| Age | Commit message (Collapse) | Author |
|---|
|
Currently, we store CU info only for a single XCC assuming
that it is the same for all XCCs. However, that may not be
true. As a result, store CU info for all XCCs. This info is
later used for CU masking.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the following unaligned 64-bit doorbell
warning seen when submitting packets on HIQ on GFX v9.4.3
by making the HIQ doorbell 64-bit aligned.
The warning is seen when GPU is loaded in any mode other
than SPX mode.
[ +0.000301] ------------[ cut here ]------------
[ +0.000003] Unaligned 64-bit doorbell
[ +0.000030] WARNING: /amdkfd/kfd_doorbell.c:339 write_kernel_doorbell64+0x72/0x80
[ +0.000003] RIP: 0010:write_kernel_doorbell64+0x72/0x80
[ +0.000004] RSP: 0018:ffffc90004287730 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ +0.000003] RDX: 0000000000000001 RSI: ffffffff82837c71 RDI: 00000000ffffffff
[ +0.000003] RBP: ffffc90004287748 R08: 0000000000000003 R09: 0000000000000001
[ +0.000002] R10: 000000000000001a R11: ffff88a034008198 R12: ffffc900013bd004
[ +0.000003] R13: 0000000000000008 R14: ffffc900042877b0 R15: 000000000000007f
[ +0.000003] FS: 00007fa8c7b62000(0000) GS:ffff889f88400000(0000) knlGS:0000000000000000
[ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000003] CR2: 000056111c45aaf0 CR3: 00000001414f2002 CR4: 0000000000770ee0
[ +0.000003] PKRU: 55555554
[ +0.000002] Call Trace:
[ +0.000004] <TASK>
[ +0.000006] kq_submit_packet+0x45/0x50 [amdgpu]
[ +0.000524] pm_send_set_resources+0x7f/0xc0 [amdgpu]
[ +0.000500] set_sched_resources+0xe4/0x160 [amdgpu]
[ +0.000503] start_cpsch+0x1c5/0x2a0 [amdgpu]
[ +0.000497] kgd2kfd_device_init.cold+0x816/0xb42 [amdgpu]
[ +0.000743] amdgpu_amdkfd_device_init+0x15f/0x1f0 [amdgpu]
[ +0.000602] amdgpu_device_init.cold+0x1813/0x2176 [amdgpu]
[ +0.000684] ? pci_bus_read_config_word+0x4a/0x80
[ +0.000012] ? do_pci_enable_device+0xdc/0x110
[ +0.000008] amdgpu_driver_load_kms+0x1a/0x110 [amdgpu]
[ +0.000545] amdgpu_pci_probe+0x197/0x400 [amdgpu]
Fixes: c31866651086 ("drm/amdgpu: use doorbell mgr for kfd kernel doorbells")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the case where the code currently passes
absolute register address and not the reg offset, which HWS
expects, when sending the PM4 packet to set/update CWSR grace
period. Additionally, cleanup the signature of
build_grace_period_packet_info function as it no longer needs
the inst parameter.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull drm fixes from Dave Airlie:
"Regular rounds of rc1 fixes, a large bunch for amdgpu since it's three
weeks in one go, one i915, one nouveau and one ivpu.
I think there might be a few more fixes in misc that I haven't pulled
in yet, but we should get them all for rc2.
amdgpu:
- Display replay fixes
- Fixes for headless boards
- Fix documentation breakage
- RAS fixes
- Handle newer IP discovery tables
- SMU 13.0.6 fixes
- SR-IOV fixes
- Display vstartup fixes
- NBIO 7.9 fixes
- Display scaling mode fixes
- Debugfs power reporting fix
- GC 9.4.3 fixes
- Dirty framebuffer fixes for fbcon
- eDP fixes
- DCN 3.1.5 fix
- Display ODM fixes
- GPU core dump fix
- Re-enable zops property now that IGT test is fixed
- Fix possible UAF in CS code
- Cursor degamma fix
amdkfd:
- HMM fixes
- Interrupt masking fix
- GFX11 MQD fixes
i915:
- Mark requests for GuC virtual engines to avoid use-after-free
nouveau:
- Fix fence state in nouveau_fence_emit()
ivpu:
- replace strncpy"
* tag 'drm-next-2023-09-08' of git://anongit.freedesktop.org/drm/drm: (51 commits)
drm/amdgpu: Restrict bootloader wait to SMUv13.0.6
drm/amd/display: prevent potential division by zero errors
drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma
drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1
Revert "drm/amd/display: Remove v_startup workaround for dcn3+"
drm/amdgpu: fix amdgpu_cs_p1_user_fence
Revert "Revert "drm/amd/display: Implement zpos property""
drm/amdkfd: Add missing gfx11 MQD manager callbacks
drm/amdgpu: Free ras cmd input buffer properly
drm/amdgpu: Hide xcp partition sysfs under SRIOV
drm/amdgpu: use read-modify-write mode for gfx v9_4_3 SQ setting
drm/amdkfd: use mask to get v9 interrupt sq data bits correctly
drm/amdgpu: Allocate coredump memory in a nonblocking way
drm/amdgpu: Support query ecc cap for aqua_vanjaram
drm/amdgpu: Add umc_info v4_0 structure
drm/amd/display: always switch off ODM before committing more streams
drm/amd/display: Remove wait while locked
drm/amd/display: update blank state on ODM changes
drm/amd/display: Add smu write msg id fail retry process
drm/amdgpu: Add SMU v13.0.6 default reset methods
...
