| Age | Commit message (Collapse) | Author |
|---|
|
Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this
monitor does not work well under some use cases, and is likely
implementation specific bug on the monitor's firmware.
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change causes regression when eDP and external display in mirror
mode. When external display supports low resolution than eDP, use eDP
timing to driver external display may cause corruption on external
display.
This reverts commit e749dd10e5f292061ad63d2b030194bf7d7d452c.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A number of parade TCONs are causing system hangs when utilized with
older DMUB firmware and PSR-SU. Some changes have been introduced into
DMUB firmware to add resilience against these failures.
Don't allow running PSR-SU unless on the newer firmware.
Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().
Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When using debugfs to change MST link settings, we need to wait until
the next stream update to apply the preferred link setting. So, trigger
a hotplug event right after the preferred link setting is applied.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The sequence for collecting down_reply from source perspective should
be:
Request_n->repeat (get partial reply of Request_n->clear message ready
flag to ack DPRX that the message is received) till all partial
replies for Request_n are received->new Request_n+1.
Now there is chance that drm_dp_mst_hpd_irq() will fire new down
request in the tx queue when the down reply is incomplete. Source is
restricted to generate interveleaved message transactions so we should
avoid it.
Also, while assembling partial reply packets, reading out DPCD DOWN_REP
Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
wrapped up as a complete operation for reading out a reply packet.
Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
be risky. e.g. If the reply of the new request has overwritten the
DPRX DOWN_REP Sideband MSG buffer before source writing one to clear
DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
for the new request. Should handle the up request in the same way.
[How]
Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ
event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might
trigger drm_dp_mst_kick_tx() only when there is no on going message
transaction.
Changes since v1:
* Reworked on review comments received
-> Adjust the fix to let driver explicitly kick off new down request
when mst irq event is handled and acked
-> Adjust the commit message
Changes since v2:
* Adjust the commit message
* Adjust the naming of the divided 2 functions and add a new input
parameter "ack".
* Adjust code flow as per review comments.
Changes since v3:
* Update the function description of drm_dp_mst_hpd_irq_handle_event
Changes since v4:
* Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align
the size of esi[]
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't free the memory if we are hitting this as part of suspend.
This way we don't free any memory during suspend; see
amdgpu_bo_free_kernel(). The memory will be freed in the first
non-suspend modeset or when the driver is torn down.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2568
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.
[How]
Disable the PSR before adjusting timing parameters.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] within dc_link_detect, edp edid is read only for the first time
and saved. edid will not be read after the first time read. to run edp
edid read test, need read edp edid for each dc_link_detect. dc->config
flag allow_edp_hotplug_detection could be used for edp edid test.
[How] add debugfs for dc->config.allow_edp_hotplug_detection
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.
[How] do not add non-edid timings for edp.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
CONFIG_DRM_AMD_DC_DCN ifdef
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:48:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.5-2023-06-02:
amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero
ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
UAPI:
- Add new ctx query flag to better handle GPU resets
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3
amd-drm-next-6.5-2023-06-09:
amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class
amdkfd:
- Add debugger support for gdb
radeon:
- Fix possible UAF
drm:
- Add Colorspace functionality
UAPI:
- Add debugger interface for enabling gdb
Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
|
|
This reverts commit 4243c84aa082d8fba70c45f48eb2bb5c19799060.
Enables freesync video by default, since the hang and corruption issue
on eDP panels are now fixed.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <rjordrigo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order to IGT test colorspace we'll want to print
the currently enabled colorspace on a stream. We add
a new debugfs to do so, using the same scheme as
current bpc reporting.
This might also come in handy when debugging display
issues.
v4:
- Fix function doc comment
- Fix sRGB debug print
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Given that we always pass dm_state into here now, this won't ever
trigger anymore.
This is needed for we will always fail mode validation with invalid
clocks or link bandwidth errors.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Look at connector->colorimetry to determine output colorspace.
We don't want to impact current SDR behavior, so
DRM_MODE_COLORIMETRY_DEFAULT preserves current behavior.
