summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2012-11-17mvebu-gpio: Disable blinking when enabling a GPIO for outputJamie Lentin
The plat-orion GPIO driver would disable any pin blinking whenever using a pin for output. Do the same here, as a blinking LED will continue to blink regardless of what the GPIO pin level is. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17gpio: gpio-max710x: Support device tree probingRoland Stigge
For probing via device tree, we need to support the case without platform_data. In this case, chip.base is set to -1 for automatic numbering. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17gpio: twl4030: Use only TWL4030_MODULE_LED for LED configurationPeter Ujfalusi
Avoid using the TWL4030_MODULE_PWMA/B as module ID. The LEDEN, PWMA ON/OFF and PWMB ON/OFF registers are in a continuous range starting from LED base. This is going to be helpful for further cleanup in the twl stack. No functional changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17gpio: tegra: read output value when gpio is set in direction_outLaxman Dewangan
Read the output value when gpio is set for the output mode for gpio_get_value(). Reading input value in direction out does not give correct value. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17gpio: pca953x: Add compatible strings to gpio-pca953x driverMaxime Ripard
Even though the device tree binding code was already written, the compatible strings were not yet in the driver. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17gpio: pca953x: Register an IRQ domainMaxime Ripard
The PCA953x used to register no IRQ domain, which made it impossible to use it as an interrupt-parent from the device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-15ARM: pxa: remove pxa95x supportHaojian Zhuang
PXA95x isn't widely used. And it adds the effort on supporting multiple platform. So remove it. The assumption is that nobody will miss this support. If you are reading this text because you actually require pxa95x support on a new kernel, we can work out a way to revert this patch or add support to the mmp platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-13mfd: Implement tps6586x gpio_to_irqLaxman Dewangan
The TPS6586x adds the interrupt of this device using linear mapping on irq domain. Hence, implement gpio_to_irq to get the irq number corresponding to TPS6586x GPIOs which is created dynamically. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-11gpiolib: separation of pin concernsLinus Walleij
The fact that of_gpiochip_add_pin_range() and gpiochip_add_pin_range() share too much code is fragile and will invariably mean that bugs need to be fixed in two places instead of one. So separate the concerns of gpiolib.c and gpiolib-of.c and have the latter call the former as back-end. This is necessary also when going forward with other device descriptions such as ACPI. This is done by: - Adding a return code to gpiochip_add_pin_range() so we can reliably check whether this succeeds. - Get rid of the custom of_pinctrl_add_gpio_range() from pinctrl. Instead create of_pinctrl_get() to just retrive the pin controller per se from an OF node. This composite function was just begging to be deleted, it was way to purpose-specific. - Use pinctrl_dev_get_name() to get the name of the retrieved pin controller and use that to call back into the generic gpiochip_add_pin_range(). Now the pin range is only allocated and tied to a pin controller from the core implementation in gpiolib.c. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11gpiolib: call pin removal in chip removal functionLinus Walleij
This makes us call gpiochio_remove_pin_ranges() in the gpiochip_remove() function, so we get rid of ranges when freeing the chip. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11gpiolib: remove duplicate pin range codeLinus Walleij
Commit 69e1601bca88809dc118abd1becb02c15a02ec71 "gpiolib: provide provision to register pin ranges" Introduced both of_gpiochip_remove_pin_range() and gpiochip_remove_pin_ranges(). But the contents are exactly the same so remove the OF one and rely on the range deletion in the core. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11gpiolib-of: staticize the pin range callsLinus Walleij
Commit 69e1601bca88809dc118abd1becb02c15a02ec71 "gpiolib: provide provision to register pin ranges" Declared the of_gpiochip_[add|remove]_pin_range() global while they should be static as they are only ever used in this file. Let's convert them to static. Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11gpiolib: fix up function prototypes etcLinus Walleij
Commit 69e1601bca88809dc118abd1becb02c15a02ec71 "gpiolib: provide provision to register pin ranges" Got most of it's function prototypes wrong, so fix this up by: - Moving the void declarations into static inlines in <linux/gpio.h> (previously the actual prototypes were declared here...) - Declare the gpiochip_add_pin_range() and gpiochip_remove_pin_ranges() functions in <asm-generic/gpio.h> together with the pin range struct declaration itself. - Actually only implement these very functions in gpiolib.c if CONFIG_PINCTRL is set. - Additionally export the symbols since modules will need to be able to do this. Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-11gpiolib: provide provision to register pin rangesShiraz Hashim
