| Age | Commit message (Collapse) | Author |
|---|
|
Simplify the code by using lock guards for the bgpio_lock.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250702-gpio-mmio-rework-v2-2-6b77aab684d8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Immutable branch between GPIO, MFD and ARM-SoC for v6.17-rc1
Remove struct bgpio_pdata after converting its users to generic device
properties.
|
|
With no more users, we can now remove struct bgpio_pdata. Move the
relevant bits from bgpio_parse_fw() into bgpio_pdev_probe() while
maintaining the logical ordering (get flags before calling
bgpio_init()).
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-6-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Ahead of removing struct bgpio_pdata support from the gpio-mmio generic
module, let's add support for getting the relevant values from generic
device properties. "label" is a semi-standardized property in some GPIO
drivers so let's go with it. There's no standard "base" property, so
let's use the name "gpio-mmio,base" to tie it to this driver
specifically. The number of GPIOs will be retrieved using
gpiochip_get_ngpios() so there's no need to look it up in the software
node.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-2-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are no more users of the "basic-mmio-gpio-be" platform device ID
in the kernel. We can safely drop it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250701-gpio-mmio-pdata-v2-1-ebf34d273497@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the legacy generic
gpio-reg module to using them. We have to update the two legacy ARM
platforms that use it at the same time as they call the set_multiple()
callbacks directly (they shouldn't but it's old technical debt I
suppose).
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250623-gpiochip-set-rv-gpio-v3-1-90f0e170a846@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
commit 74abd086d2ee ("gpiolib: sanitize the return value of
gpio_chip::get_multiple()") altered the value returned by
gc->get_multiple() in case it is positive (> 0), but failed to return
for other cases (<= 0).
This may result in the "if (gc->get)" block being executed and thus
negates the performance gain that is normally obtained by using
gc->get_multiple().
Fix by returning the result of gc->get_multiple() if it is <= 0.
Also move the "ret" variable to the scope where it is used, which as an
added bonus fixes an indentation error introduced by the aforementioned
commit.
Fixes: 74abd086d2ee ("gpiolib: sanitize the return value of gpio_chip::get_multiple()")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250703191829.2952986-1-hugo@hugovil.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The driver works fine as a module, so allowing building as such. This
adds an exit handler to support module unload.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250702-gpio-palmas-gpio-v4-1-26ba48252f27@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-12-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-11-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-10-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-9-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-8-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-7-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-6-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO core can handle output-only chips that don't implement the get()
and direction_input() callbacks. There's no need to provide dummy
implementations in the driver so drop them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-5-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-4-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-3-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-2-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-1-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO core can handle input-only chips that don't implement the
direction_output() callback at all. There's no need for the driver to
provide a dummy implementation so drop it.
Link: https://lore.kernel.org/r/20250625081222.12744-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-15-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.
Also some register addresses are different.
While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-9-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
It makes no sense for a GPIO descriptor comparator to return true when
the arguments passed to it are NULL or IS_ERR(). Let's validate both and
return false unless both are valid GPIO descriptors.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/all/Z_aFBfjb17JxOwyk@black.fi.intel.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-2-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This function is not meant to modify the GPIO descriptors in any way so
we can safely constify both arguments.
Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-1-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
integers, so they can indicate failures. Convert the driver to using
them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f09a0481fc0ddafb9aa05d903fbb42ef52332c03.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The GPIO core never passes empty bankmasks to the callbacks for handling
multiple signals at once. Remove the superfluous checks, and refactor
the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/29fb200d3f92e79cdd5ce4048d2847c265f337b4.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There's no corresponding platform_get_drvdata() used in this module or
the higher-level gpio-mmio. Let's remove the unneeded call to
platform_set_drvdata().
Link: https://lore.kernel.org/r/20250618074653.25555-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-12-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-11-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-10-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-8-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-7-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-6-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The lines on this chip are input-only. GPIO core can handle the missing
.set() callback so there's no need to implement a dummy here. Drop it.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-5-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-4-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-3-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-2-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-1-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Daniel Sullivan <danieljsullivan7@gmail.com>
Link: https://lore.kernel.org/r/aFdKce3Go9iF4A6m@danv-Standard-PC-Q35-ICH9-2009
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When invoking device_create_with_groups(), its return value is stored
in `data->cdev_base`. However, in case of faiure, `data` is first freed
and then derefernced in order to return `data->cdev_base`.
Fix the use-after-free by extracting the error code before free'ing
`data`.
Fixes: fd19792851db ("gpio: sysfs: remove the mockdev pointer from struct gpio_device")
Addresses-Coverity-ID: 1644512 ("Memory - illegal accesses (USE_AFTER_FREE)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://lore.kernel.org/r/20250622220221.28025-1-antonio@mandelbit.com
[Bartosz: added Fixes: tag, tweaked commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The usage of the mockdev pointer in struct gpio_device is limited to the
GPIO sysfs code. There's no reason to keep it in this top-level
structure. Create a separate structure containing the reference to the
GPIO device and the dummy class device that will be passed to
device_create_with_groups(). The !gdev->mockdev checks can be removed as
long as we make sure that all operations on the GPIO class are protected
with the sysfs lock.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-6-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
No symbols from the linux/idr.h or linux/spinlock.h headers are used in
this file so remove them. We also don't technically need linux/list.h
currently but one of the follow-up commits will start using it so let's
leave it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-5-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Update the code to be more consistent with the rest of the codebase.
Mostly correctly align line-breaks, remove unneeded tabs, stray newlines
& spaces and tweak the comment style.
No functional change.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-4-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
While not critical, it's useful to have the corresponding call to
mutex_destroy() whenever we use mutex_init(). Add the call right before
kfreeing the GPIO data.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-3-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We've converted this driver to using the new GPIO line value setters but
missed the instances where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. The issue needs fixing locally as
well as in the already converted previously users of gpio-mmio.
Fixes: b908d35d0003 ("gpio: mmio: use new GPIO line value setter callbacks")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/2rw2sncevdiyirpdovotztlg77apcq2btzytuv5jnm55aqhlne@swtts3hl53tw/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-2-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We've converted this driver to using the new GPIO line value setters but
missed the instance where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. Fix it.
Fixes: 0e1a8930c941 ("gpio: npcm-sgpio: use new GPIO line value setter callbacks")
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-1-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Immutable tag for the pinctrl tree to pull from
Add the BGPIOF_NO_INPUT to the gpio-mmio API.
|
|
When using bgpio_init with a gpiochip acting as a GPO (output only), the
gpiochip ops `direction_input` was set to `bgpio_simple_dir_in` by
default but we have no input ability.
Adding this flag allows to set a valid ops for the `direction_output`
ops without setting a valid ops for `direction_input` by default.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250613-hdp-upstream-v5-1-6fd6f0dc527c@foss.st.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
