summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)Author
2020-11-30firmware: imx: scu-pd: Add video0/1 power domains support for i.MX8qxp DC0 ↵Liu Ying
subsystem This patch adds video0/1 power domains support for i.MX8qxp DC0 subsystem. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-30Merge 5.10-rc6 into char-misc-nextGreg Kroah-Hartman
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-29Merge tag 'efi-urgent-for-v5.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "More EFI fixes forwarded from Ard Biesheuvel: - revert efivarfs kmemleak fix again - it was a false positive - make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does not pull in other dependencies unnecessarily if CONFIG_EFI is not set - defer attempts to load SSDT overrides from EFI vars until after the efivar layer is up" * tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: EFI_EARLYCON should depend on EFI efivarfs: revert "fix memory leak in efivarfs_create()" efi/efivars: Set generic ops before loading SSDT
2020-11-27Merge tag 'scmi-updates-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates for v5.11 Two main additions this time: 1. Support for SCMI v3.0 sensor extensions 2. Support for voltage domain management protocol added newly to SCMI v3.0 * tag 'scmi-updates-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove residual _le structs naming firmware: arm_scmi: Add SCMI v3.0 sensor notifications firmware: arm_scmi: Add SCMI v3.0 sensor configuration support firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads hwmon: (scmi) Update hwmon internal scale data type firmware: arm_scmi: Add support to enumerated SCMI voltage domain device firmware: arm_scmi: Add voltage domain management protocol support dt-bindings: arm: Add support for SCMI Regulators firmware: arm_scmi: Add SCMI v3.0 sensors descriptors extensions firmware: arm_scmi: Add full list of sensor type enumeration firmware: arm_scmi: Rework scmi_sensors_protocol_init firmware: arm_scmi: Fix missing destroy_workqueue() Link: https://lore.kernel.org/r/20201124122412.22386-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27Backmerge tag 'v5.10-rc2' into arm/driversArnd Bergmann
The SCMI pull request for the arm/drivers branch requires v5.10-rc2 because of dependencies with other git trees, so merge that in here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-25efi: EFI_EARLYCON should depend on EFIGeert Uytterhoeven
CONFIG_EFI_EARLYCON defaults to yes, and thus is enabled on systems that do not support EFI, or do not have EFI support enabled, but do satisfy the symbol's other dependencies. While drivers/firmware/efi/ won't be entered during the build phase if CONFIG_EFI=n, and drivers/firmware/efi/earlycon.c itself thus won't be built, enabling EFI_EARLYCON does force-enable CONFIG_FONT_SUPPORT and CONFIG_ARCH_USE_MEMREMAP_PROT, and CONFIG_FONT_8x16, which is undesirable. Fix this by making CONFIG_EFI_EARLYCON depend on CONFIG_EFI. This reduces kernel size on headless systems by more than 4 KiB. Fixes: 69c1f396f25b805a ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201124191646.3559757-1-geert@linux-m68k.org Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-11-25efi/efivars: Set generic ops before loading SSDTAmadeusz Sławiński
Efivars allows for overriding of SSDT tables, however starting with commit bf67fad19e493b ("efi: Use more granular check for availability for variable services") this use case is broken. When loading SSDT generic ops should be set first, however mentioned commit reversed order of operations. Fix this by restoring original order of operations. Fixes: bf67fad19e493b ("efi: Use more granular check for availability for variable services") Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20201123172817.124146-1-amadeuszx.slawinski@linux.intel.com Tested-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-11-24firmware: xilinx: Use hash-table for api feature checkAmit Sunil Dhamne
Currently array of fix length PM_API_MAX is used to cache the pm_api version (valid or invalid). However ATF based PM APIs values are much higher then PM_API_MAX. So to include ATF based PM APIs also, use hash-table to store the pm_api version status. Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ravi Patel <ravi.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Michal Simek <michal.simek@xilinx.com> Fixes: f3217d6f2f7a ("firmware: xilinx: fix out-of-bounds access") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-24firmware: xilinx: Fix SD DLL node reset issueManish Narani
Fix the SD DLL node reset issue where incorrect node is being referenced instead of SD DLL node. Fixes: 426c8d85df7a ("firmware: xilinx: Use APIs instead of IOCTLs") Signed-off-by: Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1605534744-15649-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-23Merge tag 'scmi-voltage-5.11' of ↵Sudeep Holla
