| Age | Commit message (Collapse) | Author |
|---|
|
It is stored in dynamically allocated memory, so sysfs_bin_attr_init() must
be called to initialize it. (Note: "initialization" only sets the .attr.key
member in this struct; it does not change the value of any other members.)
Otherwise, when CONFIG_DEBUG_LOCK_ALLOC=y this message appears during boot:
BUG: key ffff9248900cd148 has not been registered!
Fixes: 9037246bb2da ("drm/amd/display: Add sysfs interface for set/get srm")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1586
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-5.13-2021-05-05:
amdgpu:
- MPO hang workaround
- Fix for concurrent VM flushes on vega/navi
- dcefclk is not adjustable on navi1x and newer
- MST HPD debugfs fix
- Suspend/resumes fixes
- Register VGA clients late in case driver fails to load
- Fix GEM leak in user framebuffer create
- Add support for polaris12 with 32 bit memory interface
- Fix duplicate cursor issue when using overlay
- Fix corruption with tiled surfaces on VCN3
- Add BO size and stride check to fix BO size verification
radeon:
- Fix off-by-one in power state parsing
- Fix possible memory leak in power state parsing
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506033929.3875-1-alexander.deucher@amd.com
|
|
Our driver supports overlay planes, and as expected, some userspace
compositor takes advantage of these features. If the userspace is not
enabling the cursor, they can use multiple planes as they please.
Nevertheless, we start to have constraints when userspace tries to
enable hardware cursor with various planes. Basically, we cannot draw
the cursor at the same size and position on two separated pipes since it
uses extra bandwidth and DML only run with one cursor.
For those reasons, when we enable hardware cursor and multiple planes,
our driver should accept variations like the ones described below:
+-------------+ +--------------+
| +---------+ | | |
| |Primary | | | Primary |
| | | | | Overlay |
| +---------+ | | |
|Overlay | | |
+-------------+ +--------------+
In this scenario, we can have the desktop UI in the overlay and some
other framebuffer attached to the primary plane (e.g., video). However,
userspace needs to obey some rules and avoid scenarios like the ones
described below (when enabling hw cursor):
+--------+
|Overlay |
+-------------+ +-----+-------+ +-| |--+
| +--------+ | +--------+ | | +--------+ |
| |Overlay | | |Overlay | | | |
| | | | | | | | |
| +--------+ | +--------+ | | |
| Primary | | Primary | | Primary |
+-------------+ +-------------+ +-------------+
+-------------+ +-------------+
| +--------+ | Primary |
| |Overlay | | |
| | | | |
| +--------+ | +--------+ |
| Primary | | |Overlay | |
+-------------+ +-| |--+
+--------+
If the userspace violates some of the above scenarios, our driver needs
to reject the commit; otherwise, we can have unexpected behavior. Since
we don't have a proper driver validation for the above case, we can see
some problems like a duplicate cursor in applications that use multiple
planes. This commit fixes the cursor issue and others by adding adequate
verification for multiple planes.
Change since V1 (Harry and Sean):
- Remove cursor verification from the equation.
Cc: Louis Li <Ching-shih.Li@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Previous statement would always evaluate to true
making it meaningless
[how]
Just check if a connector is MST by checking if its port exists.
Fixes: 41efcd3879b1df ("drm/amd/display: Add MST capability to trigger_hotplug interface")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This hasn't been well tested and leads to complete system hangs on DCN1
based systems, possibly others.
The system hang can be reproduced by gesturing the video on the YouTube
Android app on ChromeOS into full screen.
[How]
Reject atomic commits with non-zero drm_plane_state.src_x or src_y values.
v2:
- Add code comment describing the reason we're rejecting non-zero
src_x and src_y
- Drop gerrit Change-Id
- Add stable CC
- Based on amd-staging-drm-next
v3: removed trailing whitespace
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Cc: nicholas.kazlauskas@amd.com
Cc: amd-gfx@lists.freedesktop.org
Cc: alexander.deucher@amd.com
Cc: Roman.Li@amd.com
Cc: hersenxs.wu@amd.com
Cc: danny.wang@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Some MST devices uses different method to enable mst
specific stream features.
[How]
Add dm_helpers_mst_enable_stream features. This can be
modified later when we are ready to implement those features.