pinctrl subsystem needs gpio chip base to prepare set of gpio pin ranges, which a given pinctrl driver can handle. This is important to handle pinctrl gpio request calls in order to program a given pin properly for gpio operation. As gpio base is allocated dynamically during gpiochip registration, presently there exists no clean way to pass this information to the pinctrl subsystem. After few discussions from [1], it was concluded that may be gpio controller reporting the pin range it supports, is a better way than pinctrl subsystem directly registering it. [1] http://comments.gmane.org/gmane.linux.ports.arm.kernel/184816 Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> [Edited documentation a bit] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Several build/bug fixes for sparc, including: 1) Configuring a mix of static vs. modular sparc64 crypto modules didn't work, remove an ill-conceived attempt to only have to build the device match table for these drivers once to fix the problem. Reported by Meelis Roos. 2) Make the montgomery multiple/square and mpmul instructions actually usable in 32-bit tasks. Essentially this involves providing 32-bit userspace with a way to use a 64-bit stack when it needs to. 3) Our sparc64 atomic backoffs don't yield cpu strands properly on Niagara chips. Use pause instruction when available to achieve this, otherwise use a benign instruction we know blocks the strand for some time. 4) Wire up kcmp 5) Fix the build of various drivers by removing the unnecessary blocking of OF_GPIO when SPARC. 6) Fix unintended regression wherein of_address_to_resource stopped being provided. Fix from Andreas Larsson. 7) Fix NULL dereference in leon_handle_ext_irq(), also from Andreas Larsson." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix build with mix of modular vs. non-modular crypto drivers. sparc: Support atomic64_dec_if_positive properly. of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq sparc: Add sparc support for platform_get_irq() sparc: Allow OF_GPIO on sparc. qlogicpti: Fix build warning. sparc: Wire up sys_kcmp. sparc64: Improvde documentation and readability of atomic backoff code. sparc64: Use pause instruction when available. sparc64: Fix cpu strand yielding. sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.
2012-11-08gpio: mvebu: Set free callback for gpio_chipAxel Lin
We call pinctrl_request_gpio() in request callback, thus we need to call pinctrl_free_gpio() in free callback. Both mvebu_gpio_request() and mvebu_gpio_free() are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08gpio: tegra: Drop exporting static functionsAxel Lin
Both tegra_gpio_enable() and tegra_gpio_disable() are static functions, it does not make sense to export them. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08gpio: tegra: Staticize non-exported symbolsAxel Lin
Both tegra_gpio_request() and tegra_gpio_free() are not referenced outside of this file, make them static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-08gpio: tegra: fix suspend/resume apisLaxman Dewangan
Following are changes done to fix the suspend/resume functionality of tegra gpio driver: - Protect suspend/resume callbacks with CONFIG_PM_SLEEP because CONFIG_PM doesn't actually enable any of the PM callbacks, it only allows to enable CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. This means if CONFIG_PM is used to protect system sleep callbacks then it may end up unreferenced if only runtime PM is enabled. - Fix the suspend/resume APIs declaration as per callback prototype. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-07gpio: samsung: use pr_* instead of printkJingoo Han
This patch uses pr_* instead of printk. Also, gpio_dbg is replaced with pr_debug. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by/Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-07gpio: samsung: Skip registration if pinctrl driver is present on EXYNOS4X12Tomasz Figa
This patch modifies the Samsung GPIO driver to check for pinctrl driver presence earlier and use generic matching instead of a single compatible value. This allows us to fix warning about unrecognized SoC in case of EXYNOS4X12, which is not supported by this driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-06sparc: Allow OF_GPIO on sparc.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-04gpio-pch: Set parent dev for gpio chipAlexander Stein
This will show the gpio chip as a child node under /sys/bus/pci/devices/xxxx:xx:xx.x/ Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04gpio: em: Fix build errorsAxel Lin
Fix below build errors: CC [M] drivers/gpio/gpio-em.o drivers/gpio/gpio-em.c: In function 'em_gio_probe': drivers/gpio/gpio-em.c:306: error: 'err' undeclared (first use in this function) drivers/gpio/gpio-em.c:306: error: (Each undeclared identifier is reported only once drivers/gpio/gpio-em.c:306: error: for each function it appears in.) drivers/gpio/gpio-em.c:308: error: label 'err3' used but not defined drivers/gpio/gpio-em.c:279: error: label 'err2' used but not defined drivers/gpio/gpio-em.c:265: error: label 'err1' used but not defined drivers/gpio/gpio-em.c:250: error: label 'err0' used but not defined drivers/gpio/gpio-em.c:309: warning: no return statement in function returning non-void drivers/gpio/gpio-em.c: At top level: drivers/gpio/gpio-em.c:311: error: expected identifier or '(' before 'if' drivers/gpio/gpio-em.c:317: error: expected identifier or '(' before 'if' drivers/gpio/gpio-em.c:323: warning: data definition has no type or storage class drivers/gpio/gpio-em.c:323: warning: type defaults to 'int' in declaration of 'ret' drivers/gpio/gpio-em.c:323: error: 'gpio_chip' undeclared here (not in a function) drivers/gpio/gpio-em.c:323: error: initializer element is not constant drivers/gpio/gpio-em.c:324: error: expected identifier or '(' before 'if' drivers/gpio/gpio-em.c:328: error: expected