summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
AgeCommit message (Collapse)Author
2023-06-09drm/amdgpu: detect current GPU memory partition modeRajneesh Bhardwaj
- Add helpers to detect the current GPU memory partition. - Add current memory partition mode sysfs node. Tested-by: Ori Messinger <Ori.Messinger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: implement smuio v13_0_3 callbacksRajneesh Bhardwaj
Add smuio v13_0_3 callbacks for SMUIO. Tested-by: Ori Messinger <Ori.Messinger@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/amdgpu: Update debugfs for XCC support (v3)Tom St Denis
This patch updates the 'regs2' interface for MMIO registers to add a new IOCTL command for a 'v2' state data that includes the XCC ID. This patch then updates amdgpu_gfx_select_se_sh() and amdgpu_gfx_select_me_pipe_q() (and the implementations in the gfx drivers) to support an additional parameter. This patch then creates a new debugfs interface "gprwave" which is a merge of shader GPR and wave status access. This new inteface uses an IOCTL to select banks as well as XCC identity. (v2) Fix missing xcc_id in wave_ind function (v3) Fix pm runtime calls and mutex locking (v4) Fix bad label Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Change num_xcd to xcc_maskLijo Lazar
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs available on the ASIC. XCC configuration could differ based on different ASIC configs. v2: Rename num_xcd to num_xcc (Hawking) Use smaller xcc_mask size, changed to u16 (Le) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add sysfs node for compute partition modeLe Ma
Add current/available compute partitin mode sysfs node. v2: make the sysfs node as IP independent one in amdgpu_gfx.c Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add [en/dis]able_kgq() functionsAlex Deucher
To replace the IP specific variants which are largely duplicate. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amdgpu: add gfx shadow callbackAlex Deucher
To provide IP specific shadow sizes. UMDs will use this to query the kernel driver for the size of the shadow buffers. v2: make callback return an int (Alex) v3: drop GDS (Alex) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amdgpu/gfx11: add FW version check for new CP GFX shadow featureAlex Deucher
Use this to determine if we support the new SET_Q_PREEMPTION_MODE packet. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-20drm/amdgpu: add master/slave check in init phaseLe Ma
Skip KCQ setup on slave xcc as there's no use case. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add xcc index argument to select_sh_se function v2Le Ma
v1: To support multiple XCD case (Le) v2: introduce xcc index to gfx_v11_0_select_sh_se (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add multi-xcc support to amdgpu_gfx interfaces (v4)Le Ma
v1: Modify kiq_init/fini, mqd_sw_init/fini and enable/disable_kcq to adapt to multi-die case. Pass 0 as default to all asics with single xcc (Le) v2: squash commits to avoid breaking the build (Le) v3: unify naming style (Le) v4: apply the changes to gc v11_0 (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: separate the mqd_backup for kiq from kcqLe Ma
This will benifit the mqd indexing for kiq/kcq in multi XCD case. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: move queue_bitmap to an independent structure (v3)Le Ma
To allocate independent queue_bitmap for each XCD, then the old bitmap policy can be continued to use with a clear logic. Use mec_bitmap[0] as default for all non-GC 9.4.3 IPs. v2: squash commits to avoid breaking the build v3: unify naming style Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: convert gfx.kiq to array type (v3)Le Ma
v1: more kiq instances are a available in SOC (Le) v2: squash commits to avoid breaking the build (Le) v3: make the conversion for gfx/mec v11_0 (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: add some basic elements for multiple XCD caseLe Ma
Add some basic definitions and structure member. Inscrease MAX_WB slots to 1024 to support the increasing number of rings for multiple partitions. v2: unify naming style Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-23drm/amdgpu: add more fields into device info, caches sizes, etc.Marek Olšák
AMDGPU_IDS_FLAGS_CONFORMANT_TRUNC_COORD: important for conformance on gfx11 Other fields are exposed from IP discovery. enabled_rb_pipes_mask_hi is added for future chips, currently 0. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403 Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Perform gpu reset after gfx finishes processing ras poison ↵YiPeng Chai
consumption on gfx_v11_0_3 Perform gpu reset after gfx finishes processing ras poison consumption on gfx_v11_0_3. V2: Move gfx poison consumption handler from hw_ops to ip function level. V3: Adjust the calling position of amdgpu_gfx_poison_consumation_handler. V4: Since gfx v11_0_3 does not have .hw_ops instance, the .hw_ops null pointer check in amdgpu_ras_interrupt_poison_consumption_handler needs to be adjusted. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add gfx ras poison consumption irq handling on gfx v11_0_3YiPeng Chai
Add gfx ras poison consumption irq handling on gfx v11_0_3. V2: Move ras poison consumption irq handling code of gfx v11_0_3 to gfx_v11_0_3.c. V5: Create dedicated irq handler for RLC_GC_FED_INTERRUPT. V6: Remove invalid function call. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add gfx ras function on gfx v11_0_3YiPeng Chai
Add gfx ras function on gfx v11_0_3. V2: 1. Add separate source files for gfx v11_0_3. 2. Create a common function to initialize gfx ras block. V3: 1. Rename amdgpu_gfx_ras_block_init to amdgpu_gfx_ras_sw_init. 2. Adjust the calling position of amdgpu_gfx_ras_sw_init. 3. Remove gfx_v11_0_3_ras_ops. V4: Revert changes in amdgpu_ras_interrupt_poison_consumption_handler. V5: 1. Remove invalid include file in gfx_v11_0_3.c. 2. Reduce the number of parameters of amdgpu_gfx_ras_sw_init. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-02drm/amdgpu: Add software ring callbacks for gfx9 (v8)Jiadong.Zhu