|
|
mqd_stride function was introduced in commit 2f77b9a242a2
("drm/amdkfd: Update MQD management on multi XCC setup")
but not assigned for gfx11. Fixes a NULL dereference in debugfs.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.5.x
|
|
Interrupt sq data bits were not taken properly from contextid0 and contextid1.
Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
|
|
Replace pr_err with dev_err to show the bus-id of
failing device with kfd queue errors
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mqd_stride function was introduced in commit 2f77b9a242a2
("drm/amdkfd: Update MQD management on multi XCC setup")
but not assigned for gfx11. Fixes a NULL dereference in debugfs.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional change. Use ratelimited version of pr_ to avoid
overflowing of dmesg buffer
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Interrupt sq data bits were not taken properly from contextid0 and contextid1.
Use macro KFD_CONTEXT_ID_GET_SQ_INT_DATA instead.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable KFD for GC 11.5.0.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
Use the helpers to simplify code.
Link: https://lkml.kernel.org/r/20230728050043.59880-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove redundant assignment when skipping process ctx clear.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To prevent its redundant implementation and streamline
code, use memdup_user.
This fixes warnings reported by Coccinelle:
./drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c:2811:13-20: WARNING opportunity for memdup_user
Signed-off-by: Atul Raut <rauji.raut@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When CONFIG_DYNAMIC_DEBUG is disabled altogether, calling
_dynamic_func_call_no_desc() does not work:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c: In function 'svm_range_set_attr':
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:52:9: error: implicit declaration of function '_dynamic_func_call_no_desc' [-Werror=implicit-function-declaration]
52 | _dynamic_func_call_no_desc("svm_range_dump", svm_range_debug_dump, svms)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:3564:9: note: in expansion of macro 'dynamic_svm_range_dump'
3564 | dynamic_svm_range_dump(svms);
| ^~~~~~~~~~~~~~~~~~~~~~
Add a compile-time conditional in addition to the runtime check.
Fixes: 8923137dbe4b ("drm/amdkfd: avoid svm dump when dynamic debug disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously asymptomatic because high 32 bits were zero.
Fixes: 96c211f1f9ef ("drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole")
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Drop the navi10 in the name for consistency with other
families. All gfx10 parts use the same implementation.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that we use the dGPU path for all APUs, drop the
IOMMUv2 support.
v2: drop the now unused queue manager functions for gfx7/8 APUs
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are dropping the IOMMUv2 path, so no need to enable this.
It's often buggy on consumer platforms anyway.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We are dropping the IOMMUv2 path, so no need to enable this.
It's often buggy on consumer platforms anyway.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch removes some variables and functions from KFD
doorbell handling code, which are no more required since
doorbell manager is handling doorbell calculations.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch:
- adds a doorbell object in kfd pdd structure.
- allocates doorbells for a process while creating its queue.
- frees the doorbells with pdd destroy.
- moves doorbell bitmap init function to kfd_doorbell.c
PS: This patch ensures that we don't break the existing KFD
functionality, but now KFD userspace library should also
create doorbell pages as AMDGPU GEM objects using libdrm
functions in userspace. The reference code for the same
is available with AMDGPU Usermode queue libdrm MR. Once
this is done, we will not need to create process doorbells
in kernel.
V2: - Do not use doorbell wrapper API, use amdgpu_bo_create_kernel
instead (Alex).
- Do not use custom doorbell structure, instead use separate
variables for bo and doorbell_bitmap (Alex)
V3:
- Do not allocate doorbell page with PDD, delay doorbell process
page allocation until really needed (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felilx.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch:
- adds a doorbell bo in kfd device structure.
- creates doorbell page for kfd kernel usages.
- updates the get_kernel_doorbell and free_kernel_doorbell functions
accordingly
V2: Do not use wrapper API, use direct amdgpu_create_kernel(Alex)
V3:
- Move single variable declaration below (Christian)
- Add a to-do item to reuse the KGD kernel level doorbells for
KFD for non-MES cases, instead of reserving one page (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMEM instructions can reach addresses above 47 bits but require
bit 47 to be sign-extended through bits [63:48].
This allows the TMA to be relocated in a following patch.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The TBA and TMA, along with an unused IB allocation, reside at low
addresses in the VM address space. A stray VM fault which hits these
pages must be serviced by making their page table entries invalid.