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into for-next/scmi SCMI voltage domain management protocol support for v5.11 SCMI v3.0 voltage domain protocol support to discover the voltage levels supported by the domains and to set/get the configuration and voltage level of any given domain. * tag 'scmi-voltage-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Add support to enumerated SCMI voltage domain device firmware: arm_scmi: Add voltage domain management protocol support dt-bindings: arm: Add support for SCMI Regulators
2020-11-23firmware: arm_scmi: Remove residual _le structs namingCristian Marussi
For sake of consistency, remove any residual naming based on _le suffixes in SCMI sensors protocol, since little endianness is already assumed across all of SCMI implementation and, as such, all currently existent names do not explicitly state their endianness. No functional change. Link: https://lore.kernel.org/r/20201123162008.35814-1-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-22firmware: arm_scmi: Add SCMI v3.0 sensor notificationsCristian Marussi
Add support for new SCMI v3.0 SENSOR_UPDATE notification. Link: https://lore.kernel.org/r/20201119174906.43862-7-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-22firmware: arm_scmi: Add SCMI v3.0 sensor configuration supportCristian Marussi
Add SCMI v3.0 sensor support for CONFIG_GET/CONFIG_SET commands. Link: https://lore.kernel.org/r/20201119174906.43862-6-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-22firmware: arm_scmi: Add SCMI v3.0 sensors timestamped readsCristian Marussi
Add new .reading_get_timestamped() method to sensor_ops to support SCMI v3.0 timestamped reads. Link: https://lore.kernel.org/r/20201119174906.43862-5-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-21x86/mce, cper: Pass x86 CPER through the MCA handling chainSmita Koralahalli
The kernel uses ACPI Boot Error Record Table (BERT) to report fatal errors that occurred in a previous boot. The MCA errors in the BERT are reported using the x86 Processor Error Common Platform Error Record (CPER) format. Currently, the record prints out the raw MSR values and AMD relies on the raw record to provide MCA information. Extract the raw MSR values of MCA registers from the BERT and feed them into mce_log() to decode them properly. The implementation is SMCA-specific as the raw MCA register values are given in the register offset order of the SMCA address space. [ bp: Massage. ] [ Fix a build breakage in patch v1. ] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20201119182938.151155-1-Smita.KoralahalliChannabasappa@amd.com
2020-11-20firmware: arm_scmi: Add support to enumerated SCMI voltage domain deviceCristian Marussi
Add SCMI voltage domain device name to the core list of supported protocol devices so that it can be enumerated if the firmware supports it. Link: https://lore.kernel.org/r/20201119191051.46363-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-20firmware: arm_scmi: Add voltage domain management protocol supportCristian Marussi
SCMI v3.0 introduces voltage domain protocol which provides commands to: - Discover the voltage levels supported by a domain - Get the configuration and voltage level of a domain - Set the configuration and voltage level of a domain Let us add support for the same. Link: https://lore.kernel.org/r/20201119191051.46363-2-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-20firmware: arm_scmi: Add SCMI v3.0 sensors descriptors extensionsCristian Marussi
Add support for new SCMI v3.0 Sensors extensions related to new sensors' features, like multiple axis and update intervals, while keeping compatibility with SCMI v2.0 features. While at that, refactor and simplify all the internal helpers macros and move struct scmi_sensor_info to use only non-fixed-size typing. Link: https://lore.kernel.org/r/20201119174906.43862-3-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-20firmware: arm_scmi: Rework scmi_sensors_protocol_initCristian Marussi
Properly handle return values from initialization helpers and avoid setting sensor_ops before sensor_priv. Link: https://lore.kernel.org/r/20201119174906.43862-2-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-20crypto: sha - split sha.h into sha1.h and sha2.hEric Biggers
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2, and <crypto/sha3.h> contains declarations for SHA-3. This organization is inconsistent, but more importantly SHA-1 is no longer considered to be cryptographically secure. So to the extent possible, SHA-1 shouldn't be grouped together with any of the other SHA versions, and usage of it should be phased out. Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and <crypto/sha2.h>, and make everyone explicitly specify whether they want the declarations for SHA-1, SHA-2, or both. This avoids making the SHA-1 declarations visible to files that don't want anything to do with SHA-1. It also prepares for potentially moving sha1.h into a new insecure/ or dangerous/ directory. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-17efi: x86/xen: switch to efi_get_secureboot_mode helperArd Biesheuvel