Set ring functions with software ring callbacks on gfx9. The software ring could be tested by debugfs_test_ib case. v2: Set sw_ring 2 to enable software ring by default. v3: Remove the parameter for software ring enablement. v4: Use amdgpu_ring_init/fini for software rings. v5: Update for code format. Fix conflict. v6: Remove unnecessary checks and enable software ring on gfx9 by default. v7: Use static array for software ring names and priorities. v8: Stop creating software rings if no gfx ring existed. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-02drm/amdgpu: Introduce gfx software ring (v9)Jiadong.Zhu
The software ring is created to support priority context while there is only one hardware queue for gfx. Every software ring has its fence driver and could be used as an ordinary ring for the GPU scheduler. Multiple software rings are bound to a real ring with the ring muxer. The packages committed on the software ring are copied to the real ring. v2: Use array to store software ring entry. v3: Remove unnecessary prints. v4: Remove amdgpu_ring_sw_init/fini functions, using gtt for sw ring buffer for later dma copy optimization. v5: Allocate ring entry dynamically in the muxer. v6: Update comments for the ring muxer. v7: Modify for function naming. v8: Combine software ring functions into amdgpu_ring_mux.c v9: Use kernel-doc comment on the get_rptr function. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: fix compiler warning for amdgpu_gfx_cp_init_microcodeLikun Gao
Change the type of parameter on amdgpu_gfx_cp_init_microcode to fix compiler warning. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init CP microcodeLikun Gao
Add an common function to init CP related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfxHawking Zhang
cache rlcv/rlcvp ucode version info in amdgpu_gfx structure Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amdgpu: Document gfx_off members of struct amdgpu_gfxAndré Almeida
Add comments to document gfx_off related members of struct amdgpu_gfx. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd: Add detailed GFXOFF stats to debugfsAndré Almeida
Add debugfs interface to log GFXOFF statistics: - Read amdgpu_gfxoff_count to get the total GFXOFF entry count at the time of query since system power-up - Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to get average GFXOFF residency % multiplied by 100 during the last logging interval. Both features are designed to be keep the values persistent between suspends. Signed-off-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/amdgpu: Enable high priority gfx queueArunpravin Paneer Selvam
Starting from SIENNA CICHLID asic supports two gfx pipes, enabling two graphics queues, 1 on each pipe, pipe0 queue0 would be the normal piority queue and pipe1 queue0 would be the high priority queue Only one queue per pipe is visble to SPI, SPI looks at the priority value assigned to CP_GFX_HQD_QUEUE_PRIORITY from each of the queue's HQD/MQD. Create contexts applying AMDGPU_CTX_PRIORITY_HIGH which submits job to the high priority queue on GFX pipe1. There would be starvation of LP workload if HP workload is always available. v2: - remove unnecessary check(Nirmoy) - make pipe1 hardware support a separate patch(Nirmoy) - remove duplicate code(Shashank) - add CSA support for second gfx pipe(Alex) v3(Christian): - fix incorrect indentation - merge COMPUTE and GFX switch cases as both calls the same function. v4: - rebase w/ latest code base Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-06drm/amdgpu: nuke dynamic gfx scratch reg allocationChristian König
It's over a decade ago that this was actually used for more than ring and IB tests. Just use the static register directly where needed and nuke the now useless infrastructure. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add init support for GFX11 (v2)Hawking Zhang
Add initial support for GC version 11. GC is the graphics and compute block on the GPU. v1: add initial gfx11 support (Wenhui) v2: switch to new amdgpu_gfx_is_high_priority_compute_queue interface (Hawking) v3: fix num_mec (Alex) Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: support imu for gfx11Likun Gao
Add support to initialize imu for gfx v11. IMU is a new power management block for gfx which manages gfx power. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amdgpu: add gmc v11_0 ip block (v3)Tianci.Yin
Add support for GPU memory controller v11. v1: Add support for gmc v11.0 Add gmc 11 block (Tianci) v2: drop unused amdgpu_bo_late_init (Hawking) v3: squash in various fix Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-28drm/amdgpu/discovery: populate additional GC infoAlex Deucher
From the GC info table to the gfx config structure in the driver. The driver will use this data to configure the card correctly. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)Tao Zhou
Add help functions to query and reset RAS UTCL2 poison status. v2: implement it on amdgpu side and kfd only calls it. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in gfx ras ↵yipechai
block Remove redundant calls of amdgpu_ras_block_late_fini in gfx ras block. Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-02drm/amdgpu: Modify .ras_fini function pointer parameteryipechai
Modify .ras_fini function pointer parameter so that we can remove redundant intermediate calls in some ras blocks. Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-17drm/amdgpu: Modify .ras_late_init function pointer parameteryipechai
Modify .ras_late_init function pointer parameter so that it can remove redundant intermediate calls in some ras blocks. Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-14drm/amdgpu: Modify gfx block to fit for the unified ras block data and opsyipechai