identifier or '(' before 'return' drivers/gpio/gpio-em.c:330: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:332: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:334: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:336: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:338: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:340: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:342: error: expected '=', ',', ';', 'asm' or '__attribute__' before ':' token drivers/gpio/gpio-em.c:344: error: expected identifier or '(' before '}' token drivers/gpio/gpio-em.c: In function 'em_gio_remove': drivers/gpio/gpio-em.c:361: error: implicit declaration of function 'em_gio_irq_domain_cleanup' make[2]: *** [drivers/gpio/gpio-em.o] Error 1 make[1]: *** [drivers/gpio] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-30Merge tag 'gpio-fixes-v3.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - Fix a potential bit wrap issue in the Timberdale driver - Fix up the buffer allocation size in the 74x164 driver - Set the value in direction_output() right in the mvebu driver - Return proper error codes for invalid GPIOs - Fix an off-mode bug for the OMAP - Don't initialize the mask_cach on the mvebu driver * tag 'gpio-fixes-v3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: GPIO: mvebu-gpio: Don't initialize the mask_cache gpio/omap: fix off-mode bug: clear debounce settings on free/reset gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpios gpio: mvebu: correctly set the value in direction_output() gpio-74x164: Fix buffer allocation size gpio-timberdale: fix a potential wrapping issue
2012-10-30GPIO: mvebu-gpio: Don't initialize the mask_cacheAndrew Lunn
Due to the SMP nature of some of the chips, which have per CPU registers, the driver does not use the generic irq_gc_mask_set_bit() & irq_gc_mask_clr_bit() functions, which only support a single register. The driver has its own implementation of these functions, which can pick the correct register depending on the CPU being used. The functions do however use the gc->mask_cache value. The call to irq_setup_generic_chip() was passing IRQ_GC_INIT_MASK_CACHE, which caused the gc->mask_cache to be initialized to the contents of some random register. This resulted in unexpected interrupts been delivered from random GPIO lines. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-27gpio/omap: fix off-mode bug: clear debounce settings on free/resetJon Hunter
This change was originally titled "gpio/omap: fix off-mode bug: clear debounce clock enable mask on free/reset". The title has been updated slightly to reflect (what should be) the final fix. When a GPIO is freed or shutdown, we need to ensure that any debounce settings are cleared and if the GPIO is the only GPIO in the bank that is currently using debounce, then disable the debounce clock as well to save power. Currently, the debounce settings are not cleared on a GPIO free or shutdown and so during a context restore on subsequent off-mode transition, the previous debounce values are restored from the shadow copies (bank->context.debounce*) leading to mismatch state between driver state and hardware state. This was discovered when board code was doing gpio_request_one() gpio_set_debounce() gpio_free() which was leaving the GPIO debounce settings in a confused state. If that GPIO bank is subsequently used with off-mode enabled, bogus state would be restored, leaving GPIO debounce enabled which then prevented the CORE powerdomain from transitioning. To fix this, introduce a new function called _clear_gpio_debounce() to clear any debounce settings when the GPIO is freed or shutdown. If this GPIO is the last debounce-enabled GPIO in the bank, the debounce will also be cut. Please note that we cannot use _gpio_dbck_disable() to disable the debounce clock because this has been specifically created for the gpio suspend path and is intended to shutdown the debounce clock while debounce is enabled. Special thanks to Kevin Hilman for root causing the bug. This fix is a collaborative effort with inputs from Kevin Hilman, Grazvydas Ignotas and Santosh Shilimkar. Testing: - This has been unit tested on an OMAP3430 Beagle board, by requesting a gpio, enabling debounce and then freeing the gpio and checking the register contents, the saved register context and the debounce clock state. - Kevin Hilman tested on 37xx/EVM board which configures GPIO debounce for the ads7846 touchscreen in its board file using the above sequence, and so was failing off-mode tests in dynamic idle. Verified that off-mode tests are passing with this patch. V5 changes: - Corrected author Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Grazvydas Ignotas <notasas@gmail.com> Cc: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-27GPIO: clps711x: use platform_device_unregister in gpio_clps711x_init()Wei Yongjun
platform_device_unregister() only calls platform_device_del() and platform_device_put(), thus use platform_device_unregister() to simplify the code. Also the documents in platform.c shows that platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpio/tc3589x: convert to use the simple irqdomainLinus Walleij
The special checks for whether we have a base IRQ offset or not is surplus if we use the simple IRQ domain. The IRQ offset zero will be interpreted as a linear domain case. Plus this makes sure we allocate descriptors where need be, or warn if they are preallocated with SPARSE_IRQ. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpio/em: convert to linear IRQ domainLinus Walleij
