summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2017-04-07gpio: arizona: Correct handling for reading input GPIOsCharles Keepax
The GPIO register is cached since all the configuration resides within it, however, this means for input GPIOs the driver will not return the actual state but the last value written to the register cache. To correct this in the case of reading an input GPIO resume the CODEC and drop the cache for the input register to ensure an actual hardware read takes place. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-30ACPI / gpio: do not fall back to parsing _CRS when we get a deferralDmitry Torokhov
If, while locating GPIOs by name, we get probe deferral, we should immediately report it to caller rather than trying to fall back to parsing unnamed GPIOs from _CRS block. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-and-Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-30gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake setHans de Goede
On Bay Trail / Cherry Trail systems with a LID switch, the LID switch is often connect to a gpioint handled by an _IAE event handler. Before this commit such systems would not wake up when opening the lid, requiring the powerbutton to be pressed after opening the lid to wakeup. Note that Bay Trail / Cherry Trail systems use suspend-to-idle, so the interrupts are generated anyway on those lines on lid switch changes, but they are treated by the IRQ subsystem as spurious while suspended if not marked as wakeup IRQs. This commit calls enable_irq_wake() for _IAE GpioInts with a valid event handler which have their Wake flag set. This fixes such systems not waking up when opening the lid. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28gpio: 104-idi-48: make use of raw_spinlock variantsJulia Cartwright
The 104-idi-48 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28gpio: pci-idio-16: make use of raw_spinlock variantsJulia Cartwright
The pci-idio-16 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-28gpio: 104-idio-16: make use of raw_spinlock variantsJulia Cartwright
The 104-idio-16 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-27Merge 4.11-rc4 into char-misc-nextGreg Kroah-Hartman
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24gpio: gpio-reg: add irq mapping for gpio-reg usersRussell King
Add support for mapping gpio-reg gpios to interrupts. This may be a non-linear mapping - some gpios in the register may not even have corresponding interrupts associated with them, so we need to pass an array. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24gpio: add generic single-register fixed-direction GPIO driverRussell King
Add a simple, generic, single register fixed-direction GPIO driver. This is able to support a single register with a mixture of inputs and outputs. This is different from gpio-mmio and gpio-74xx-mmio: * gpio-mmio doesn't allow a fixed direction, it assumes there is always a direction register. * gpio-74xx-mmio only supports all-in or all-out setups * gpio-74xx-mmio is DT only, this needs to support legacy too * they don't double-read when getting the GPIO value, as required by some implementations that this driver supports * we need to always do 32-bit reads, which bgpio doesn't guarantee * the current output state may not be readable from the hardware register - reading may reflect input status but not output status. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24gpio: sa1100: implement get_direction methodRussell King
Allow gpiolib to read back the current IO direction configuration by implementing the .get_direction callback. This, in part, allows debugfs to report the complete true hardware state rather than the software state. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24gpio: sa1100: convert to use IO accessorsRussell King
Use IO accessors to access the SA1100 registers rather than accessing them directly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-24gpio: sa1100: use sa11x0_gpio_set_wake()Russell King
Use sa11x0_gpio_set_wake() to set the PWER register, as provided by Dmitry some time back. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: merrifield: Don't use GPIOF_DIR_IN / GPIOF_DIR_OUTAndy Shevchenko
The mentioned flags are dedicated solely for consumer API. Replace them by explicit values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Made a !bang clamp to (0,1) instead of infix ? operator] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: wm831x: Add basic device tree supportCharles Keepax
Now the wm831x-core has basic DT support we can update this driver to allow use of the GPIOs within a device tree system. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-03-23gpio: pca953x: Expand comment for "reset" GPIO in ACPI caseAndy Shevchenko
GPIO ACPI library is going to be stricter about resources, thus, expand comment regarding "reset" GPIO resource in this driver to clarify its usage in ACPI case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Sort headers alphabeticallyAndy Shevchenko
For sake of better maintenance sort the headers by alphabetical order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Introduce a long awaited ->get_direction()Andy Shevchenko
Introduce ->get_direction() callback for the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Removed use of GPIOF_DIR* flags] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: mvebu: use BIT macro instead of bit shiftingRalph Sennhauser
Use the BIT macro instead of explicitly shifting bits for some added clarity. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: mmio: add support for NI 169445 NAND GPIONathan Sullivan
The GPIO-based NAND controller on National Instruments 169445 hardware exposes a set of simple lines for the control signals. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-22gpio: moxart: Switch to using the FTGPIO010 driverLinus Walleij
This just deletes the Moxa ART driver and replaces it with the more versatile Faraday FTGPIO010 driver. Make this default on for ARCH_GEMINI and ARCH_MOXART so we do not get Kconfig glitches. Tested-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-22gpio: gemini: rename to match Faraday IPLinus Walleij
The Gemini driver is actually a driver for the Faraday Technology FTGPIO010 IP block. We rename the driver and the Kconfig symbol and put in a a new compatible string for the Moxa ART SoC that is also using this IP block. Tested-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-21gpiolib: utilize new cdev_device_add helper functionLogan Gunthorpe