1.Modify gfx block to fit for the unified ras block data and ops. 2.Change amdgpu_gfx_ras_funcs to amdgpu_gfx_ras, and the corresponding variable name remove _funcs suffix. 3.Remove the const flag of gfx ras variable so that gfx ras block can be able to be inserted into amdgpu device ras block link list. 4.Invoke amdgpu_ras_register_ras_block function to register gfx ras block into amdgpu device ras block link list. 5.Remove the redundant code about gfx in amdgpu_ras.c after using the unified ras block. 6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of gfx versions. If .ras_late_init and .ras_fini had been defined by the selected gfx version, the defined functions will take effect; if not defined, default fill with amdgpu_gfx_ras_late_init and amdgpu_gfx_ras_fini. Signed-off-by: yipechai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-14drm/amd/pm: do not expose implementation details to other blocks out of powerEvan Quan
Those implementation details(whether swsmu supported, some ppt_funcs supported, accessing internal statistics ...)should be kept internally. It's not a good practice and even error prone to expose implementation details. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amdgpu: detach ring priority from gfx priorityNirmoy Das
Currently AMDGPU_RING_PRIO_MAX is redefinition of a max gfx hwip priority, this won't work well when we will have a hwip with different set of priorities than gfx. Also, HW ring priorities are different from ring priorities. Create a global enum for ring priority levels which each HWIP can use to define its own priority levels. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amdgpu: split gfx callbacks into ras and non-ras onesHawking Zhang
gfx ras is only available in cerntain ip generations. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: John Clements <John.Clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: harvest edc status when connected to host via xGMIDennis Li
When connected to a host via xGMI, system fatal errors may trigger warm reset, driver has no change to query edc status before reset. Therefore in this case, driver should harvest previous error loging registers during boot, instead of only resetting them. v2: 1. IP's ras_manager object is created when its ras feature is enabled, so change to query edc status after amdgpu_ras_late_init called 2. change to enable watchdog timer after finishing gfx edc init Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reivewed-by: Hawking Zhang <hawking.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: enable watchdog feature for SQ of aldebaranDennis Li
SQ's watchdog timer monitors forward progress, a mask of which waves caused the watchdog timeout is recorded into ras status registers and then trigger a system fatal error event. v2: 1. change *query_timeout_status to *query_sq_timeout_status. 2. move query_sq_timeout_status into amdgpu_ras_do_recovery. 3. add module parameters to enable/disable fatal error event and modify the watchdog timer. v3: 1. remove unused parameters of *enable_watchdog_timer Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu: add ras support for gfx of aldebaranDennis Li
add edc counter/status reset and query functions for gfx block of aldebaran. v2: change to clear edc counter explicitly aldebaran hardware will not clear edc counter after driver reading them, so driver should clear them explicitly. Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-09drm/amdgpu: enable only one high prio compute queueNirmoy Das
For high priority compute to work properly we need to enable wave limiting on gfx pipe. Wave limiting is done through writing into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high priority compute queue to avoid race condition between multiple high priority compute queues writing that register simultaneously. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amdgpu: add amdgpu_gfx_state_change_set() set gfx power change entry (v2)Prike Liang
The new amdgpu_gfx_state_change_set() funtion can support set GFX power change status to D0/D3. v2: squash in warning fix (Alex) Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-13drm/amdgpu: fix compute queue priority if num_kcq is less than 4Nirmoy Das
Compute queues are configurable with module param, num_kcq. amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to high priority queue leaving a null drm scheduler in adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5. This patch tries to fix it by alternating compute queue priority between normal and high priority. Fixes: 33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init) Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-16drm/amdgpu: move amdgpu_num_kcq handling to a helperAlex Deucher
Add a helper so we can set per asic default values. Also, the module parameter is currently clamped to 8, but clamp it per asic just in case some asics have different limits in the future. Enable the option on gfx6,7 as well for consistency. Acked-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-15drm/amdgpu: add interface for setting MGCG perfmonEvan Quan
Enable Navi1X MGCG perfmon setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-22drm/amdgpu: update athub interrupt harvesting handleStanley.Yang
GCEA/MMHUB EA error should not result to DF freeze, this is fixed in next generation, but for some reasons the GCEA/MMHUB EA error will result to DF freeze in previous generation, diver should avoid to indicate GCEA/MMHUB EA error as hw fatal error in kernel message by read GCEA/MMHUB err status registers. Changed from V1: make query_ras_error_status function more general make read mmhub er status register more friendly Changed from V2: move ras error status query function into do_recovery workqueue Changed from V3: remove useless code from V2, print GCEA error status instance number Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: add interface amdgpu_gfx_init_spm_golden for Navi1xTianci.Yin
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfiguration is needed. Make the configuration code as an interface for future use. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-20 14:34:43 +0000