Now that we have a static inline helper to discover the platform's secure boot mode that can be shared between the EFI stub and the kernel proper, switch to it, and drop some comments about keeping them in sync manually. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-11-16firmware: imx-dsp: Export functions to request/free channelsDaniel Baluta
In order to save power, we only need to request a channel when the communication with the DSP active. For this we export the following functions: - imx_dsp_request_channel, gets a channel with a given index - imx_dsp_free_channel, frees a channel with a given index Notice that we still request channels at probe to support devices that do not have PM callbacks implemented. More explanations about why requesting a channel has an effect on power savings: - requesting an mailbox channel will call mailbox's startup function. - startup function calls pm_runtime_get_sync which increments device usage count and will keep the device active. Specifically, mailbox clock will be always ON when a mailbox channel is requested. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16firmware: imx: Save channel name for further useDaniel Baluta
We want to request / free channels on demand later in order to save power. For this for each channel we save the name and use it to reference the channel later. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16firmware: imx: Introduce imx_dsp_setup_channelsDaniel Baluta
Create a separate function that sets up DSP mailbox channels so that imx_dsp_probe function will be easier to read. Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16firmware: imx: scu-pd: Add power domains for imx-jpegMirela Rabulea
The power domains are for imx8qxp/imx8qm JPEG encoder & decoder. Each has 4 slots and a wrapper. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16Merge 5.10-rc4 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-14firmware: fix spelling typo of 'wtih'Wang Qing
wtih -> with Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604737181-14464-1-git-send-email-wangqing@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13firmware: arm_scmi: Fix missing destroy_workqueue()Qinglang Miao
destroy_workqueue is required before the return from scmi_notification_init in case devm_kcalloc fails to allocate registered_protocols. Fix this by simply moving registered_protocols allocation before alloc_workqueue. Link: https://lore.kernel.org/r/20201110074221.41235-1-miaoqinglang@huawei.com Fixes: bd31b249692e ("firmware: arm_scmi: Add notification dispatch and delivery") Suggested-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2020-11-10firmware: tegra: fix strncpy()/strncat() confusionArnd Bergmann
The way that bpmp_populate_debugfs_inband() uses strncpy() and strncat() makes no sense since the size argument for the first is insufficient to contain the trailing '/' and the second passes the length of the input rather than the output, which triggers a warning: In function 'strncat', inlined from 'bpmp_populate_debugfs_inband' at ../drivers/firmware/tegra/bpmp-debugfs.c:422:4: include/linux/string.h:289:30: warning: '__builtin_strncat' specified bound depends on the length of the source argument [-Wstringop-overflow=] 289 | #define __underlying_strncat __builtin_strncat | ^ include/linux/string.h:367:10: note: in expansion of macro '__underlying_strncat' 367 | return __underlying_strncat(p, q, count); | ^~~~~~~~~~~~~~~~~~~~ drivers/firmware/tegra/bpmp-debugfs.c: In function 'bpmp_populate_debugfs_inband': include/linux/string.h:288:29: note: length computed here 288 | #define __underlying_strlen __builtin_strlen | ^ include/linux/string.h:321:10: note: in expansion of macro '__underlying_strlen' 321 | return __underlying_strlen(p); Simplify this to use an snprintf() instead. Fixes: 5e37b9c137ee ("firmware: tegra: Add support for in-band debug") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-11-09firmware: gsmi: Drop the use of dma_pool_* API functionsFurquan Shaikh
GSMI driver uses dma_pool_* API functions for buffer allocation because it requires that the SMI buffers are allocated within 32-bit physical address space. However, this does not work well with IOMMU since there is no real device and hence no domain associated with the device. Since this is not a real device, it does not require any device address(IOVA) for the buffer allocations. The only requirement is to ensure that the physical address allocated to the buffer is within 32-bit physical address space. This is because the buffers have nothing to do with DMA at all. It is required for communication with firmware executing in SMI mode which has access only to the bottom 4GiB of memory. Hence, this change switches to using a SLAB cache created with SLAB_CACHE_DMA32 that guarantees that the allocation happens from the DMA32 memory zone. All calls to dma_pool_* are replaced with kmem_cache_*. In addition to that, all the code for managing the dma_pool for GSMI platform device is dropped. Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20201022071550.1192947-1-furquan@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09firmware: xilinx: fix out-of-bounds accessArnd Bergmann