Replace the open coded registration of the cdev and dev with the new device_add_cdev() helper. The helper replaces a common pattern by taking the proper reference against the parent device and adding both the cdev and the device. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17gpio:mcp23s08 Fixed missing interruptsRobert Middleton
When an interrupt occurs on an MCP23S08 chip, the INTF register will only contain one bit as causing the interrupt. If more than two pins change at the same time on the chip, this causes one of the pins to not be reported. This patch fixes the logic for checking if a pin has changed, so that multiple pins will always cause more than one change. Cc: stable@vger.kernel.org Signed-off-by: Robert Middleton <robert.middleton@rm5248.com> Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: let the compiler inlineRalph Sennhauser
A modern compiler should know better when to inline, so drop the inline keywords. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: extra whitespace fixesRalph Sennhauser
Fix whitespace errors missed by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: whitespace fixesRalph Sennhauser
Fix whitespace errors reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: unsigned int fixesRalph Sennhauser
Use unsigned int instead of plain unsigned as reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: start multiline block comments with blank lineRalph Sennhauser
While this isn't an issue according to checkpatch two styles are used. Add a blank line to the block comments missing a blank line at the start so multiline block comments look the same across the file. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: mvebu: checkpatch: block comment fixesRalph Sennhauser
Fix issues in block comments reported by checkpatch. Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: acpi: Ignore -EPROBE_DEFER for unselected gpiointsHans de Goede
When acpi_dev_gpio_irq_get gets called with an index of say 2, it should not care if acpi_get_gpiod for index 0 or 1 returns -EPROBE_DEFER. This allows drivers which request a gpioint with index > 0 to function if there is no gpiochip driver (loaded) for gpioints with a lower index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: of: Don't return 0 on dt_gpio_count()Andy Shevchenko
It's unusual to have error checking like (ret <= 0) in cases when counting GPIO resources. In case when it's mandatory we propagate the error (-ENOENT), otherwise we don't use the result. This makes consistent behaviour across all possible variants called in gpiod_count(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: acpi: Don't return 0 on acpi_gpio_count()Andy Shevchenko
It's unusual to have error checking like (ret <= 0) in cases when counting GPIO resources. In case when it's mandatory we propagate the error (-ENOENT), otherwise we don't use the result. This makes consistent behaviour across all possible variants called in gpiod_count(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: xlp: Update for ARCH_THUNDER2Jayachandran C
ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be the next revision of this platform. Update compile dependencies and ACPI ID to reflect this change. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> [Drop depreciation of ARCH_VULCAN] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: zx: make use of raw_spinlock variantsJulia Cartwright
The zx gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: ws16c48: make use of raw_spinlock variantsJulia Cartwright
The ws16c48 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: pl061: make use of raw_spinlock variantsJulia Cartwright
The pl061 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: etraxfs: make use of raw_spinlock variantsJulia Cartwright
The etraxfs gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: ath79: make use of raw_spinlock variantsJulia Cartwright
The ath79 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Aban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: bcm-kona: make use of raw_spinlock variantsJulia Cartwright
The bcm-kona gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: 104-dio-48e: make use of raw_spinlock variantsJulia Cartwright
The 104-dio-48e gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: altera: make use of raw_spinlock variantsJulia Cartwright
The altera gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: pc104: Mask PC/104 drivers via PC104 Kconfig optionWilliam Breathitt Gray
PC/104 drivers should be hidden on machines which do not support PC/104 devices. This patch adds the PC104 Kconfig option as a dependency for the relevant PC/104 device driver Kconfig options. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: sta2x11: use resource management for irqsBartosz Golaszewski
Use device resource managed variants of irq_alloc_descs() and request_irq() and remove the code manually freeing irq resources. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: mxs: use devm_irq_alloc_descs()Bartosz Golaszewski
This driver never frees the interrupt descriptors it allocates. Fix it by using the resource managed version of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: mxc: use devm_irq_alloc_descs()Bartosz Golaszewski
This driver never frees the interrupt descriptors it allocates. Fix it by using the resource managed version of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: sodaville: use resource management for irqsBartosz Golaszewski
Use device resource managed variants of irq_alloc_descs() and request_irq() and remove the code manually freeing irq resources. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: davinci: use devm_irq_alloc_descs()Bartosz Golaszewski
This driver never frees the interrupt descriptors it allocates. Fix it by using the resource managed version of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: pxa: use devm_irq_alloc_descs()Bartosz Golaszewski
This driver never frees the interrupt descriptors it allocates. Fix it by using the resource managed version of irq_alloc_descs(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: xlp: use resource management for irqsBartosz Golaszewski
Use the resource managed variant of irq_alloc_descs() and remove the code manually freeing allocated interrupt descriptors. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-15gpio: ml-ioh: use resource management for irqsBartosz Golaszewski
Use device resource managed variants of irq_alloc_descs() and request_irq() and remove the code manually freeing irq resources. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 05:00:58 +0000