summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu
AgeCommit message (Collapse)Author
2022-09-13drm/amdgpu: Fix hive reference count leakVignesh Chander
both get_xgmi_hive and put_xgmi_hive can be skipped since the reset domain is not necessary for VF Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: change the alignment size of TMR BO to 1MYang Wang
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: Enable full reset when RAS is supported on gc v11_0_0Candice Li
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: Rely on MCUMC_STATUS for umc v8_10 correctable error counter onlyCandice Li
Only check MCUMC_STATUS for CE counter for umc v8_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: Use per device reset_domain for XGMI on sriov configurationshaoyunl
For SRIOV configuration, host driver control the reset method(either FLR or heavier chain reset). The host will notify the guest individually with FLR message if individual GPU within the hive need to be reset. So for guest side, no need to use hive->reset_domain to replace the original per device reset_domain Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: use dirty framebuffer helperHamza Mahfooz
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amdgpu: Don't enable LTR if not supportedLijo Lazar
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-12Merge tag 'amd-drm-next-6.1-2022-09-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.1-2022-09-08: amdgpu: - Mode2 reset for RDNA2 - Lots of new DC documentation - Add documentation about different asic families - DSC improvements - Aldebaran fixes - Misc spelling and grammar fixes - GFXOFF stats support for vangogh - DC frame size fixes - NBIO 7.7 updates - DCN 3.2 updates - DCN 3.1.4 Updates - SMU 13.x updates - Misc bug fixes - Rework DC register offset handling - GC 11.x updates - PSP 13.x updates - SDMA 6.x updates - GMC 11.x updates - SR-IOV updates - PSP fixes for TA unloading - DSC passthrough support - Misc code cleanups amdkfd: - ISA fixes for some GC 10.3 IPs - Misc code cleanups radeon: - Delayed work flush fix - Use time_after for some jiffies calculations drm: - DSC passthrough aux support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220908155202.57862-1-alexander.deucher@amd.com
2022-09-11Merge tag 'drm-misc-next-2022-09-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1-rc1: [airlied - fix sun4i_tv build] UAPI Changes: - Hide unregistered connectors from GETCONNECTOR ioctl. - drm/virtio no longer advertises LINEAR modifier, as it doesn't work. - Cross-subsystem Changes: - Fix GPF in udmabuf failure path. Core Changes: - Rework TTM placement to use intersect/compatible functions. - Drop legacy DP-MST support. - More DP-MST related fixes, and move all state into atomic. - Make DRM_MIPI_DBI select DRM_KMS_HELPER. - Add audio_infoframe packing for DP. - Add logging when some atomic check functions fail. - Assorted documentation updates and fixes. Driver Changes: - Assorted cleanups and fixes in msm, lcdif, nouveau, virtio, panel/ilitek, bridge/icn6211, tve200, gma500, bridge/*, panfrost, via, bochs, qxl, sun4i. - Add add AUO B133UAN02.1, IVO M133NW4J-R3, Innolux N120ACA-EA1 eDP panels. - Improve DP-MST modeset state handling in amdgpu, nouveau, i915. - Drop DP-MST from radeon driver, it was broken and only user of legacy DP-MST. - Handle unplugging better in vc4. - Simplify drm cmdparser tests. - Add DP support to ti-sn65dsi86. - Add MT8195 DP support to mediatek. - Support RGB565, XRGB64, and ARGB64 formats in vkms. - Convert sun4i tv support to atomic. - Refactor vc4/vec TV Modesetting, and fix timings. - Use atomic helpers instead of simple display helpers in ssd130x. Maintainer changes: - Add Douglas Anderson as reviewer for panel-edp. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a489485b-3ebc-c734-0f80-aed963d89efe@linux.intel.com
2022-09-07drm/amdgpu: prevent toc firmware memory leakGuchun Chen
It's missed in psp fini. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdgpu: correct doorbell range/size value for CSDMA_DOORBELL_RANGEYifan Zhang
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdkfd: print address in hex format rather than decimalYifan Zhang
Addresses should be printed in hex format. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amd/amdgpu: add rlc_firmware_header_v2_4 to amdgpu_firmware_headerChengming Gui
Add missing structure to avoid incorrect size and version check. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-07drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is ↵YiPeng Chai
uninstalled V1: The psp_cmd_submit_buf function is called by psp_hw_fini to send TA unload messages to psp to terminate ras, asd and tmr. But when amdgpu is uninstalled, drm_dev_unplug is called earlier than psp_hw_fini in amdgpu_pci_remove, the calling order as follows: static void amdgpu_pci_remove(struct pci_dev *pdev) { drm_dev_unplug ...... amdgpu_driver_unload_kms->amdgpu_device_fini_hw->... ->.hw_fini->psp_hw_fini->... ->psp_ta_unload->psp_cmd_submit_buf ...... } The program will return when calling drm_dev_enter in psp_cmd_submit_buf. So the call to drm_dev_enter in psp_cmd_submit_buf should be removed, so that the TA unload messages can be sent to the psp when amdgpu is uninstalled. V2: 1. Restore psp_cmd_submit_buf to its original code. 2. Move drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. 3. Since amdgpu_device_fini_hw is called by amdgpu_driver_unload_kms, remove the unplug check to release device mmio resource in amdgpu_device_fini_hw before calling drm_dev_unplug. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-06Merge tag 'drm-misc-next-2022-08-20-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.1: UAPI Changes: Cross-subsystem Changes: - DMA-buf: documentation updates. - Assorted small fixes to vga16fb - Fix fbdev drivers to use the aperture helpers. - Make removal of conflicting drivers work correctly without fbdev enabled. Core Changes: - bridge, scheduler, dp-mst: Assorted small fixes. - Add more format helpers to fourcc, and use it to replace the cpp usage. - Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx ("darkness", inverted single channel) - Add packed AYUV8888 and XYUV8888 formats. - Assorted documentation updates. - Rename ttm_bo_init to ttm_bo_init_validate. - Allow TTM bo's to exist without backing store. - Convert drm selftests to kunit. - Add managed init functions for (panel) bridge, crtc, encoder and connector. - Fix endianness handling in various format conversion helpers. - Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565 - Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so drm_plane_helper is no longer needed in most drivers. - Use idr_init_base instead of idr_init. - Rename FB and GEM CMA helpers to DMA helpers. - Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that takes a iosys_map. Make drm_fb_memcpy take an iosys_map too. - Move edid luminance calculation to core, and use it in i915. Driver Changes: - bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767}, nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111: Assorted small fixes and doc updates. - vc4: Rework hdmi power up, and depend on PM. - panel/simple: Add Samsung LTL101AL01. - ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property is unchanged, and use the new PM ops. - Revert some amdgpu commits that cause garbaged graphics when starting X, and reapply them with the real problem fixed. - Completely rework vc4 init to use managed helpers. - Rename via_drv to via_dri1, and move all stuff there only used by the dri1 implementation in preperation for atomic modeset. - Use regmap bulk write in ssd130x. - Power sequence and clock updates to it6505. - Split panel-sitrox-st7701 init sequence and rework mode programming code. - virtio: Improve error and edge conditions handling, and convert to use managed helpers. - Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels. - Add generic fbdev support to komeda. - Split mgag200 modeset handling to make it more model-specific. - Convert simpledrm to use atomic helpers. - Improve udl suspend/disconnect handling. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
2022-09-03drm/amdgpu: Register ACPI video backlight when skipping amdgpu backlight ↵Hans de Goede
registration Typically the acpi_video driver will initialize before amdgpu, which used to cause /sys/class/backlight/acpi_video0 to get registered and then amdgpu would register its own amdgpu_bl# device later. After which the drivers/acpi/video_detect.c code unregistered the acpi_video0 device to avoid there being 2 backlight devices. This means that userspace used to briefly see 2 devices and the disappearing of acpi_video0 after a brief time confuses the systemd backlight level save/restore code, see e.g.: https://bbs.archlinux.org/viewtopic.php?id=269920 To fix this the ACPI video code has been modified to make backlight class device registration a separate step, relying on the drm/kms driver to ask for the acpi_video backlight registration after it is done setting up its native backlight device. Add a call to the new acpi_video_register_backlight() when amdgpu skips registering its own backlight device because of either the firmware_flags or the acpi_video_get_backlight_type() return value. This ensures that if the acpi_video backlight device should be used, it will be available before the amdgpu drm_device gets registered with userspace. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-09-01drm/amdgpu/vcn: Add MMSCH v4_0 support for sriovJane Jian
These structures are basically ported from MMSCH v3_0, besides, added RB and RB4 enablement flag to support unified queue Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Add sriov VCN v4_0 unified queue supportJane Jian
Enable unified queue support for sriov, abandon all previous multi-queue settings Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Add vcn/vcn1 in white list to load its firmware under sriovJane Jian
Previously since vcn0/vcn1 are not enabled, loading firmware is skipped. Now add firmware loading back since vcn0/vcn1 has already been enabled on sriov Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/vcn: Disable CG/PG for SRIOVJane Jian
For sriov, CG and MG are controlled from hypervisor side, no need to manage them again in ip init Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/admgpu: Skip CG/PG on SOC21 under SRIOV VFYifan Zha
[Why] There is no CG(Clock Gating)/PG(Power Gating) requirement on SRIOV VF. For multi VF, VF should not enable any CG/PG features. For one VF, PF will program CG/PG related registers. [How] Do not set any cg/pg flag bit at early init under sriov. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Use RLCG to program GRBM_GFX_CNTL during full access timeYifan Zha
[Why] KIQ register init requires GRBM_GFX_CNTL to select KIQ. [How] As RLCG accessing registers will save the data of GRBM_GFX_CNTL and restore it. Use RLCG indirect accessing register method to select grbm instead of mmio directly access. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Skip program SDMA0_SEM_WAIT_FAIL_TIMER_CNTL under SRIOV VFYifan Zha
[Why] As SDMA0_SEM_WAIT_FAIL_TIMER_CNTL is a PF-only register, L1 would block this register for VF access. [How] VF do not program it. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Skip the VRAM base offset on SRIOVYifan Zha