The scheduler depends upon these pages being resident and fails,
preventing a debugger from inspecting the failure state.
By relocating these pages above 47 bits in the VM address space they
can only be reached when bits [63:48] are set to 1. This makes it much
less likely for a misbehaving program to generate accesses to them.
The current placement at VA (PAGE_SIZE*2) is readily hit by a NULL
access with a small offset.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some changes have been lost during rebases. Rebuild sources.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.6-2023-07-28:
amdgpu:
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SubVP fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- Add PSP 14.0 support
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
radeon:
- Lots of checkpatch cleanups
Merge conflicts:
- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
The switch to drm eu helpers in 8a206685d36f ("drm/amdgpu: use
drm_exec for GEM and CSA handling v2") clashed with the
cosmetic cleanups from 30953c4d000b ("drm/amdgpu: Fix style
issues in amdgpu_gem.c"). I
kept the former since the cleanup up code is gone.
- drivers/gpu/drm/amd/amdgpu/atom.c.
adf64e214280 ("drm/amd: Avoid reading the VBIOS part number
twice") removed code that 992b8fe106ab ("drm/radeon: Replace
all non-returning strlcpy with strscpy") polished.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230728214228.8102-1-alexander.deucher@amd.com
[sima: some merge conflict wrangling as noted]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The MES cached process context must be cleared on adding any queue for
the first time.
For proper debug support, the MES will clear it's cached process context
on the first call to SET_SHADER_DEBUGGER.
This allows TTMPs to be pesistently enabled in a safe manner.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Eric Huang <jinhuieric@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Extend checkpoint logic to allow inclusion of VRAM BOs that
do not have a VA attached
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists
from svm_range_debug_dump when dynamic debug is disabled. Otherwise,
it could drop performance, specially with big number of SVM ranges.
Make sure both svm_range_set_attr and svm_range_debug_dump functions
are dynamically enabled to print svm_range_debug_dump debug traces.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the list of devices that require the cwsr trap handling
workaround for debugging use cases.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Ruili Ji <ruili.ji@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.6:
UAPI Changes:
* fbdev:
* Make fbdev userspace interfaces optional; only leaves the
framebuffer console active
* prime:
* Support dma-buf self-import for all drivers automatically: improves
support for many userspace compositors
Cross-subsystem Changes:
* backlight:
* Fix interaction with fbdev in several drivers
* base: Convert struct platform.remove to return void; part of a larger,
tree-wide effort
* dma-buf: Acquire reservation lock for mmap() in exporters; part
of an on-going effort to simplify locking around dma-bufs
* fbdev:
* Use Linux device instead of fbdev device in many places
* Use deferred-I/O helper macros in various drivers
* i2c: Convert struct i2c from .probe_new to .probe; part of a larger,
tree-wide effort
* video:
* Avoid including <linux/screen_info.h>
Core Changes:
* atomic:
* Improve logging
* prime:
* Remove struct drm_driver.gem_prime_mmap plus driver updates: all
drivers now implement this callback with drm_gem_prime_mmap()
* gem:
* Support execution contexts: provides locking over multiple GEM
objects
* ttm:
* Support init_on_free
* Swapout fixes
Driver Changes:
* accel:
* ivpu: MMU updates; Support debugfs
* ast:
* Improve device-model detection
* Cleanups
* bridge:
* dw-hdmi: Improve support for YUV420 bus format
* dw-mipi-dsi: Fix enable/disable of DSI controller
* lt9611uxc: Use MODULE_FIRMWARE()
* ps8640: Remove broken EDID code
* samsung-dsim: Fix command transfer
* tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups
* Cleanups
* ingenic:
* Kconfig REGMAP fixes
* loongson:
* Support display controller
* mgag200:
* Minor fixes
* mxsfb:
* Support disabling overlay planes
* nouveau:
* Improve VRAM detection
* Various fixes and cleanups
* panel:
* panel-edp: Support AUO B116XAB01.4
* Support Visionox R66451 plus DT bindings
* Cleanups
* ssd130x:
* Support per-controller default resolution plus DT bindings
* Reduce memory-allocation overhead
* Cleanups
* tidss:
* Support TI AM625 plus DT bindings
* Implement new connector model plus driver updates
* vkms
* Improve write-back support
* Documentation fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
|
|
The feature to save the dispatch ID in trap temporaries 6 & 7 on context
save is unconditionally enabled during MQD initialization.
Now that TTMPs are always setup regardless of debug mode for GC 9.4.3, we
should report that the dispatch ID is always available for debug/trap
handling.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For GFX9.4.3, setup a reduced default CWSR grace period equal to
1000 cycles instead of 64000 cycles.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Similar to GC v9.4.2, GC v9.4.3 should use the 5-Dword extended
MAP_PROCESS packet to support multi-process debugging. Update the
mutli-process debug support list so that the KFD updates the runlist
on debug mode setting and that it allocates enough GTT memory during
KFD device initialization.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set watch points for all xcc instances on GFX943.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