Also add support to explicitly set BT601 and BT709.
v4:
- Roll support for BT709 and BT601 into this patch
- Add default case to avoid warnings for unhandled
enum values
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to signal mode_changed to make sure we update the output
colorspace.
v2: No need to call drm_hdmi_avi_infoframe_colorimetry as DC does its
own infoframe packing.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We want compositors to be able to set the output
colorspace on DP and HDMI outputs, based on the
caps reported from the receiver via EDID.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need the connector_state for colorspace and scaling information
and can get it from connector->state.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'dc' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'update_type' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'planes_count' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream_update' not described in 'update_planes_and_stream_adapter'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'array_of_surface_update' not described in 'update_planes_and_stream_adapter'
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is already access to the DPCD from userspace through
`CONFIG_DRM_DP_AUX_CHARDEV`, so it's unnecessary to reinvent the wheel
with a set of extra debugfs nodes specific to amdgpu.
The character device interface behaves more like you would expect in that
you can seek/read/write all from the same file.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At drm suspend sequence, MST dc_sink is removed. When commit cached
MST stream back in drm resume sequence, the MST stream payload is not
properly created and added into the payload table. After resume, topology
change is reprobed by removing existing streams first. That leads to
no payload is found in the existing payload table as below error
"[drm] ERROR No payload for [MST PORT:] found in mst state"
1. In encoder .atomic_check routine, remove check existance of dc_sink
2. Bypass MST by checking existence of MST root port. dc_link_type cannot
differentiate MST port before topology is rediscovered.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During gpu-reset, we toggle vblank irq by calling dc_interrupt_set()
instead of amdgpu_irq_get/put() because we don't want to change the irq
source's refcount. However, we see the warning when vblank irq is enabled
by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put()
after gpu-reset.
[How]
Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by
calling dc_interrupt_set(). Apart from this we call dm_set_vblank()
which uses amdgpu_irq_get/put() to operate vblank irq.
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Change how DC version and hardware version is printed when driver is
loaded.
- Remove exclamation
- Add DC version and hardware version to both success and failure cases
- Add version in between appropriate filler words to make a complete
statement.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When freesync video mode is enabled, switching resolution from native
mode to one of the freesync video compatible modes can trigger continous
artifacts on some eDP panels when running under KDE. The articating can be seen in the
attached bug report.
[How]
Fix this by restricting updates that require full commit by using the same checks
for stream and scaling changes in the the enable pass of dm_update_crtc_state()
along with the check for compatible timings for freesync vide mode.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2162
Fixes: da5e14909776 ("drm/amd/display: Fix hang when skipping modeset")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since, we are only interested in having
drm_edid_override_connector_update(), update the value of
connector->edid_blob_ptr. We don't care about the return value of
drm_edid_override_connector_update() here. So, drop count.
Fixes: 550e5d23f147 ("drm/amd/display: assign edid_blob_ptr with edid from debugfs")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
LoongArch now provides kernel_fpu_begin() and kernel_fpu_end() that are
used like the x86 counterparts in commit 2b3bd32ea3a22ea2d ("LoongArch:
Provide kernel fpu functions"), so we can enable DC_FP on LoongArch for
supporting more DCN devices.
Signed-off-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some times people send their dmesg log for debugging, and one common
task is to check the modesetting line to catch which DCN/DCE we need to
debug. This commit introduces a simple conversion from the DCN/DCE
version to a string shown in the dmesg log.
Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A global function without a header prototype has made it into
linux-next during the merge window:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6339:6: error: no previous prototype for 'amdgpu_dm_connector_funcs_force' [-Werror=missing-prototypes]
Mark the function static instead, as there are no other
callers outside this file.
Fixes: 0ba4a784a145 ("drm/amd/display: implement force function in amdgpu_dm_connector_funcs")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304251640.JClqTim9-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull more drm fixes from Dave Airlie:
"This is the fixes for the last couple of weeks for i915 and last 3
weeks for amdgpu, lots of them but pretty scattered around and all
pretty small.
amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
i915:
- skl pipe source size check
- mtl transcoder mask fix
- DSI power on sequence fix
- GuC versioning corner case fix"
* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
drm/amdgpu: drop redundant sched job cleanup when cs is aborted
drm/amd/display: filter out invalid bits in pipe_fuses
drm/amd/display: Change default Z8 watermark values
drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
drm/amdgpu: add a missing lock for AMDGPU_SCHED
drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
drm/amdgpu: Enable doorbell selfring after resize FB BAR
drm/amdgpu: Use the default reset when loading or reloading the driver
drm/amdgpu: Fix mode2 reset for sienna cichlid
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
drm/i915/guc: Actually return an error if GuC version range check fails
drm/amd/display: Lowering min Z8 residency time
drm/amd/display: fix flickering caused by S/G mode
drm/amd/display: Set min_width and min_height capability for DCN30
drm/amd/display: Isolate remaining FPU code in DCN32
drm/amd/display: Update bounding box values for DCN321
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
...
|
|
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Since the variable fpu_recursion_depth is per-CPU type, it has one copy
on each CPU, thread migration causes data consistency issue, then the
call trace shows up. And preemption disabling can't prevent migration.