Signed-off-by: Bing Guo <bing.guo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How?]
Call to dc_dsc_compute_bandwidth_range should have min and max bpp
in 16ths of a bit. Multiply min and max bpp from policy.
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
currently we enforce to update hdcp display using TYPE0, but there
is case that connector CP type prop be TYPE1 instead of type0.
[how]
using the drm prop of CP type of the connector as input argument.
Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Accept non-linear buffers which use a multi-planar format, as long
as they don't use DCC.
Tested on GFX9 with NV12.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch checks the return value of the function
dc_link_add_remote_sink before using it. This was causing
a crash during consecutive hotplugs of DP MST displays.
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
by plane.""
This reverts commit 55fa622fe635bfc3f2587d784f6facc30f8fdf12.
The regression caused by the original patch has been
cleared, thus introduce back the change.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK
set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B
is used instead by userspace.
[How]
Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B
for modifiers with DCC supported.
Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers")
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling.
[How]
Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Bindu Ramamurthy <bindur12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:941:13: warning: ‘dm_dmub_trace_high_irq’ defined but not used [-Wunused-function]
941 | static void dm_dmub_trace_high_irq(void *interrupt_params)
| ^~~~~~~~~~~~~~~~~~~~~~
Fixes: a08f16cfe8dc ("drm/amd/display: Log DMCUB trace buffer events")
Cc: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Solomon Chiu <solomon.chiu@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit f4a9be998c8ee39a30a68cb775c91928fe10a384.
The original commit was found to cause the following two issues
on sienna cichlid:
1. Refresh rate locked during vrrdemo
2. Display sticks on flipped landscape mode after changing
orientation, and cannot be changed back to regular landscape
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why&How]
The driver always wants to synchronize streams
to the first edge of master's vsync pulse.
In order to determine that we can read timing
flags that are used to program vsync.
Master stream's vsync polarity - Multi Display Stream Synchronization edge:
Negative - Falling Edge
Positive - Rising Edge
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need to be able to trigger software hotplug for MST connectors
[How]
For unplug the driver calls to disable topologies manager
that connector is attached to. For plugging in it does the
whole rediscovery of all connectors in drm device and enbles their
topologies if attached.
The interface for MST connectors works in the following way:
1. To disconnect all MST topologies currently connected:
echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst
2. To reconnect/rediscover all topologies that are physically
connected to the card:
echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst
A related fix which has been merged with this patch
Leo Ma(Hanghong Ma)'s work:
Set power states before disable MST topology
[Why]
When we try to disable MST topology from the
debugfs entry, some receiver will hang.
[How]
Set DPCD 600h power states to
2(power down mode)before disable MST topology.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why/how]
Skip logic that sets preffered link settings
and just retrain with new link_settings from Debugfs
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Commit 1c85f3db778ffbeba91d71e9d6c8aa299f9b4efd
("drm/amd/display: Add kernel doc to crc_rd_wrk
field") adds kernel doc for crc_rd_wrk field in
amdgpu_dm.h but it's incorrectly formatted.
Make htmldocs warns:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:398: warning:
Incorrect use of kernel-doc format: * @crc_rd_wrk
[How]
Tweak the kernel doc for crc_rd_wrk.
Fixes: 1c85f3db778ffb ("drm/amd/display: Add kernel doc to crc_rd_wrk field")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Currently to view the DCC_EN bit the entire DTN log
must be dumped. A compact method to view the DCC_EN
bit is desirable.
[how]
Introduce new debugfs interface that only dumps the
DCC_EN bit.
Example usage:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Functionality of LTTPR is reporter through the DPCD register
[How]
Expose a interface in debugfs to read the current status of
LTTPR as reported from the device's DPCD register
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In MST setup, we'd use MST downstream AUX to
dump the DPRX CRCs from sink device.
[how]
Assign the mst_port->aux to read DPCD registers.
Signed-off-by: David (Dingchen) Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Our CI enables drm.debug=0x4 logs and the dmesg is flooded with cursor
updates. We probably want to avoid spamming the log with DRM_DEBUG_KMS.
[how]
Define and use pr_debug macros instead of a few spammy DRM_DEBUG_*'s.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.
