summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2023-01-18clk: qcom: cpu-8996: skip ACD init if the setup is validDmitry Baryshkov
Check whether L2 registers contain correct values and skip programming if they are valid. This follows the code present downstream. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-7-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: cpu-8996: support using GPLL0 as SMUX inputDmitry Baryshkov
In some cases the driver might need using GPLL0 to drive CPU clocks. Bring it in through the sys_apcs_aux clock. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-6-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: cpu-8996: fix the init clock rateDmitry Baryshkov
Current multiplier (60) results in CPU getting the rate which is unlisted in the CPU frequency tables (60 * 19.2 = 1152 MHz). This results in warnings from the cpufreq during startup. Change PLL programming (l = 54) to init CPU clocks to start with the frequency of 54 * 19.2 = 1036.8 MHz which is supported by both power and performance clusters from all speed bins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-5-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: cpu-8996: correct PLL programmingDmitry Baryshkov
Change PLL programming to follow the downstream setup. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-4-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if requiredDmitry Baryshkov
Program PLL_TEST and PLL_TEST_U registers if required by the pll configuration. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113120544.59320-3-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: Add QDU1000 and QRU1000 GCC supportTaniya Das
Add Global Clock Controller (GCC) support for QDU1000 and QRU1000 SoCs. Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> [bjorn: Made gcc_pcie_0_pipe_clk_src use clk_regmap_phy_mux_ops] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230112204446.30236-3-quic_molvera@quicinc.com
2023-01-18clk: qcom: mmcc-apq8084: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Note, the system names for xo clocks were changed from "xo" to "xo_board" to follow the example of other platforms. This switches the clocks to use DT-provided "xo_board" clock instead of manually registered "xo" clock and allows us to drop qcom_cc_register_board_clk() call from the driver at some point. In the same way change the looked up system "sleep_clk_src" clock to "sleep_clk", which is registered from DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-12-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: mmcc-apq8084: remove spdm clocksDmitry Baryshkov
SPDM is used for debug/profiling and does not have any other functionality. These clocks can safely be removed. Suggested-by: Stephen Boyd <sboyd@kernel.org> Suggested-by: Georgi Djakov <djakov@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-11-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: mmcc-apq8084: move clock parent tables downDmitry Baryshkov
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-10-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: mmcc-apq8084: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-9-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: gcc-apq8084: add GCC_MMSS_GPLL0_CLK_SRCDmitry Baryshkov
Add the GCC_MMSS_GPLL0_CLK_SRC, the branch clock gating gpll0 clock for the multimedia subsystem. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-8-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: gcc-apq8084: use parent_hws/_data instead of parent_namesDmitry Baryshkov
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Note, the system names for xo clocks were changed from "xo" to "xo_board" to follow the example of other platforms. This switches the clocks to use DT-provided "xo_board" clock instead of manually registered "xo" clock and allows us to drop qcom_cc_register_board_clk() call from the driver at some point. In the same way change the looked up system "sleep_clk_src" clock to "sleep_clk", which is registered from DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-7-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: gcc-apq8084: move PLL clocks upDmitry Baryshkov
Move PLL clock declarations up, before clock parent tables, so that we can use pll hw clock fields in the next commit. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-6-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: gcc-apq8084: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-5-dmitry.baryshkov@linaro.org
2023-01-18clk: qcom: ipq8074: populate fw_name for usb3phy-sRobert Marko
Having only .name populated in parent_data for clocks which are only globally searchable currently will not work as the clk core won't copy that name if there is no .fw_name present as well. So, populate .fw_name for usb3phy clocks in parent_data as they were missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230108130440.670181-1-robimarko@gmail.com
2023-01-18clk: qcom: add the GCC driver for sa8775pShazad Hussain
Add support for the Global Clock Controller found in the QTI SA8775P platforms. Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com> [Bartosz: made the driver ready for upstream] Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Moved to core_initcall(), per request of Konrad] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117180429.305266-3-brgl@bgdev.pl