[Why] As VF cannot read MMMC_VM_FB_OFFSET with L1 Policy(read 0xffffffff). It leads to driver get the incorrect vram base offset. [How] Since SR-IOV is dGPU only, skip reading this register and set the fb_offest to 0. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: skip "Issue additional private vm invalidation to MMHUB" on SRIOVYifan Zha
[Why] vm_l2_bank_select_reserved_cid2 is a PF_only register that cannot be programmed by VF. This feature is only support HDP using GPUVM page tables to access FB memory which should be disabled on SRIOV. [How] Disable the feature on VF. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Skip the program of MMMC_VM_AGP_* in SRIOV on MMHUB v3_0_0Yifan Zha
[Why] VF should not program these registers, the value were defined in the host. [How] Skip writing them in SRIOV environment and program them on host side. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Use PSP program IH_RB_CNTL registers under SRIOVYifan Zha
[Why] With L1 Policy applied, IH_RB_CNTL/RING cannot be accessed by VF. [How] Use PSP program IH_RB_CNTL in VF. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: Support PSP 13.0.10 on SR-IOVHorace Chen
Add support for PSP 13.0.10 for SR-IOV VF Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: sriov remove vcn_4_0 and jpeg_4_0Horace Chen
SRIOV needs to initialize mmsch instead of multimedia engines directly. So currently remove them for SR-IOV until the code and firmwares are ready. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: refine virtualization psp fw skip checkHorace Chen
SR-IOV may need to load different firmwares for different ASIC inside VF. So create a new function in amdgpu_virt to check whether FW load needs to be skipped. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: enable WPTR_POLL_ENABLE for sriov on sdma_v6_0Horace Chen
[Why] Under SR-IOV, if VF is switched out then its doorbell will be disabled, SDMA rely on WPTR_POLL to get doorbells which was sent during VF switched-out time. [How] For SR-IOV, set SDMA WPTR_POLL_ENABLE to 1. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: add a compute pipe reset for RS64Horace Chen
[Why] Under SR-IOV, we are not sure whether pipe status is good or not when doing initialization. The compute engine maybe fail to bringup if pipe status is bad. [How] Do an RS64 pipe reset for MEC before we do initialization. Also apply to bare-metal. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: add sriov nbio callback structureHorace Chen
[Why] under SR-IOV, the nbio doorbell range will be defined by PF. So VF nbio doorbell range registers will be blocked. It will cause violation if VF access those registers directly. [How] create an nbio_v4_3_sriov_funcs for sriov nbio_v4_3 initialization to skip the setting for the doorbell range registers. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu: add CHIP_IP_DISCOVERY support for virtualizationHorace Chen
For further chips we will use CHIP_IP_DISCOVERY, so add this support for virtualization Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Horace Chen <horace.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1Yifan Zhang
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-01drm/amd/amdgpu: skip ucode loading if ucode_size == 0Chengming Gui
Restrict the ucode loading check to avoid frontdoor loading error. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Remove the unneeded result variable 'r'ye xingchen
Return the value sdma_v4_0_start() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: add new ip block for MES 11.0.3Hawking Zhang
Add ip block support for mes v11_0_3. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: add new ip block for GFX 11.0Hawking Zhang
Add ip block support for gfx v11_0_3. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: Set GC family for GC 11.0.3Hawking Zhang
Set AMDGPU_FAMILY_GC_11_0_0. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: enable imu_rlc_ram programming for v11_0_3Hawking Zhang
All gc v11_0_3 registers in gcvml2 range have different register offset from the ones in gc v11_0_0. v11_0_3 imu_rlc_ram programming has to be separated from v11_0_0 implementation v2: fix checkpatch errors (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: init gfx config for gfx v11_0_3Hawking Zhang
initialize some gfx config for gfx v11_0_3 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: declare firmware for new MES 11.0.3Hawking Zhang
To support new mes ip block Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: declare firmware for new GC 11.0.3Hawking Zhang
To support new gfx ip block Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: add new ip block for GMC 11.0Hawking Zhang
Add ip block support for gmc v11_0_3. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: initialize gmc sw config for v11_0_3Hawking Zhang
initialize gmc sw config for v11_0_3 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: add gfxhub_v3_0_3 supportYang Wang
add gfxhub_v3_0_3 support Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-30drm/amdgpu: only init tap_delay ucode when it's included in ucode binaryHawking Zhang
Not all the gfx10 variants need to integrate global tap_delay and per se tap_delay firmwares Only init tap_delay ucode when it does include in rlc ucode binary so driver doesn't send a null buffer to psp for firmware loading Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: add new ip block for LSDMA 6.0Hawking Zhang
Add ip block support for lsdma v6_0_3. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-29drm/amdgpu: add new ip block for sdma 6.0Hawking Zhang
Add ip block support for sdma v6_0_3. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 13:22:48 +0000