summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2023-04-12dmaengine: idxd: add per DSA wq workqueue for processing cr faultsDave Jiang
Add a workqueue for user submitted completion record fault processing. The workqueue creation and destruction lifetime will be tied to the user sub-driver since it will only be used when the wq is a user type. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-7-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmanegine: idxd: add debugfs for event log dumpDave Jiang
Add debugfs entry to dump the content of the event log for debugging. The function will dump all non-zero entries in the event log. It will note which entries are processed and which entries are still pending processing at the time of the dump. The entries may not always be in chronological order due to the log is a circular buffer. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-6-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: add interrupt handling for event logDave Jiang
An event log interrupt is raised in the misc interrupt INTCAUSE register when an event is written by the hardware. Add basic event log processing support to the interrupt handler. The event log is a ring where the hardware owns the tail and the software owns the head. The hardware will advance the tail index when an additional event has been pushed to memory. The software will process the log entry and then advances the head. The log is full when (tail + 1) % log_size = head. The hardware will stop writing when the log is full. The user is expected to create a log size large enough to handle all the expected events. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-5-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: setup event log configurationDave Jiang
Add setup of event log feature for supported device. Event log addresses error reporting that was lacking in gen 1 DSA devices where a second error event does not get reported when a first event is pending software handling. The event log allows a circular buffer that the device can push error events to. It is up to the user to create a large enough event log ring in order to capture the expected events. The evl size can be set in the device sysfs attribute. By default 64 entries are supported as minimal when event log is enabled. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-4-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: add event log size sysfs attributeDave Jiang
Add support for changing of the event log size. Event log is a feature added to DSA 2.0 hardware to improve error reporting. It supersedes the SWERROR register on DSA 1.0 hardware and hope to prevent loss of reported errors. The error log size determines how many error entries supported for the device. It can be configured by the user via sysfs attribute. Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: idxd: make misc interrupt one shotDave Jiang
Current code continuously processes the interrupt as long as the hardware is setting the status bit. There's no reason to do that since the threaded handler will get called again if another interrupt is asserted. Also through testing, it has shown that if a misprogrammed (or malicious) agent can continuously submit descriptors with bad completion record and causes errors to be reported via the misc interrupt. Continuous processing by the thread can cause software hang watchdog to kick off since the thread isn't giving up the CPU. Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com> Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230407203143.2189681-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: align declaration of ret with the rest of variablesClaudiu Beznea
Align the declaration of ret in atmel_xdmac_resume() with the rest of variables. Do this by adding ret to the line with declaration for i variable. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-8-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: add a warning message regarding for unpaused channelsClaudiu Beznea
Add a warning message on suspend to let the user that there are channels not paused by their consumers. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-7-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: do not enable all cyclic channelsClaudiu Beznea
Do not global enable all the cyclic channels in at_xdmac_resume(). Instead save the global status in at_xdmac_suspend() and re-enable the cyclic channel only if it was active before suspend. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: restore the content of grws registerClaudiu Beznea
In case the system suspends to a deep sleep state where power to DMA controller is cut-off we need to restore the content of GRWS register. This is a write only register and writing bit X tells the controller to suspend read and write requests for channel X. Thus set GRWS before restoring the content of GE (Global Enable) regiter. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-5-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: do not resume channels paused by consumersClaudiu Beznea