2023-01-18clk: vc5: Add support for 5P49V60Lars-Peter Clausen
The 5P49V60 is very similar to the existing supported clock chips of the versaclock5 driver and uses the same register map layout. But its maximum VCO frequency is 2.7 GHz instead of 3 GHz for the other supported devices. Add a vco_max field to the chip info field to allow to specify a per device variant maximum VCO frequency. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230114233500.3294789-2-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-01-18clk: vc5: Use `clamp()` to restrict PLL rangeLars-Peter Clausen
The VCO frequency needs to be within a certain range and the driver enforces this. Make use of the clamp macro to implement this instead of open-coding it. This makes the code a bit shorter and also semanticly stronger. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230114233500.3294789-1-lars@metafoo.de Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-01-17clk: qcom: smd-rpm: msm8936: Add PMIC gated RPM_SMD_XO_*Bryan O'Donoghue
The XO crystal input is buffered through the PMIC and controlled by RPM. Create the relevant clock gate representation in the RPM clock definitions. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117024846.1367794-5-bryan.odonoghue@linaro.org
2023-01-17clk: qcom: rpmh: remove duplicate IPA clock referenceArnd Bergmann
One of the ones that were recently added was already there: drivers/clk/qcom/clk-rpmh.c:578:35: error: initialized field overwritten [-Werror=override-init] 578 | [RPMH_IPA_CLK] = &clk_rpmh_ipa.hw, Fixes: aa055bf158cd ("clk: qcom: rpmh: define IPA clocks where required") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117170217.2462320-1-arnd@kernel.org
2023-01-17soc: renesas: r9a06g032-sysctrl: Handle h2mode setting based on USBF presenceHerve Codina
The CFG_USB[H2MODE] allows to switch the USB configuration. The configuration supported are: - One host and one device or - Two hosts Set CFG_USB[H2MODE] based on the USBF controller (USB device) availability. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230105152257.310642-3-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-16clk: qcom: Remove need for clk_ignore_unused on sc8280xpBjorn Andersson
With the transition of disabling unused clocks at sync_state, rather than late_initcall() it's now possible to drop clk_ignore_unused and unused clock disabled once client drivers have probed. Do this on SC8280XP. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230113041038.4188995-1-quic_bjorande@quicinc.com
2023-01-16clk: samsung: remove s3c24xx specific pll bitsArnd Bergmann
With the s3c24xx clk driver gone, the portions of the pll driver for it can also be removed. Suggested-by: Chanwoo Choi <cwchoi00@gmail.com> Link: https://lore.kernel.org/linux-arm-kernel/0e0eff12-d8ea-72e9-d135-4259dda9a750@gmail.com/ Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-16clk: remove s3c24xx driverArnd Bergmann
The s3c24xx platform is gone, so the clk driver can be removed as well. Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-13clk: meson: clk-cpu-dyndiv: switch from .round_rate to .determine_rateMartin Blumenstingl
clk_ops.round_rate will be removed at some point. It's replacement is .determine_rate. Switch clk-cpu-dyndiv over to use .determine_rate. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20221225212632.2760126-5-martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-01-13clk: meson: sclk-div: switch from .round_rate to .determine_rateMartin Blumenstingl
clk_ops.round_rate will be removed at some point. It's replacement is .determine_rate. Switch sclk-div over to use .determine_rate. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20221225212632.2760126-4-martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-01-13clk: meson: dualdiv: switch from .round_rate to .determine_rateMartin Blumenstingl
clk_ops.round_rate will be removed at some point. It's replacement is .determine_rate. Switch clk-dualdiv over to use .determine_rate. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20221225212632.2760126-3-martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-01-13clk: meson: mpll: Switch from .round_rate to .determine_rateMartin Blumenstingl
clk_ops.round_rate will be removed at some point. It's replacement is .determine_rate. Switch clk-mpll over to use .determine_rate. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20221225212632.2760126-2-martin.blumenstingl@googlemail.com Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2023-01-13cpuidle, clk: Remove trace_.*_rcuidle()Peter Zijlstra
OMAP was the one and only user. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230112195541.844982902@infradead.org
2023-01-12clk: renesas: cpg-mssr: Fix use after free if cpg_mssr_common_init() failedAlexey Khoroshilov
If cpg_mssr_common_init() fails after assigning priv to global variable cpg_mssr_priv, it deallocates priv, but cpg_mssr_priv keeps dangling pointer that potentially can be used later. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f7db7bbf031 ("clk: renesas: cpg-mssr: Add early clock support") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1671806417-32623-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-01-12clk: renesas: r9a07g044: Add clock and reset entries for CRULad Prabhakar