[how]
Disable migration to ensure consistency of fpu_recursion_depth.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
Remove incorrect early return in a device specific fifo reset workaround
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.
Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Fixes: 82986fd631fa ("drm/amd/display: save restore hdcp state when display is unplugged from mst hub")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2444
Reported-by: Niklāvs Koļesņikovs <89q1r14hd@relay.firefox.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
when amdgpu_dm_update_connector_after_detect is called
two times successively with valid sink, memory allocated of
aconnector->timing_requested for the first call is not free.
this causes memeleak.
[How]
allocate memory only when aconnector->timing_requested
is null.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
|
|
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
|
|
This reverts commit 80c6d6804f31451848a3956a70c2bcb1f07cfcb0.
The orignal commit was intended as a workaround to prevent underflow and
flickering when using one normal monitor and the other high refresh rate
monitor (> 120Hz).
This patch is being reverted in favour of a software solution to enable
SubVP+DRR
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
We need to store CRTC information in secure_display_ctx, so postpone
the call to amdgpu_dm_crtc_secure_display_create_contexts() until we
initialize all CRTCs.
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When userspace (IGT) inserts EDID with audio data (ELD), EDID
is not updated.
[How]
Implements force function (amdgpu_dm_connector_funcs_force) in
amdgpu_dm_connector_funcs to create emulated sink and to handle
EDID.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenchieh Chien <wenchieh.chien@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] implementation change of drm_edid_override_set since linux
kernel 6.1, edid from debugfs is saved into connector->edid_override
immediatey, not saved to connector->edid_blob_ptr at the same time.
[How] call new drm_edid function drm_connector_update_edid_property
to assign connector->edid_blob_ptr with override edid from debugfs.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Merge ACPI bus type driver changes, ACPI backlight driver updates and a
series of cleanups related to of.h for 6.4-rc1:
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
* acpi-bus:
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
* acpi-video:
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
* acpi-misc:
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
|
|
Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.
During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.
However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.
In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.
The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.
[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().
v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
if it is in gpu-reset.
v3:
- Improve commit message and code comments.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
After gpu-reset, sometimes the driver fails to enable vblank irq,
causing flip_done timed out and the desktop freezed.
During gpu-reset, we disable and enable vblank irq in dm_suspend() and
dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check
irqs' refcount and decide to enable or disable the irqs again.
However, we have 2 sets of API for controling vblank irq, one is
dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has
its own refcount and flag to store the state of vblank irq, and they
are not synchronized.
In drm we use the first API to control vblank irq but in
amdgpu_irq_gpu_reset_resume_helper() we use the second set of API.
The failure happens when vblank irq was enabled by dm_vblank_get()
before gpu-reset, we have vblank->enabled true. However, during
gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state
checked from amdgpu_irq_update() is DISABLED. So finally it disables
vblank irq again. After gpu-reset, if there is a cursor plane commit,
the driver will try to enable vblank irq by calling drm_vblank_enable(),
but the vblank->enabled is still true, so it fails to turn on vblank
irq and causes flip_done can't be completed in vblank irq handler and
desktop become freezed.
[How]
Combining the 2 vblank control APIs by letting drm's API finally calls
amdgpu_irq's API, so the irq's refcount and state of both APIs can be
synchronized. Also add a check to prevent refcount from being less then
0 in amdgpu_irq_put().
v2:
- Add warning in amdgpu_irq_enable() if the irq is already disabled.
- Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change
if it is in gpu-reset.
v3:
- Improve commit message and code comments.
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Three functions in the amdgpu display driver cause -Wmissing-prototype
warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:1858:6: error: no previous prototype for 'is_timing_changed' [-Werror=missing-prototypes]
is_timing_changed() is actually meant to be a global symbol, but needs
a proper name and prototype.
Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Since the variable fpu_recursion_depth is per-CPU type, it has one copy
on each CPU, thread migration causes data consistency issue, then the
call trace shows up. And preemption disabling can't prevent migration.
[how]
Disable migration to ensure consistency of fpu_recursion_depth.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Extract edid's checksum and send it back for verification if EDID_TEST
is requested.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
