaming sessions. [HOW] By leveraging a new dc.debug parameter. Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Gianna Binder <gianna.binder@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Limit new fast update path to addr and gamma / colorAlvin Lee
[Description] - We want to limit the new fast update path to address and gamma updates only. - Add a check in dc_update_planes_and_stream to only take the new fast update path if we only have the specific fast updates defined. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Work around bad DPCD state on link lossIlya Bakoulin
[Why] This display doesn't properly indicate link loss through DPCD bits such as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE, which all remain set. In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases. For these reasons, we can miss re-training the link, since we don't properly detect link loss with this display. [Why] Add display-specific workaround to read DPCD204h, so that we can detect link loss based on 128b132b-specific status bits in this register. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: 3.2.240Aric Cyr
This version brings along the following: - DCN314 fixes - DCN32x fixes - New fast update sequence enablement - DC mode clock switching enablement for DCN32x - DP link loss fix - New debugfs entry to set MST link settings Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-23drm/amd/display: Enable dc mode clock switching for DCN32xAlvin Lee
- DC mode clock switch interface was previously only executed for DCN303. Enable it for DCN32x so that the interface is called correctly - Assign function pointers for DCN32x that are used in the dc mode interface - Update the dc mode interface to work generically for each ASIC - In update_clocks, make sure to consider softmax if we're in DC mode Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: 3.2.239Aric Cyr
This version brings along following fixes: - Improvement on eDP - PSR bug fixes - SubVP bug fixes - Improvements on pipe handling to address potential issues - Freesync bug fix - DPIA bug fix - Fix multi-display issues Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Limit Minimum FreeSync Refresh RateAustin Zheng
Why: Some EDIDs report a minimum refresh rate lower than what HW can support How: Add a check to calculate minimum supported refresh rate with current timing and use that as the minimum if a lower one is passed in Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Promote DAL to 3.2.238Aric Cyr
Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Add DP2 MetricsAustin Zheng
Why: Log DP2 data to be used for debugging purposes How: Check the reported link rate of the DP connection and translate it to the DP version. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Filter out AC mode frequencies on DC mode systemsAustin Zheng
Why: Limit maximum clock speeds to DC mode limits for DC mode systems How: Store DC mode limits when individual clocks are initialized and cap the values when building the clock table Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Refactor fast update to use new HWSS build sequenceAlvin Lee
[Description] - Refactor HW sequencer to use a build / execute sequence - Also move gamma updates to become fast v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'") Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: 3.2.237Aric Cyr
This version brings along following fixes: - Improve the message printed - Disable dcn315 pixel rate crb when scaling - Update SR watermarks for DCN314 - Fix dcn315 pixel rate crb scaling check - Reset CRTC State Before Restore from S2idle - Have Payload Properly Created After Resume - Trigger DIO FIFO resync on commit streams - Revert vblank change that causes null pointer crash - Fix possible underflow for displays with large vblank - Apply 60us prefetch for DCFCLK <= 300Mhz - Update correct DCN314 register header Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix DMUB debugging print issueCruise Hung
[Why] The DMUB diagnostic data was not printed out correctly. [How] Print the DMUB diagnostic data line by line. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: 3.2.236Aric Cyr
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add visual confirm color support for MCLK switchLeo (Hanghong) Ma
[Why && How] We would like to have visual confirm color support for MCLK switch. 1. Set visual confirm color to yellow: Vblank MCLK switch. 2. Set visual confirm color to cyan: FPO + Vblank MCLK switch. 3. Set visual confirm color to pink: Vactive MCLK switch. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Update vactive margin and max vblank for fpo + vactiveAlvin Lee