In case there are DMA channels not paused by consumers in suspend process (valid on AT91 SoCs for serial driver when no_console_suspend) the driver pauses them (using at_xdmac_device_pause() which is also the same function called by dmaengine_pause()) and then in the resume process the driver resumes them calling at_xdmac_device_resume() which is the same function called by dmaengine_resume()). This is good for DMA channels not paused by consumers but for drivers that calls dmaengine_pause()/dmaegine_resume() on suspend/resume path this may lead to DMA channel being enabled before the IP is enabled. For IPs that needs strict ordering with regards to DMA channel enablement this will lead to wrong behavior. To fix this add a new set of functions at_xdmac_device_pause_internal()/at_xdmac_device_resume_internal() to be called only on suspend/resume. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-4-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: fix imbalanced runtime PM reference counterClaudiu Beznea
In case there are channels not paused during suspend (which on AT91 case is valid for serial driver when no_console_suspend boot argument is used) the at_xdmac_runtime_suspend_descriptors() was called more than one time due to at_xdmac_off(). To fix this add a new argument to at_xdmac_off() to specify if runtime PM reference counter needs to be decremented for queued active descriptors. Along with it moved the at_xdmac_runtime_suspend_descriptors() call under at_xdmac_chan_is_paused() check on suspend path as for the rest of channels the suspend is delayed by atmel_xdmac_prepare() in case channel is enabled. Same approach has been applied on resume path. Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-3-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: at_xdmac: disable/enable clock directly on suspend/resumeClaudiu Beznea
Runtime PM APIs for at_xdmac just plays with clk_enable()/clk_disable() letting aside the clk_prepare()/clk_unprepare() that needs to be executed as the clock is also prepared on probe. Thus instead of using runtime PM force suspend/resume APIs use clk_disable_unprepare() + pm_runtime_put_noidle() on suspend and clk_prepare_enable() + pm_runtime_get_noresume() on resume. This approach as been chosen instead of using runtime PM force suspend/resume with clk_unprepare()/clk_prepare() as it looks simpler and the final code is better. While at it added the missing pm_runtime_mark_last_busy() on suspend before decrementing the reference counter. Fixes: 650b0e990cbd ("dmaengine: at_xdmac: add runtime pm support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230214151827.1050280-2-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: dw-axi-dmac: Increase polling time to DMA transmission completion ↵Walker Chen
status The bit DMAC_CHEN[0] is automatically cleared by hardware to disable the channel after the last AMBA transfer of the DMA transfer to the destination has completed. Software can therefore poll this bit to determine when this channel is free for a new DMA transfer. This time requires at least 40 milliseconds on JH7110 SoC, otherwise an error message 'failed to stop' will be reported. Signed-off-by: Walker Chen <walker.chen@starfivetech.com> Link: https://lore.kernel.org/r/20230322094820.24738-4-walker.chen@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMAWalker Chen
Add DMA reset operation in device probe and use different configuration on CH_CFG registers according to match data. Update all uses of of_device_is_compatible with of_device_get_match_data. Signed-off-by: Walker Chen <walker.chen@starfivetech.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20230322094820.24738-3-walker.chen@starfivetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: dw-edma: Fix to enable to issue dma request on DMA processingShunsuke Mie
The issue_pending request is ignored while driver is processing a DMA request. Fix to issue the pending requests on any dma channel status. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: dw-edma: Fix to change for continuous transferShunsuke Mie
The dw-edma driver stops after processing a DMA request even if a request remains in the issued queue, which is not the expected behavior. The DMA engine API requires continuous processing. Add a trigger to start after one processing finished if there are requests remain. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dmaengine: qcom_hidma: Add explicit platform_device.h and of_device.h includesRob Herring
qcom_hidma uses of_dma_configure() which is declared in of_device.h. platform_device.h and of_device.h get implicitly included by of_platform.h, but that is going to be removed soon. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20230410232654.1561462-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-04-12dma: gpi: remove spurious unlock in gpi_ch_initDmitry Baryshkov
gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex. ===================================== WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted ------------------------------------- kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at: [<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release! other info that might help us debug this: 6 locks held by kworker/u16:0/9: #0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 #5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c stack backtrace: CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15 Hardware name: Google Pixel 3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0xa0/0xfc show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_unlock_imbalance_bug+0x130/0x148 lock_release+0x270/0x300 __mutex_unlock_slowpath+0x48/0x2cc mutex_unlock+0x20/0x2c gpi_alloc_chan_resources+0x108/0x5bc dma_chan_get+0x84/0x188 dma_get_slave_channel+0x5c/0x10c gpi_of_dma_xlate+0x110/0x1a0 of_dma_request_slave_channel+0x174/0x280 dma_request_chan+0x3c/0x2d4 geni_i2c_probe+0x544/0x63c platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 device_add+0x60c/0x7d8 of_device_add+0x44/0x60 of_platform_device_create_pdata+0x90/0x124 of_platform_bus_create+0x15c/0x3c8 of_platform_populate+0x58/0xf8 devm_of_platform_populate+0x58/0xbc geni_se_probe+0xf0/0x164 platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: apple-admac: Fix 'current_tx' not getting freedMartin Povišer
In terminate_all we should queue up all submitted descriptors to be freed. We do that for the content of the 'issued' and 'submitted' lists, but the 'current_tx' descriptor falls through the cracks as it's removed from the 'issued' list once it gets assigned to be the current descriptor. Explicitly queue up freeing of the 'current_tx' descriptor to address a memory leak that is otherwise present. Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: apple-admac: Set src_addr_widths capabilityMartin Povišer
Add missing setting of 'src_addr_widths', which is the same as for the other direction. Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: apple-admac: Handle 'global' interrupt flagsMartin Povišer
In addition to TX channel and RX channel interrupt flags there's another class of 'global' interrupt flags with unknown semantics. Those weren't being handled up to now, and they are the suspected cause of stuck IRQ states that have been sporadically occurring. Check the global flags and clear them if raised. Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: ti: k3-psil: Add PSI-L thread support for J784s4Apurva Nandan
Add psil thread IDs for J784s4 and include J784s4 in the set of "k3_soc_devices" in k3-psil.c. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> [vaishnav.a@ti.com: add MCSPI-TX and 3rd CSI2RX instance entries] Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> [j-choudhary@ti.com: add sa2ul entries, minor cleanups] Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20230308201513.116638-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: bestcomm: Use of_address_to_resource()Rob Herring
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230319163222.226377-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: dw-edma: remove unused readq_ch and writeq_ch functionsTom Rix
clang with W=1 reports drivers/dma/dw-edma/dw-edma-v0-core.c:162:20: error: unused function 'writeq_ch' [-Werror,-Wunused-function] static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, ^ drivers/dma/dw-edma/dw-edma-v0-core.c:185:19: error: unused function 'readq_ch' [-Werror,-Wunused-function] static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, ^ These functions and their wrapping macros are not used, so remove them. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230320234906.1730308-1-trix@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: ti: edma: remove unused edma_and functionTom Rix
clang with W=1 reports drivers/dma/ti/edma.c:321:20: error: unused function 'edma_and' [-Werror,-Wunused-function] static inline void edma_and(struct edma_cc *ecc, int offset, unsigned and) ^ This function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230320231209.1728940-1-trix@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: zynqmp_dma: Sync DMA and coherent masksHarini Katakam
Align ZDMA DMA as well as coherent memory masks to 44 bit. This is required when using >32 bit memory regions. Signed-off-by: Harini Katakam <harini.katakam@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230316093318.6722-1-harini.katakam@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: tegra-apb: remove unused tdma_read functionTom Rix
clang with W=1 reports drivers/dma/tegra20-apb-dma.c:236:19: error: unused function 'tdma_read' [-Werror,-Wunused-function] static inline u32 tdma_read(struct tegra_dma *tdma, u32 reg) ^ This function is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20230322121001.2569909-1-trix@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: ti: k3-udma: Workaround errata i2234Vignesh Raghavendra