On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The drm dump_topology function was previously called on all
DP connectors. This resulted in empty topology dumps for those
connectors which weren't root MST nodes.
[how]
Make sure we only dump topology from the root MST node.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we have to debug VRR issues, we usually want to know the current
refresh rate; for this reason, it is handy to have a way to check in
real-time the refresh rate value. This commit introduces a kernel trace
that can provide such information.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
This was a regression introduced by commit:
drm/amd/display: Skip modeset for front porch change
Due to the change how timing parameters were set, scaled modes would
cause a black screen on some eDP panels. Would probably apply to
other displays (i.e. even non-eDP) that only have scaled modes,
but such case is not that usual for external displays.
[how]
Pick up crtc frame dimensions when programming the timing unless
it's FreeSync video mode.
Fixes: 6f59f229f8ed7a ("drm/amd/display: Skip modeset for front porch change")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Sometimes the primary plane might not be initialized (yet), which
causes dm_check_crtc_cursor to divide by zero.
Apparently a weird state before a S3-suspend causes the aforementioned
divide-by-zero error when resuming from S3. This was explained in
bug 212293 on Bugzilla.
To avoid this divide-by-zero error we check if the primary plane's fb
isn't NULL. If it's NULL the src_w and src_h attributes will be 0,
which would cause a divide-by-zero.
This fixes Bugzilla report 212293
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=212293
Fixes: 12f4849a1cfd69f3 ("drm/amd/display: check cursor scaling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
idle optimization was being disabled after commit.
[How]
check vblank count for display off and enable idle optimization based on this count.
Also,check added to ensure vblank count does not decrement, when count reaches 0.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On initializing the framebuffer, call drm_any_plane_has_format to do a
check if the modifier is supported. drm_any_plane_has_format calls
dm_plane_format_mod_supported which is extended to validate that the
modifier is on the list of the plane's supported modifiers.
The bug was caught using igt-gpu-tools test: kms_addfb_basic.addfb25-bad-modifier
Tested on ChromeOS Zork by turning on the display, running an overlay
test, and running a YT video.
=== Changes from v1 ===
Explicitly handle DRM_FORMAT_MOD_INVALID modifier.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert IRQ-based prints from DRM_DEBUG_DRIVER to
the appropriate DRM log type, since IRQ-based
prints drown out the rest of the driver's
DRM_DEBUG_DRIVER messages.
v2: Update as per feedback to fine-tune for each
type of DRM log level.
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to have special handlings for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
The amdgpu_dm IRQ handlers are not freed during the IRQ teardown.
[how]
Add function to deallocate IRQ handlers on amdgpu_dm_irq_fini step.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Catch invalid link_rate and link_count settings
2. Call dc interface to overwrite preferred link settings, and wait
until next stream update to apply the new settings.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We want to log DMCUB trace buffer events as Linux kernel traces.
[How]
Register an IRQ handler for DMCUB outbox0 interrupt in amdgpu_dm,
and log the messages in the DMCUB tracebuffer to a new DMCUB
TRACE_EVENT as soon as we receive the outbox0 IRQ from DMCUB FW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Receive warning message below:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:380: warning: Function
parameter or member 'crc_rd_wrk' not described in 'amdgpu_display_manager'
[How]
Add documentation for crc_rd_wrk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Added a new parameter and forgot to update the documentation.
Fixes: b6f91fc183f7 ("drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work")
Reviewed-by: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.13-2021-03-23:
amdgpu:
- Debugfs cleanup
- Various cleanups and spelling fixes
- Flexible array cleanups
- Initial AMD Freesync HDMI
- Display fixes
- 10bpc dithering improvements
- Display ASSR support
- Clean up and unify powerplay and swsmu interfaces
- Vangogh fixes
- Add SMU gfx busy queues for RV/PCO
- PCIE DPM fixes
- S0ix fixes
- GPU metrics data fixes
- DCN secure display support
- Backlight type override
- Add initial support for Aldebaran
- RAS fixes
- Prime fixes for A+A systems
- Reset fixes
- Initial resource cursor support
- Drop legacy IO BAR requirements
- Various power fixes
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- Debugfs cleanups
- Flexible array cleanups
UAPI:
- amdgpu: Add a new INFO ioctl interface to query video capabilities
rather than hardcoding them in userspace. This allows us to provide
fine grained asic capabilities (e.g., if a particular part is
bandwidth limited, we can limit the capabilities). Proposed userspace:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps
https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
- amdkfd: bump the driver version. There was a problem with reporting
some RAS features on older versions of the driver. Proposed userspace:
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/7cdd63475c36bb9f49bb960f90f9a8cdb7e80a21
Danvet: A bunch of conflicts all over, but it seems to compile ... I
did put the call to dc_allow_idle_optimizations() on a single line
since it looked a bit too jarring to be left alone.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
|
|
[Why]
Find out that when we are registering vertical interrupt0, we get
DC_IRQ_SOURCE_INVALID when call dc_interrupt_to_irq_source for
DCN_1_0__SRCID__OTG6_VERTICAL_INTERRUPT0_CONTROL.