The code in the em driver seems to want to try to do the job of the linear IRQ domain (allocate descriptors and grab a virtual range). So why not just use the linear IRQ domain? The code is now cut down so we don't need isolated functions for this. Also note that we use irq_create_mapping() to make sure descriptors are allocated for these IRQs. Also fixed the FIXME to remove the domain after use. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpio/mvebu: convert to use irq_domain_add_simple()Linus Walleij
The MVEBU driver probably just wants a few IRQs. Using the simple domain has the upside of allocating IRQ descriptors if need be, especially in a SPARSE_IRQ environment. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpio/tegra: convert to use linear irqdomainLinus Walleij
The Tegra driver tries to do the work of irq_domain_add_linear() by reserving a bunch of descriptors somewhere and keeping track of the base offset, then calling irq_domain_add_legacy(). Let's stop doing that and simply use the linear IRQ domain. For this to work: use irq_create_mapping() in the IRQ iterator so that the descriptors get allocated here. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpiolib: unlock on error in gpio_export()Dan Carpenter
We need to unlock here before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpiolib: Don't return -EPROBE_DEFER to sysfs, or for invalid gpiosMathias Nyman
gpios requested with invalid numbers, or gpios requested from userspace via sysfs should not try to be deferred on failure. Cc: stable@kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26gpiolib: add gpio get direction callback supportMathias Nyman
Add .get_direction callback to gpio_chip. This allows gpiolib to check the current direction of a gpio. Used to show the correct gpio direction in sysfs and debug entries. If callback is not set then gpiolib will work as previously; e.g. guessing everything is input until a direction is set. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-26GPIO: clps711x: Fix direction logic for PORTDAlexander Shiyan
PORTD have different direction logic, i.e. "0" is output and "1" is input. This patch fix this issue. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-24GPIO: clps711x: Fix return value for gpio_clps711x_getAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-24gpio: mvebu: correctly set the value in direction_output()Thomas Petazzoni
The ->direction_output() operation of gpio_chip is supposed to set the direction to output but also to set the GPIO to an initial value. Unfortunately, this last part was not done until now, causing for example the LEDs to not be properly set to their default initial value. This patch fixes this by calling the mvebu_gpio_set() function from mvebu_gpio_direction_output() before configuring the GPIO as an output GPIO. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-23gpio: samsung: Fix input mode setting function for GPIO intEunki Kim
This patch makes GPIO pin to INTERRUPT mode or INPUT mode according to bitmap_gpio_int. When the related bit of bitmap_gpio_int is set, it makes GPIO pin to INTERRUPT mode instrad of INPUT mode in the samsung_gpiolib_4bit_input function. Signed-off-by: Eunki Kim <eunki_kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-23gpiolib: Refactor gpio_exportRyan Mallon
The gpio_export function uses nested if statements and the status variable to handle the failure cases. This makes the function logic difficult to follow. Refactor the code to abort immediately on failure using goto. This makes the code slightly longer, but significantly reduces the nesting and number of split lines and makes the code easier to read. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-19GPIO: vt8500: Add extended gpio bank for WM8505/WM8650Tony Prisk
These SoC's have an extended bank of GPIO's seperate to the main GPIO block. This patch adds the additional 5 GPIO's located in this block which control I2C and PWMOUT. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-17gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_typeAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-16gpio-74x164: Fix buffer allocation sizeRoland Stigge
The new registers handling in the gpio-74x164 driver allocates chip->registers * 8 bytes where only one byte per register is necessary. This patch fixes this. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15GPIO: Add support for GPIO on CLPS711X-target platformAlexander Shiyan
The CLPS711X CPUs provide some GPIOs for use in the system. This driver provides support for these via gpiolib. Due to platform limitations, driver does not support interrupts, only inputs and outputs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15DA9055 GPIO driverAshish Jangam
This is the GPIO patch for the DA9055 PMIC. This patch has got dependency on the DA9055 MFD core. This patch is functionally tested on SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15gpio/gpio-omap: Use existing pointer to struct deviceTobias Klauser
A pointer to "pdev->dev" is already stored in "dev", so use it in devm_kzalloc. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15gpio/gpio-pl061: Covert to use devm_* functionsTobias Klauser
Use the devm_* family of functions during probe to reduce the error handling code footprint. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-15gpio-timberdale: fix a potential wrapping issueDan Carpenter
->last_ier is an unsigned long but the high bits can't be used int the original code because the shift wraps. Cc: stable@kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
2012-10-07Merge tag 'soc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 19:47:00 +0000