The zynqmp_pm_set_suspend_mode() and zynqmp_pm_get_trustzone_version() functions pass values as api_id into zynqmp_pm_invoke_fn that are beyond PM_API_MAX, resulting in an out-of-bounds access: drivers/firmware/xilinx/zynqmp.c: In function 'zynqmp_pm_set_suspend_mode': drivers/firmware/xilinx/zynqmp.c:150:24: warning: array subscript 2562 is above array bounds of 'u32[64]' {aka 'unsigned int[64]'} [-Warray-bounds] 150 | if (zynqmp_pm_features[api_id] != PM_FEATURE_UNCHECKED) | ~~~~~~~~~~~~~~~~~~^~~~~~~~ drivers/firmware/xilinx/zynqmp.c:28:12: note: while referencing 'zynqmp_pm_features' 28 | static u32 zynqmp_pm_features[PM_API_MAX]; | ^~~~~~~~~~~~~~~~~~ Replace the resulting undefined behavior with an error return. This may break some things that happen to work at the moment but seems better than randomly overwriting kernel data. I assume we need additional fixes for the two functions that now return an error. Fixes: 76582671eb5d ("firmware: xilinx: Add Zynqmp firmware driver") Fixes: e178df31cf41 ("firmware: xilinx: Implement ZynqMP power management APIs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026155449.3703142-1-arnd@kernel.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-04efi: generalize efi_get_securebootChester Lin
Generalize the efi_get_secureboot() function so not only efistub but also other subsystems can use it. Note that the MokSbState handling is not factored out: the variable is boot time only, and so it cannot be parameterized as easily. Also, the IMA code will switch to this version in a future patch, and it does not incorporate the MokSbState exception in the first place. Note that the new efi_get_secureboot_mode() helper treats any failures to read SetupMode as setup mode being disabled. Co-developed-by: Chester Lin <clin@suse.com> Signed-off-by: Chester Lin <clin@suse.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-11-01firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_opsPeter Ujfalusi
The ringacc driver has been converted to use the new set_cfg function to configure the ring, the old config ops can be removed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: rm: Add new ops for ring configurationPeter Ujfalusi
The sysfw ring configuration message has been extended to include virtid and asel value for the ring. Add the ASEL_VALID to TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER as it is required for DMA rings. Instead of extending the current .config() ops - which would need same patch change in the ringacc driver - add ti_sci_msg_rm_ring_cfg struct and a new ops using it to configure the ring. This will allow easy update path in case new members are added for the ring configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: rm: Remove ring_get_config supportPeter Ujfalusi
The ring_get_cfg (0x1111 message) is not used and it is not supported by sysfw for a long time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: rm: Add support for extended_ch_type for tx channelPeter Ujfalusi
Sysfw added 'extended_ch_type' to the tx_ch_cfg_req message which should be used when BCDMA block copy channels are configured: extended_ch_type = 0 : the channel is split tx channel (tchan) extended_ch_type = 1 : the channel is block copy channel (bchan) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: rm: Add support for second resource rangePeter Ujfalusi
Sysfw added support for a second range in the resource range API to be able to describe complex allocations mainly for DMA channels. Update the ti_sci part to consider the second range as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: Use struct ti_sci_resource_desc in get_range opsPeter Ujfalusi
Use the ti_sci_resource_desc directly and update it's start and num members directly instead of requiring individual parameters for them. This will allow easy extension of the RM parameters without changing API. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-11-01firmware: ti_sci: rm: Add support for tx_tdtype parameter for tx channelPeter Ujfalusi
The system controller's resource manager have support for configuring the TDTYPE of TCHAN_CFG register on j721e. With this parameter the teardown completion can be controlled: TDTYPE == 0: Return without waiting for peer to complete the teardown TDTYPE == 1: Wait for peer to complete the teardown Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-10-29efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yesGeert Uytterhoeven
EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is deprecated, so it should not be enabled by default. In light of commit 4da0b2b7e67524cc ("efi/libstub: Re-enable command line initrd loading for x86"), keep the default for X86. Fixes: cf6b83664895a5c7 ("efi/libstub: Make initrd file loader configurable") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201028153402.1736103-1-geert+renesas@glider.be Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-28firmware/dmi: Include product_sku info to modaliasKai-Chuan Hsieh