After analyzing, it's due to the defined value for
DCN_1_0__SRCID__OTG6_VERTICAL_INTERRUPT0_CONTROL is not
(DCN_1_0__SRCID__OTG5_VERTICAL_INTERRUPT0_CONTROL + 1). It's not
incremental sequence.
[How]
Use an array to record all vertical interrupt0 SRCID. While registering
interrupt, use an incremental index to visit the array to get the right
SRCID to register.
Also add error handling to avoid potential pointer problem.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since this is a "revert of a revert", the end effect is that freesync
video is back to its original state, the way it was before the first
revert.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
vblank_workqueue is never released.
[How]
Free it upon dm finish.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We want to have a debugfs interface to enable or disable DMCUB
trace buffer events.
[How]
Add debugfs interface to enable or disable trace buffer events.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Received compiling warning:
All warnings (new ones prefixed by >>):
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5574:5:
warning: no previous prototype for 'amdgpu_dm_crtc_late_register'
[-Wmissing-prototypes]
5574 | int amdgpu_dm_crtc_late_register(struct drm_crtc *crtc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In
function 'dm_update_mst_vcpi_slots_for_dsc':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6405:46:
warning: variable 'old_con_state' set but not used
[-Wunused-but-set-variable]
6405 | struct drm_connector_state *new_con_state, *old_con_state;
| ^~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: In
function 'amdgpu_dm_commit_cursors':
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8006:44:
warning: variable 'new_plane_state' set but not used
[-Wunused-but-set-variable]
8006 | struct drm_plane_state *old_plane_state, *new_plane_state;
| ^~~~~~~~~~~~~~~
vim +/amdgpu_dm_crtc_late_register +5574
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
5572
5573 #ifdef CONFIG_DRM_AMD_SECURE_DISPLAY
> 5574 int amdgpu_dm_crtc_late_register(struct drm_crtc *crtc)
5575 {
5576 crtc_debugfs_init(crtc);
5577
5578 return 0;
5579 }
5580 #endif
5581
[How]
Fix it with declaration as "static"
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Find out few locks problems while doing secure display. They are
following few parts:
1. crc_rd_work_lock in amdgpu_dm_crtc_handle_crc_window_irq() should
also use spin_lock_irqsave instead of spin_lock_irq.
2. In crc_win_update_set(), crc_rd_work_lock should be grabbed after
obtaining lock event_lock. Otherwise, will cause deadlock by conflicting
the lock order in amdgpu_dm_crtc_handle_crc_window_irq()
3. flush_work() in crc_win_update_set() is no need and will cause
deadlock since amdgpu_dm_crtc_notify_ta_to_read() also tries to grab
lock crc_rd_work_lock.
[How]
Fix above problems.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Solomon Chiu <Solomon.Chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Word "helper" was misspelled as "helpes" in
dm_helpes_dmub_outbox0_interrupt_control function.
[how]
Fix the spelling.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dc_cursor_position do not initialise position.translate_by_source when
crtc or plane->state->fb is NULL. UBSAN caught this error in
dce110_set_cursor_position, as the value was garbage.
[How]
Initialise dc_cursor_position structure elements to 0 in handle_cursor_update
before calling get_cursor_position.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1471
Reported-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why] It helps debugging display setup issues
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'drm/drm_hdcp.h' included in 'amdgpu_dm.c' is duplicated.
Reported-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