[Description] - Some 1920x1080@60hz displays have VBLANK time > 600us which we still want to accept for FPO + Vactive configs based on testing - Increase max VBLANK time to 1000us to allow these configs for FPO + Vactive - Increase minimum vactive switch margin for FPO + Vactive to 200us - Based on testing, 1920x1080@120hz can have a switch margin of ~160us which requires significantly longer FPO stretch margin (5ms) which we don't want to accept for now - Also move margins into debug option Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Only skip update for DCFCLK, UCLK, FCLK on overclockAlvin Lee
[Description] - Update clocks is skipped in the GPU overclock sequence - However, we still need to update DISPCLK, DPPCLK, and DTBCLK because the GPU overclock sequence could temporarily disable ODM 2:1 combine because we disable all planes in the sequence Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Promote DAL to 3.2.235Aric Cyr
This version brings along following fixes: - Block SubVP on displays that have pixclk > 1800Mhz - Block SubVP high refresh when VRR active fixed - Enforce 60us prefetch for 200Mhz DCFCLK modes - Check Vactive for VRR active for FPO + Vactive - Add symclk workaround during disable link output - Show the DCN/DCE version in the log - Add additional pstate registers to HW state query Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: 3.2.234Aric Cyr
This version brings along following fixes: - FW Release 0.0.165.0 - Add w/a to disable DP dual mode on certain ports - Revert "Update scaler recout data for visual confirm" - Filter out invalid bits in pipe_fuses - Adding debug option to override Z8 watermark values - Change default Z8 watermark values - Workaround wrong HDR colorimetry with some receivers Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add w/a to disable DP dual mode on certain portsGeorge Shen
[Why] Certain ports on DCN3.2 configs do not properly populate the BIOS info table flag to indicate DP dual mode is unsupported. [How] Add a workaround to disable DP dual mode on the ports with the missing BIOS info table flag. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Adding debug option to override Z8 watermark valuesLeo Chen
[Why & How] Adding debug options to override Z8 watermark values for testing purposes. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Workaround wrong HDR colorimetry with some receiversIlya Bakoulin
[Why] Some scalers do not pick up color space updates unless the DP link is disabled/re-enabled which can result in incorrect/washed out HDR colors in some cases. [How] Call set_dpms_on to disable the link, re-train and re-enable with the updated output color space. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: 3.2.233Aric Cyr
This DC version brings along: - Improvements in the SubVP feature - Keep disable aux-i delay as 0 - Add p-state debugging and improvements - Fix in secure display context creation - add option to use custom backlight caps - Lowering min Z8 residency time - Restore rptr/wptr for DMCUB as workaround - Update FW feature caps struct Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Query GECC enable for SubVP disableAlvin Lee
- We want to disable SubVP if Graphics Error Correction/Correcting Code (GECC) is enabled. - After reading feature caps from DMCUB during init, use the GECC enable/disable info to determine if SubVP can be enabled or not. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Enable SubVP for high refresh rate displaysAlvin Lee
[Description] - Add debug option to enable SubVP for high refresh rate displays - For now limit the enabled modes based on a table in debug options - Currently disabled by default Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: update extended blank for dcn314 onwardsGabe Teeger
[Why] Flickering and underflow was observed when testing extended blank on dcn314. [What] Vstartup is contrainted by vblank_nom, so adjusting it to include non-adjusted vtotal in its calculation during freesync video means that Vstartup is not changed when vtotal changes. This fixed the flickering + underflow. dc_extended_blank_supported function was removed because extended blank is only relevant to when zstate is supported. The increased vtotal during freesync can be passed to dml regardless of whether extended blank is supported or not, so this function is not needed. Updates were made recently in dml to the calculation of min_dst_y_next_start. Dml input for dcn314 will now always use the newer calculation for min_dst_y_next_start. Dml input for older dcn versions remains untouched. The variable optimized_min_dst_y_next_start is replaced everywhere with min_dst_y_next_start, and the updated dml allows min_dst_y_next_start to increase to an optimized value during freesync video, then return to default when freesync is disengaged. Also removed registry key for controlling extended blank feature. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Enable SubVP on PSR panels if single streamAlvin Lee
Enable SubVP on PSR panels now that we have FW support Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 12:22:13 +0000