Per [1], UDMA TR15 transactions may hang if ICNT0 is less than 64B Work around is to set EOL flag is to 1 for ICNT0. Since, there is no performance penalty / side effects of setting EOL flag event ICNTO > 64B, just set the flag for all UDMAP TR15 descriptors. [1] https://www.ti.com/lit/er/sprz455a/sprz455a.pdf Errata doc for J721E DRA829/TDA4VM Processors Silicon Revision 1.1/1.0 (Rev. A) Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> [j-choudhary@ti.com: minor cleanups] Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Link: https://lore.kernel.org/r/20230323120107.27638-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: sh: rz-dmac: Remove unused rz_dmac_chan.*_word_sizeGeert Uytterhoeven
The src_word_size and dst_word_size members of the rz_dmac_chan structure were never used, so they can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/021bdf56f1716276a55bcfb1ea81bba5f1d42b3d.1679910274.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: idxd: expose IAA CAP register via sysfs knobDave Jiang
Add IAA (IAX) capability mask sysfs attribute to expose to applications. The mask provides application knowledge of what capabilities this IAA device supports. This mask is available for IAA 2.0 device or later. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230303213732.3357494-3-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: idxd: reformat swerror output to standard Linux bitmap outputDave Jiang
SWERROR register is 4 64bit wide registers. Currently the sysfs attribute just outputs 4 64bit hex integers. Convert to output with %*pb format specifier. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230303213732.3357494-2-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: mv_xor_v2: Use some clk_ helper functions to simplify codeChristophe JAILLET
Use devm_clk_get_[optional_]enabled() instead of hand writing it. It saves some LoC. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/cc14e490f4e6002a17c9c7d283fe6a93179766c2.1679814350.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: mv_xor_v2: Fix an error code.Christophe JAILLET
If the probe is deferred, -EPROBE_DEFER should be returned, not +EPROBE_DEFER. Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/201170dff832a3c496d125772e10070cd834ebf2.1679814350.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: ti: k3-udma: Add system suspend/resume supportVignesh Raghavendra
The K3 platforms configure the DMA resources with the help of the TI's System Firmware's Device Manager(DM) over TISCI. The group of DMA related Resource Manager[1] TISCI messages includes: INTA, RINGACC, UDMAP, and PSI-L. This configuration however, does not persist in the DM after leaving from Suspend-to-RAM state. We have to restore the DMA channel configuration over TISCI for all configured channels when returning from suspend. The TISCI resource management calls for each DMA type (UDMA, PKTDMA, BCDMA) happen in device_free_chan_resources() and device_alloc_chan_resources(). In pm_suspend() we store the current udma_chan_config for channels that still have attached clients and call device_free_chan_resources(). In pm_resume() restore the udma_channel_config from backup and call device_alloc_chan_resources() for those channels. Drivers like CPSW that use k3-udma-glue already do their own DMA resource management so use the late system suspend/resume hooks. [1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/index.html#resource-management-rm Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> [g-vlaev@ti.com: Add patch description and config backup] [g-vlaev@ti.com: Supend only channels with clients] Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20230329155349.2566010-1-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31dmaengine: tegra: explicitly select DMA_VIRTUAL_CHANNELSMark Salter
Enabling TEGRA186_GPC_DMA will cause this build failure unless some other DMA driver which uses DMA_VIRTUAL_CHANNELS is enabled: ERROR: modpost: "vchan_dma_desc_free_list" [drivers/dma/tegra186-gpc-dma.ko] undefined! ERROR: modpost: "vchan_init" [drivers/dma/tegra186-gpc-dma.ko] undefined! ERROR: modpost: "vchan_tx_submit" [drivers/dma/tegra186-gpc-dma.ko] undefined! ERROR: modpost: "vchan_tx_desc_free" [drivers/dma/tegra186-gpc-dma.ko] undefined! ERROR: modpost: "vchan_find_desc" [drivers/dma/tegra186-gpc-dma.ko] undefined! make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1 Add an explicit select of DMA_VIRTUAL_CHANNELS to avoid this. Signed-off-by: Mark Salter <msalter@redhat.com> Link: https://lore.kernel.org/r/20230329172129.88403-1-msalter@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-31iommu: Remove ioasid infrastructureJason Gunthorpe
This has no use anymore, delete it all. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20230322200803.869130-8-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-03-31iommu/ioasid: Rename INVALID_IOASIDJacob Pan