Some Dell platforms rely on modalias to customize configuration, the product sku can be more specific for the hardware. Add product_sku to modalias for better utilization. Signed-off-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2020-10-26firmware: meson-sm: enable build as moduleKevin Hilman
Enable secure module driver as module. Default remains built-in. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2020-10-26Merge tag 'scmi-fixes-5.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.10 Handful of fixes, some of them fixing issues since SCMI was merged. It indicates that it is getting used now and people are finding bugs. Fixes include unblocking multiple thread access with SMC/HVC transport, ARCH_COLD_RESET value, locking in notifications, avoiding workqueue name duplication with multiple instances of SCMI and adding missing Rx size initialisation when using buffers for repeat transmits. * tag 'scmi-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications firmware: arm_scmi: Add missing Rx size re-initialisation firmware: arm_scmi: Expand SMC/HVC message pool to more than one firmware: arm_scmi: Fix ARCH_COLD_RESET Link: https://lore.kernel.org/r/20201015123518.GA3839@bogus Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()Arvind Sankar
The image_size argument to efi_relocate_kernel() is currently specified as init_size, but this is unnecessarily large. The compressed kernel is much smaller, in fact, its image only extends up to the start of _bss, since at this point, the .bss section is still uninitialized. Depending on compression level, this can reduce the amount of data copied by 4-5x. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20201011142012.96493-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-21Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT
2020-10-19Merge tag 'riscv-for-linus-5.10-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of cleanups and new features: - A handful of cleanups for our page fault handling - Improvements to how we fill out cacheinfo - Support for EFI-based systems" * tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits) RISC-V: Add page table dump support for uefi RISC-V: Add EFI runtime services RISC-V: Add EFI stub support. RISC-V: Add PE/COFF header for EFI stub RISC-V: Implement late mapping page table allocation functions RISC-V: Add early ioremap support RISC-V: Move DT mapping outof fixmap RISC-V: Fix duplicate included thread_info.h riscv/mm/fault: Set FAULT_FLAG_INSTRUCTION flag in do_page_fault() riscv/mm/fault: Fix inline placement in vmalloc_fault() declaration riscv: Add cache information in AUX vector riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO riscv: Set more data to cacheinfo riscv/mm/fault: Move access error check to function riscv/mm/fault: Move FAULT_FLAG_WRITE handling in do_page_fault() riscv/mm/fault: Simplify mm_fault_error() riscv/mm/fault: Move fault error handling to mm_fault_error() riscv/mm/fault: Simplify fault error handling riscv/mm/fault: Move vmalloc fault handling to vmalloc_fault() riscv/mm/fault: Move bad area handling to bad_area() ...
2020-10-16Merge tag 'mips_5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
2020-10-15Merge branch 'parisc-5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - Added fw_cfg support for parisc on qemu - Added font support in sti text console driver for byte- and word-mode ROMs - Switch to more fine grained lws locks and improve spinlock handling - Add ioread64_hi_lo() and iowrite64_hi_lo() to avoid 0-day linking errors - Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() to help compiler - Header file cleanups, mostly removal of unused HP-UX compat defines - Drop one bit from our O_NONBLOCK define to become now 000200000 - Add MAP_UNINITIALIZED define to avoid userspace compile errors - Drop CONFIG_IDE from defconfigs - Speed up synchronize_caches() on UP machines - Rewrite tlb flush threshold calculation - Comment fixes and cleanups * 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/sticon: Add user font support parisc/sticon: Always register sticon console driver parisc: Add MAP_UNINITIALIZED define parisc: Improve spinlock handling parisc: Install vmlinuz instead of zImage file parisc: Rewrite tlb flush threshold calculation parisc: Switch to more fine grained lws locks parisc: Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() parisc: Fix comments and enable interrupts later parisc: Add alternative patching to synchronize_caches define parisc: Add ioread64_hi_lo() and iowrite64_hi_lo() parisc: disable CONFIG_IDE in defconfigs parisc: Drop useless comments in uapi/asm/signal.h parisc: Define O_NONBLOCK to become 000200000 parisc: Drop HP-UX specific fcntl and signal flags parisc: Avoid external interrupts when IPI finishes parisc: Add qemu fw_cfg interface fw_cfg: Add support for parisc architecture
2020-10-15Merge tag 'usb-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:50:29 +0000