Add CRU clock and reset entries to CPG driver. CRU_SYSCLK and CRU_VCLK clocks need to be turned ON/OFF in particular sequence for the CRU block hence add these clocks to r9a07g044_no_pm_mod_clks[] array and pass it as part of CPG data for both RZ/G2L and RZ/V2L SoCs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221221212703.348278-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-01-12clk: remove davinci dm3xx driversArnd Bergmann
The davinci dm3xx machines are all removed, so the clk driver is no longer needed. The da8xx platforms are now using DT exclusively, so those drivers remain untouched. Reviewed-by: David Lechner <david@lechnology.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-12ARM: davinci: drop DAVINCI_DMxxx referencesArnd Bergmann
Support for all the dm3xx/dm64xx SoCs is no longer available, so drop all other references to those. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-11clk: qcom: rpmh: define IPA clocks where requiredDmitry Baryshkov
Follow the example of sc7180 and sdx55 and implement IP0 resource as clocks rather than interconnects. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230109002935.244320-11-dmitry.baryshkov@linaro.org
2023-01-11drivers/clk: Remove "select SRCU"Paul E. McKenney
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: <linux-clk@vger.kernel.org> Link: https://lore.kernel.org/r/20230105003813.1770367-9-paulmck@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-01-11clk: qcom: camcc-sm6350: Make camcc_sm6350_hws staticKonrad Dybcio
There's no reason for it not to be static, and some compilers don't like not it being that way. Make it so. Reported-by: kernel test robot <lkp@intel.com> Fixes: 80f5451d9a7c ("clk: qcom: Add camera clock controller driver for SM6350") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230107120434.1902666-1-konrad.dybcio@linaro.org
2023-01-10clk: qcom: gcc-msm8974: switch from sleep_clk_src to sleep_clkDmitry Baryshkov
gcc-msm8974 uses the registered sleep_clk_src clock, which is just a 1:1 fixed factor clock register on top of the board's sleep_clk. Switch the driver to use the board sleep_clk directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228203725.3131237-1-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: mmcc-msm8998: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-16-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-sdx55: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-13-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-sdx55: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data/names/hws easy and errorproof. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-12-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-sc7180: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-11-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-msm8998: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-10-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: dispcc-qcm2290: get rid of test clockDmitry Baryshkov
The test clock apparently it's not used by anyone upstream. Remove it. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228185237.3111988-9-dmitry.baryshkov@linaro.org
2023-01-10clk: gcc-sm8350: drop PLL test clockKrzysztof Kozlowski
There is no user of core_bi_pll_test_se test clock so drop it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228140917.118861-3-krzysztof.kozlowski@linaro.org
2023-01-10clk: gcc-sm8150: drop PLL test clockKrzysztof Kozlowski
There is no user of core_bi_pll_test_se test clock so drop it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221228140917.118861-2-krzysztof.kozlowski@linaro.org
2023-01-10clk: qcom: clk-spmi-pmic-div: convert to use parent_dataDmitry Baryshkov
The clk-spmi-pmic-div driver gets the parent name from the first (and the only) clock parent. So, use parent data, index 0 to setup the clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210191013.453040-1-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: gcc-sm6375: use parent_hws for gcc_disp_gpll0_div_clk_srcDmitry Baryshkov
Change gpll0 to use parent_hws instead of parent_names for gcc_disp_gpll0_div_clk_src clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210190712.451247-2-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: dispcc-sm6115: use parent_hws for disp_cc_mdss_rot_clkDmitry Baryshkov
Rework disp_cc_mdss_rot_clk to use parent_hws instead of parent_names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210190712.451247-1-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: videocc-sm8250: switch to devm_pm_runtime_enableDmitry Baryshkov
Switch to using the devm_pm_runtime_enable() instead of hand-coding corresponding action to call pm_runtime_disable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103145515.1164020-22-dmitry.baryshkov@linaro.org
2023-01-10clk: qcom: lpasscc-sc7280: switch to devm_pm_runtime_enableDmitry Baryshkov
Switch to using the devm_pm_runtime_enable() instead of hand-coding corresponding action to call pm_runtime_disable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230103145515.1164020-21-dmitry.baryshkov@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:39:43 +0000