INVALID_IOASID and IOMMU_PASID_INVALID are duplicated. Rename INVALID_IOASID and consolidate since we are moving away from IOASID infrastructure. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20230322200803.869130-7-jacob.jun.pan@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-03-23dmaengine: idxd: use const struct bus_type *Greg Kroah-Hartman
In the functions unbind_store() and bind_store(), a struct bus_type * should be a const one, as the driver core bus functions used by this variable are expecting the pointer to be constant, and these functions do not modify the pointer at all. Cc: dmaengine@vger.kernel.org Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230313182918.1312597-32-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-17dmaengine: xilinx: xdma: Fix some kernel-doc commentsYang Li
Make the description of @xdma_chan to @xchan to silence the warnings: drivers/dma/xilinx/xdma.c:283: warning: Function parameter or member 'xchan' not described in 'xdma_xfer_start' drivers/dma/xilinx/xdma.c:283: warning: Excess function parameter 'xdma_chan' description in 'xdma_xfer_start' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4051 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20230214010344.5354-1-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: idxd: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230307192655.874008-3-helgaas@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: ioat: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230307192655.874008-2-helgaas@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: ioat: use PCI core macros for PCIe CapabilityBjorn Helgaas
The PCIe Capability is defined by the PCIe spec, so use the PCI_EXP_DEVCTL macros defined by the PCI core instead of defining copies in IOAT. This makes it easier to find all uses of the PCIe Device Control register. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230307214615.887354-1-helgaas@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: Actually use devm_add_action_or_reset()Andy Shevchenko
It appears that the commit a1beaa50b583 ("dmaengine: Simplify dmaenginem_async_device_register() function") mentions devm_add_action_or_reset() the actual change utilised devm_add_action() call by mistake. Fix the issue by switching to devm_add_action_or_reset(). Fixes: a1beaa50b583 ("dmaengine: Simplify dmaenginem_async_device_register() function") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230213112138.32118-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144704.1541976-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: imx-dma: Remove a redundant memset() callChristophe JAILLET
The desc->desc structure is already zeroed when 'desc' is kzalloc()'ed. There is no need to clear it twice. Remove the redundant memset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/95a81d623bffde2e5d14e22fad7e8c9a9a7203f6.1678743528.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-03-17dmaengine: sh: rz-dmac: Add reset supportBiju Das
Add reset support for DMAC module found on RZ/G2L alike SoCs. For booting the board, reset release of the DMAC module is required otherwise we don't get GIC interrupts. Currently the reset release was done by the bootloader now move this to the driver instead. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230315064501.21491-1-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-02-24Merge tag 'dmaengine-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "A new driver, couple of device support and binding conversion along with bunch of driver updates are the main features of this. New hardware support: - TI AM62Ax controller support - Xilinx xdma driver - Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller Updates: - Runtime pm support for at_xdmac driver - IMX sdma binding conversion to yaml and HDMI audio support - IMX mxs binding conversion to yaml" * tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits) dmaengine: idma64: Update bytes_transferred field dmaengine: imx-sdma: Set DMA channel to be private dmaengine: dw: Move check for paused channel to dwc_get_residue() dmaengine: ptdma: check for null desc before calling pt_cmd_callback dmaengine: dw-axi-dmac: Do not dereference NULL structure dmaengine: idxd: Fix default allowed read buffers value in group dmaengine: sf-pdma: pdma_desc memory leak fix dmaengine: Simplify dmaenginem_async_device_register() function dmaengine: use sysfs_emit() to instead of scnprintf() dmaengine: Make an order in struct dma_device definition dt-bindings: dma: cleanup examples - indentation, lowercase hex dt-bindings: dma: drop unneeded quotes dmaengine: xilinx: xdma: Add user logic interrupt support dmaengine: xilinx: xdma: Add xilinx xdma driver dmaengine: drivers: Use devm_platform_ioremap_resource() dmaengine: at_xdmac: remove empty line dmaengine: at_xdmac: add runtime pm support dmaengine: at_xdmac: align properly function members dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs dmaengine: sun6i: Set the maximum segment size ...
2023-02-24Merge tag 'pci-v6.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 00:41:23 +0000